OMBEA RP-01 OMBEA Response System User Manual OMBEA Response user guide
OMBEA AB OMBEA Response System OMBEA Response user guide
OMBEA >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2236589 |
| Application ID | lVZsXJJtJECC9D/uh3OviQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 103.39kB (1292434 bits) |
| Date Submitted | 2014-04-09 00:00:00 |
| Date Available | 2014-10-07 00:00:00 |
| Creation Date | 2014-04-03 08:25:57 |
| Producing Software | novaPDF Professional Desktop Ver 7.5 Build 376 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64)) |
| Document Lastmod | 2014-04-07 13:08:46 |
| Document Title | OMBEA Response user guide |
| Document Creator | OMBEA AB |
| Document Author: | OMBEA AB |
OMBEA Response ® User Guide ver. 1.4.0 OMBEA Response – User Guide Thank you for choosing an Audience Response System from OMBEA. Please visit www.ombea.com to get the latest updates for your system. Copyright © 2014 OMBEA AB. All rights reserved. With the exception of that which follows from compulsory legal requirements, OMBEA AB is under no circumstances responsible for loss of data, income or any special, temporary, consequential, or indirect damages, regardless of the cause of the loss or damage. NO PART OF THIS DOCUMENT MAY BE REPRODUCED IN ANY FORM OR IN ANY WAY, OR TRANSLATED INTO ANY LANGUAGE AT ANY TIME WITHOUT PRIOR WRITTEN PERMISSION FROM OMBEA. OMBEA RESERVES THE RIGHT TO CHANGE THIS DOCUMENT OR WITHDRAW IT WITHOUT ANY PRIOR NOTICE. ResponsePad™ and ResponseLink™ have been tested and are in compliance with the following EC directives: EN 300 328 EN 300 328 EN 301 489 EN 60950-1 EN 55022 EN 55024 For further information and for a declaration of conformity, please contact OMBEA support. 1 | Document ver. 1.1 FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/ TV technician for help. CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2 | Document ver. 1.1 OMBEA Response – User Guide Chapter 1. Installation ...................................................................................6 Installation........................................................................................................6 Connecting OMBEA ResponseLink to the PC for the first time ............................... 6 Starting OMBEA Response .............................................................................7 Chapter 2. Working with interactive slides ...................................................8 Add interactive slides .......................................................................................8 Multiple choice questions ....................................................................................... 8 Priority ranking questions ....................................................................................... 8 Group result slides ................................................................................................. 8 Comparison slides.................................................................................................. 9 Leaderboard slides................................................................................................. 9 Free text questions................................................................................................. 9 Attendance questions............................................................................................. 9 Properties ........................................................................................................9 Change the chart type ............................................................................................ 9 Change colors ........................................................................................................ 9 Change the chart template ................................................................................... 10 Format chart values ............................................................................................. 10 Changing the answer list style .............................................................................. 10 Using a time limit .................................................................................................. 10 Show countdown .................................................................................................. 10 Show statistics board ........................................................................................... 10 Play Audio during a poll........................................................................................ 11 Change the number of responses per participant ................................................. 11 Allow duplicates ................................................................................................... 11 Change how the poll is closed .............................................................................. 11 Change when the chart is shown ......................................................................... 11 Group participants ................................................................................................ 11 Define answer score ............................................................................................ 12 Change first position of the leaderboard ............................................................... 12 Change the number of positions in the leaderboard ............................................. 12 Compare the average score for groups in the leaderboard ................................... 12 Change the default property values ...................................................................... 12 Anonymous interactive slides ........................................................................12 Chapter 3. Participant list ............................................................................13 3 | Document ver. 1.1 Working with the participant list .....................................................................13 Add and remove columns..................................................................................... 13 Add and remove participants ................................................................................ 13 Add a participant list ............................................................................................. 13 Rename columns ................................................................................................. 13 Sort by column ..................................................................................................... 14 Participant ID ....................................................................................................... 14 Device ID ............................................................................................................. 14 Create and delete groups ..................................................................................... 14 Add and delete group members ........................................................................... 14 Save a participant list to file .................................................................................. 14 Chapter 4. Session management .................................................................15 Save and open a session...............................................................................15 Upload session results to OMBEA Connect...................................................15 Clear results...................................................................................................15 Clear session history ............................................................................................ 15 Clear results from a single interactive slide .......................................................... 15 Clear results from all interactive slides ................................................................. 15 Chapter 5. Poll .............................................................................................16 Controlling the poll .........................................................................................16 Starting the poll .................................................................................................... 16 Closing the poll..................................................................................................... 16 Restarting a poll ................................................................................................... 16 Opening the Result Monitor.................................................................................. 16 Insert an On-The-Fly question .............................................................................. 16 Simulate response input ................................................................................16 Chapter 6. Response devices .......................................................................17 Configure ResponseApp ................................................................................17 Configure ResponsePads ..............................................................................17 Change channel ................................................................................................... 17 Synchronize and update....................................................................................... 17 Test the ResponsePads ....................................................................................... 17 Configure RemotePad ...................................................................................18 Button explanation ............................................................................................... 18 Pair with OMBEA Response................................................................................. 18 4 | Document ver. 1.1 OMBEA Response – User Guide Change the programmable buttons ...................................................................... 18 Chapter 7. Reports ......................................................................................19 Generate a report ..........................................................................................19 Scoring Report ..................................................................................................... 19 Question Analysis Report ..................................................................................... 19 Group Report (percentage) .................................................................................. 20 Group Report (count) ........................................................................................... 20 Attendance Report ............................................................................................... 20 Participant List with Total Score ........................................................................... 21 Participant List with Total Score and Grades ........................................................ 21 Participant Report ................................................................................................ 21 Question List ........................................................................................................ 21 Participant List ..................................................................................................... 21 Response Report ................................................................................................. 21 Chapter 8. Presentation Settings.................................................................23 Filling out Device ID automatically ........................................................................ 23 Choose the expected number of participants ....................................................... 23 Backup ................................................................................................................. 23 Choose the monitor on which the Poll Info should be shown ................................ 23 Choose the monitor on which the presenter windows should be shown ............... 23 Chapter 9. Troubleshooting .........................................................................24 Chapter 10. Terms and conditions.................................................................26 5 | Document ver. 1.1 Chapter 1. Installation OMBEA Response helps you to engage your audience and analyze their opinions and knowledge - all without you having to leave Microsoft® PowerPoint®. Installation Install OMBEA Response by downloading the software from the Internet. Note: To install OMBEA Response, it is required that you are an administrator on the computer. If you are unsure about this, please contact the local system administrator before starting the installation. Installing from the Internet: 1. Download OMBEA Response from www.ombea.com. 2. Double click on the ORSetup.exe file and follow the instructions on screen. 3. Double click on the OMBEA Response icon on your desktop. 4. The OMBEA Response tab will appear in the top left corner of your PowerPoint window. Connecting OMBEA ResponseLink to the PC for the first time When you connect OMBEA ResponseLink to the PC for the first time, the drivers will be automatically installed. Note: It may take a few minutes to install the drivers. The installation process can be followed via the task bar next to the system clock. 6 | Document ver. 1.1 OMBEA Response – User Guide Starting OMBEA Response You start OMBEA Response by clicking on the OMBEA Response icon, either on your desktop, in the start menu or in the installation folder. alternatively When you start OMBEA Response, Microsoft ® PowerPoint ® opens with the OMBEA Response tab activated. The OMBEA Response tab contains all the tools you need to create an interactive presentation. 7 | Document ver. 1.1 Chapter 2. Working with interactive slides Interactive slides provide different ways of engaging your audience during a presentation. Add interactive slides Multiple choice questions A multiple choice question slide allows you ask a question with up to 10 answer options to your audience, collect the responses and present the result as an embedded chart. Insert a multiple choice question slide by clicking on New in the ribbon group Quick Start and then select a result chart type under Multiple Choice. Priority ranking questions A priority ranking question allows participants to rank the answer options by submitting multiple responses to the question. The answer options are scored based on the response weights shown in the table below. Order First response Second response Third response Fourth response Fifth response Sixth response Seventh response Eighth response Ninth response Tenth response Weight 10 Insert a priority ranking slide by clicking on New in the ribbon group Quick Start and then click Priority Ranking. Then select the number of allowed responses per participant in the shown dialog. Group result slides A group result slide shows the question result of different participant groups in your audience. Learn more about participant groups by reading Group participants and Create and delete groups. Insert a group result slide by 8 | Document ver. 1.1 OMBEA Response – User Guide clicking on New in the ribbon group Quick Start and then clicking on Analysis and Group result. Then select the question and the groups of which you want to display the result. The group result slide can also show the result for participants connected to multiple groups. This is done by adding combination groups. For example, if you first selects the groups of women and men and the combination groups sellers and developers, the group result slide will show the result for the group combinations female sellers, female developers, male sellers and male developers. Comparison slides A comparison slide shows a comparison between the two most recent results of a question. You insert a comparison slide by clicking on New in the ribbon group Quick Start, and then clicking on Analysis and Comparison. Then select the question for which you want to compare the results. Leaderboard slides A leaderboard slide shows the current top scores of different groups or individual participants. Leaderboard slides are automatically updated after each polled question. Learn more about how to define the score for the different answers of a question by reading Define answer score. Insert a group leaderboard slide by clicking on New in the ribbon group Quick Start and then clicking on Competition and Group Leaderboard. Insert a participant leaderboard slide by clicking on New in the ribbon group Quick Start and then clicking on Competition and Participant Leaderboard. Free text questions A free text question allows participants to submit an opened ended response. Insert a free text question slide by clicking on New in the ribbon group Quick Start and then click Free Text. Note: Free text questions are supported by the following response input methods: OMBEA ResponseApp. A free text response can have up to 180 characters. Attendance questions An attendance slide allows you mark class attendance. The result is available in the attendance report. Insert an Attendance slide by clicking on New in the ribbon group Quick Start and then click Attendance. Properties Each interactive slide has properties associated with it. The properties determine the appearance and behavior of the interactive slide. Change the chart type To change the chart type of a question slide, click Properties. Under Chart set the Chart type to one of the available chart types. Change colors 9 | Document ver. 1.1 To change the colors of the answers for a question slide, click Properties. Under Chart set the Chart color mode to User specified and then select the color of each answer. Change the chart template If you want to customize some feature of a chart which is not exposed by properties, you