Northfield Telecommunications d b a Advanced Wireless Communications AWR391V2 UHF TRANSCEIVER User Manual AW391 20080812
Northfield Telecommunications, Inc. d/b/a Advanced Wireless Communications UHF TRANSCEIVER AW391 20080812
Owners Manual
OMWNER’S ANUAL
20809 Kensington Blvd. Lakeville, MN 55044
1-800-475-5852 www.advancedwireless.com
AWR391 UHF 460-470 MHz Two - W R
AY ADIO
UHF 460-470 MHzAWR391(The Mini):
420855102498
6-Ganged Charger
Model Number: 420855208640
1.3 cm between the back of the radio and the user’s body. AWC-approved accessories, antennas,
Using non AWC approved accessories may result in exposure levels which exceed the FCC’s
for use with this radio. Use of non-FCC approved headsets, batteries and accessories may
CONTENTS
Introduction ...........................................................................
Getting Acquainted .................................................................
Product inspection .................................................................
LCD display symbols .............................................................
6-gang charger view .............................................................
1
Safety and Care Instructions ..................................................
Safety precautions .................................................................
Caring for this product ............................................................
Caution .................................................................................
Getting Started .......................................................................
Installing / removing / charging the battery ...............................
Turn the unit ON/OFF .............................................................
Volume .................................................................................
Reset ...................................................................................
Talk to another transceiver .....................................................
Keypad lock ..........................................................................
Select a channel ....................................................................
Troubleshooting ....................................................................
Optional Accessories .............................................................
1
1
2
Transceiver radio view ...........................................................
Thank You! .............................................................................
FCC Declaration .....................................................................
I
II-IV
Contents ................................................................................ V
VOX level / voice delay time ...................................................
Dual watch (DW) ...................................................................
Scan for a Channel / CTCSS / DCS .........................................
Reset .....................................................................................
4
4
5
5
5
5
6
6
7
7
7
7
8
8
8
9
9
9
10
10
INTRODUCTION
Advanced Wireless Communications is a leader in the design and integration of wireless
communications solutions. Since 1992, we’ve been creating on site wireless systems that
help businesses communicate effectively.
1
Whether it’s a national chain of retail stores, a 50-story office tower, construction site, a
large distribution center, a college campus or a retirement home, Advanced Wireless
has the expertise and experience to create the best solution possible...
We’re ready to partner with you to make your communications more effective and efficient.
Ken & Ben Coons
Founders of Advanced Wireless Communications
GETTING ACQUAINTED
PRODUCT INSPECTION
Thank you for your purchase of Advanced Wireless Communications Portable two-way
radio model: Mini 391 420855102498. Before use, please inspect the product as follows.
First check the shipping carton for any signs of damage if any damage has occurred,
please contact your dealer immediately. Confirm the supplied product against the packing
slip to assure accuracy.
PACKAGING CONTENTS:
Part number Item Qty.
1. 420855102498 Mini 391
1pc
2. 420855209289 Li-on Battery pack for Mini 391
1pc
3. 420855209241 Holster for Mini 391
1pc
12 3
2
TRANSCEIVER RADIO VIEW
1
0
6
7
8
10
11
9
2
3
4
5
Front View:
0. Antenna
Receives and transmits signals
1. LED indicator
Lights up red when transmitting a signal
2. Channel Up
Press and hold for more than 1.5 seconds to activate the auto scan or dual watch
(selected by PC program) for available channel. While radio is on, press button
to increase channel no.
Generates audible sound
4. Speaker
3. Channel Down
Press and hold for more than 1.5 seconds to activate the key lock.While radio
is on, press button to decrease channel no.
5. Connection pins
Slot pins into a desktop charger docking pins station (docking station not included)
6. Microphone
Picks up voice sounds
3
7. Headset jack
Allows use of headset for hands-free communication.
8. Push to talk
Press and hold button, speak into the microphone using your normal
speaking voice.
PTT
Press and hold more than 1.5 seconds to rapidly increase the volume. While radio
is on, press button to increase the volume by a single unit.
10. Volume Down
Press and hold for more than 1.5 seconds to rapidly decrease the volume. While radio
is on, press button to decrease the volume by a single unit.
11. Power
Press and hold for more than 1.5 seconds to turn the unit on or off.
