North tech Group NT-SPL3X Speaker User Manual

North tech Group corp Speaker

User manual

Bluetooth Pairing Basic Operation
Frequently Asked Questions
Power On
Bluetooth Mode
AUX IN Mode
Wait for Pairing
Bluetooth Connected
Charging Status
LED DenitionStatus Description
The default mode is Bluetooth pairing mode, with
Blue light ashing. If plug 3.5mm AUX IN cable, it
will enter AUX IN mode, the green light is on.
Play/Pause: Blue light is normally on.
When it is over the bluetooth connection range, the
blue light ashes(back to pairing status). When the
speaker is in pairing mode for over 10 minutes, it
will power o automatically.
Red light is on when charging; Red light will be o
once fully charged
Green light is normally on
Blue light ashes
Blue light is normally on
AUX IN Connection
LED Operation Product Specications
My Device
Bluetooth
SoundCup-X
S/N
NFC
Product Name NT-SPL3X
Bluetooth Version
Bluetooth range
Bluetooth 4.2
10m
Driver Unit 4Ω 5W
Battery Capacity 2200mAh
Audio Input 3.5mm AUX IN / Bluetooth
Working time 7+Hrs(70% volume)
Charging time 4.5Hrs/ 0.7A charging current
≥75dB
Handsfree function Support
Support
Dimension 71*73.6*169.6mmmm
Bluetooth Mode
AUX IN Mode
1.Short press when playing music for Play/Pause
2.When a call is coming, short press to answer
3. When a call is coming, double press to refuse the call
4. During a call conversation, short press to hang o
1. Short press for volume down
2. Long press for previous track
1. Short press for volume up
2. Long press for next track
Short press for volume up
Short press for volume down
Indicator light keeps on
Device
On/O Button
User Manual
Step 1: Long press button 3 seconds to power on. Then the
speaker will enter into Bluetooth pairing mode with the blue
indicator blinking.
Step 2: Open the setting and nd SoundCup-X on the
Bluetooth name list in the phone
Step 3: Clicking “SoundCup-X” on the list, with two
"DongDong" sound and light keeping on, which means
connection succeeded and can start to play music.
Q:What kind of charger should we use for the speaker?
A:All common USB chargers can be used, while we suggest the ones
above 5V/1A.
Q: What is the working sequence of the speaker?
A: The priority is AUX IN input, phone call in Bluetooth mode and then
playing music Bluetooth mode.
Q: The speaker cannot be started up in a normal
situation.
A: Please plug in the charger and try in a few minutes.
Q:What if there is noise or discontinuous sound when
playing?
A:The speaker can be normally used within 10m under no obstruction
environment. If it is over 10m or with obstruction, there might be noise
or discontinuous sound.
Q:Why will the speaker shut down automatically when
it is working ?
A:When there is no bluetooth pairing or AUX IN within 10 minutes, the
speaker will shut down automatically to reduce power consumption.
Q: The speaker cannot connect the once-paired
cellphone.
A: First, remove the SoundCup-X from the cellphone’s Bluetooth list and
then short press the Bluetooth Disconnection Button to restart paring
mode.
*This speaker supports mobile phones and tablet PCs etc. Here this User Manual is
illustrated based on mobile phones.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: 1) this device may not cause harmful interference, and 2)
this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Statement

Navigation menu