Nortek Security and Control 00171 Combo Smoke CO Sensor User Manual
Nortek Security & Control LLC Combo Smoke CO Sensor
User Manual
GoControl Combination Photoelectric Smoke
and Carbon Monoxide Alarm
GENERAL INFORMATION
Thank you for purchasing this GoControl Combination Smoke/CO Alarm.
This model is battery operated and features an “Alarm Hush” to temporarily silence nuisance
alarms.
IMPORTANT: Please take a few minutes to thoroughly read this user’s guide which should
be saved for future reference and passed on to any subsequent owner.
Teach children how to respond to the Smoke/Co and that they should never play with the unit.
1. This Smoke/CO was designed to detect both smoke and carbon monoxide from any
source of combustion in a residential environment. It is not designed for use in a
recreational vehicle (RV) or boat.
For your convenience, write down the following information. If you call Product Support,
these are the first questions you will be asked.
Smoke/CO Model Number: C-SMKTCO1-B (located on back of Smoke/CO).
Date Code: (located on back of Smoke/CO) The National Fire Protection Association (NFPA)
and the manufacturer recommend replacing this Smoke/CO ten (10) years from the date
code as it has a ten-year life when powered.
Box Contents
Verify that the package includes the following:
• 1―Combination Smoke/CO with 2 (two) batteries installed
• 2―Plastic wall anchors
• 2―Phillips Screws
• 1―This User's Guide
Installation Tools Required
• Phillips Screw Driver
• Variable Speed Drill with 3/16” Drill Bit
• Flat Blade Tool (optional)
Smoke and CO Description & Function Recommended Locations for Smoke/CO Alarms
•Locate the smoke alarms in all sleeping areas. Try to monitor the exit path as the
bedrooms are usually farthest from the exit. If more than one sleeping area exists,
locate additional Smoke/CO alarms in each sleeping area.
•Locate additional Smoke/CO alarms to monitor any stairway as stairways act like
chimneys for smoke and heat.
• Locate at least one Smoke/CO alarm on every floor level.
• Locate a Smoke/CO alarm in every bedroom.
Recommended Locations for Smoke/CO
Alarms (Cont.)
•Locate an additional Smoke/CO alarm in every room where electrical appliances are
operated (i.e. portable heaters or humidifiers).
•Locate an additional Smoke/CO alarm in every room where someone sleeps with
the door closed. The closed door may prevent an alarm not located in that room from
waking the sleeper.
• Smoke, heat, and combustion products rise to the ceiling and spread horizontally. Mounting
the additional Smoke/CO alarm on the ceiling in the center of the room places it closest to
Recommended Locations for Smoke/CO Alarms (Cont.)
•all points in the room. Ceiling mounting is preferred in ordinary residential construction.
• For mobile home installation, select locations carefully to avoid thermal barriers that may form at
the ceiling. For more details, see MOBILE HOME INSTALLATION section.
• When mounting an alarm on the ceiling, locate it at a minimum of 4” (10 cm) from the side wall.
•When mounting the Smoke/CO alarm on the wall, use an inside wall with the top edge
of the alarm at a minimum of 4” (10 cm) and a maximum of 12” (30.5 cm) below the
ceiling. Put Smoke/CO alarms at both ends of a bedroom hallway or large room if the
hallway or room is more than 30 feet (9.1 m) long.
•Install Smoke/CO Alarms on sloped, peaked or cathedral ceilings at or within 3ft
(0.9m) of the highest point (measured horizontally).
This equipment should be installed in accordance with the National Fire Protection Association’s
72 (National Fire Protection Association, Batterymarch Park, Quincy, MA 02269).
Locations to Avoid
• In the garage. Products of combustion are present when you start your automobile.
•Normal cooking may cause nuisance alarms. If a kitchen Smoke/CO alarm is desired,
it should have an alarm silence feature or be a photoelectric type.
• Do not install within 6 ft. of heating or cooking appliances.
• Less than 4” (10cm) from the peak of an “A” frame type ceiling.