can choose to disable the OMBEA chart template. To disable the OMBEA chart template, click Properties. Under Chart set Apply OMBEA chart template to No. You can now manually customize the chart of the interactive slide by double-clicking on the chart and choosing Edit existing. Format chart values The values of the chart can be presented as the response percentage for each answer or as the total number of responses for each answer. To select the chart format click Properties. Under Chart set the Chart value format to Percentage or Responses. Changing the answer list style To change the answer list style of a question click Properties. Then set the Answer list style to the desired style. The available styles are, A-J), AJ., a-j), a-j., 1-10) and 1-10.. Using a time limit You can limit the amount of time the participants have available to respond to a question. When the time limit has been reached the poll is automatically closed. To set a time limit for a question, click Properties. Under Poll set Time Limit (seconds) to the number of seconds available to the participants. When a question slide with a time limit and a countdown is presented during the slide show you start the countdown by advancing the Slide show, for example, by pressing the left mouse button or pressing the Enter key. Show countdown If you have set a time limit for a question slide you can show a countdown of the remaining time. To show a countdown click Properties. Under Poll set Show countdown to Yes. When a question slide with a time limit and a countdown is presented during the slide show you start the countdown by advancing the Slide show, for example, by pressing the left mouse button or pressing the Enter key. Show statistics board You can insert a statistics board in a question slide showing: Response mean value. Response standard deviation. Response median. Response time mean value. Response time standard deviation. 10 | Document ver. 1.1 OMBEA Response – User Guide Net Promoter Score. To insert a statistics board in a question slide click Properties. Under Poll set Show statistics board to Yes. Play Audio during a poll If you want an audio file to be played during the poll, select Properties. Under Poll set Sound to the path to the audio file. The audio file is automatically played when the poll is opened. Note: It is only the audio file path that is saved in the session and not the audio file itself. Therefore if you copy the session file to a different computer you must also copy the audio file. Change the number of responses per participant If you want to change the number of responses per participant, select Properties. Under Poll set Responses per participant. A response sequence is changed by selecting a non-represented alternative or by exceeding the number of allowed responses. Both imply a red flash indicating that the response sequence has been resetted. Allow duplicates If you want to allow your participants to send response duplicates, select Properties. Under Poll change Allow duplicates to Yes. Change how the poll is closed By default an open poll is closed when either of the following occurs. The slide show is advanced, for example by pressing the left mouse button or the Enter button. The question time limit has been reached. All of the participants have responded. If you do not want the poll to be automatically closed as soon as all of the participants have responded, select Properties. Under Poll set Close poll to manually. Now the poll is no longer automatically closed when all of the participants have responded. Change when the chart is shown By default the result chart of a question slide is automatically shown when the poll is closed. If you do not want the result chart to be automatically shown, click Properties. Under Poll set Show Chart to Manually. When the poll is closed you can now show the chart by advancing the show, for example by pressing the left mouse button or pressing the Enter key. Group participants If you want to dynamically divide the participants into groups according to their answers, select Properties. Under Miscellaneous set Grouping to Yes. . 11 | Document ver. 1.1 You can also divide the participants into groups in advance via Participant Manager. The group results can be shown directly in the slide show by inserting a Group Result slide alternatively afterwards in the Group report. Define answer score If you want to assign points for a particular answer, click Properties. Assign the points for an answer by defining the Answer points for the answer. You can also define the points for an answer below the OMBEA Response tab. You can show the current top scores of different groups or individual participants during the slide show by inserting a leaderboard slide. The participant scores can also be analyzed in the Scoring report. Change first position of the leaderboard To change the first position of the leaderboard, select Properties. Set First pos. Leaderboard for groups or First pos. Leaderboard for participants to the number of positions to be shown. Change the number of positions in the leaderboard To change the number of positions that are shown in a leaderboard slide, select Properties. Set Pos. Leaderboard for groups or Pos. Leaderboard for participants to the number of positions to be shown. Compare the average score for groups in the leaderboard Sometimes it may be desirable to compare the average score for groups instead of the total score, such as when the number of group members differs. If you want to compare average scores for groups in a leaderboard, select Properties. Set Compare average scores for groups to Yes. Change the default property values General properties determine the default appearance and behavior of a created interactive slide. If you want to change the default property values, select Properties. Select General properties in the left column of the properties dialog. Then define the default values of the desired properties. If you want the changes to also apply to the already existing interactive slides, press Apply to all. Anonymous interactive slides If you want your participants Device ID to be hidden in the session results, check Anonymous. 