User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 165007 |
| Application ID | n9w8TsMEl+2L18FtI4WfmA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 37.58kB (469730 bits) |
| Date Submitted | 2001-08-16 00:00:00 |
| Date Available | 2001-08-16 00:00:00 |
| Creation Date | 2001-07-09 18:38:24 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-07-09 18:40:26 |
| Document Title | User Manual |
Remote Transmitter Operations Pressing and releasmg the Pressing and releasmg the “disarm! “arm/lock" button arms unlock" button disanns the system the security system and unlocks the doors unless and locks the doors. the system is activated. The Pressing and holding unlock operation may be this button for three configured so that pressing seconds will first arm, this button M disarms the and then activate the system and unlocks only the Panic feature, locking dnver’s door. and pressing a the doors second time unlocks all of the doors. Pressing and holding this button for three seconds will first disarm. and then activate the Panic feature, unlocking the doors. Pressing the “channel 2" button for two seconds can be used to activate an output for an optional function such as trunk release Pressing and releasing this button twice arms or disamts the system without the continuation chirps. Pressing the “panic" button for three seconds will activate the Panic feature. but without locking or unlocking the doors. Transmitter part number: 3143-03 The Red LED Status Light: Informs you ofthe differentconditions the security system can be in and also serves as a visual deterrent to break-ins and thefir The Valet Switch: In “every day" operation. the Valet Switch is used to place the system into "Valet Mode". Valet Mode can be used to turn off automatic functions. such as Last Door Arming or Automatic Rearming, and also prevents arming the system via remote transmitter. The Valet Switch is also used. with the ignition key, to disarm the security system in the event the transmitter becomes inoperable, and this switch is also used in the procedure for programming features and programming transmitters. Arming The System Using The Transmitter ArmingThe Security System Using TheTransmitter: The security system can always be armed from the transmitter. provided the ignition key is “off" and the system is not in the Valet Mode. To arm the system, after you exit the vehicle and close all ofthe doors. simply press and release the “arm/lock“ button once. The parking and interior lights will flash once. the siren will chirp once and the LED Status Light will begin to flash. confirming that the system is armed. ln addition, the doors will lock and the starter interrupt will engage to prevent any attempt to start the vehicle. Your security system is now fully armed, and is ready to respond if an intrusion attempt is detected. Please note that the Excalibur‘s separate “arm/lock" and “disarm/unlock" button design allows repetitive operation- ifalready armed, pressing the “arm/lock" button will simply rearm the system, and vice versa when pressing the “disarm/unlock" button. CAUTION : Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment a.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2001:07:09 18:38:24 Producer : Acrobat Distiller 4.0 for Windows Modify Date : 2001:07:09 18:40:26+08:00 Page Count : 2EXIF Metadata provided by EXIF.tools