Nortel Networks Mediant Tp 1610 Sip Users Manual LTRT 72504 2000 & User's Ver 4.4

2015-01-26

• 1. Overview
  • Available Configurations
  • SIP Overview
  • Mediant 2000 Features
    • General Features
    • Hardware Features
    • PSTN-to-SIP Interworking
      • Supported Interworking Features
    • Supported SIP Features
• 2. Mediant 2000 Physical Description
  • General
  • The Mediant 2000 Chassis
    • Power Supply
  • The TP-1610 Board
    • Board Hot-Swap Support
      • Removing Boards
      • Inserting Boards
    • TP-1610 Front Panel LED Indicators
  • Rear Transition Module
  • Optional CPU Board
• 3. Installing the Mediant 2000
  • Unpacking
  • Package Contents
  • Mounting the Mediant 2000
    • Mounting the Mediant 2000 on a Desktop
    • Installing the Mediant 2000 in a 19-inch Rack
  • Cabling the Mediant 2000
    • Connecting the E1/T1 Trunk Interfaces
    • Installing the Ethernet Connection
    • Connecting the Power Supply
      • Connecting the AC Power Supply
      • Connecting the DC Power Supply
• 4. Getting Started
  • Assigning the Mediant 2000 IP Address
    • Assigning an IP Address Using HTTP
    • Assigning an IP Address Using BootP
  • Restoring Networking Parameters to their Initial State
  • Configuring the Mediant 2000 Basic Parameters
• 5. Web Management
  • Configuration Concepts
  • Overview of the Embedded Web Server
  • Computer Requirements
  • Password Control
    • Embedded Web Server Username & Password
  • Configuring the Web Interface via the ini File
    • Limiting the Embedded Web Server to Read-Only Mode
    • Disabling the Embedded Web Server
  • Accessing the Embedded Web Server
    • Using Internet Explorer to Access the Embedded Web Server
  • Getting Acquainted with the Web Interface
    • Main Menu Bar
    • Saving Changes
    • Entering Phone Numbers in Various Tables
  • Protocol Management
    • Protocol Definition Parameters
      • Coders
    • Advanced Parameters
    • Number Manipulation Tables
      • Dialing Plan Notation
      • Numbering Plans and Type of Number
    • Configuring the Routing Tables
      • Tel to IP Routing Table
      • IP to Trunk Group Routing Table
      • Internal DNS Table
      • Reasons for Alternative Routing
    • Configuring the Profile Definitions
      • Coder Group Settings
      • Tel Profile Settings
      • IP Profile Settings
    • Configuring the Trunk Group Table
    • Configuring the Trunk Group Settings
  • Advanced Configuration
    • Configuring the Network Settings
      • Configuring the SNMP Managers Table
      • Multiple Routers Support
      • Simple Network Time Protocol Support
    • Configuring the Channel Settings
    • Configuring the Trunk Settings
    • Configuring the TDM Bus Settings
    • Restoring and Backing up the Gateway Configuration
    • Regional Settings
    • Changing the Mediant 2000 Username and Password
  • Status & Diagnostic
    • Gateway Statistics
      • IP Connectivity
      • Call Counters
    • Monitoring the Mediant 2000 Trunks & Channels
    • Activating the Internal Syslog Viewer
    • System Information
  • Software Update Menu
    • Software Upgrade Wizard
    • Auxiliary Files
    • Updating the Software Upgrade Key
  • Save Configuration
  • Resetting the Mediant 2000
• 6. ini File Configuration of the Mediant 2000
  • Secured ini File
  • Modifying an ini File
  • The ini File Content
  • The ini File Structure
    • The ini File Structure Rules
  • The ini File Example
  • Basic, Logging, Web and RADIUS Parameters
  • SNMP Parameters
  • SIP Configuration Parameters
  • ISDN and CAS Interworking-Related Parameters
  • Number Manipulation and Routing Parameters
  • E1/T1 Configuration Parameters
  • Channel Parameters
    • Dynamic Jitter Buffer Operation
  • Configuration Files Parameters
• 7. Configuration Files
  • Configuring the Call Progress Tones
    • Format of the Call Progress Tones Section in the ini File
  • Prerecorded Tones (PRT) File
    • PRT File Format
  • Voice Prompts File
  • CAS Protocol Configuration Files
• 8. Gateway Capabilities Description
  • Proxy or Registrar Registration Example
  • Redirect Number and Calling Name (Display)
  • ISDN Overlap Dialing
  • Using ISDN NFAS
    • NFAS Interface ID
    • Working with DMS-100 Switches
  • Configuring the DTMF Transport Types
  • Configuring the Gateway’s Alternative Routing (based on Conn
    • Alternative Routing Mechanism
    • Determining the Availability of Destination IP Addresses
    • PSTN Fallback as a Special Case of Alternative Routing
    • Relevant Parameters
  • Working with Supplementary Services
    • Call Hold and Retrieve Features
    • Call Transfer
  • TDM Tunneling
    • Implementation
  • Call Detail Report
  • Trunk to Trunk Routing Example
  • SIP Call Flow Example
  • SIP Authentication Example
  • Nortel IMS Specific Features and Configuration
    • SIP2PRI Gateway
      • SIP to PRI Calls
      • PRI to SIP Calls
      • Support for RPI Header
        • Configuration of NPI/TON
      • Transfer
      • Other Nortel Specific Parameters
    • SIP2CAS (Call Pilot) Gateway
      • Supported Features
    • DTMF Configuration
• 9. Diagnostics
  • Mediant 2000 Self-Testing
  • Syslog Support
    • Syslog Servers
    • Operation
      • Sending the Syslog Messages
      • Setting the Syslog Server
      • The ini File Example for Syslog
• 10. BootP/DHCP Support
  • Startup Process
  • DHCP Support
  • BootP Support
    • Upgrading the Mediant 2000
    • Vendor Specific Information Field
• 11. SNMP-Based Management
  • About SNMP
    • SNMP Message Standard
    • SNMP MIB Objects
    • SNMP Extensibility Feature
  • Carrier Grade Alarm System
    • Active Alarm Table
    • Alarm History
  • Cold Start Trap
  • Third-Party Performance Monitoring Measurements
  • TrunkPack-VoP Series Supported MIBs
  • SNMP Interface Details
    • SNMP Community Names
      • Configuration of Community Strings via the ini File
      • Configuration of Community Strings via SNMP
    • Trusted Managers
      • Configuration of Trusted Managers via ini File
      • Configuration of Trusted Managers via SNMP
    • SNMP Ports
    • Multiple SNMP Trap Destinations
      • Configuration via the ini File
      • Configuration via SNMP
  • SNMP Manager Backward Compatibility
  • AudioCodes’ Element Management System
• 12. Selected Technical Specifications
• A. Mediant 2000 SIP Software Kit
• B. The BootP/TFTP Configuration Utility
  • When to Use the BootP/TFTP
  • An Overview of BootP
  • Key Features
  • Specifications
  • Installation
  • Loading the cmp File, Booting the Device
  • BootP/TFTP Application User Interface
  • Function Buttons on the Main Screen
  • Log Window
  • Setting the Preferences
    • BootP Preferences
    • TFTP Preferences
  • Configuring the BootP Clients
    • Adding Clients
    • Deleting Clients
    • Editing Client Parameters
    • Testing the Client
    • Setting Client Parameters
    • Using Command Line Switches
  • Managing Client Templates
• C. RTP/RTCP Payload Types and Port Allocation
  • Payload Types Defined in RFC 1890
  • Defined Payload Types
  • Default RTP/RTCP/T.38 Port Allocation
• D. Fax and Modem Transport Modes
  • Fax/Modem Settings
    • Configuring Fax Relay Mode
    • Configuring Fax/Modem ByPass Mode
    • Supporting V.34 Faxes
• E. Mediant 2000 Clock Settings
• F. Customizing the Mediant 2000 Web Interface
  • Replacing the Main Corporate Logo
    • Replacing the Main Corporate Logo with an Image File
    • Replacing the Main Corporate Logo with a Text String
  • Replacing the Background Image File
  • Customizing the Product Name
  • Modifying ini File Parameters via the Web AdminPage
• G. Accessory Programs and Tools
  • TrunkPack Downloadable Conversion Utility
    • Converting a CPT ini File to a Binary dat File
    • Creating a Loadable Voice Prompts File
    • Encoding / Decoding an ini File
    • Creating a Loadable Prerecorded Tones File
  • PSTN Trace Utility
    • Operation
• H. Software Upgrade Key
  • About the Software Upgrade Key
  • Backing up the Current Software Upgrade Key
  • Loading the Software Upgrade Key
    • Loading the Software Upgrade Key Using the Embedded Web Serv
    • Loading the Software Upgrade Key Using BootP/TFTP
  • Verifying that the Key was Successfully Loaded
  • Troubleshooting an Unsuccessful Loading of a Key
  • Abort Procedure
• I. Release Reason Mapping
• J. SS7 Tunneling
  • MTP2 Tunneling Technology
  • SS7 Characteristics
  • SS7 Parameters
  • SS7 Table Parameters
    • SIGTRAN Interface Groups
    • SIGTRAN Interface IDs
    • SS7 Signaling Link
  • SS7 MTP2 Tunneling ini File Example
  • ini File Parameters in a Table Format
    • Table Indices
    • Table Permissions
    • Tables of Parameter Value Rules in the ini File Structure
      • Tables Structure Rules
      • Dynamic Tables versus Static Tables
      • Tables in the Loaded ini File
• K. RADIUS Billing and VXML Calling Card Application
  • Benefits
  • Features
  • Supported Architecture
  • Implementation
    • Basic Calling Card IVR Scenario
    • Call Flow Description
  • Operation & Configuration
  • Configuration Parameters
  • Supported RADIUS Attributes
  • RADIUS Server Messages
    • Authentication
    • Authorization
    • Accounting
  • Voice XML Interpreter
    • Features
  • Supported Elements & Attributes
  • Provided Calling Card System
    • Voice Prompts
    • VXML Flow Chart
  • VXML Script Example
• L. SNMP Traps
  • Alarm Traps
    • Component: System#0
    • Component: AlarmManager#0
    • Component: EthernetLink#0
    • Other Traps
    • Trap Varbinds
• M. Regulatory Information