Nortel Networks Telephone T7316 Users Manual User Card
PDF Norstar T7316 User Card - Version 1 T E X T F I L E S
T 7316 User Card - Version 1 T 7316 User Card - Version 1 Free Phone System Manuals Voice Communications 800 593-6000
T 7316 User Card - Version 1 T 7316 User Card - Version 1
T7316 to the manual abff996c-08d3-4f80-b083-580e4f6f92fb
2015-01-26
: Nortel-Networks Nortel-Networks-Telephone-T7316-Users-Manual-346677 nortel-networks-telephone-t7316-users-manual-346677 nortel-networks pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
A Return to Menu Wall mount with a telephone stand Cord connections B K 1 K C T7316 Telephone User Card Desk mount option Route line cord through the stand. 1 Press here to remove the stand. I D J L E Headset option Connect cord to headset. L 2 M Connect cord to handset. F G key hole slots Use the key hole slots on the stand to mark the location for the screws. Tighten screws for a secure fit. Mount the stand as shown and insert screw. Use the screw that came with your telephone. H Connect cords to the telephone, refer to “Cord connections” illustrations. 2 3 1-800-4 NORTEL www.nortelnetworks.com © 2000 Nortel Networks P0935248 01 Printed in Canada Your T7316 telephone A Telephone light Adjustable display Shows the time and date, call and feature information. C Display buttons The label for display buttons appear in capital letters on the bottom of the display. Display buttons change with each feature you use. Contrast level 2 DOWN UP OK Feature message Display button label Display button D E ® Release button Ends an active call. Dial pad Connect line cord to wall jack. Your T7316 telephone F Flashes when a call rings at the telephone. Lights up when Message Waiting Indication (MWI) is supported by system software. Contact your System Administrator or Coordinator for more information. B N √ Volume control Adjusts the handset, Handsfree, headset and ringer volume. G © Mute button Turns the microphone off or on when you are on a call. H ¬ Headset button Turns the headset mode on. I ≤ Feature button Starts or ends a feature. J ≥ Hold button Places calls on hold. K Memory buttons L Memory and line buttons M Ω Indicators Appear next to active line and memory buttons. N Number card Write your extension number on this card. Wall mount without a telephone stand 1 Press here to remove the stand. Connect cords to the telephone, refer to “Cord connections” illustrations. 2 Mount the telephone onto the screws and slide it down. Connect line cord to wall jack. Telephone setup Display contrast level Adjust the contrast of your display. 1. Press ≤•‡. 2. Press UP or DOWN to view the levels. 3. Press OK to select a level. Language choice ≤•fi‚⁄ Select Primary Language for the telephone display. ≤•fi‚¤ Select Alternate Language for the telephone display. ≤•fi‚‹ Select Alternate Language 2 for the telephone display. ≤•fi‚› Select Alternate Language 3 for the telephone display. Connect line cord to wall jack. Place the telephone onto the wall mount plate and slide it down. Ring type Select a different ring for your telephone. 1. Press ≤•fl. 2. Press ⁄, ¤, ‹, ›, or NEXT to hear the different ring types. 3. Press OK to store the ring type. Button inquiry Memory buttons More on programming memory buttons More on making and answering calls Check what is programmed on your buttons. 1. Press ≤•‚. 2. Press the button(s) that you want to check. 3. Read the display. Button assignment examples are shown below. Line Intercom XXX (LINENAME) XXXX (SETNAME) SHOW OK NEXT VIEW Memory buttons are buttons not assigned as line, intercom or Handsfree buttons. Features How to hold calls 4. Memory buttons store internal and external numbers or features to give you one touch dialing or feature activation. 1. 2. 3. 4. 5. Press ≤• ‹. Press a memory button. Press ≤ and enter the feature code. Press OK to store the feature code. Label your new button. B 1. Press ≤•⁄. 2. Press a memory button. 3. Press OK to erase the button. Feature (FEATURENAME) SHOW OK Handsfree Handsfree C Making and answering calls Press ≤ when finished. Making calls A Memory buttons without indicators for autodial numbers and features. B Memory buttons- without indicators for external autodial numbers and features. These memory buttons show Ω indicators for internal autodial numbers only. Spare button label strips are provided with your telephone. How to label your buttons 1. Remove the plastic lens and button label strips from the telephone. 2. Write the name of each button on the button label strip. 3. Insert the button label strip back on the telephone. 4. Insert plastic lens, matching the tabs on the lens with the notches on the telephone. Align tabs Programming memory buttons External autodial Press ≤•⁄. Press a memory button. Dial the external number. Press OK to store the number. Label your new button. 1. 2. 3. 4. 5. Press ≤•¤. Press a memory button. Dial the extension number. Press OK to store the number. Label your new button. Your System Administrator or Coordinator must program the Handsfree feature on your telephone. • Press the Handsfree button on your telephone to make or answer a call. • To switch to Handsfree when you are on a call, press the Handsfree button and replace the handset. Lift the handset to switch back. When programmed, the Handsfree feature is assigned to button 16 on your telephone. 1. Lift the handset. 2. Press a line button. 3. Dial the external telephone number. 1. Lift the handset. 2. Press an intercom button and enter a line pool access code. 3. When you hear an external dial tone, dial the external telephone number. You can program a memory button with a new number or feature. Handsfree calls External calls using line buttons External calls using intercom buttons Internal autodial Use the Desktop Assistant application to customize button label strips for your telephone. Go to www.nortelnetworks.com/sbs_desktopassistant and download the Desktop Assistant application to your personal computer. There are many ways to make a call, depending on your telephone programming and the type of call. C Memory, line or intercom buttons with Ω indicators. 1. 2. 3. 4. 5. Tip • While on a call, press ≥. The Ω indicator for the line on hold will flash. To retrieve a held call, press the line button with the flashing Ω indicator. Calls are put on hold automatically when you switch from one line to another. How to erase memory buttons External autodial (XXXXXXXXXX) Use the three button label strips on the telephone to show what is programmed on the buttons. • A Internal autodial Autodial (XXXX) Button labels • Contact your System Administrator or Coordinator for a list of line pool codes. Internal calls using intercom buttons 1. Lift the handset. 2. Press an intercom button. 3. Dial the extension number. Contact your System Administrator or Coordinator for a list of extension numbers. Handsfree button How to mute calls • • • • Lift the handset. OR Press the button with the flashing Ω indicator before you lift the handset. While on a call, press © to turn the microphone off. The © light flashes when the microphone is off. Press © again to turn the microphone on. Use © on handset, Handsfree or headset calls. Headset calls • • Answering calls When your telephone rings and the display light flashes or when an intercom or line button Ω indicator flashes: 16 • Press ¬ to activate the headset mode. When the ¬ light is on, press a line or intercom button to make a call. Press ¬ to answer a call when the telephone rings or when an intercom or line button Ω indicator flashes. To switch to your headset when you are on a call, press ¬ and replace the handset. Lift the handset to switch back. Warning Nortel Networks does not support the connection of a headset to the T7316 telephone, unless Handsfree is enabled within the system programming. If Handsfree is not enabled, certain call handling features may not work as intended.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Create Date : 1910:00:91 51:14:25 Producer : Acrobat Distiller 3.02 Author : Creator : Adobe Illustrator(TM) 5.0 Title : T7316 Telephone User Card Modify Date : 2001:04:01 17:41:33 Page Count : 2 Has XFA : NoEXIF Metadata provided by EXIF.tools