OKIN Refined Electric Technology RF366C Remote Control User Manual RF366C UserManualx
OKIN Refined Electric Technology Co., Ltd. Remote Control RF366C UserManualx
Users Manual
Issuee departmennt:Bedding g Division Datte: Authhor: 2017-05-11 Kyle Pro oduct User Manual No:RF366C RF F366A/RF3 366B/RF36 66C Versiion: 1.1 Page 1 of 4 RFF366A//RF366B/RFF366C Functi on insstructio on 1. Electrical con nfiguratio on diagraam: Issuee departmennt:Bedding g Division Datte: Authhor: 2017-05-11 Kyle Pro oduct User Manual No:RF366C RF F366A/RF3 366B/RF36 66C Versiion: Page 2 o f 4 2. Functtion Picture RF366C RF366B Pairing Key 3. Process of test 3.1. Masssage Head 3 kinds of strrength of masssage head + stop status, cycle 3.2. Masssage Foot 3 kinds of strrength of masssage foot + stop status, cycle RF366A 1.1 Issue department:Bedding Division Date: Author: 2017-05-11 Kyle Product User Manual No:RF366C RF366A/RF366B/RF366C Version: 1.1 Page 3 of 4 3.3. Massage All off All Massage off 3.4. LED Light Light switch key 3.5. ZeroG Release after press, 2 lifts move to Zero‐G position 3.6. Head Lift + Press and maintain, head lift stretches out 3.7. Head Lift Press and maintain, head lift retracts 3.8. FLAT Press and release the FLAT button on remote,the head and foot actuators moves to lower position(when the actuator is free, can turn off the vibration motor and turn off the indicator light when press once ),stop when press any buton; 3.9. Foot Lift + Press and maintain, foot lift stretches out 3.10. Foot Lift Press and maintain, foot lift retracts Issue department:Bedding Division Date: Author: 2017-05-11 Kyle Product User Manual No:RF366C RF366A/RF366B/RF366C Version: 1.1 Page 4 of 4 3.11. Memory A Custom Memory Location A 3.12. Memory B Custom Memory Location B 3.13. Pairing Press this key for more than 1 second, the remote will enter pairing mode and a blue LED besides the pairing key will flash. Release this key to stop pairing .After the pairing is successful, LED will stop flashing. 4. Operation Frequency The RF366C has 78 channels (each spaced 1 MHz apart) in the frequency range 2403MHz to 2480MHz. The software program running in the RF366C will randomly select a channel for communications. The selected communications channel is changed whenever a button is pressed. 5. FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 6. ISED RSS Warning: This device complies with Innovation,Science and Economic Development Canada licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : baclks52 Create Date : 2017:05:11 16:43:26+08:00 Modify Date : 2017:06:14 21:29:01-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2017:06:14 21:29:01-07:00 Format : application/pdf Title : Microsoft Word - RF366C_UserManual.docx Creator : baclks52 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:ead33431-708e-4f3d-bd40-70495f837c13 Instance ID : uuid:2cce11bc-8cb2-412f-94a9-eb9417e4acd0 Page Count : 4EXIF Metadata provided by EXIF.tools