Nutek ATDA 434 MHz RF Programmer User Manual Manu

Download:
Mirror Download [FCC.gov]
Document ID	549180
Application ID	4vgrkQ0Xhs/LSgHgDP2noA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.42kB (155264 bits)
Date Submitted	2005-06-07 00:00:00
Date Available	2005-06-07 00:00:00
Creation Date	0000-01-01 00:00:00
Producing Software	Acrobat PDFWriter 3.0 for Windows
Document Lastmod	2005-06-02 11:32:37
Document Title	Manu
Document Creator	S:engineeringInstruction Manu
Document Author:	Code-Alarm

RF Programmer
Feature Setup
The RF programmer allows you to select the feature set that you have installed. Please refer to the chart
below to determine which functions are required for the particular feature set you are installing.
Security
Remote Start
1 Way/2 Way
CA 125
ON
OFF
1 WAY
CA 135
ON
OFF
2 WAY
CA 145
ON
OFF
2 WAY
CA 535
OFF
ON
1 WAY
CA 545
ON
ON
2 WAY
CA 645
ON
ON
2 WAY
Selecting Programmable Features
1) Press the POWER button to turn the system ON.
2) Once powered up the MENU screen will be displayed.
3) Use the UP & DN arrows to scroll through the programmable features. Once you locate the desired
feature to change, press the > arrow to advance to the next screen. You should see the default setting
of the system
4) Press the SET button to scroll through the available settings. Once the desired setting is shown on
the screen, press the < to return to the feature chart selectable options or press SEND to transmit to
the system you are installing.
NOTE 1: You must access the RF receive bank on Option programming to SEND the selected information to the CA 425, please refer to the programming section on the next page.
Using the M1 function
The RF Programmer has a memory function that will allow you to store the most common of settings.
Once you have selected the settings that you want to store press and hold M1 button for 3 seconds.
The screen will display "Reading to Memory".
You can access the stored settings anytime by pressing the M1 button.
For technical assisance please call 800-421-3209
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions.
(1)This device may not cause harmful interference, and
(2)This device must accept any inte rference received, including interference that may cause
undesired operation.
Per FCC 15.21, you are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 0000:01:01 00:00:00Z
Subject                         : 
Modify Date                     : 2005:06:02 11:32:37+08:00
Page Count                      : 2
Creation Date                   : 0-01-01T00:00:00Z
Author                          : Code-Alarm
Producer                        : Acrobat PDFWriter 3.0 for Windows
Keywords                        : 
Mod Date                        : 2005:06:02 11:32:37+08:00
Metadata Date                   : 2005:06:02 11:32:37+08:00
Title                           : Manu
Creator                         : Code-Alarm
Description                     : 

EXIF Metadata provided by EXIF.tools