Nutek ATIE Automotive Security User Manual AVX1B4S

Nutek Corporation Automotive Security AVX1B4S

Users Manual

128-87071 of 2Transmitter Programming GuideThis transmitter is designed for use with your upgraderemote start unit and is programmed by using the remotestart's program switch in combination with the transmitterbutton. Although this transmitter can be programmed intoany of the Audiovox remote start and or alarm, remote startsystems, it will offer limited use and should be used for theremote start upgrade only.To program this transmitter into your remote start upgradeunit:1) Turn the ignition to the on position2) Press and release the programming switch 3 times3) Press and hold, for 3 seconds, the button of the transmit-ter you wish to add until the parking light flashes indicatingthe transmitter has been learned.4) Repeat step 3 for each transmitter up to a total of 4.Turn the ignition off to exit the program mode.NOTE: Do not allow more than 15 seconds to lapse betweensteps or the program mode will be automatically exited andyou will have to start over.Model 091BPr
128-87072 of 2After removing the two #0 pointphillips screws shown, pry apartcase with the edge of a finger nailor a small common screwdriver.Keep hold of the metal key ringloop to prevent it's loss as it willseparate from the transmittercase.Carefully remove thedischarged battery by sliding itout from under the clip in thedirection indicated by the arrowin the diagram. Properly disposeof the exhausted battery andinsert a new CR2032 taking careto arrange it so that the + isfacing up toward the + symbol onthe battery clip. Reassemble inthe reverse of above.This device complies with FCC Rules Part 15 Operation issubject to the following two conditions(1) This device may not cause harmful interference and(2) This device must accept any interference that may bereceived, including interference that may cause undesiredoperation.NOTE: The manufacturer is not responsible for any radio orTV interference caused by unauthorized modifications tothis equipment. Such modifications could void the user’sauthority to operate the equipment
128-87073 of 2Attention: Transmitter Ordering DepartmentImportant: To help us expedite your order, please print allof the information legibly and mail this form and your pay-ment according to the instructions below.1)Name:_____________________________________2) Address:_________________________________________3) City:________________State:________Zip Code:__________4 Telephone Number: ( )_____________________5) Total Number Of Transmitters Required:_______Cost Per Transmitter is: $.00Multiply By Number Of Transmitters X6) Enter Total Amount Enclosed _______(New York State Residents must include the appropriate sales tax)7) Method of Payment: Mastercard Visa Check or Money Order (do not send cash)Make Checks Payable To Audiovox CorporationCredit Card Number:___________________________________Credit Card Expiration Date: ____/___/____8) Mail this form along with your payment to:Transmitter Ordering DepartmentCredit card purchasers can order additional or replacementtransmitters by phone. Simply dial 1 - 800 - 645 - 4994, andfollow the instructions from the operator interface.ORDER FORMFOR TRANSMITTER 091BPr

Navigation menu