•In an area where the temperature may fall below 40ºF (4.4˚C) or rise above 100ºF
(37.7˚C), such as garages and unfinished attics.
• In dusty areas. Dust particles may cause nuisance alarms or failure to alarm.
• In very humid areas. Moisture or steam can cause nuisance alarms.
• In insect-infested areas.
•Smoke/CO alarms should not be installed within 3 ft (.9m) of the door to a bathroom
containing a tub or shower, forced air supply ducts used for heating or cooling, ceiling
or whole house ventilating fans, or other high air flow areas.
• Near fluorescent lights. Electronic “noise” may cause nuisance alarms.
•Smoke/CO alarms are not to be used with detector guards unless the combination
(alarm and guard) has been evaluated and found suitable for that purpose.
•Do not install near vents, flues, chimneys or any forced/unforced air ventilation
openings.
• Do not install near fans, doors, windows or areas directly exposed to the weather.
Locations to Avoid (Cont.)
•Modern prefabricated homes or fixed mobile homes have been designed and built
to be energy efficient. Install Smoke/CO alarms as recommended above. In older
mobile homes that are not well insulated compared to present standards, extreme
heat or cold can be transferred from the outside to the inside through poorly insulated
walls and roof. This may create a thermal barrier which can prevent the smoke from
reaching an alarm mounted on the ceiling. In such units, install the Smoke/CO alarm
on an inside wall with the top edge of the alarm a minimum of 4” (10 cm) and a
maximum of 12” (30.5 cm) below the ceiling. If you are not sure about the insulation in
your mobile home, or if you notice that the outer walls and ceiling are either hot or cold
compared to the room air temperature, install the Smoke/CO alarm on an inside wall.
NFPA 72 (National Fire Protection Association) requires smoke alarms be installed in
each sleeping area.
•WARNING: Test your Smoke/CO operation after mobile home has been in storage or
unoccupied and at least once a week during use.
Installation Instructions
Attaching Mounting Plate
1. Choose a mounting location (wall or ceiling) and using the mounting plate provided as
a template, mark hole locations.
2. Install the two (2) provided screws through the mounting plate and tighten. DO NOT
over-tighten screws. (If mounting in plasterboard or similar surface, drill 3/16” holes
and use the plastic anchors provided.) Anchors are not required for mounting on hard
surfaces such as wood.
Activating and Pairing the Smoke/CO Alarm
1. First set the control panel to pairing mode.
2. To set the Smoke/Co alarm to pairing mode, remove the battery activation tab that
protrudes from the back of the Alarm (See Figure 7) by pulling until it is completely out
of the battery compartment.
3. The green LED blinks (See Figure 7) three (3) times every five (5) seconds to indicate
that the Smoke/CO alarm is searching for the control panel.
✓NOTE: If Smoke/CO alarm pairing is not successful after pulling the battery tab,
press the tamper switch to restart the pairing procedure.
4. Complete the pairing procedure on the control panel. See the pairing instructions in the
control panel's installation guide for details.
✓NOTE: Pairing must be performed before installation.
Activating and Pairing the Smoke/CO Alarm (Cont.)
After the installation a good link to the panel is displayed when the Received Signal Strength
Indicator (RSSI) indicated on the panel is higher than - 70dBm and the Link Quality Indicator
(LQI) is stronger than 250. If the RSSI and LQI values are lower, you must change the
location of the detector.
Align the Smoke/CO alarm with the mounting plate and rotate clockwise (right) approximately
60° until the unit stops and clicks into place. DO NOT over-tighten. If the unit needs to be
re-aligned, rotate the Smoke/CO alarm counterclockwise, remove and rotate to desired
alignment.
✓NOTE: The Smoke/CO will mount to the plate in six (6) positions (every
60 degrees). Do not over tighten the Smoke/CO as damage to alarm or
mounting surface may occur.
The Smoke/CO is now activated! After installation/activation, test your alarm as described in
Operation and Testing section.
Activating and Pairing the Smoke/CO Alarm (Cont.)
WARNING: Failure to properly install and activate this alarm will prevent proper operation
and will prevent its response to fire hazards.
Operation and Testing
The Smoke/CO is operating once it is activated and testing is complete.
When products of combustion are sensed, the unit sounds a loud 85db pulsating alarm
accompanied by the blinking red LED light until the air is cleared.
The carbon monoxide (CO) alarm monitors the air for the presence of CO. It will alarm when
there are high levels of CO present, and when there are low levels of CO present over a
longer period of time. When a CO condition matches either of these situations, the alarm will
sound, and be accompanied by the blinking red LED light.
The CO sensor meets the alarm response time as follows:
• At 70 PPM, the unit must alarm within 60-240 minutes.
• At 150 PPM, the unit must alarm within 10-50 minutes.
• At 400 PPM, the unit must alarm within 4-15 minutes
Testing:
5. Before testing, put the panel into the appropriate mode or notify the central station in
order to prevent a response from the central station/fire department.
6. Smoke Test: Press the test/hush button for (3) three seconds, the detector will chirp
once, then release. The unit will then blink a red LED every second, while the sounder
will sound two T3 cycles. A functional test of the Smoke sensor may also be completed
by exposing the sensor to sufficient smoke levels.
7. CO Test: Press the test/hush button for (6) six seconds, the detector will chirp once at 3 seconds
and twice at 6 seconds, then release. The unit's LED will then show a red double-blink every (2)
two seconds and the sounder will sound (2) two T4 cycles. A functional test of the CO sensor may
also be completed by exposing the sensor to CO levels above 100ppm. If the LEDs do not blink
and/or if alarm does not sound, the unit must be replaced.
Operation and Testing (Cont.)
WARNING: Due to the loudness (85 decibels) of the alarm, always stand an arm’s length
(about 2.5 feet) away from the unit or use ear protection when testing.
Weekly testing is required to ensure proper operation. Erratic or low volume sound (or no sound)
coming from your alarm may indicate a defective alarm and it should be returned for service.
WARNING: DO NOT use an open flame to test your Smoke/CO, you could damage the
alarm or ignite combustible materials and start a structure fire.
WARNING: To reduce the risk of carbon monoxide poisoning, test Smoke/CO operation
when not in use for 10 days or more.
CAUTION: The Smoke/CO alarm only indicates the presence of carbon monoxide at the
sensor. Carbon monoxide gas may be present in other areas.
The following table describes the visual and audible alarm conditions the unit may encounter
and illustrates how the unit will indicate normal standby, alarm and error conditions.
Alarm Visual and Audible Indicators
ON Network OFF Network*
Status LED Indicators Sounder
Power Up All LED's blink Chirp sounder Chirp sounder
Alarm Silenced Red LED blinks every 1 sec
(fire) or double blinks every 2
sec (CO)
Sounder silent Sounder silent
Fire (Smoke/Heat) Alarm Red LED blinks every 1 sec Active Sounder T3 Active Sounder T3
Remote Fire Alarm Blue LED blinks every 1 sec Active Sounder
T3
NA
CO Alarm Red LED double blinks every
2 sec
Active Sounder T4 Activate Sounder T4
Remote CO Alarm Blue LED double blinks every
2 sec
Activate Sounder
T4
NA
Test Button held for 3sec (Fire) Red LED blinks every 1 sec Chirp once then
activate two cycles
of Sounder T3
Chirp once then activate
two cycles of Sounder T3
Test Button held for 6sec (CO) Red LED double blinks every
2 sec
Chirp once at 3
sec and twice at
6 seconds then
activate two cycles
of Sounder T4
Chirp once at 3 seconds
and twice at 6 sec then
activate two cycles of
Sounder T4
Hush chirp Amber LED blinks per fails Sounder silent Sounder silent
Locate Device Green LED blinks every 3 sec Chirp sounder
every 5 sec
NA
ON Network OFF Network*
Status LED Indicators Sounder
Fault Amber LED double blinks
every 30 sec
Sounder silent Chirp sounder every
45 sec
Detector End of Life (10 years) Amber LED blinks 5 times
every 60 sec
Sounder silent Chirp sounder every
45 sec
Low Battery Amber LED blinks every 15 sec Sounder silent Chirp sounder every
45 sec
Tamper (Off base) Amber then Green LEDs blink
every 30 sec
Chirp Sounder every
5 sec after 20 sec
delay
Chirp Sounder every 5
sec after 20 sec delay
Normal Operation Green LED blinks every 60 sec Sounder silent Sounder silent
Firmware Update Active No effect No effect NA
*OFF Network is when the Smoke/CO is not connected to a system and is operating as an
isolated unit.
