North tech Group NT-SPL5 Speaker User Manual Shelly S

North tech Group corp Speaker Shelly S

User Manual

How to easily close the rubber cover of the charging port?Insert the head of the rubber cover rstPress the middile part of the rubber cover, done!User ManualBluetooth PairingBasic Operation LED Operation Product Specications Frequently Asked Questions"OZRVFTUJPOTQMFBTFTFOEBOFNBJMUPTVQQPSU!USFOEXPPDPNGPSJORVJSZPSXFCTJUFWJTJUwww.trendwoo.comMADE IN CHINAPower OnBluetooth ModeAUX IN ModeWait for PairingBluetooth ConnectedCharging StatusLED DenitionStatus DescriptionThe default mode is Bluetooth mode, and blue light ashes and stays in searching status. If put 3.5mm AUX IN cable, it will enter AUX IN mode, the green light is on.Play/Pause Blue light is normally on.When it is over the bluetooth connection range, the blue light ashes(back to pairing status). When the speaker is in pairing mode for over 10 minutes, it will power o automatically.Red light is on when charging. Green light is on when it is fully chargedGreen light is normally onBlue light ashesBlue light is normally onMՅୢ)ؾتSSAUX Connection Rubber CoverBluetooth Disconnection Light ModeMy DeviceBluetooth4IFMMZ4Bluetooth Disconnection ButtonLight Mode ButtonOn/O Button1.Short press when playing music for Play/Pause2.When a call is coming, short press to answer3. When a call is coming, double press to refuse the call4. During a call conversation, short press to hang o1. Short press for volume up2. Long press for next track1. Short press for volume down2. Long press for previous trackBluetooth ModeAUX IN ModeShort press for muteShort press for volume upShort press for volume downIndicator light keeps onDeviceStep 1Long press 3 seconds to power on.The speaker enters the bluetooth searching status and the blue indicator starts blinking.Step 2 Choose the DeviceFind the Shelly-S from the Bluetooth name list in the phoneStep 3 Bluetooth ConnectedIn the phone, it shows Shelly-S is connected, and the blueindicator light on, which means connection succeededand can start to play music.Press it to disconnect bluetooth, and Shelly-S gets back to Bluetooth pairing mode.Click to press the button, the green light mode will be switched in circulation by normally on/ slow ash/ quick ash/ light o.S/N Product Name Shelly-SBluetooth VersionBluetooth rangeBluetooth 4.110mDriver Unit 4Ω 5WBattery Capacity 800mAhAudio Input 3.5mm AUX IN / BluetoothWorking time 4-5Hrs(70% volume)Charging time 喡3Hrs/ 0.5A charging currentHandsfree function Support≥75dBS/NDimensionWeight96*96*43mm158gQ:What kind of charger should we use for the speaker?A:All common USB chargers can be used, while we suggest the ones above 5V/1A.Q: What is the working sequence of the speaker?A: The priority is AUX IN input, phone call in Bluetooth mode and then playing music Bluetooth mode.Q: The speaker cannot be started up in a normal situation.A: Please plug in the charger and try in a few minutes.Q:What if there is noise or discontinuous sound when playing?A:The speaker can be normally used within 10m under no obstruction environment. If it is over 10m or with obstruction, there might be noise or discontinuous sound.Q:Why will the speaker shut down automatically when it is working ?A:When there is no bluetooth pairing or AUX IN within 10 minutes, the speaker will shut down automatically to reduce power consumption.Q: The speaker cannot connect the once-paired cellphone.A: First, remove the Shelly-S from the cellphone’s Bluetooth list and then short press the Bluetooth Disconnection Button to restart paring mode.*This speaker supports mobile phones and tablet PCs etc. Here this User Manual is illustrated based on mobile phones.NT-SPL5 Way S
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu