OPENERS MRW-6030 MultiMedia Card Writer User Manual

OPENERS Co., Ltd. MultiMedia Card Writer

User Manual

MRW-6030 Manual (Ver 0.0.1)
Specification
USB Controller : GDS30C6001 (HYUNDAI)
File Downloading Speed : 130Kbytes/sec
Dimension : 68.9mm(W) X 37.1mm(H) X 15.3mm(D)
Unit Contents
Designations
INFORMATION TO THE USER (Part 15, Section 15.105(b))
INFORMATION TO THE USER
Τηισ εθυιπµεντ ηασ βεεν τεστεδ ανδ φουνδ το χοµπλψ ωιτη τηε λιµιτσ φορ α Χλασσ Β διγιταλ
δεϖιχε, πυρσυαντ το παρτ 15 οφ τηε ΦΧΧ Ρυλεσ. Τηεσε λιµιτσ αρε δεσιγνεδ το προϖιδε
ρεασοναβλε προτεχτιον αγαινστ ηαρµφυλ ιντερφερενχε ιν α ρεσιδεντιαλ ινσταλλατιον. Τηισ
εθυιπµεντ γενερατεσ, υσεσ ανδ χαν ραδιατε ραδιο φρεθυενχψ ενεργψ ανδ, ιφ νοτ ινσταλλεδ ανδ
υσεδ ιν αχχορδανχε ωιτη τηε ινστρυχτιονσ, µαψ χαυσε ηαρµφυλ ιντερφερενχε το ραδιο
χοµµυνιχατιονσ. Ηοωεϖερ, τηερε ισ νο γυαραντεε τηατ ιντερφερενχε ωιλλ νοτ οχχυρ ιν α
παρτιχυλαρ ινσταλλατιον. Ιφ τηισ εθυιπµεντ δοεσ χαυσε ηαρµφυλ ιντερφερενχε το ραδιο ορ
τελεϖισιον ρεχεπτιον, ωηιχη χαν βε δετερµινεδ βψ τυρνινγ τηε εθυιπµεντ οφφ ανδ ον, τηε υσερ
ισ ενχουραγεδ το τρψ το χορρεχτ τηε ιντερφερενχε βψ ονε µορε οφ τηε φολλοωινγ µεασυρεσ:
Ρεοριεντ ορ ρελοχατε τηε ρεχειϖινγ αντεννα.
Ινχρεασε τηε σεπαρατιον βετωεεν τηε εθυιπµεντ ανδ ρεχειϖερ.
Χοννεχτ τηε εθυιπµεντ ιντο αν ουτλετ ον α χιρχυιτ διφφερεντ φροµ τηατ το ωηιχη
τηε ρεχειϖερ ισ χοννεχτεδ.
Χονσυλτ τηε δεαλερ ορ αν εξπεριενχεδ ραδιο/Τς τεχηνιχιαν φορ ηελπ.
WARNING (Part 15, Section 15.21)
Χηανγεσ ορ µοδιφιχατιονσ νοτ εξπρεσσλψ αππροϖεδ βψ τηε παρτψ ρεσπονσιβλε φορ
χοµπλιανχε χουλδ ϖοιδ τηε υσερ’σ αυτηοριτψ το οπερατε τηε εθυιπµεντ.
Connecting to PC (Writer connection method)
1) Connect MMC Writer to the USB port.
2) Moment after, a message is shown to say that it found device. Here, click the “Next>” to begin
driver installation.
3) Select ‘the search for driver that is appropriate to the device(recommend)’ and click “Next>”
button.
4) This is a window to designate the driver location.
- After checking as shown in the picture, click the “ (R)” button to designate the location and
click the “Confirm” button.
- After designating the path, click on the “Confirm” button.
- The next picture is the window of after designating of location. Click the “Next>” button.
5) When the “Next>” button is clicked, driver installation begins.
6) After the installation, the following device name appears.
When clicking the “Complete” button, the drive installation is completed.
Program Installation
1) Execute Setup.exe.
2) Press the "Next (N)>" button.
3) After selecting "I accept the terms in the license agreement”, press the "Next>" button.
4) This is a window to designate the folder to be installed.
Press the "Change" button only when changing the folder, after change the folder and press the
"Next>" button. And when not changing, press the "Next>" button to go to the next.
5) Message to begin “Install” appears.
When pressing the "Install" button, the installation begins.
6) When installation is completed, press the "Finish" button to complete the installation.
Program Use Method
When program is executed, the following picture appears.
After inserting the MMC card into Writer, press No.2 button.
- Download (File copy from PC to MMC)
1) Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell].
*Click No.2 button when executing the program.
2) Insert MMC card into Writer.
3) After selecting the desired file, press " " button.
- Upload (File copy from MMC to PC)
<Upload function is not supported only when the expanding is MP3>
1)Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell].
*Click No.2 button when executing the program.
2) Insert MMC into Writer.
3) After selecting the desired file, press "  " button.
- Delete the file from MMC card
1) Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell].
*Click No.2 button when executing the program.
2) Insert MMC card into Writer.
3) After selecting the desired file, press " X " button.
- MMC Card Format
1) Set-Shell is executed at [Begin]-[Program (P)]-[cowon]-[Jet-Shell].
*Click No.2 button when executing the program.
2) Insert MMC into Writer.
3) Select "File"-"Format Flash Memory Card " from Menu.
4) When talk box is shown, press the "Start" button.
5) When work is complete, press the "Close" button.

Navigation menu