User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 165043 |
| Application ID | Yw4DSk0jaZVHbo9bMu5bIw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 155.81kB (1947637 bits) |
| Date Submitted | 2001-08-17 00:00:00 |
| Date Available | 2001-08-17 00:00:00 |
| Creation Date | 2001-08-16 10:01:28 |
| Producing Software | Acrobat Distiller 4.0 for Windows |
| Document Lastmod | 2001-08-16 10:01:50 |
| Document Title | User Manual |
Model : AP8998T3
The ' lncludedwiththesystemhavebeenpre-programmedatthe
tactay.Mtheodtbuttonpre-asslgnedtoconuolaspedflchmcfionotthe
system. Although the system In the vehlcle has either a 3. 4, or 5 channel
RECENER. depending on the model. the transmitwrs included with the
system are 7 channel transmitters. Thls allows you to program each
hammnmmanortevemuehtwocerlamllesjndalsoatlowsyou
to change which button or buttons control certaln functions of the system.
(Example: Trtnernitter channel 5, shown below. can be programmed to
acdvateReoelverdtamelz.)ReferbMed\anbela~foraccesstoead|olthe
transmttm channels. and for the standard factory button assignments.
Remote Arm a. Disarm
‘RemoteEmergency Panic
'Remote Door Lock & Unlock
PushAndHoldFor3SecondsFor0m1
Release.Push2Times ForAux. Out.
" Pulsed Output for Accessories
" Switched Output for Accessories
ES\.
. ® \
'RemoteEmergencyPanlcisavallableontyoncertain models.
'DoorLodrAJnlod(mayrequkeeddtttonalcomponentsincertahvehides.
“Someddtemorecawnonsccessoflestortheseaddlflonatdtannelsare;
“0015 RemoteCarStarter
M0256 RemoteTmMReleaseRetay
A891.“ Remote GarageDoorlnterlace
As 9153 Remote Wlndow Roll Up
PROGRAMMING TRANSMI'ITERS:
It is Important to remember that during mammlng. each individual step of
the procedure must be executed within 15 seconds of the previous step. When
the 15 second time limit is allowed to expire. the system will automatically exit
program mode. This is indicated by a long 'ohirp' from the siren.
Additionally. any time the ignition key is turned oft while programming, the
syswm will Immediately exit program mode. This is also indicated by a long
'chirp' from the siren.
TO PROGRAM ADDITIONAL TRANSMITTERS:
NotezTheprogramming information described beMassumesthatthedeiault
transnitterisbelngusedandmeLodrerockbuttonlsoneandthesame. lf
youhavemeophmalhansnitterudthasepamteLodtandUnlodtbutton.use
letter '8' reference belowlor programming.
Also.wtwreindicetedthatthesimnwillemitalongchirptoneJheoptlonalhom
maybeconnected.inwhichceseeitherorboth thehomand siren maysound.
1. (a) Enter the vehicle. and turn the imition key to the 'on' position.
(b) Enter the vehicle. and turn the ignition key to the 'on' position.
2. (a) Press and release the valet/bypass push button switch 3 times.
(b) Press and release the valet/bypass push button switch 3 times.
3. (a) The dash LED. will flash one time. and the siren will 'chirp" 1 time
indicating the system is ready to accept programming for channel 1.
Arm/Disarm. Lock/Unlock and Panic.
(b) The dash LED. will flash one time. and the siren will 'chirp' 1 time
indicating the sysbm is ready to accept programming for channel 1.
Ann/Lock and Panic.
4. (a) You can assign the Lock/Unlock. Arm/Disann button. by pressing and
holding the lock/unlock button until the siren emits a long chirp tone.
The chirp tone conflmis that programming of channel 1 was successful.
Up to 4 transmitters can be programmed. press and hold the selected button
ofeadtaddifimalbansniherunfilhedirptoneisheard.orpressandrelease
the valet push-button switch two times to advance to step 88.
(b) YounnassigntheLock/Armbuttonbypresslngandholdingtheiock
button until the siren emits a long chirp tone.
The chirp tone confirms that programming of channel 1 was successful.
Up to4 transmitters can be programmed. press and hold the selected button
of each additional transmitter until the chirp tone is heard. or move to step 15
5.
6.
P.“
10.
11.
12.
Press and release the valet/override switch one time to advance to
channel 2.
(a) Disregard this step.
(b) The dash mounted LED. will flash 2 times, and the siren will “chirp“
2 times Indicating that the system is ready to accept programming for
channel 2. Unlock/2nd Unlock, Disarm. and Panic. Pressand hold the
Unlockbuttononyourkeychain bansmitteruntilthesirenemitsalong
dihpbneJhisconfimtsthatproaamrlngofdtamdzwassuccesshn.
Upto4transmitterscenbeprogramned.pressandhcldthesetected
button of each additional transmitter until the chirp tone is heard. or
Preaandmleasethevaietloverndeswltdtonethtebadvmcebdameia
The dash mounted LED. will flash 3 times. and the siren will 'chirp‘ 3
times. indicating that the system is ready to accept programming for
channel 3. Trunk Release Output. (where so equipped), or alternate
dtannei output when used.
(a) Press and hold the 1st Opt. button on your keychain transmitter until
the siren emits a long chirp tone. This confimts that prcg'ammlng of
dtannel 3 was successful. Up to 4 transmitters can be programmed.
pressandholdtheselected buttonofeachadditionaltransmitteruntil
the chirp tone is heard.
(b) Press and hold the Opt button on your keychain transmitter until the
siren emits a long chirp tone. This confirms that programming of
channel 3 was successful. Up to 4 transmitters can be programmed,
pressandholdtheselectedbuttonofeachadditional transmitterunttl
the chirp tone is heard.
Pressand release lhevalet/overrideswitrhmelimebadvmbdtameu
itsoequipped. lfycrtsyshrndoesndhaveafll’tdflnetalmgdipblwred
byashortchirp tonewillndlcetethattheprogrammodehasbeenexited.
The dash mounted LED will flash 4 tlrnes, and siren will 'chlrp' 4 times
indicating that the system is ready to accept programing of channel 4.
(a) Press and hold the remaining Opt. button of the transmitter until the
siren emits a long chirp tone. This confirms that pregamming of
channel4was successful. Upto4 transmitters can be progarnrned.
pressand holdtheselected buttonofeach additional transmitter until
the chirp tone is heard.
(b) Pressand hold any combination oftwobuttons simultaneously, until
“ammuabtmdmpmfihlsconfirmmatpfognmof
leassuccoeefuLUpwunnwmanbeptmmmd.
mwmmmmmmmmnmwunm
“Matchmaormmmmepushbutwnswmmo
exitlfnpmoramflnomodemrwmmelgnmonsmwmflmexnme
Wham.
mmmamwbyammmmwmatmm
modeha beeneuihd.
NOTEmpmomeeKmEmmmdanmwnglbeNo
mmfion.
QUICK REFERENCE:
Ywmmnwmmmmmwamumu.
WMNMMMMJMAIMHM4CMM)
—-li=.'-
—m
———
mmmmnw,mumfimmbmo«mfim
befitmummode.
CAUTION: changes or modifications not expressly approved
by the manufacturer responsible for compliance could void
the tenth authority to open“ the equlpment
BATTERY REPLACEMENT:
The transmitter incorporates a small red LED. built into the case. This L.E.D.
can be used to indicate battery condition. You will notice a decrease in
transmitter range as the battery condition deteriorates. To replace the
battery...
1. Remove the transmitter cover by removing the small screw from the back
of the transmitter case.
2. Remove the disdtarged battery. making note of the orientation of the + and
- contacts. and dispose of property.
3. Install the new (type GP23A) battery, taking care to orient the + and -
contacts properly.
4. Replace the transmitter cover. taking care not to damage the LED. or
switdies on the circuit board.
{a
(LHA57490)
ORDER FORM FOR APSQQBTS TRANSMITTER
IMPORTANT: To help us expedite your order, please print all of the
information legibly. and mail this form and your payment according to the
instructions below. Please lndiwte which button pad is used with your
transmitter as indicated above.
1.Narne :
Address:
City: State: ZipOode:
2. TelephoneNumber:( )
3. Enterthetotal numberoftransniuersrequiredhere:
4. The cost per transmitter is 3 65.00.
5. Enterthetolalarnountendoeedhere:
( New York state residents must Include the epproprlete sales in. )
6. Method of payment; d’ledt one of the boxes below.
DMaslercerd DVisa DCheckormoneyorder'wonotsendmsh) ‘
' Make checks payable to Audlovox Corporation
7. CreditCard Nunber:
8. Credit Card Expiration Date :
n Credit card purchasers can order additional or replacement
a transmittersbyphone. Simplydial 1 400-645-4994. and
follow: the instruwons from the operator interface.
9. Mail this form, and your check, to;
Audiovox Corporetlon 150 Marcus Blvd. Heuppeuge. N.Y. 11788
Attn.: TRANSMITTER DEPARTMENT
Form NO. |28-5749
I FCC ID zELVATlC
This device complies with FCC Rules Part
15 Operation is subject to the following
two conditions (I) This device may not
cause harmful interference and (2) this
device must accept any interference that
may be received, including interference
that may cause undesired operation.
NOTE:The manufacturer is not responsible
‘for any radio or TV interference caused
by unauthorized modifications to this
equipment. Such modifications could void
the user’s authority to operate the
e ui ment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2001:08:16 10:01:50-07:00 Create Date : 2001:08:16 10:01:28-07:00 Producer : Acrobat Distiller 4.0 for Windows Page Count : 7EXIF Metadata provided by EXIF.tools