OKIN Refined Electric Technology RF39 Remote Control User Manual Instruction of RF3909 V0
OKIN Refined Electric Technology Co., Ltd. Remote Control Instruction of RF3909 V0
User Manual
Issue Department：Date： 2019.01.07
System Instruction Author：
Instruction of RF39 Edition： V0.0
Page 1 of 4
1/4
Instruction of RF39
1 Key description
1.1 appearance
Figure1buttonofremote
Issue Department：Date： 2019.01.07
System Instruction Author：
Instruction of RF39 Edition： V0.0
Page 2 of 4
2/4
2 Key description
HEAD UP: Press and hold head up button, head actuator moves out, stop when
released.
HEAD DOWN:Press and hold head down button, head actuator moves out, stop
when released.
FOOT UP:Press and hold foot up button, foot actuator moves out, stop when
released.
FOOT DOWN:Press and hold foot down button,foot actuator moves out, stop
when released.
FLAT:Press and hold flat button, the bed goes flat.
ZG:Click zeroG button, the bed moves to zeroG position, press and hold zeroG
button for 5s, until backlight flashes, the control set the current position as zeroG
position.
Issue Department：Date： 2019.01.07
System Instruction Author：
Instruction of RF39 Edition： V0.0
Page 3 of 4
3/4
M:Click M button, the bed moves to M position, press and hold M button for 5s,
until backlight flashes, the control set the current position as M position.
ANTI SNORE:Click antisnore button, the bed moves to antisnore position, press
and hold antisnore button for 5s until backlight flashes, the control set the current position
as antisnore position.
LIGHT:Click FLASH LIGHT button, open or close flash light.
FCC Warning：
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Innovation,Science and Economic Development Canada
licenceexemptRSS standard(s). Operation is subject to the following two conditions: (1) this
devicemay not cause interference, and (2) this device must accept any interference,
includinginterference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'ISED applicables aux appareils radioexempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,même si le
brouillage est susceptible d'en compromettre le fonctionnement.
ISED RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled
environment.The device has been evaluated to meet general RF exposure requirement.
Le matériel est conforme aux limites de dose d'exposition aux rayonnements énoncés pour fac un
autre environnement.ce dispositif a été évalué à satisfaire l'exigence générale de l'exposition aux
rf.
Issue Department：Date： 2019.01.07
System Instruction Author：
Instruction of RF39 Edition： V0.0
Page 4 of 4
4/4
FCC ID: PCU-RF39
IC：21319-RF39
FCC ID：PCU-CB1220
IC: 21319-CB1220