Nutek ATIA Hand Held Automotive Remote Start Controller User Manual AVX1B4S

Nutek Corporation Hand Held Automotive Remote Start Controller AVX1B4S

User Manual

128-86061 of 2Transmitter Programming GuideThis transmitter is designed for use with your upgrade remote startunit and is programmed by using the remote start's program switch incombination with the transmitter button. Although this transmitter canbe programmed into any of the Audiovox remote start and or alarm,remote start systems, it will offer limited use and should be used forthe remote start upgrade only.To program this transmitter into your remote start upgrade unit:1) Turn the ignition to the on position2) Press and release the programming switch 3 times3) Press and hold, for 3 seconds, the button of the transmitter youwish to add until the parking light flashes indicating the transmitterhas been learned.4) Repeat step 3 for each transmitter up to a total of 4.Turn the ignition off to exit the program mode.NOTE: Do not allow more than 15 seconds to lapse between stepsor the program mode will be automatically exited and you will have tostart over.This device complies with FCC Rules Part 15 Operation issubject to the following two conditions(1) This device may not cause harmful interference and(2) This device must accept any interference that may bereceived, including interference that may cause undesiredoperation.NOTE:The manufacturer is not responsible for any radio orTV interference caused by unauthorized modifications tothis equipment. Such modifications could void the user’sauthority to operate the equipmentModel S1BTXA
128-86062 of 2Attention: Transmitter Ordering DepartmentImportant: To help us expedite your order, please print all of theinformation legibly and mail this form and your payment accordingto the instructions below.1)Name:_____________________________________2) Address:_________________________________________3) City:________________State:________Zip Code:__________4 Telephone Number:( )_____________________5) Total Number Of Transmitters Required:_______Cost Per Transmitter is: $65.00Multiply By Number Of Transmitters X6) Enter Total Amount Enclosed _______(New York State Residents must include the appropriate sales tax)7) Method of Payment: Mastercard Visa Check or Money Order (do not send cash)Make Checks Payable To Audiovox CorporationCredit Card Number:___________________________________Credit Card Expiration Date: ____/___/____8) Mail this form along with your payment to:Transmitter Ordering DepartmentAudiovox Corporation 150 Marcus Blvd., Hauppauge N.Y.11788Credit card purchasers can order additional or replacementtransmitters by phone. Simply dial 1 - 800 - 645 - 4994, andfollow the instructions from the operator interfaceORDER FORM FOR TRANSMITTER S1BTXA© 2009 Audiovox Electronics Corp., Hauppauge, N.Y. 11788 128-86062

Navigation menu