OKIN Refined Electric Technology RF3011 Remote Control User Manual
OKIN Refined Electric Technology Co., Ltd. Remote Control Users Manual
Users Manual
Issue Department：Bedding Division Date： 2017-8-15
System Instruction Author：
Instruction of RF3011
Edition： 1.1
Page 1 of 5
1/5
Instruction of RF3011
Figure1buttonofremote
Issue Department：Bedding Division Date： 2017-8-15
System Instruction Author：
Instruction of RF3011
Edition： 1.1
Page 2 of 5
2/5
1. Item
1.1 ZG button（button 1 in figure 1）
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.2 AntiSnore button（button 3 in figure 1）
Click
AntiSnore
button, actuators move to
AntiSnore
position, stop when click any button
during movement；
Press and hold
AntiSnore
button for 5s, timer LED of remote flashes, the control box records
current position as
AntiSnore
position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.3 TV/PC button（button 4 in figure 1）
Click
TV/PC
button, actuators move to
TV/PC
position, stop when click any button during
movement；
Press and hold
TV/PC
button for 5s, timer LED of remote flashes, the control box records
current position as
TV/PC
position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.4 Childlock button（button 5 in figure 1）
In unlocked state, press and hold the childlock button, the red backlight of children lock
button begins to flash, after 5s, the red backlight stops flashing, remote entersl into locked
state;
Under locked state, press any button except childlock button, the red backlight of childlock
turns on, the button you pressed is invalid;
Issue Department：Bedding Division Date： 2017-8-15
System Instruction Author：
Instruction of RF3011
Edition： 1.1
Page 3 of 5
3/5
Under locked state, press and hold childlock button, red backlight of childrenlock begins to
flash,after 5s, the red backlight stops flashing, remote enters into the normal working
condition;
1.5 LOUNGE button（button 6 in figure 1）
Click
LOUNGE
button, actuators move to
LOUNGE
position, stop when click any button
during movement；
Press and hold
LOUNGE
button for 5s, timer LED of remote flashes, the control box records
current position as
LOUNGE
position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.6 Reset all memory positions to default settings（button 1 and 11 in figure 1）
Pressa and hold ZG+FLAT buttons
（button 1 and 16 in figure 2）for
5s, timer LED of
remote flashes, the control box reset all memory positions to default settings；
1.7 Head up（button 7 in figure 1）
Press and hold
HEAD UP button of remote, head actuator moves out, stop when
released
；
1.8 Head down（button 10 in figure 1）
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released；
1.9 Foot up（button 8 in figure 1）
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
1.10 foot down（button 9 in figure 1）
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released；
Issue Department：Bedding Division Date： 2017-8-15
System Instruction Author：
Instruction of RF3011
Edition： 1.1
Page 4 of 5
4/5
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
foot actuators start moving;
1.11 Flat（button 11 in figure 1）
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat；
FCC Waring：
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada licenceexempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
2
3
4
11
1
5
6
1
Power Cord AC
Power Supply
R5.504.01.250
JLDP.10.023.000
Power Cord AC
Remote model
(RF3011)
Power Supply
(JLDP.10.023.000)
SYNC.
Motor
Control Box
CB.11.20.01
Pair&Power Cord DC
Pair&Power Cord DC
Synchronization Cable
1
2
Control Box
Head Foot
R5.217.01.013
71
Motor/(Head&Foot)
Remote model
RF3011
Page 5 of 5
CB.11.20.01