Nutek MTIB Transmitter User Manual PLUS6900 UM qxp

Nutek Corporation Transmitter PLUS6900 UM qxp

Contents

rev1 User s Manual Part 1

User’sManualModel: Plus6900This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; and(2) This device must accept any interference received, including interference that may cause undesired operation.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to thisequipment. Such modifications could void the user’s authority to operate the equipment.For Technical Assistance, please call (800) 638-3600,or visit www.magnadyne.comRAutomotive SecurityPLUS6900-UM.qxp 4/3/2009 1:14 PM Page 1
Congratulations on your purchase of a quality Carbine automotive security and remote start system.Carbine security products have been designed to provide the consumer with a technologicallysuperior product and years of trouble free operation. The information enclosed will provide a readyreference of the operation and maintenance of your new Carbine security and remote start system. As with any product that performs automatic functions, there are certain safety precautions thatyou must practice and be aware of.• Keep the transmitter out of children’s reach.• Do not leave anyone in the vehicle while running on remote control.• Alert servicing personnel that the vehicle can be started automatically.• Do not start the vehicle by remote while it’s in an enclosed area.• Always apply the parking brake and lock the vehicle as you exit the vehicle.• The vehicle windows must be rolled up.• Should the unit malfunction, disconnect the fuse until the problem is corrected.• Some areas may have local ordinances that prohibit leaving a vehicle running on public streets.2Remote Control Transmitter Operation / Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6Alarm Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7System Arming / Disarming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9Valet Mode Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Panic Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11Anti-Car Jacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Additional Speciality Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Remote Start Operations / Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-16Second System Operation / LCD Transmitter Battery Replacement . . . . . . . . . . . . . . . . . . . . . . . . . . 17WarningsContentsPLUS6900-UM.qxp 4/3/2009 1:14 PM Page 2
32-Way LCD Remote LCD Display Icons 1-Way RemoteThe LCD screen on the 2-way remote control displays graphic icons. It provides visual informationon any trigger of the sensors and around the clock surveillance of your vehicle, as well asdisplaying the present status of the system.Door LockVehicles Doors are Locked Door UnlockVehicles Doors are UnlockedArmed ModeSecurity System is ArmedValet ModeSecurity System is DisarmedRemote TransmissionTransmitting a SignalIn-Range IndicatorYou are within Remote Control RangeDoor TriggeredDoors are Opened (Zone 3)Trunk/Hood TriggeredTrunk/Hood are OpenWarn AwayShock Sensor Triggered (Zone 1)Second VehicleCommunicate with a Second Vehicle’s Security SystemTimer Control StartAutomatic Engine Start (Timed)Power Save ModeSaves The Battery Power whenTransmitter is not in UseVibrate ModeVibrates when Security System is TriggeredLow BatteryReplace the Transmitter BatteryShock SensorShock Sensor TriggeredIgnitionEngine Starting by Remote ControlIgnitionTrigger On Ignition Switch (Zone 5)Engine RunningVehicle Engine is RunningDriver Paging / Lost and FoundSomeone is Paging you from the VehicleSystem Trigger/PanicAlerts that the System has beenTriggered Remote Control TransmittersLCD Remote IconsPLUS6900-UM.qxp 4/3/2009 1:14 PM Page 3
Two Steps Door Unlock andDisarm SystemPanic FunctionSilent Arming/DisarmingLock Doors & Arms SystemTransmitter ButtonSystem Function4RemarkCar Locator Armed for 30 seconds or longerArm and Delete the 2-StageShock Sensor Press Twice within 3 SecondsIgnition in “OFF” PositionActive Anti-Car Jacking Mode Ignition in “ON” Position,Press and Hold for 2 SecondsChannel #4 Timer Control OutputUnlock Doors & Disarm SystemPress Twice within 3 SecondsTrunk Release - Channel 3 Press and Hold for up to 3 SecondsPassive Arming Bypass While the Systemis in “Disarmed” ModeArm System and Hidden Alarm Function Press within 3 SecondsActivate or Turn Off the RemoteStart (Default Setting) Press Twice within 3 Seconds-+++----Press and Hold for 3 seconds.Activate Turbo Timer Mode-+(Hold)Then(Hold)Enter/ Exit Second Vehicle SystemControl using the LCD TransmitterSee Page 17 of this Manual forMore DetailsTransmitter OperationWhile Ignition is OnPress and Release++Activate Valet ModeDe-Activate Valet ModeSee Page 10 for More DetailsSee Page 10 for More DetailsPress and ReleasePress Both and ReleasePLUS6900-UM.qxp 4/3/2009 1:16 PM Page 4
Vibration/Melody ModeThis mode is useful when you are in a noisy place and it is difficult to hear the beep from thetransmitter. While in the Vibration/Melody Mode, the transmitter will vibrate if your securitysystem has been activated.1. Press and hold the and buttons at the same time until one long beep isheard. Programming has now been entered.2. Within 5 seconds, press the button to toggle between “ON” or “OFF”. Theicon will be displayed in the LCD display when the Melody Mode is On. 3. To exit the Programming Mode, take no action for five seconds. The remotecontrol will generate two long beeps to indicate Programming Mode has beenexited.Power Save ModeWhile in the Power Save Mode, the LCD remote transmitter will “Sleep” until abutton is pushed, extending the life of battery. When Power Save Mode is “OFF”,the remote control will wake up periodically to check for messages from thesecurity system.1. Press and hold the and buttons at the same time until one long beep isheard. Programming has now been entered.2. Within 5 seconds, press the button to toggle between “ON” or “OFF”. Theremote will beep once for “ON”, and twice for “OFF”. When Power Save Mode is “ON”, theicon on the LCD screen indicates entry into Power Save Mode.3. To exit Programming Mode, take no action for five seconds. The remote control will generatetwo long beeps indicating Programming Mode has been exited.Screen Lamp OnPress the button once, and the LCD screen lamp will turn on for 5 seconds.System Status CheckTo check the system’s present status through the LCD screen, press thetransmitter button first, then within 3 seconds press and buttons at thesame time. The response will be one melody sound, and the LCD screen will beilluminated. Note: If no response is received, then you are out of range.Clear the Flash Icon and Melody SoundPress the button first, then within 3 seconds press the and buttons at thesame time. These steps will clear the flash icon and melody sound on the LCDtransmitter.Stop the Trigger Melody SoundWhile triggering the alarm the LCD screen will alert the user through a melody sound and aflashing trigger icon. Press any button on the LCD transmitter to stop melody sound only, and theremote control will not send a command to the system.5LCD Remote ProgrammingPLUS6900-UM.qxp 4/3/2009 1:17 PM Page 5
LED FunctionOFF System is DisarmedSlow Flashing System is ArmedFast Flashing Automatic Arming Timer is Counting DownLED On Solid System in Valet Mode (Ignition Key On)1 Flash Every 5 Seconds System in Valet Mode (Ignition Key Off)2 Flashes - Pause Zone 2, Trigger from Trunk/Hood 3 Flashes - Pause Zone 3, Trigger from Door Switch 4 Flashes - Pause Zone 4, Trigger from Shock Sensor 5 Flashes - Pause Zone 5, Trigger from Ignition Switch Press Buttons at the Same Time: Then Press Button Within: System Function5 Sec.Switching to 2nd Vehicleor Returning to 1stVehicle Operation5 Sec. Melody / Vibration Mode5 Sec. Power Save ModeLCD Screen Lamp Turns On for Five Seconds3 Sec. System Status Check3 Sec. Clear the Flash Iconand Melody Sound6+++++The transmission range may decrease if the system encounters interference from tall structures orstronger radio frequencies such as high-voltage power lines.LCD Remote ProgrammingRF InterferenceLED IndicatorPLUS6900-UM.qxp 4/3/2009 1:18 PM Page 6

Navigation menu