OPENBRAIN Technologies A1-002 Bluetooth Handsfree Kit User Manual A1 manual eng 080617
OPENBRAIN Technologies Co., Ltd. Bluetooth Handsfree Kit A1 manual eng 080617
User Manual
1
1
3
3
CONTENTS
Introduction 4
Product Functions & Features 4
What’s included in the Package 4
Description of Parts 5
Clipping the A1 onto Sun Visor 5
OLED Display 5
Charging the Battery 6
Switching the A1 ON/OFF 6
Echo & Noise Cancellation 7
Pairing and Connecting A1 with Bluetooth Devices 8
Using A1 for Handsfree Operations 9
Audio Tuning A1 with My Cell Phone 11
Specifications 12
Safety Instructions
z Check the laws and regulations on the use of mobile phones and
handsfree equipments in areas you intend to use.
z As much as possible, do not manipulate the buttons of the device
while driving.
z Do not expose the device to direct sunlight especially on the
dashboard of car in hot summer as it may cause product deformation
and even battery explosion. For safety, store the device in glove or
console box when not in use.
z When cleaning the device, do not use any type of abrasive pad,
scouring powder or solvents as these may render the finish dull
permanently.
z When charging the device using AC/DC adapter, please make sure
the correct input voltage is used.
z When using the device for the first time, charge the battery fully until
‘Charged’ is displayed.
z Do not use in places like hospitals, airplanes etc. where use of
electronic devices is prohibited.
z Do not expose the device to extremes of temperature, moisture and
vibrations.
z Risk of explosion if battery is replaced by an incorrect type. Dispose
of used battery according to the instructions.
4
Introduction
The sonorix Bluetooth Handsfree Kit A1 is a state-of-the-art device for handsfree
operations at its best. It functions as 'Car Handsfree Kit' or 'Portable
Speakerphone' when linked to Bluetooth phones supporting Headset or
Handsfree profiles.
Uniquely designed to be portable and versatile, A1 provides you with maximum
comfort and satisfaction for all of your handsfree needs whether you use the
device in car, outdoor or in office.
We hope you enjoy the unique features provided by sonorix.
Product Functions & Features
What’s included in the Package
z Bluetooth Handsfree Kit A1
z Sun Visor Clip
z AC/DC Adaptor
z User Manual
Car Movement Detection –
Automatic Link Connection
Enhanced Echo & Noise
Cancellation via DSP
Car Kit and Speakerphone Modes
(
Automatic Mode Switchin
g
& Invertible Dis
p
la
y
)
Caller ID
Display Function
03
1
5966
4
00
5
5
Description of Parts
Clipping the A1 onto Sun Visor
z Mount the clip onto the back of A1 and slide the clip onto sun visor as
shown below.
OLED Display
Car Handsfree Mode: Optimum voice
qualit
y
when mounted onto sun visor.
Speakerphone Mode: Optimum voice
quality when placed upright.
Bluetooth Connected
Bluetooth Disconnected
Buttons locked
Buttons unlocked
Hold Indicato
r
Mode Indicato
r
Bluetooth Connection Status
Battery Indicato
r
Speaker
Display
Volume Control
Mute/Hold
Microphone
USB Port
(only charging) Power Switch
MFB
6
Charging…
Charged
Charging the Battery
z When using the device for the first time, charge the battery fully until
‘Charged’ is displayed on window. This will optimize the battery calibration.
z If battery level is at its low, battery level indicator icon will be displayed as empty.
z To charge the battery, connect the handsfree kit to AC/DC power adapter.
z During charging, the battery level indicator will
flash with ‘Charging’ displayed in static motion.
When charged, the text ‘Charged’ will be displayed
in flashing motion.
Note: When A1 is connected to USB for charging,
the Bluetooth link will be automatically
disconnected. When USB is unplugged, A1 will automatically attempt to
reconnect to the last connected device.
(The USB port is used for charging only.)
Switching the A1 ON/OFF
z To switch on A1, slide the power switch to O. With a boot tone, it will first
display the sonorix logo followed by connection state icons and battery level
indication. For battery power saving, display will turn off after 10 seconds.
z To switch off A1, slide the power switch to X.
Except during talk mode, battery power consumption is very low and therefore, it is not
necessary to switch off power. And by keeping the A1 switched on, you can enjoy the special
feature of “Automatic Connection” with phone when car engine is started. Switch off power only
if device will not be used for more than 1 month.
A1 is equipped with ‘Automatic Mode Switching’ as
well as ‘Automatic Invertible OLED’ functions.
‘Automatic Mode Switching’ sets the best talk
environment for user depending on where the A1 is
used. If A1 is clipped onto sun visor, it automatically
enters into ‘Car Handsfree’ mode and when placed
on table, it enters into ‘Speakerphone’ mode.