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,C-SMKTCO1-B - P/N 10015389 X14 - INK: BLACK - MATERIAL: 16 LB. MEAD BOND - SIZE: 16.000" X 18.000"- TOL. +/- 0.125"- SCALE:1:1 - FOLDING: FOLD 4 X TO FINAL SIZE 4.000"X 4.500"- FINISH WITH LOGO SHOWING - SIDE 1 OF 2
AB C
A. SOUNDER
B. ALARM TEST/HUSH BUTTON
C. LED
TEST/HUSH
BUTTON
123
6
5
7
89
4
MOUNTING BASE
ANCHORS
SCREWS
SMOKE/COMBO
CO ALARM
Figure 3. Smoke/CO Locations
PAIRING
LED
TAMPER
SWITCH
REMOVE BATTERY
ACTIVATION TA B
PULL
Figure 7 Activating Smoke Combo CO Alarm
Figure 6. Attaching Smoke/CO to Mounting Plate.
MOUNTING BASE
SMOKE ALARM
Figure 8 Aligning and Mounting Smoke Alarm & Alarm Plate
Figure 4. Smoke/CO Alarm Locations
CEILING
SIDE
WALL
4"MIN.
4"MIN.
12" MAX.
BEST LOCATION
ACCEPTABLE
LOCATION
LOCATIONS PERMITTED FOR
SMOKE ALARMS ON TRAY SHAPED
CEILINGS
ANYWHERE ALONG THIS
BOLD SURFACE
Bedroom
Bedroom Bedroom
Kitchen Living
Room
Basement
Garage
Closed
Doors
(Gas Furnace)
SMOKE/CO LOCATIONS
SMOKE/CO
Hall
Figure 5 Smoke/CO Locations (Continued)
4.00"
3.00' 3.00'
SMOKE ALARM
ANYWHERE IN
THIS AREA
SMOKE ALARM
ANYWHERE IN
THIS AREA
3.00'
4.00"
Lor
ANCHORS (2)
SCREWS (2)
SMOKE / CO
MOUNTING BASE
Figure 1. Combo Smoke/CO Components Figure 2. Combo Smoke/CO Description & Function
Figure 9 Activating Test/Hush Button
CO Poisoning
Initial carbon monoxide poisoning symptoms are similar to the flu with no fever and can
include dizziness, severe headaches, nausea, vomiting and disorientation. Everyone is
susceptible but experts agree that unborn babies, pregnant women, senior citizens and
people with heart or respiratory problems are especially vulnerable. If symptoms of carbon
monoxide poisoning are experienced seek medical attention immediately. CO poisoning can
be determined by a carboxyhemoglobin test.
Symptoms
The following symptoms are related to CARBON MONOXIDE POISONING and should be
discussed with ALL members of the household:
1. Mild Exposure: Slight headache, nausea, vomiting, fatigue (often described as “Flu-
like” symptoms).
2. Medium Exposure: Severe throbbing headache, drowsiness, confusion, fast heart rate.
3. Extreme Exposure: Unconsciousness, convulsions, cardio respiratory failure and
death.
The above levels of exposure relate to healthy adults. Levels differ for those at high risk.
Exposure to high levels of carbon monoxide can be fatal or cause permanent damage and
disabilities. Many cases of reported carbon monoxide poisoning indicate that while victims
are aware they are not feeling well, they become so disoriented they are unable to save
themselves by either exiting the building, or calling for assistance. Also, young children and
household pets may be the first effected. Familiarization with the effects of each level is
important.
