OKAYO Electronics WT-600T Digital Tour Guide System Transmitter User Manual
OKAYO Electronics Co., Ltd. Digital Tour Guide System Transmitter
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2540152 |
| Application ID | +f1DHpa9M+odsHsYUpjCbg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 43.84kB (548004 bits) |
| Date Submitted | 2015-02-24 00:00:00 |
| Date Available | 2015-02-24 00:00:00 |
| Creation Date | 2014-12-15 11:36:01 |
| Producing Software | Corel PDF Engine Version 17.1.0.572 |
| Document Lastmod | 2014-12-15 11:38:07 |
| Document Title | 6920300205-WT-600-英文說明書-無商標無型號(簡易)-13.cdr |
| Document Creator | CorelDRAW X7 |
| Document Author: | éƒçŽ«å› |
Digital Tour Guide System Manual (WT-600T) (WT-600R) (WT-600T) (WT-600R) 11 12 10 1 Battery / Signal indicator 2 Antenna 6 Power 7 Hidden Mic. (Transmitter) 3 LCD screen 4 Aux In (Transmitter) Volume wheel (Receiver) 5 UP / DOWN button 8 Mic. In (Transmitter) Earphone jack (Receiver) 9 Mute button On / Off Press ( )powerkeytoturnonthedevice.Whendevice turnedon,LCDdisplaysbatterypower, channelnumber andMaster(A) / Slave(B)mode. Press and hold ( ) for 2 second and the power is off. OFF display on screen. Channel Select Press or button, enter into the select mode. Lock / Unlock Button Channel will be locked automatically without any buttons pressed. LCD displayed lock icon. In lock mode, the power can be off, but channel number cannot be changed. When locked, press and button up to 1 sec to unlock. Unlock icon will not be showing on LCD screen. LED/ Battery Status ※ Transmitter: LED lights blue when the battery is sufficient. LED lights red when the battery is insufficient. ※ Receiver: 10 Charging contacts 11 Strap hole 12 Transmitter: Master(A)/Slave(B) mode switch 13 Battery cover 13 Channel synchronizationfunction ‘ ‘means channel sync function on, ‘ functionoff . Press keytoconfirmsetting . ‘meanschannelsync Channel synchronizationmodeon ※ Transmitter: In A mode, press mute key 9 to send the sync signals, and 1 flashes in purple. In B mode, press mute key 9 to search for A signal, and once confirmed, press 9 again to connect. ※ Receiver: The receivers will receive sync signal for first 30 seconds after device turned on, once sync successfully, 1 flashes in purple for 3 second then turns blue. LCD now displays channel number synced. If the receiver failed to sync within 30 seconds, then it will resume to the previous channel set. When syncing the devices, the transmitters and the receivers need to be within 3 meter radius. Earphone requirement This model is designed for 3.5mm stereo earphone jack only, we recommend to use the device with earphone provided by the supplier. LED lights off when no signal is received but the battery is sufficient. LED lights red when signal is received but the battery is insufficient. This device complies with part 15 of the FCC Rules. Operationissubjecttothefollowingtwoconditions:(1) Thisdevicemaynotcauseharmfulinterference, and(2) thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesired operation. A(Master)/B(Slave) mode setting (transmitteronly) Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 12 Mode sets with switch , and reboot is required after. When set to Master, LCD displays A. When set to Slave, LCD displays B. Battery Saving (receiver only) The power turns off when no signal is received within 20 mins. Channel synchronizationfunction When the device is turned off, press and atthesame timetoturnonthedevice . Then press or tochooseentersyncmodeornot. ※ Specifications are subject to change without prior notice. IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. FCC INFORMATION The Federal Communication Commission Radio Frequency Interference Statement includes the following paragraph: The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communication. However, there is no grantee that interference will not occur in a particular installation. If this equipment dose cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 03/13 08/14
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 郭玫君 Create Date : 2014:12:15 11:36:01+08:00 Modify Date : 2014:12:15 11:38:07+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 郭玫君 Title : 6920300205-WT-600-英文說明書-無商標無型號(簡易)-13.cdr Creator Tool : CorelDRAW X7 Metadata Date : 2014:12:15 11:38:07+08:00 Producer : Corel PDF Engine Version 17.1.0.572 Document ID : uuid:14125064-58c1-4073-a3ce-82f2269570cd Instance ID : uuid:7c7777d6-092c-4a70-8df5-7c0d9fa3f52a Page Count : 1 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools