Northfield Telecommunications d b a Advanced Wireless Communications AWR2000V1 TWO-WAY RADIO User Manual AWR ID FCC
Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications TWO-WAY RADIO AWR ID FCC
User Manual
TWO-WAY RADIO
Model Name: AWR-ID
Brand Name: ADVANCED WIRELESS COMMUNICATIONS
FCC ID: Q9SAWR2000V1
SAFETY TRAINING INFORMATION
Your Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications radio generators RF
electromagnetic energy during transmit mode. This radio is designed for and classified as ͞KĐĐƵƉĂƚŝŽŶĂů Use KŶůLJ͕͟ meaning it
must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such
hazards. This radio is NOT intended for use by the ͞'ĞŶĞƌĂů WŽƉƵůĂƚŝŽŶ͟ in an uncontrolled environment. This radio has been
tested and complies with the FCC RF exposure limits for ͞KĐĐƵƉĂƚŝŽŶĂů Use KŶůLJ͘͟ Inaddition , your Northfield
Telecommunications, Inc. d/b/a Advanced Wireless Communications radio complies with the following Standards and
Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
᪽ FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure
to Radio Frequency Electromagnetic Fields.
᪽ American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
᪽ American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of
Potentially Hazardous Electromagnetic Fields± RF and Microwave.
᪽ The following accessories are authorized for use with this product. Use of accessories other than those (listed in the
instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure.
To ensure LJŽƵ͛ƌĞ LJŽƵƌ expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always
adhere to the following guidelines:
᪽ DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause
you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or antenna
specifically authorized by the manufacturer for use with this radio.
᪽ DO NOT WUDQVPLWVIRUPRUHWKDQRIWRWDOUDGLRXVHWLPH³GXW\F\FOH´7UDQVPLWWLQJPRUHWKDQRIWKH
time can cause FCC RF exposure compliance requLUHPHQWVWREHH[FHHGHG7KHUDGLRLVWUDQVPLWWLQJZKHQWKH³7;LQGLFDWRU´OLJKWVUHG
<RXFDQFDXVHWKHUDGLRWRWUDQVPLWE\SUHVVLQJWKH³377´VZLWFK
᪽ ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the belt-clip
which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance requirements are not
exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5 cm (2 inches) from your mouth,
and slightly off to one side.
The information listed above provides the user with the information needed to make him or her aware of RF exposure,
and what to do to asͲsure that this radio operates with the FCC RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, your Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications radio generates RF
energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in
areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic
radiation such as hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided
those persons are fully aware of the potential for exposure and can exercise control over their exposure.