Nutek ATFF ALARM DEVICE User Manual ATFC usermaunal

Nutek Corporation ALARM DEVICE ATFC usermaunal

Users Manual

USER MANUAL NUTEK CORPORATION Model:ATFC FCC ID:ELVATFF Remote Control Transmitters TRANSMITTER PROGRAMMING： If the need arises for programming of additional or replacement transmitters, simply follow the 4 steps outlined below: 1. Turn the ignition to the ON position 2. Press and release the programming button 3 times 3. Press and hold, for 3 seconds, the button of the transmitter you wish to add until the parking light flashes indicating the transmitter has been learned NOTE: Do not allow more than 5 seconds the lapse between steps or the program mode will be automatically exited and you will have to start over. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user`s authority to operate the equipment. FCC Caution :To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu