Nxcontrol System NXBEE01 NxRemote Kit User Manual

Nxcontrol System Co., Ltd. NxRemote Kit Users Manual

Users Manual

©2015 NxControl System Co, Ltd. All right reserved.
All other trademarks are the property of theirrespecve owners.
The use of the word partner does not imply a partnership relaonship and any other company.
NxControl assures no responsibility for any errorsthat may appear in the manual.
Informaon contained here in is subject to changewithout noce.
2MUUDE0002 2015.12
Device Type
Wireless Type
IR Code Learning
Interface
Personal Scenario Seng
Operang System
Color
Sizes (LxWxH)
Weight
Remote Dongle
ZigBee (Low Electronmagnec Wave)
Yes
Micro USB
Yes
Android 4.0 above, USB OTG Supported
Black / White
49.8 x 22.0 x 7.0 mm
15g
Device Type
Wireless Type
Networking Range
IR Frequency
Power
Color
Sizes (RxH)
Weight
RF to IR Adapter
ZigBee (Low Electronmagnec Wave)
30 m above (In door)
36 KHz ~ 56 KHz
3V CR2032 Lithium Baery
Black / White
R13.0 x 7.3 mm
10g
Power Light IR Code Learning Light
IR Receiver
Micro USB
IR Transmier
Status Light
NxRemote NxBee
TM TM
1
1. Download APP
APP
Scan QR code or search “NxRemote” for downloading
APP on Google Play.
2
2. Plug in NxRemote
2. Plug in NxRemote.
3. When noce message shows up, make sure to check
“Use by default for this USB device” to allow the app to
access your USB device.
(Some devices need to enable USB OTG funcon. e.g.
Sony : Sengs -> Xperia Connecvity -> USB Connecvity
-> Detect USB device)
1. Check your Android phone / tablet supporng USB
OTG funcon.
List of Android Phones and Tablet supports OTG Funcon:
hp://www.nxcontrol.com/OTG.php
NxRemote Connected
A/C
Listen
Settings
Scenario
Profile
Watch
Others
3
3. Pair NxBee
Search NxBee
APP
APP
1.Remove NxBee back cover, and pull out the baery
tab. The green light will start blinking.
2. From APP Homepage to Seng :
Seng -> Device Setup -> click
search buon.
3. Select NxBee and enter pair number,
it will stop blink and show up on the
screen.
4. Click NxBee icon. While connects with
NxRemote correctly, the green light will
blink. If not, please replace baery and
try again.
4
4. Setup & Learn IR codes
1. Click seng to begin learning.
2. Choose type,brand, locaon of applicances and then
click learning boon.
3.Click corresponding key on your original remote to learn
IR code. If the countdown message disappears, the buon
learning process is completed.
4. Aer learning successful, back to Homepage and start to
control.
VOL CH
Original Remote
2 Inch IR
4
21 3
8
65
7
0
9
ON
Blink
Red
Learning.....
10 seconds
5
4.1 Learn A/C IR Code(OFF Buon)
1. Click “ OFF” buon to begin
learning process.
2. Point your original remote at the boom of NxRemote,
and click OFF key to learn the IR code.
＊A/C remote must be
turned “ON” before learning.
OFF
A/C
Remote
OFF
2 Inch IR
Blink
Red
0
25
C
Learning.....
10 seconds
6
5. Try Your NxRemote
1. Press “ Home ” or “ back ”
to home page, the device icons will light up.
2. Press Power key on your NxRemote APP to check
if the device works.
Green light will blink when you press the buon key.
VOL CH
A/C
Listen
Settings
Scenario
Profile
Watch
Others
8
4.2 Learn A/C IR Codes(ON Buon)
OFF
MODE
TEMPFAN SPEED
SWING
70
F
1. Adjust the status (Temp., Mode,
Fan Spd, Swing) on original remote
and NxRemote with the same status.
2. Click “ ON ” buon to begin learning process.
3. Point your original remote at the boom of NxRemote and
click the power key to learn the IR code.
＊A/C remote must be turned “OFF” before learning.
ON
2 Inch
IR
Blink
Red
Learning.....
10 seconds
A/C
Remote
7
6. Adhere NxBee
IR receiving area (Do NOT cover power light.)
IR transmission
direcon
1. Place NxBee close to IR receiving
area (near power light normally) and try to click power
to turn on/off.
2. While applicances turn on, the IR receiving area is correct.
Then , adhere NxBee near this area.
9
7. Control Home Appliances
NxRemote Kit should only be used in environments with
ambient temperatures between 0°C (32°F) and 35°C (95°F)
10
8. Scenario Setup
SOURCE
VOL CH
SOURCE
VOL CH
Save Scenario?
CANCELOK
1. Press record buon to start up.
2. Start your control process, and click record buon again
when you finish all acons.
3. Save your acon to move on next step.
11
4. Choose your scenario icon and select user if already
have one, check delay me for each buons,name your
mode and save it.
5. Back to APP Homepage , choose your favorite scenario
to begin.
CANCEL
SAVE
Reading Mode
John
Delay Time
John
Reading Mode
Movie Mode
ECO Mode
Relax Mode
Party Mode
Exercise Mode
14:00
16:00
12
Warranty Informaon Form
Mr./Mrs./Ms./Miss: ____________________________________________________________
Telephone Number: ____________________________________________________________
Address: ______________________________________________________________________
E-mail: ________________________________________________________________________
Dealer's Name: _________________________________________________________________
Dealer's Telephone Number: ________________________________________________
Dealer's Address: _________________________________________________________
Purchase Date : / / (DD/MM/YYYY)
Chapter dealership
(Chapter invalid uncapped shop)
(During the warranty period with this item warranty service warranty card, please keep this
warranty card, lost without replacement) 13
Important Safety Informaon
When using this product, the safety precauons below must be taken avoid possible legal liabilies and
damages.
Retain and follow all product safety and operaon instrucons.
Observe all warnings in the operaon instrucons on the product.
To reduce the risk of bodily injury, electric shock, fire and damage to the equipment. Observe the following
precauons.
Care
Do not open NxRemote. There are no user-serviceable parts inside. Do not allow moisture to enter the