Cleaning Your Smoke/CO Alarm
Your Smoke/CO Should be Cleaned at Least Once a Year
•You can clean the interior of your Smoke/CO (sensing chamber) by using compressed
air or a vacuum cleaner hose and blowing or vacuuming through the openings around
the perimeter of the alarm. The outside of the Smoke/CO alarm can be wiped with a
damp cloth. Use only water to dampen the cloth, use of detergents or cleaners could
damage the Smoke/CO.
•After cleaning, test your Smoke/CO by using the test button. If cleaning does not
restore the Smoke/CO to normal operation, the Smoke/CO should be replaced.
• Never use detergent or other solvents to clean the unit.
• Avoid spraying air freshener, hair spray, or other aerosols near the alarm.
•Do not paint the unit. Paint will seal the vents and interfere with the sensor’s ability to
detect smoke and CO.
•Never attempt to disassemble the unit or clean inside. This action will void your
warranty.
•The following substances can affect the CO sensor and may cause false readings
and damage to the sensor: Methane, propane, isobutane, iso-propanol, ethyl acetate,
hydrogen sulfide, sulfide dioxides, alcohol based products, paints, thinner, solvents,
adhesives, hair spray, after shave, perfume, and some cleaning agents.
•Move the Smoke/CO and place in another location prior to performing any of the
following:
• Staining or stripping wood floors or furniture
• Painting
Cleaning Your Smoke/CO Alarm (Cont.)
• Wall papering
• Using adhesives
•Storing the unit in a plastic bag during any of the above projects will protect the
sensors from damage. When household cleaning supplies or similar contaminates
are used, the area must be well ventilated
WARNING: Reinstall the Smoke/CO as soon as possible to assure continuous protection.
Good Safety Habits
DEVELOP AND PRACTICE A PLAN OF ESCAPE
Prepare and practice a home escape plan twice a year, including drills at night. Know two
ways out of every room (door & window) and identify a meeting place outside the home
where everyone will gather once they have exited the residence. When two people have
reached the meeting place, one should leave to call 911 while the second person stays
to account for additional family members. Establish a rule that once you’re out, you never
reenter under any circumstance!
•Make a floor plan indicating all doors and windows and at least two (2) escape routes
from each room. Second story windows may need a rope or chain ladder.
•Have a family meeting and discuss your escape plan, showing everyone what to do in
case of fire and where to meet after they leave the house.
Good Safety Habits (Cont.)
• Ensure that small children hear the alarm and wake when it sounds. They must wake up in order
to execute the escape plan. Practice allows all occupants to test your plan before an emergency.
You may not be able to reach your children. It is important they know what to do.
•Familiarize everyone with the sound of the smoke/CO alarm and train them to leave
your home when they hear it.
•Current studies have shown Smoke/CO alarms may not awaken all sleeping
individuals, and that it is the responsibility of individuals in the household that are
capable of assisting others to provide assistance to those who may not be awakened
by the alarm sound, or to those who may be incapable of safely evacuating the area
unassisted.
•Install and maintain fire extinguishers on every level of the home and in the kitchen,
basement and garage. Know how to use a fire extinguisher prior to an emergency.
This alarm detects products of combustion using photoelectric technology and carbon
monoxide using an electrochemical cell. Many times throughout this User’s Guide, Carbon
Monoxide will be referred to as “CO.”
This alarm is acceptable for use near kitchens or cooking areas but can be used in all other
residential applications where a smoke or CO alarm is required.
After ten (10) years of cumulative power up, this unit will display an amber LED that blinks
five times every 60 seconds, with a sounder chirp every 45 seconds. This is an "operational
end of life" feature which will indicate that it is time to physically remove and replace the
alarm.
What To Do When The Alarm Sounds (Cont.)
• smoking in bed
• leaving children home alone
• cleaning with flammable liquids, such as gasoline
•If the escape route requires you to go through smoke, crawl low under the smoke
where the air is clearer.