12 | Document ver. 1.1 OMBEA Response – User Guide Chapter 3. Participant list Working with the participant list Click Participant Settings to manage the participant list for the session. Add and remove columns If you want to add a column, select Add column. A dialog box will then appear and ask you to select a name for the column or if the column should specify the voting weights. To remove the column you simply right-click on the column name and select Remove column. Add and remove participants To add a participant, select Add participant and a new row is added at the bottom. If you want to remove a participant, select the row that corresponds to the participant you want to remove, and select Remove participant. Add a participant list To open an existing participant list, press Add participant list and locate the file you want to open. Rename columns To change the name of a column, right-click on the column name and select Rename column. 13 | Document ver. 1.1 Sort by column To sort your participant list based on a particular column, click on the column name. Participant ID Participant ID is a unique identification number for each participant. OMBEA Response generates these numbers automatically. Device ID Device ID is a unique identification number for each response device located on the back of the ResponsePad device alternatively in the status field for ResponseApp. Thanks to the unique participant ID you can change response devices during a session without losing the connection to past results. You can fill out the cell for the Device ID in two different ways: A Automatically, by selecting the participant for whom you want to enter a device ID and press a button on the response device that you want to connect the participant to. The Participant Manager then automatically fills the correct cell and jumps down to the row below. B Manually, enter the Device ID by editing each cell. Create and delete groups You can use groups to divide your participant list into smaller groups, i.e. Class 8A and Class 8B, Girls and Boys or Sales department and Marketing department. If you want to add a group, click on Add group and then specify the name of the group. If you want to remove a group, select the group, right-click and choose Remove Group. Add and delete group members If you want to add one or more participants to a group, select Participant list in the left column. Then select the participants that you want to add to a group and drag them over to the desired group. Alternatively you can add one or more participants to a group by right-clicking on each of the participants that you want to add a group and selecting Add to group. If you want to remove one or more participants from a group, select the group in question, right-click on the participant and select Remove from group. Alternatively, you can remove one or more participants from a group by rightclicking on the participants that you want to remove and choose Remove from group. Save a participant list to file To save your participant list, press Save to file. 14 | Document ver. 1.1 OMBEA Response – User Guide Chapter 4. Session management Save and open a session When you work in OMBEA Response you save and open sessions in the same way as you would with a standard Microsoft® PowerPoint® presentation. When you save an OMBEA Response session, you also save the PowerPoint® presentation, the result and participant list in the same file format, .ors. Doubleclick on a saved OMBEA Response session to open it in OMBEA Response. Upload session results to OMBEA Connect To upload session results to OMBEA Connect, select Upload. Enter your username, password, the session file as well as a session file name and press Upload. Do not have a presenter account? Please contact your system administrator or contact OMBEA support. Clear results Clear session history To clear all the results that are linked to the current session, press Clear Result and select Session history. Clear results from a single interactive slide To clear the results from a single interactive slide, press Clear Result and select Selected interactive slide. Note: Only the chart will be cleared, the result data will still be available in the session history. Clear results from all interactive slides To clear the results from all interactive slides in a presentation, press Clear Result and select All interactive slides. Note: Only the charts will be cleared, the result data will still be available in the session history. 15 | Document ver. 1.1 Chapter 5. Poll Controlling the poll When an interactive slide is presented a box is shown in the upper right corner. This box shows how many responses that have been received and if the poll is open or closed. Starting the poll If the interactive slide does not contain any previous results and the slide does not contain a time limit countdown, the poll will start automatically. If the slide contains a time limit countdown you open the poll by advancing the slide show, for example by pressing the left mouse button or the Enter key. Closing the poll You close the poll by advancing the Slide show, for example, by pressing the left mouse button or the Enter key. The poll is automatically closed when the expected number of responses have been received or when the question time limit has been reached. Restarting a poll To restart a poll, press Restart or press the F8 key on the keyboard. Opening the Result Monitor The Result Monitor gives you the possibility to review the result of a question without showing it to the participants. You open the Result Monitor by pressing the F12 key on the keyboard during the Slide show. Insert an On-The-Fly question A question slide can be inserted during the Slide show by pressing the F9 key on the keyboard. In the appearing window, enter your question, your answers and select the chart type, then press Insert. Simulate response input Check Response Input: Simulated to test your interactive presentation by simulating the responses from your participants. 