unit. Moisture will corrode the inner electronics. Any changes or modificaons not expressly approved by
NxControl void the user’s authority to operate the device and could void the warranty. The product should
only be used in environments with ambient temperatures between 0 degree C (32 degree F) and 35 degree
C (95 degree F).
Handle Baery Carefully
NxBee contains a lithium non-rechargeable baery. Baery life is dependent upon usage. Heavy daily use
will result in shorter baery life. There is a risk of fire and burn if the baery is handle improperly. Do not
disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a
baery to temperatures higher than 60 degree C (140 degree F).
End-of-life Baery Disposal Instrucons
If baery is end-of-life, consult local laws and regulaons for proper baery disposal in your area. If there
are no local regulaons concerning baery disposal, please dispose of the dead baery in a waste bin for
electronic devices. KEEP ALL BATTERIES OUT OF THE REACH OF CHILDREN.
Disposal and Recycling Informaon
The symbol indicates that your product must be disposed of properly according to local laws and
regulaons. When your product reaches its end of life, contact your local authories to learn about
recycling opons.
European Union – Disposal Informaon
The symbol above means that according to local laws and regulaons your product and/or its baery shall
be disposed of separately from household waste. When this product reaches its end of like, take it to a
collecon point designated by local authories. The separate collecon and recycling of your product
and/or it baery at the me of disposal will help conserve natural resources and ensure that it is recycled
in a manner that protects human health and the environment.
Safety Precauon for Small Children
Do not leave your product within the reach of small children or allow them to play with it. They could hurt
themselves or others, or could accidentally damage the product. Your product contains small parts with sharp
edges that may cause an injury or which could become detached and create choking hazard. Consult the doctor
immediately if the accessories or baery are swallowed.
Do not disassemble it or aempt to recharge it outside the system. Do not crush, puncture, dispose of in fi re,
short the external contacts, or expose to water or other liquids. Dispose of the baery in accordance with local
regulaons and instrucons from your service provider.
14
Limited Warranty Statement
The Limited Warranty Statement is a voluntary manufacturer's warranty. It provides
rights separate to rights provided by consumer law, including but not limited to those
relang to non-conforming goods. As such, the Limited Warranty Statement benefits are
in addion to, and not instead of, rights provided by consumer law.
Your hardware product is warranted against defects in materials and workmanship for a
period of ONE (1) YEAR from the date of original retail purchase ("Warranty Period"). If a
defect arises during the Warranty Period, NxControl, at its opon and to the extent
permied by law will (1) repair the product at no charge using new parts or parts that are
equivalent to new in performance and reliability, or (2) exchange the product with a
funconally equivalent product that is new or equivalent to new in performance and
reliability. This warranty excludes damage resulng from abuse, accident, modificaons
or other causes that are not defects in materials and workmanship.
Other than the consumer law rights to which you are entled, all warranes, condions
and other terms not set out in this warranty document are excluded from the Limited
Warranty Statement. Some countries do not allow limitaons on how long such
warranes, condions and / or implied terms may last, so the limitaon described above
may not apply to you. NxControl does not warrant, represent or undertake that it will be
able to repair or replace any NxControl Product under this warranty without risk to and
/ or loss of informaon and / or data stored on the NxControl Product. In no event shall
NxControl be liable for (a) any losses that were not caused by our breach of this warranty
document; (b) any loss or damage that was not, at the me of your purchase of the
product, a reasonably foreseeable consequence of NxControl breaching this warranty
document; or (c) losses relang to any business of yours, loss of profits, loss of data or
loss of opportunity. The provisions of this warranty document shall not apply to (i) death
or personal injury, (ii) fraud or gross negligence; or (iii) fraudulent misrepresentaon; or
(iv) any other liability that cannot be limited or excluded as a maer of law.
Some countries do not allow limitaons on how long an implied warranty lasts, or allow
exclusion or limitaon of incidental or consequenal damages, so the above limitaons
or exclusions may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights, which vary from country to country. Proof of purchase may
be required to verify eligibility.
For more informaon and contact support, please refer to NxControl webpage at
hp://www.nxcontrol.com
16
Cerficaon and Compliance
U.S. FCC ID:2AGNZ-NXREMOTE01 / 2AGNZ-NXBEE01
Canada IC:20895-NXREMOTE01 / 20895-NXBEE01
EU
Australia
New Zealand
Taiwan
Japan
FCC Radiaon Exposure Statement (FCC ID: 2AGNZ-NXBEE01)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Canada Compliance Statement
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1)This device may not cause interference; and
(2)This device must accept any interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
IMPORTANT NOTE:
IC Radiation Exposure Statement(IC: 20895-NXBEE01):
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement
non contrôlé.
CAN ICES-3 (B)/NMB-3(B)
CCAF15LP2340T0T CCAF15LP2350T3
15
R123-456789
R123-456789

Navigation menu