(patent pending) Also, the OLED display will be
automatically inverted depending on whether the
A1 is placed upright or upside down.
For battery power saving, display automatically
switches off after 10 seconds. To view the display
a
g
ain, short click volume u
p
or down buttons.
Automatic Mode Switchin
g
& Invertible Dis
p
la
y
Function
7
7
Echo & Noise Cancellation
z DSP(Digital Signal Processor) integrated in A1 eliminates echo and noise
thereby providing clear voice quality even under harsh environmental
conditions.
z If A1 is used as ‘Car Handsfree’ mode in car, it eliminates surrounding noise
(engine noise, wind noise, surrounding noise, radio sound etc.) and delivers
clear voice to the other party. Also, it eliminates echo signals created by
transmission of car speaker
sounds to the microphone. The
above mechanism for echo and
noise cancellation is realized
through the use of 2 microphone
system and high-tech algorithm
which cancels out unnecessary
noise and delivers only the user
voice. The directional
microphones process only the
user voice signal and therefore,
for best performance for use in
car, mount the A1 onto sun visor.
z On the other hand, if A1 is used as ‘Speakerphone’ mode, it doesn’t matter in
which direction the A1 is placed
as noise signals generated from
all directions will be processed
thereby making it suitable for
conference calls. However, it is
important to note that the
performance of ‘Speakerphone’
mode may not be as good as
‘Car Handsfree’ mode since it
allows influx of noise from all
directions and this mode is only
recommended for use in quiet
environment.
z The transition from one mode to
another and vice-versa takes place automatically. That is, if A1 is placed
upright, ‘Speakerphone’ mode will be activated and likewise, if it is placed
upside down, ‘Car Handsfree’ mode will be activated. However, this automatic
mode transition doesn’t take effect during talk mode.
8
Pairing and Connecting A1 with Bluetooth Devices
Charging…
Function Action Display
Pairing
Mode
To put A1 in pairing mode, while pressing MFB,
slide Power Switch from x to o. Keep pressing until
you see ‘Wait for Pairing’, sonorix A1 and
Bluetooth Device Address. A1 is now ready to be
paired. Pairing mode lasts for 3 minutes, after this
period A1 returns to standby mode.
Note : A1 can be paired with up to 3 devices. To
delete all pairing information, long click MFB while
A1 is in pairin
g
mode.
Pairing
Successful
&
Connection
State
From a Bluetooth phone or PC, search for sonorix
A1. When prompted for pinkey, enter ‘0000’ which
is the pinkey for A1. When paired, you will see
‘Pairing Success’ followed by display of
‘Connection States’ and ‘Battery Level Indicator.
If A1 was paired in upside down position (Car
Handsfree mode), car icon will be displayed and
likewise, if it was paired in upright position
(Speakerphone mode), then the sound icon will be
displayed.
Connection
State
In idle mode, short click volume up or volume
down buttons to check the connection status. If
Bluetooth icon is highlighted, it means A1 is in
connection state.
Reconnect
Function
A1 can be automatically reconnected to the last
connected device in 2 ways, that is, when car
starts to move after engine is started or when A1 is
powered on.
Note: Connecting time depends on the number of
phones paired with A1 as A1 takes turn to connect
to each device starting from the last connected
device.
When A1 is disconnected as a result of getting out
of Bluetooth range, it will attempt reconnection to
last connected device for maximum 5 minutes.
To cancel reconnect function, simply click MFB
when ‘Connecting…’ is displayed.
A1 can also be reconnected manually by long
clicking MFB in idle mode. You will first hear the
beep tone followed by display of
Connecting...’image.
Button Hold
Function
To prevent accidental button activation while the
device is being carried around, lock the button
operations by long clicking ‘MUTE/HOLD’ button.
To unlock, long click ‘MUTE/HOLD’ button.
Wait for Pairing
sonorix
A
1
00150E001A05
Pairing Success
Connecting…
9
9
Using A1 for Handsfree Operations
Function Action Display
Answer Call
On an incoming call, ‘Ringing’ and ‘Caller ID’ will
be displayed alternately. If Caller ID function is not
supported by phone, then only ‘Ringing…’ will be
displayed. If your phone supports Caller Name
Display, only the caller name will be displayed. To
answer call, short click MFB.
Make Call To make a call, first dial from phone and call will
be automatically transferred to A1.
Redial
To redial, short click MFB. For some phones, when
MFB is short clicked, it first displays the numbers
last called or received. In this case, short click
MFB again to redial. Note : Some phones allow
direct redial by short clicking MFB just once.
Voice Dial
To voice dial, make sure your phone supports
voice dialing function and that it is activated and
voice tags have been recorded. In idle mode, long
click MFB to initiate voice dial. Follow the rest of
the instructions from phone.
End Call
To end call first, short click MFB during ‘Talk
Mode’. If other party ends the call first, A1
automatically returns to handsfree standby mode.
