OKIN Refined Electric Technology JLDP15013 Control Box User Manual CU358 2 A

Download:
Mirror Download [FCC.gov]
Document ID	3763825
Application ID	3rffgZ0SViQ9/FZkymdAHQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.86kB (410752 bits)
Date Submitted	2018-02-28 00:00:00
Date Available	2018-02-28 00:00:00
Creation Date	2018-02-28 06:55:00
Producing Software	GPL Ghostscript 9.21
Document Lastmod	2018-02-28 06:55:00
Document Title	Microsoft Word - CU358-2-A_User Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	baclsh67

Issuee departmennt：Bedding
g Division
User Manual
Datte：
Authhor：
Versiion：
1.1
Page 1 of
f 4
/'3



JLDP.15.013.001
1 Funcction in
nstructtion
1.
2017-05-03
Kyle
Electrical con
nfiguratio
on diagraam：
Remote control:RF366C
FCC ID: PCU-RF366C
IC:21319-RF366C
JLDP.15.013.001
2. Function Picture
Issue department：Bedding Division
Date：
Author：
2017-05-03
Kyle
User Manual
Version：
1.1
Page 2 of 4
JLDP.15.013.001
3.
Process of test
3.1. HEAD port
Connect to head actuator,control by remote single:
Click head up button on the remote, head actuator moves out, stop when released；
Click headdown button，head actuator moves in, stop when released；
This function takes effect only by pressing the corresponding button on the remote.
3.2. FOOT port
Connect to foot actuator,control by remote single:
Click foot up button，foot actuator moves out，stop when released；
Click foot down button，foot actuator moves in，stop when released；
This function takes effect only by pressing the corresponding button on the remote.
3.3. FOOT VIBRATION
Connect to foot massage,control by remote:
Click foot massage + button,foot massage strengthens by one level;
Click foot massage ‐ button,foot massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
3.4. HEAD VIBRATION
Connect to head massage,control by remote:
Click head massage + button,head massage strengthens by one level;
Click head massage ‐ button,head massage weakenby one level;
This function takes effect only by pressing the corresponding button on the remote.
3.5. MULTIFUNCTION port
Connect with the same other Control box or Other accessories;
Issue department：Bedding Division
User Manual
JLDP.15.013.001
Date：
Author：
2017-05-03
Kyle
Version：
1.1
Page 3 of 4
3.6. Power LED& PAIRING LED
Power supply for control box, PAIRINGLED of control box flashes for 4 times,and then turns off, POWER LED turns
on。
3.7. Power
Connect to the 29V DC;
3.8. RESET button
Press and hold the RESET button，the Head, Foot and Lumber actuators will moves to lower position.
3.9. Pair Function
Double click RESET button，pairing LED turns on，the control box enters into mode of code paring；
Press and hold the paring LED of Remote, the backlight of paring LED flashes, the backlight of remote flashes, the
remote enters into mode of code paring;
The backlight of paring LED of remote stops flashing, and the paring led of control box turns off, it indicates that
the code paring is successful;
If fails, repeat all the processes above;
3.10. Test for underbed light
Click button of underbed light, turns on( or turns off ) the underbed light, switch the status once when click once；
This function takes effect only by pressing the corresponding button on the remote.
3.11. FLAT function
Press and release the FLAT buttonon remote，the head and foot actuators moves to lower position(when the
actuator is free, can turn off the vibration motor and turn off the indicator light when press once )，stop when
press any buton；
This function takes effect only by pressing the corresponding button on the remote.
Issue department：Bedding Division
User Manual
Date：
Author：
2017-05-03
Kyle
Version：
1.1
Page 4 of 4
JLDP.15.013.001
3.12. ZERO G position function
Press and release ZERO G button on remote，the head and foot actuator moves to preset memory position，stop
when press any button；
This function takes effect only by pressing the corresponding button on the remote.
3.13. LOUNGE position function
Press and release LOUNGE on remote，t he head and foot act uat or m oves t o preset m em ory
posit ion, st op when press any but t on；
This function takes effect only by pressing the corresponding button on the remote.
3.14. TV position function
Press and release TV on remote，t he head and foot act uat or m oves t o preset m em ory posit ion,
st op when press any but t on；
This function takes effect only by pressing the corresponding button on the remote.
FCC Statement
Any Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation, Science and Economic Development Canada licence‐exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Issue department：Bedding Division
User Manual
JLDP.15.013.001
Date：
Author：
2017-05-03
Kyle
Version：
1.1
Page 4 of 4
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : baclsh67
Create Date                     : 2018:02:06 20:50:02+08:00
Modify Date                     : 2018:02:27 22:26:00-08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2018:02:27 22:26-08:00
Format                          : application/pdf
Title                           : Microsoft Word - CU358-2-A_User Manual
Creator                         : baclsh67
Document ID                     : uuid:24dbdb12-0b5f-49cc-9779-6585417d48d6
Instance ID                     : uuid:c022ba90-27a0-4cac-83a7-6d4dd40e2734
Page Count                      : 5

EXIF Metadata provided by EXIF.tools