OKAYO Electronics EJ-5T Wireless Bodypack Transmitter User Manual

OKAYO Electronics Co., Ltd. Wireless Bodypack Transmitter

User Manual

Download: OKAYO Electronics EJ-5T Wireless Bodypack Transmitter User Manual
Mirror Download [FCC.gov]OKAYO Electronics EJ-5T Wireless Bodypack Transmitter User Manual
Document ID1738825
Application ID9CvYlFuoE0J+ctmhMRoZug==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize48.86kB (610711 bits)
Date Submitted2012-07-08 00:00:00
Date Available2012-07-08 00:00:00
Creation Date2012-06-18 11:47:32
Producing SoftwareCorel PDF Engine Version 15.1.0.588
Document Lastmod2012-07-06 11:44:32
Document TitleEJ-5T-英文說明書(簡易)
Document CreatorCorelDRAW X5
Document Author: 林淑玉

UHF Pendant Wireless Transmitter (EJ-5T)
Illustration
10
11
Set up/ Installation
1. POWER / MUTE switch
2. Channel / Volume switch
3. LCD screen
4. Mesh head (hidden microphone)
5. External mic. Input
6. Charging indicator (built-in)
7. Aux input
8. Strap hole
9. DC charging input
10. Strap hole
11. Buckle clip
12. Charging terminal
12
Power on:
1. Press and hold for 0.5 second and the power is on.
LCD backlit lights up.
2. When power is on, it will display “ON”
available
channels channel display and battery capacity
Mute LED lights blue.
3. Power is on in two seconds and receiving audio.
Power off:
1. Press and hold for two seconds to turn the device
off.
2. OFF display on screen and all indicators turned off.
Channel select:
1. Press and hold SET button for two seconds; enter into
the channel select mode.
2. When the LCD screen and numbers flashes, press + or
- to select preferred channel.
3. Press SET button to confirm quit, or wait for ten seconds
without any keys pressed and confirm to quit.
Mute / Listen select:
1. Press Mute button for two seconds; enter into
the Mute / Talk switch mode.
2. Mute mode: LED lights red. Talk mode: LED
lights green.
Select output power/ Maximum available channels:
1. In OFF mode, press SET and POWER button to enter
into the selection mode.
2. LCD screen is display maximum available channels;
640-664 MHz will display F. Press or to select
preferred channel.
3. Press SET button to confirm quit or to wait for 5
seconds without any keys pressed and confirm to quit.
4. LCD screen is display Hi / Lo, press + or - to select
preferred output power.
5. Press SET button to confirm or to wait for 5 seconds
without any keys pressed.
Charging mode:
1. LED lights red when charging, LCD battery symbol is
cycle charging.
for two seconds shows the current used frequency. 2. LED lights green when fully charged, LCD battery symbol
is display steady.
2. To confirm quit without any keys pressed when
3.
When
use a travel kit, still might use normally.
exceeded for two seconds.
4. When device is slot into a charger stand, will off the power.
Volume switch:
5. When device leaves a charger stand, the power is off.
1. LCD screen will display current used volume size when 6. When using a travel kit, the duration of charging time
press or (Vol. 1 ~ 3).
upto seven hours, it's determined full.
2. Press or to select preferred volume level and hold
7. Battery error: LED status lights red and flashes when
for two seconds to confirm or to confirm quit without
charging (at 3 Hz), LCD battery symbol screen lights
any keys pressed.
flashes (at 3 Hz), shows error and it might be:
Frequency synchronization:
(1) The battery charge temperature is exceeded 60°C.
1. When the power is on, it will synchronize frequency
(2) The duration of charging time for charger stand is
or synchronize function will switch off without
exceeded seven hours.
receiving audio signal exceeded upto ten minutes.
(3) No battery in the device.
When synchronized, MUTE indicator (blue light) and
Others:
charging indicator (green light) flashes at least three
1. Press any buttons (except Mute button), LCD
times and backlit lights up.
backlit lights up. LCD backlit lights off for ten
2. To proceed synchronize, the charging indicator (green
seconds without any keys pressed.
light) will be blinking (at 1 Hz) at least ten times, when 2. To reset mode, press / at the same time and
use a charger HDC-520 or HDC-530. And, charging
switch the power on. The initial value is set
status will display.
Channel: 01 (96 CH) or 00 (F CH), Volume: 2,
3. The device can repeat synchronize by a charger.
Mute: Talk.
Channel display:
1. LCD display channel status, press short SET key
Consumer Alert
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions: The
system may not cause harmful interference; it must operate at a low power level (not in
excess of 50 milliwatts); and it has no protection from interference received from any other
device. Purchasers should also be aware that the FCC is currently evaluating use of wireless
microphone systems, and these rules are subject to change. For more information, call the FCC at
1–888–CALL–FCC (TTY: 1–888–TELL–FCC) or visit the FCC's wireless microphone Web site at
http://www.fcc.gov/cgb/wirelessmicrophones.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2012:06:18 11:47:32+08:00
Modify Date                     : 2012:07:06 11:44:32+08:00
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 2
Has XFA                         : No
Creation Date                   : 2012:06:18 11:47:32+08:00
Mod Date                        : 2012:07:06 11:44:32+08:00
Producer                        : Corel PDF Engine Version 15.1.0.588
Author                          : 林淑玉
Metadata Date                   : 2012:07:06 11:44:32+08:00
Creator                         : 林淑玉
Title                           : EJ-5T-英文說明書(簡易)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NTMEJ-5T

Navigation menu