What to do when the Alarm Sounds
SMOKE/CO ACTIVATION
Carbon monoxide (CO) alarm pattern is four quick beeps repeating every 5.4 seconds. After
initial four minutes of alarm the pattern many change to four quick beeps repeating once
every minute.
WARNING: Carbon monoxide alarm activation indicates the presence of Carbon Monoxide
(CO) at high concentrations which can kill you.
1. IMMEDIATELY MOVE TO FRESH AIR - OUTDOORS OR BY AN OPEN DOOR/
WINDOW. Do a head count to check that all persons are accounted for. Do not reenter
the premises nor move away from the open door/window until the emergency services
responders have arrived, the premises have been aired out, and your alarm remains
in its normal condition.
2. Call your emergency services (Fire Department or 911).
3. After following steps 1-2, if the alarm reactivates within a 24 hour period, repeat steps
1-2 and call a qualified appliance technician to investigate sources of CO from fuel
burning equipment and appliances, and to inspect for proper operation of equipment.
What To Do When the Alarm Sounds (Cont.)
If problems are identified during this inspection, have the equipment serviced immediately.
Note any combustion equipment not inspected by the technician and consult the
manufacturer’s instructions, or contact the manufacturer directly for more information about
CO safety and the equipment. Make sure that motor vehicles are not, or have not been,
operating in a garage attached or adjacent to the residence.
Never restart the source of a CO problem until it has been corrected.
Never ignore the sound of the alarm!
If the unit is sounding, pressing the Test/Hush button will terminate the sounder.
If the CO condition that caused the alarm in the first place continues: the unit will activate
in alarm mode.
GENERAL CARBON MONOXIDE (CO)
INFORMATION
Carbon monoxide (CO) is a colorless, odorless, and tasteless poison gas that can be fatal
when inhaled. CO inhibits the blood's capacity to carry oxygen.
POSSIBLE SOURCES OF CARBON MONOXIDE
Inside your home, appliances used for heating and cooking are the most likely sources of
CO. Vehicles running in attached garages can also produce dangerous levels of CO. CO can
be produced when burning any fossil fuel: gasoline, propane, natural gas, oil and wood. It
can be produced by any fuel-burning appliance that is malfunctioning, improperly installed,
or not ventilated correctly.
Possible sources include furnaces, gas ranges/stoves, gas clothes dryers, water heaters,
portable fuel burning space heaters, fireplaces, wood-burning stoves and certain swimming
pool heaters. Blocked chimneys or flues, back drafting and changes in air pressure, corroded
or disconnected vent pipes, or a loose or cracked furnace exchanger can also release CO
into your building. Vehicles and other combustion engines running in an attached garage
and using a charcoal/gas grill or hibachi in an enclosed area are all possible sources of CO.
The following conditions can result in transient CO situations:
Excessive spillage or reverse venting of fuel-burning appliances caused by outdoor ambient
conditions such as: wind direction and/or velocity, including high gusts of wind, heavy air in
the vent pipes (cold/humid air with extended periods between cycles), negative pressure
differential resulting from the use of exhaust fans, simultaneous operation of several fuel
GENERAL CARBON MONOXIDE (CO)
INFORMATION (CONT.)
burning appliances competing for limited internal air, vent pipe connections vibrating loose
from clothes dryers, furnaces, or water heaters, obstructions in, or unconventional, vent pipe
designs which can amplify the above situations, extended operation of unvented fuel-burning
devices (range, oven, fireplace, etc.), temperature inversions which can trap exhaust gases
near the ground, car idling in an open or closed attached garage, or near a home.
CO SAFETY TIPS
Every year, have the heating system, vents, chimney and flue inspected and cleaned by a
qualified technician. Always install appliances according to manufacturer’s instructions and
adhere to local building codes. Most appliances should be installed by professionals and
inspected after installation. Regularly examine vents and chimneys for improper connections,
visible rust, or stains, and check for cracks in furnace heat exchangers. Verify that the color
of flame is blue on pilot lights and burners. A yellow or orange flame is a sign that the fuel is
not burning completely and may be releasing CO. Teach all household members what the
alarm sounds like and how to respond. Fire Departments, most utility companies and HVAC
contractors will perform CO inspections, some may charge for this service. It’s advisable to
inquire about any applicable fees prior to having the service performed. The manufacturer
of this product will not pay for, or reimburse the owner or user of this product, for any repair
or dispatch calls related to the alarm sounding. Individuals with medical problems should
consider using detection devices with improved COHb level sensitivity.
