OKIN Refined Electric Technology CB2343 Control Box User Manual CB 23 43
OKIN Refined Electric Technology Co., Ltd. Control Box CB 23 43
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3775059 |
| Application ID | 4BbzwUouzsoUjDus3VcgBQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 35.06kB (438255 bits) |
| Date Submitted | 2018-03-09 00:00:00 |
| Date Available | 2018-03-09 00:00:00 |
| Creation Date | 2018-03-09 19:20:02 |
| Producing Software | GPL Ghostscript 9.21 |
| Document Lastmod | 2018-03-09 19:20:02 |
| Document Title | Microsoft Word - CB.23.43_User Manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | baclsh51 |
Issue department Bedding Division Date Author 2017-08-23 Kyle Version 1.1 User Manual CB.23.43.03 Page 1 of 6 CB.23.43.03 Function instruction 1. Electrical configuration diagram Issue department Bedding Division User Manual CB.23.43.03 2017-08-23 Kyle Version 1.1 Page 2 of 6 2. Function Picture 3. Date Author Process of test 3.1. HEAD MOTOR Connect to head actuator,control by remote single: Issue department Bedding Division User Manual Date Author 2017-08-23 Kyle Version 1.1 CB.23.43.03 Page 3 of 6 Click head up button on the remote, head actuator moves out, stop when released Click headdown button，head actuator moves in, stop when released This function takes effect only by pressing the corresponding button on the remote. 3.2. FOOT MOTOR Connect to foot actuator,control by remote single: Click foot up button，foot actuator moves out，stop when released Click foot down button，foot actuator moves in，stop when released This function takes effect only by pressing the corresponding button on the remote. 3.3. Tilt MOTOR Connect to head actuator,control by remote single: Click Tilt up button on the remote, head actuator moves out, stop when released Click Tilt down button，head actuator moves in, stop when released This function takes effect only by pressing the corresponding button on the remote. 3.4. Lumbar MOTOR Connect to foot actuator,control by remote single: Click Lum bar up button，foot actuator moves out，stop when released Click Lum bar down button，foot actuator moves in，stop when released This function takes effect only by pressing the corresponding button on the remote. 3.5. Massage Connect to head& Foot&Lumbarmassage,control by remote: Click head massage + button,head massage strengthens by one level; Click head massage ‐ button,head massage weakenby one level; This function takes effect only by pressing the corresponding button on the remote. Issue department Bedding Division User Manual CB.23.43.03 Date Author 2017-08-23 Kyle Version 1.1 Page 4 of 6 3.6. Test for underbed light Click button of underbed light, turns on( or turns off ) the underbed light, switch the status once when click once This function takes effect only by pressing the corresponding button on the remote. 3.7. SYNC port Connect with the same other Control box or Other accessories; 3.8. USB Port Connect the USB function accessories. 3.9. Power LED& PAIRING LED Power supply for control box, PAIRINGLED of control box is blue,POWER LEDis green。 3.10. Power Connect to the 29V DC; 3.11. RESET button Press and hold the RESET button，the Head, Foot actuators will moves to lower position. 3.12. Pair Function Double click RESET button，pairing LED turns on，the control box enters into mode of code paring Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the remote enters into mode of code paring; The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that the code paring is successful; If fails, repeat all the processes above; Issue department Bedding Division User Manual CB.23.43.03 Date Author 2017-08-23 Kyle Version 1.1 Page 5 of 6 3.13. FLAT function Press and release the FLAT buttonon remote，the head and foot actuators moves to lower position(when the actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when press any buton This function takes effect only by pressing the corresponding button on the remote. 3.14. ZERO G position function Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop when press any button This function takes effect only by pressing the corresponding button on the remote. Issue department Bedding Division User Manual CB.23.43.03 Date Author 2017-08-23 Kyle Version 1.1 Page 6 of 6 FCC Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ISED RSS Warning: This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However,an there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfulth interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : baclsh51 Create Date : 2018:01:25 11:28:19+08:00 Modify Date : 2018:03:09 10:46:30-08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : baclsh51 Title : Microsoft Word - CB.23.43_User Manual Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:03:09 10:46:30-08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:4c9144fd-d3bc-4320-95be-bdec104ed9be Instance ID : uuid:da968615-d3e4-4116-9965-34ece837d4d0 Page Count : 6EXIF Metadata provided by EXIF.tools