16 | Document ver. 1.1 OMBEA Response – User Guide Chapter 6. Response devices Configure ResponseApp In order for ResponseApp users to be able to connect to your session, you first need to login to your presenter account. Login to your presenter account by clicking ResponseApp, enter your username and password and press Login. Do not have a presenter account? Please contact your system administrator or contact OMBEA support. The user manual for ResponseApp can be found at: www.ombea.com Configure ResponsePads Change channel In order to prevent interference with a nearby OMBEA Response system press ResponsePad and Change channel. Note: After changing the channels, the ResponsePads must be synchronized. See synchronize and update. Synchronize and update When the channels have been changed synchronization is required To synchronize the devices: 1. 2. 3. 4. Click on ResponsePad, select Synchronization and press Start. In order to synchronize a ResponsePad device, press the yellow button for 5 seconds. A yellow LED light starts flashing which indicates the ongoing synchronization. A successful synchronization is indicated on the screen by the participant getting highlighted in yellow as well as by an LED showing green light on the ResponsePad device. When all the devices have been synchronized, exit the synchronization by pressing on Stop. Test the ResponsePads 17 | Document ver. 1.1 To test the system prior to a presentation: 1. Click on ResponsePad, select Poll Test and press Start. 2. To test a ResponsePad device press any of the buttons 1A-10J. 3. A successful test is indicated on the screen by the participant getting highlighted in green as well as by an LED showing green light on the ResponsePad device. 4. When all the devices have been tested, end the test by pressing Stop. Configure RemotePad OMBEA RemotePad™ is a remote control for OMBEA Response and Response OMBEA 360. This means that you are no longer bound to the computer, you can walk around freely in the classroom and still be able to control the polling. Button explanation Corresponds to the right arrow and left arrow on your keyboard. Start, stop a restart a poll. Programmable button. Pair with OMBEA Response To pair a RemotePad with OMBEA Response, press ResponsePad, and then click Pair RemotePad. Press a button on the RemotePad. The Device ID of the RemotePad is displayed. Press Save. The RemotePad is now paired with OMBEA Response. Change the programmable buttons The RemotePad device has four programmable buttons. To set what the buttons do, click Settings and select the function of each button under the heading RemotePad. 18 | Document ver. 1.1 OMBEA Response – User Guide Chapter 7. Reports Generate a report By generating reports you can visualize and analyze the results saved in the session history. To generate a report, press Reports and select the report you want to generate. Question Report The Question Report contains the following information for each question in the session: • Answer alternatives. • Number of responses per answer alternative. • Percentage of responses per answer alternative. • Column chart showing the results. Requirements: none. Scoring Report The Scoring Report contains the following information for each question in the session: • Number of responses. • Achieved average score. • Assigned max points. The Scoring Report contains the following information for each participant: • Answer to each question. • Score for each question. • Color code: Red = min score (usual 0 p). Green = highest score. Yellow = other scores. • Total session score. Requirements: the session contains scored questions. Question Analysis Report The Question Analysis Report contains the following information for each question in the session: • Answer alternatives. • Highlighted corrected answers. • Number of responses per answer alternative. 19 | Document ver. 1.1 • Percentage of responses per answer alternative. • Difficulty index. • Discrimination index. • Column chart showing the indices. The difficulty Index (D) measures the proportion that answered correctly. D varies between 0 and 1. D = 1 indicates that the question is considered to be very simple, while D = 0 indicates that the question is considered to be very difficult. The discrimination index (DI) measures how well the question distinguishes participants with high total scores from participants with low total scores. DI varies between -1 and 1. A negative DI indicates that participants with low total scores are more likely to answer the question correctly than participants with high total scores, suggesting that the question should be modified. A positive DI indicates that participants with high total scores are more likely to answer the question correctly, suggesting that the question is well formulated. ℎ ℎ ℎ ℎ ℎ ℎ 25% ℎ ℎ ℎ ℎ 25% ℎ ℎ ℎ ℎ − 0.5( Requirements: the session contains none anonymous question and answer alternatives with assigned points. Group Report (percentage) The Group Report contains the following information for each question in the session: • Percentage participants in each group who answered a certain answer alternative. Requirements: the session contains static or dynamic groups. Group Report (count) The Group Report contains the following information for each question in the session: • Number of participants in each group who answered a certain answer alternative. Requirements: the session contains static or dynamic groups. Attendance Report 20 | Document ver. 1.1 OMBEA Response – User Guide The Attendance Report contains the following information for each participant: • A field showing whether the participant where present or not during the attendance slide. Requirements: the session contains at least one result for an attendance slide. Participant List with Total Score The Participant List with Total Score contains the following information for each participant: • A field showing the total score. Requirements: the session contains scored non-anonymous questions. Participant List with Total Score and Grades The Participant List with Total Score and Grades contains the following information for each participant: • A field showing the total score. • A field showing the grade based on provided limits. The Participant List with Total Score and Grades contains the following information for the session: • A pie chart showing the percentage of participants who achieved each grade. Requirements: the session contains scored non-anonymous questions. Participant Report The Participant Report contains the following information for each participant: • Answer to each question. • Score on each question. • Column chart showing the total score compared to the average score. Requirements: the session contains scored non-anonymous questions. Question List The Question List contains the following information for each question: • Answer alternatives. Requirements: none. Participant List The Participant List contains the following information for each participant: • Participant ID • DeviceID • Other fields present in the Participant List Manager. Requirements: the session contains non-anonymous questions. Response Report 21 | Document ver. 1.1 The Response Report contains the following information for each question: • Device ID • Response text. • Response time. • Response score. Requirements: none. 22 | Document ver. 1.1 OMBEA Response – User Guide Chapter 8. Presentation Settings Filling out Device ID automatically You can choose whether or not you want the Device ID field in the Participant Manager to be filled out automatically when pressing a response device button. You choose this by pressing Presentation Settings. Choose the expected number of participants If you a running an anonymous session you can specify the expected number of participants and thus allow automatic closing of the poll when all participants have answered. Backup You can choose to automatically back up your sessions every time you save a session by pressing Presentation Settings and enabling backups. The backups are saved in the folder OMBEA Response in My documents. Choose the monitor on which the Poll Info should be shown If you want to change the monitor on which the Poll Info should be shown press Presentation Settings and then Show the Poll Info on Monitor 2. Choose the monitor on which the presenter windows should be shown If you want to change the monitor on which the presenter windows should be shown press Presentation Settings and then Show the presenter windows on Monitor 2. 23 | Document ver. 1.1 Chapter 9. Troubleshooting By following the troubleshooting procedure below you will be back on track as soon as possible.. I have problems with OMBEA Response. Step 1 Restart the computer and then start OMBEA Response. Step 2 If the problem is not solved: Open Microsoft® PowerPoint®, disable all add ins and make sure that OMBEA Response is not among the disabled add ins. Shut down Microsoft® PowerPoint® and try to open OMBEA Response again. Step 3 If the problem is not resolved or if the problem reappears, please contact Support at support@ombea.com or 08-57239010. There is no contact with OMBEA ResponseLink. Step 1 Click ResponsePad and identify the ResponseLink status in the top of the window frame. Step 2 In case the status is disconnected, proceed to Step 3. In case the status is connected, proceed to the next topic. Step 3 Disconnect OMBEA ResponseLink. Step 4 Wait 15 seconds. Step 5 Connect OMBEA ResponseLink to a different USB port. Step 6 If the problem persists: Restart the computer and try again. Step 7 If the problem persists or if the problem reappears, please contact Support at support@ombea.com or 08-57239010. The status of the ResponseLink is connected but there is still no contact with the OMBEA ResponsePad devices. Step 1 Disconnect OMBEA ResponseLink. 24 | Document ver. 1.1 OMBEA Response – User Guide Step 2 Wait 15 seconds. Step 3 Connect OMBEA ResponseLink to a different USB port. Step 4 Open ResponsePad, select Poll test and press Start. Press a key on a ResponsePad device. Solve any fix and warning messages. Step 5 If the problem persists or if the problem reappears, please contact Support at support@ombea.com or 08-57239010. 25 | Document ver. 1.1 Chapter 10. Terms and conditions Restrictions: The software is confidential copyrighted information belonging to OMBEA AB. Customers may not modify, decompile, disassemble, decrypt, extract, or in any other manner reverse the development process of OMBEA Response®, OMBEA ResponsePad™, OMBEA ResponseLink™ or OMBEA ResponseApp™. Parts or all of the software may not be rented out, disseminated or sublicensed. © 2014 OMBEA AB. All rights reserved. OMBEA Response® is a registered trademark that belongs to OMBEA AB, Microsoft®, PowerPoint® and Excel® and is a registered trademark of Microsoft Corporation. OMBEA AB MAKES NO GUARANTEES, EXPLICIT OR IMPLICIT, REGARDING THE INFORMATION IN THIS USER MANUAL. 26 | Document ver. 1.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : OMBEA AB Create Date : 2014:04:03 08:25:57+01:00 Modify Date : 2014:04:07 13:08:46+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : OMBEA AB Title : OMBEA Response user guide Creator Tool : OMBEA AB Metadata Date : 2014:04:07 13:08:46+08:00 Producer : novaPDF Professional Desktop Ver 7.5 Build 376 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x64)) Document ID : uuid:e5d47d31-0b13-4294-a4d9-31aa2f69b595 Instance ID : uuid:ddecb258-0d1f-4837-a7c4-57385391e4b0 Page Layout : OneColumn Page Mode : UseThumbs Page Count : 27EXIF Metadata provided by EXIF.tools