Nuisance Alarms
This smoke alarm is designed to minimize nuisance alarms. Cigarette smoke will not normally
cause the unit to alarm, unless the smoke is blown directly into the alarm. Combustion
particles from cooking may set off the alarm if it is located too close to a cooking appliance.
Large quantities of combustible particles are generated from spills or when broiling. Using
the fan on a range hood which vents to the outside (non-recirculating type) will also help
remove these combustible products from the kitchen.
If the alarm does sound the smoke alarm pattern of (3) three long beeps, check for fires first.
If a fire is discovered, get out and call the fire department. If no fire is present, check to see if
one of the reasons listed in “Locations to avoid” may have caused the alarm.
Hush Control
The hush feature has the capability of temporarily desensitizing the alarm circuit for
approximately (6) six minutes. This feature is to be used only when a known alarm condition,
such as smoke from cooking, activates the alarm. The smoke alarm is desensitized by
pushing the Test/Hush button on the smoke alarm cover. If the smoke is not too dense, the
alarm will silence immediately and the red LED blinks every (1) one second. This indicates
that the alarm is in a temporarily desensitized condition. The smoke alarm will automatically
reset after approximately 10 minutes and sound the alarm if particles of combustion are
still present. The hush feature can be used repeatedly until the air has been cleared of
the condition causing the alarm. Pushing the Test/Hush button on the alarm will end the
temporarily desensitized period. If the smoke is not too dense, after ten to fifteen minutes
the alarm will return to normal operation.
✓NOTE: Dense smoke will override the hush feature and sound a continuous
alarm.
CAUTION: Before using the alarm hush feature, identify the source of the smoke and be
certain safe conditions exist.
Battery Replacement
Low battery: This alarm is equipped with a low battery monitor circuit which will cause the
alarm to produce a single “chirp” approximately every 45 seconds and blink the amber LED
every 15 seconds, for a minimum of (7) seven days should the battery become low.
WARNING Use only the type of batteries specified: Two GP CR123A or Duracell DL123A
Before replacing the batteries, put the panel into the appropriate mode so the central
station is not notified in order to prevent unwanted alarms.
If you require further information, please contact
Nortek Security & Control at:
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
1950 Camino Vida Roble, Suite 150
Carlsbad, CA 92008-6517 USA
www.nortekcontrol.com
What To Do When the Alarm Sounds
SMOKE ALARM ACTIVATION
Smoke alarm pattern is (3) three long beeps repeating after 1.5 seconds, then (3)three long
beeps repeating every (4) four seconds.
The smoke alarm takes precedence when both smoke and carbon monoxide are present.
•Alert small children in the home as well as anyone else that might have difficulty
recognizing the importance of the alarm sounding or that might have difficulty leaving
the area without help.
•Leave immediately by your escape plan. Every second counts, so don’t waste time
getting dressed or picking up valuables.
•In leaving, don’t open any inside door without first feeling its surface. If hot, or if you
see smoke seeping through cracks, don’t open that door! Instead, use your alternate
exit. If the inside of the door is cool, place your shoulder against it, open it slightly and
be ready to slam it shut if heat and smoke rush in.
•Stay close to the floor if the air is smoky. Breathe shallowly through a cloth, wet if
possible.
• Once outside, go to your selected meeting place and make sure everyone is there.
•Call the fire department from your neighbor’s home - not from yours! Don’t return to
your home until the fire officials say that it is safe to do so.
