Norton 7100REM Remote Programming Guide 80 9371 0001 000
User Manual: Norton 7100REM Remote Programming Guide Installation
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
SafeZone® Remote Programming Guide DOOR CONTROL MODE: SafeZone - holds door open as long as movement is detected in the opening. Infinite Hold Open - door held open constantly (with or without movement being detected). Detection Off - standard door closer operation; open and close/no hold open. Hold Time Door Control Mode (F2) Unlock Lock 1 = Safe Zone 2 = Infinite Hold Open 3 = Detection Off The amount of time door will be held open after movement is not detected in the opening. Values range from 0 to 9. Default: 1 0 = 0.5 sec. 9 = 20 sec NOTE: Every adjustment, when using the infrared remote control, must start with the unlocking function, and end with the locking function. To UNLOCK the sensor: Press the UNLOCK key once. To LOCK the sensor: Press the LOCK key twice. Example: Set Safe Zone to hold open 9 seconds after movement is not detected in the opening. Step 1 - Press unlock ; LED flashes Step 2 - Press time ; LED flashes quickly Step 3 - Press 9 ; LED flashes Step 4 - Press lock ; LED flashes quickly Step 5 - Press lock again to save setting; LED does not flash Default: 5 = 10 sec Immunity Immunity helps to reduce the chance of unwanted detections due to environmental disturbances. 1 = Reduced 2 = Normal 3 = Increased 4 through 9: enhanced immunity (for highly reflective environment) Default: 2 Detection Mode Sensitivity 0 = Minimum Sensitivity 9 = Maximum Sensitivity Default: 8 Detection mode offers 3 different levels of detection: 1 = Bi-Directional 2 = Uni-Directional 3 = Uni-Directional with motion tracking feature Default: 1 Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 80-9371-0001-000 (01-14) SafeZone is equipped with a Motion Tracking Feature (MTF). The MTF is available when SafeZone is used in the uni-directional mode. SafeZone is factory preset with the MTF ON. MTF is recommended for use in short vestibule areas to help reduce unwanted door hold-open time. Refer to the Programming Guide to alter this setting. It is recommended that the MTF be enabled for all applications. The detection capabilities perform as follows: BI-DIRECTIONAL MODE: • Detection of all motion towards or away from the sensor. UNI-DIRECTIONAL MODE: • The detector will work in a uni-directional mode at all times regardless of traffic patterns - detecting only motion moving toward the sensor. OR UNI-DIRECTIONAL MODE WITH MTF: The principle is as follows: • The detector does NOT activate its relay as long as it detects movement exclusively moving away from the detector. It acts like the classic unidirectional detector. • As soon as SafeZone detects movement toward the sensor, it automatically switches to bi-directional mode. • SafeZone maintains the bi-directional function for approximately 2 seconds following the last detection of motion toward the door. • At the end of the 2-second time frame, if SafeZone does not detect any further motion, it switches back to the unidirectional mode. ASSA ABLOY 3000 Highway 74 East • Monroe, NC 28112 Tel: (877)- 974-2255 • Fax: (800)-338-0965 www.nor tondoorcontrols.com Copyright © 2010, 2014 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved. Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited. 80-9371-0001-000 (01-14)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2014:01:22 14:20:12-05:00 Modify Date : 2014:01:22 14:20:12-05:00 Producer : Corel PDF Engine Version 16.1.0.843 Author : Kim Creator : CorelDRAW X6 Title : Untitled-1EXIF Metadata provided by EXIF.tools