Back View:
1. Battery door
Remove to access battery compartment
2. Battery compartment
Uses lithium 3.7V-830mAhrechargeable battery
3. buttonMon
Activate MONITOR function
9. Volume Up
4
LCD DISPLAY SYMBOLS
6-GANG CHARGER VIEW
Channel number: Select between 22 channels
Dual Watch: Scan 2 channels
Battery indicator: Provides battery status during operation
Keypad lock: Locks keypad to prevent accidental button
activation
Auto-scan: Unit is scanning Channels or CTCSS
VOX: Voice activation system
SYMBOL FUNCTION
1. Docking cradle
2. DC adaptor socket: Charge radio units; provide power for cloning operation
3. LED status indicator for extra batteries
1
2
3
4
5
6
5
Please observe the following safety precautions when setting up and using this product.
*LCD panel – The LCD panel is made of glass, and may break if the unit is dropped or
impacted.
*Heat sources – Keep the product away from heat sources such as radiators, stoves,
heaters, and other heat-generating products.
*Water and moisture – Do not use the product in or near water or in high moisture areas
such as a bathroom. Indoor use only.
To ensure you receive the maximum beneft from using this product, please observe the
following guidelines.
*Cleaning – Use a damp cloth. Do not use liquid cleaning agents, benzene, thinner, or
aerosols.
*Repair – Do not attempt to repair the product or modify the circuitry by yourself. Only
replacement parts that are recommended by Advanced Wireless Communications
at 1-800-475-5852 are to be used.
*Do not scratch hard objects against the LCD display as this may cause damage.
SAFETY AND CARE INSTRUCTIONS
SAFETY PRECAUTIONS
CARING FOR THIS PRODUCT
CAUTION
*To avoid risk of fire or injury, do not attempt to charge non-rechargeable batteries.
Please turn off the unit while charging.
*Replace only batteries with the same or equivalent type recommended by the
manufacturer.
*Please dispose of old, defective batteries in an environmentally friendly manner in
accordance with the relevant legislation.
*See additional battery warnings in the “WARNING” section of the user manual.
*Do not dispose this product as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
*No open flames, such as lighted candles, should be placed near the apparatus.
*To reduce the risk of electric shock, do not expose this application to rain or moisture.
4. USB socket: download settings from PC to radio units
5. switch: Charge radio units; clone radio unit settings
6. : Clone radio unit settings from source radio to other radio units
CHG-CLON
PROG
To insert the battery:
1. Slide the battery door open.
2. Insert the lithium battery into the battery compartment, making sure the polarities
(+ and –) match.
3. Slide the back cover and clip into place.
WARNING:There is a danger in which incorrectly placing the battery can cause an
explosion. Always make sure the radio is switched off before installing or changing
the battery. Replace only with the same or equipment type. Use ONLY with lithium 3.7V
830mAH rechargeable battery. Contact Advanced Wireless Communications at
1-800-475-5852 or www.adavncedwireless.com for more information.
6
GETTING STARTED
INSTALLING / REMOVING / CHARGING THE BATTERY
To charge the battery using 6 gang charger:
IMPORTANT:Charge the battery for 12 hours on the first charge. After that, it should
take 4 or less hours to charge.
Make sure the adapter is not obstructed and is easily accessible to the unit.
1) Connect 6 gang charger to AC power using DC adaptor provided.
2) Slide switch to select CHG.CHG-CLON
3) Insert radio unit into 1 docking cradle (insert additional radio units into docking
cradles, 2 through 6). Please ensure radio screen faces forward (same direction
as LED lights on gang charger).
st
Battery Status Extra Batteries LED Radio screen
Battery charging
Battery charged
Red
Green
LCD backlight on
LCD backlight off
Press and hold until you hear a beep and the LCD display appears or disappears.
TURNTHEUNITON/OFF
To turn the unit ON or OFF:
To change the volume level:
Use or to increase or decrease volume.
VOLUME
NOTE:
To completely disconnect from power, the adapter should be disconnected from the
6-Ganged Charger.
Batteries should not be exposed to excessive heat such as sunshine or fire.
To maintain the battery life of your two-way transceiver it is recommended that you only
charge the battery when needed. Overcharging the battery will reduce performance.
The 6-Ganged Charger and adapter should not be exposed to wet conditions. No
with liquid, such as vases, should be placed on the main unit and adapter.objects filled
For best results ensure that the unit is turned off before charging.
Remove batteries before storing your radio for extended periods. Batteries corrode
over time and may cause permanent damage to your radio.
For best transmission speak about 2 away from the radio and leave a short pause
before speaking once you have pressed
To talk to another transceiver:
The transceiver will automatically play received transmissions.