•There are situations where a smoke alarm may not be effective to protect against fire
as stated in the NFPA Standard 72. For instance:
PRINTER’S INSTRUCTIONS:
INSTR,INSTL, C-SMKTCO1-B - P/N 10015389 X14 - INK: BLACK - MATERIAL: 16 LB. MEAD BOND - SIZE: 16.000" X 18.000"- TOL. +/- 0.125"- SCALE:1:1 - FOLDING: FOLD 4 X TO FINAL SIZE 4.000"X 4.500"- FINISH WITH LOGO SHOWING - SIDE 2 OF 2
Product Features and Specifications:
Temperature: Operating Range: 40°F (4°C) to 100°F (38°C)
Humidity: Operating range: 10-85% non-condensing
Audible Alarm: 85+ dB at 10’ @ 3.4±0.5 KHz pulsing alarm
Smoke Sensor: Photoelectric
CO Sensor: Electrochemical
Heat Sensor: 135° F (57°C) Supplimentary Heat Sensor
Fire Prevention
Never smoke in bed, or leave cooking food unattended. Teach children never to play with
matches or lighters! Train everyone in the home to recognize the alarm pattern and to leave
the home using their escape plan when it’s heard. Know how to do “Stop, Drop and Roll” if
clothes catch on fire, and how to crawl low under smoke. Install and maintain fire extinguishers
on every level of the home and in the kitchen, basement and garage.
NFPA (National Fire Prevention Association)
For your information, the National Fire Protection Association’s Standard 72, reads as follows:
Required Detection. Where required by applicable laws, codes, or standards for a specific
type of occupancy, approved single-and-multiple-station smoke alarms shall be installed as
follows: In all sleeping rooms and guest rooms, outside of each separate dwelling unit sleeping
area, within 21 ft (6.4 m) of any door to a sleeping room, the distance measured along a path
of travel, on every level of a dwelling unit, including basements, on every level of a residential
board and care occupancy (small facility), including basements and excluding crawl spaces
and unfinished attics, in the living area(s) of a residential board and care occupancy.
Smoke Detection—Are more smoke alarms Desireable?
The required number of smoke alarms might not provide reliable early warning protection for
those areas separated by a door from the areas protected by the required smoke alarms. For
this reason, it is recommended that the householder consider the use of additional smoke
alarms for those areas for increased protection. The additional areas include the basement,
bedrooms, dining room, furnace room, utility room, and hallways not protected by the required
smoke alarms. The installation of smoke alarms in attics (finished or unfinished), garages, or
within (6’ ) six feet of a heating or cooking appliance is not normally recommended, as these
locations occasionally experience conditions that can result in improper operation.
California State Fire Marshall
Early warning fire detection is best achieved by the installation of fire detection equipment in
all rooms and areas of the household as follows: A smoke alarm installed in each separate
sleeping area (in the vicinity, but outside the bedrooms), heat or smoke detectors in the living
rooms, dining rooms, bedrooms, kitchens, hallways, attics, furnace rooms, closets, utility and
storage rooms, basements and attached garages.
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
• Consult the dealer or an experienced radio/TV technician to help.
WARNING: Changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate the equipment.
To satisfy FCC/IC RF exposure safety requirements, a separation distance of 20 cm or
more should be maintained between this device and person's body.
Product Warranty
Nortek Security & Control LLC (“NS&C”) warrants its products to be free from defects in
material and workmanship for the warranty period. This limited warranty extends only to
commercial and governmental customers who buy direct from NS&C or through NS&C’s
authorized distribution channels. NOTE THAT ALL NS&C PRODUCTS ARE DESIGNED TO
BE INSTALLED AND SERVICED BY TRAINED PROFESSIONALS.
There are no obligations or liabilities on the part of NS&C for consequential damages arising
out of or in connection with use or performance of the product or other indirect damages with
respect to loss of property, revenue, or profit, or cost of removal, installation or reinstallation.
Please reference our website for full warranty procedures http://www.nortekcontrol.com/
support/customer-service/warranty-returns/.
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
www.nortekcontrol.com
16
15 17
10 11
13 14
18 19
12
Copyright © 2018 Nortek Security & Control LLC 10015389 X14