After call is ended, talk time will also be displayed.
Reject Call To reject incoming call, long click MFB.
Volume
Control
Short click (+) or (-) to adjust volume. To adjust
volume in continuous increments, click and hold
(+) or (-) button.
Microphone
Mute
For privacy reasons, if you don’t want the party on
the other line to hear your voice, you can mute the
microphone by short clicking MUTE/HOLD button
during talk mode. To cancel mute function, short
click MUTE/HOLD button.
Call
Transfer During talk mode, to transfer call from A1 to phone
or vice versa, long click MUTE/HOLD button.
HOME
Ringing…
0315966400
Call Transfe
r
Redialing…
Call Ended
V
oice Dialing…
05:30
Mic. Muted
Call Rejected
Call Transfe
r
10
Function Action Display
3 Way Call
During talk mode, if you receive another call, long
click MFB to hold the 1st call and answer 2nd call.
To toggle between calls, long click MFB. During
talk mode, by short clicking MFB, you can end the
current call to continue with the next call.
Note : 3 Way Call function is only applicable if user
has subscribed for such service.
Call Waited
11
11
Audio Tuning A1 with My Cell Phone
z As mobile phones have varying speaker and microphone level settings which
affect the handsfree quality in the form of echoes, too low or loud sounds etc.
when used with A1, if you encounter such problems, you can calibrate the
speaker and microphone settings of your A1 device.
z To be able to adjust the microphone setting, A1 has to be in talk mode.
During talk mode long click [+] or [-] button. Followed by a beep tone, the
following icon will then be displayed. Short click [+] or [-] button to adjust your
microphone setting until the caller on the other side hears your voice well.
When display is turned off after 10 seconds or if call is ended, the desired
microphone setting will be saved.
12
Specifications
Standards Bluetooth Specification V2.0
RF Frequency Range 2402 ~ 2480 MHz
Profiles Supported Headset, Handsfree
Transmission Power 0.25 ~ 2.5mW (Class 2)
Distance 10m (in open space)
Audio Output > 1W
Battery Life Standby > 400 hrs
Continuous Talk Time > 15 hrs
Charging Time < 3 hrs
Charging Voltage DC +5V
Buttons Power On/Off, Multi-Function Button,
Mute Button, Volume Up/Down
Display 128 X 32 dots OLED (white)
Weight 87.5g (Include Sun Visor Clip)
Operating Temp. & Humidity -10 ~ +50°C, Rel. Humidity 0 ~ 95%
Certification BQB, FCC, CE, MIC
13
13
Product Warranty
* OpenBrain Technologies warrants this
product against all defects in material
and workmanship for a period of one
year from the date of purchase by end
user. The conditions for warranty are
as follows :
* The warranty is valid only if the original
receipt issued to the original purchaser
by the dealer is presented with the
product to be repaired or replaced.
* The warranty is void if the serial
number, date of purchase and product
label had been removed.
* The warranty does not cover any
failure or damage of the product due to
normal wear and tear, physical abuse,
improper installation, misuse,
modification or repairs by unauthorized
third parties.
* OpenBrain Technologies does not
assume responsibility for any loss or
damage incurred during shipment and
as a result of force majeure.
* OpenBrain Technologies is not liable
for any incidental or consequential
damages arising from the use or
misuse of the product.
* All warranty claims are limited to repair
or replacement of the defective
product at the sole discretion of
OpenBrain Technologies.
* If OpenBrain Technologies repairs or
replaces the product, the repaired or
replaced product shall be warranted
for the remaining time of the original
warranty period. Repair or
replacement may involve the use of
functionally equivalent reconditioned
units. Replaced part or product
becomes the property of OpenBrain
Technologi es.
* Consumable components, such as
batteries, are not included in the
warranty obligation.
Disclaimer Notice
The manufacturer shall not be liable for errors
contained herein or for incidental or
consequential damages in connection with
the furnishing, performance or use of this
material. This document contains proprietary
information, which is protected by
international patent applications and
copyright. All rights reserved. No part of this
document may be copied, reproduced or
translated without prior written consent of the
manufacturer. The manufacturer reserves the
right to revise this publication and to make
changes from time to time in the contents
hereof without obligation to notify any person
of such revisions or changes. The
manufacturer also reserves the right to
change the specifications without notice.
European CE notice to users and product
statements
This product is CE marked according to the
provisions of the R & TTE Directive
(99/5/EC). Hereby, OPENBRAIN
Technologies Co., Ltd, declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC. For further information,
please contact http://www.openbrain.co.kr
WEEE Directive 2002/96/EC Art. 11(2)
The use of the symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
FCC notice to users and product
statements
THIS DEVICE COMPLIES WITH PART 15
OF THE FCC RULES. Operation is subject to
the following two conditions; (1) this device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation. CAUTION:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.