NOTE:You can only communicate with another transceiver that is on the same channel
and using the same CTCSS/DCS code as your transceiver.
1. Press and hold “ ” to check if the channel is free.Mon
TALK TO ANOTHER TRANSCEIVER
2. Press and hold and speak into the microphone to transmit.
3. Release once you have finished speaking to allow other radios to respond.
7
8
To avoid accidentally changing the channel and the unit’s preferred settings, you can
lo c k th e key pad .
Press and hold for 1.5 seconds. appears when the keypad is locked.
NOTE: While the keypad is on you can still use the and .
KEYPAD LOCK
To lock or unlock the keypad:
The transmitter and receiver must be on the same channel using the same CTCSS code
or DCS code in order for you to communicate with another party.
1.
2.
To select between maximum 8 channels (the CTCSS code or DCS code is set by
PC program):
SELECT A CHANNEL
Press to increase channel no. To activate auto scan for available channels,
press and hold for more than 1.5 seconds.
Press to decrease channel no. To activate key lock, press and hold for
more than 1.5 seconds.
tran s missi o n auto m atical l y when the t ransc e iv er is u sed w i th an o ptiona l
han ds-f ree mic roph one / hea d set . I f t h e u nit i s s e t t o V OX leve l 1, 2 o r 3 ,
it wi l l auto m a tically d et ect and transmi t your v oi ce through to the selected
ch a nne l .Th e VOX lev e l an d tran smi s sio n de lay t ime s hou ld be adju ste d
according to your voice loudness and personal preference.
To set up a headset:
VOX LEVEL / VOICE DELAY TIME
The Voice Activated Transmission (VOX) function allows your voice to activate
2. Plug in the headset.
1. Press and hold to switch the radio off.
NOTE: This product is only compatible with AWC headsets, please ask your local
retailer for further information.Not all AWC headsets are VOX compatible.
3. Press and hold to switch the radio back on again.
9
SCAN / DW FOR A CHANNEL / CTCSS / DCS
NOTE:will be disabled when Scan function is activated.
or
NOTE:If you activate a scan while your code is set to 0, the radio will check for any
activity on each channel, regardless of the code used on that channel. If you activate a
scan while the CTCSS or DCS code is set, the radio will only check for activity on the
specified channel and code combinations set on your radio.
To auto-scan / DW for a channel / CTCSS / DCS:
3. Press and release to enter scan mode.
4. Press to enter the Tx mode on the last valid channel in memory and
continue to scan after the button is released.
5. Long press to terminate the All Scan mode. The radio will then return to the
last valid channel.
1. DW or Scan function is selected by PC program.
2. Channel for DW is chosen by PC program.
See below for some common problems and their remedies. DO NOT attempt any repairs
yourself. This will invalidate your warranty.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES / REMEDIES
Can’t turn the radio on Check the battery is correctly installed
●and has been
fully charged
Can’t communicate with
other radios
VOX function is not working ●Check the headset is correctly plugged in and is
compatible with the Mini 391 radio
●For this and all other issues contact Advanced Wireless
Communications at 1-800-475-5852 or
www.advancedwireless.com for more information
10
OPTIONAL ACCESSORIES
Part number Item
420855208640 6 gang charger
420855209265 Plug in Charger for Mini 391
420855207698 Flexible Earloop for Mini 391
Picture Model No.
AWGC-391
AWC-391
AWFEL-391
420855209395 AWSVM-391 Surveillance Headset for Mini 391
420855203041 AWEB-Mini Earbud Headset for Mini 391
420855205120 AWMFEL-391 Modular Earloop for Mini 391
420855204857 AWMEB-391 Modular Earbud for Mini 391
420855204871 AWMSV-391 Modular Surveillance for Mini 391
420855209593 AWMPA-391 Modular PTT Headset Cord
420855209555 AWL-391 Lanyard for Mini 391
These products are available form: Advanced Wireless Communications at 1-
800-475-5852 or www.advancedwireless.com
11
420855209586 AWAB-391 Armband for Mini 391
420855207087 AWEM391 Ear Mold Left Large
420855204420 AWEM391 Ear Mold Left Medium
420855207094 AWEM391 Ear Mold Right Large
420855204413 AWEM391 Ear Mold Right Medium
420855207070 AWEM391 Ear Mold Right Small
AWM-391
420855209289 AWB-391 Battery for Mini 391 Radio
420855209241 AWSH-391 Holster Swivel
420855209722 Magnetic Mount For Holding Radio