OPPO Mobile Telecommunications B002 Bluetooth Remote User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2425356
Application ID	XuSuMfgiGMU8on78SCoKgw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	95.48kB (1193500 bits)
Date Submitted	2014-10-23 00:00:00
Date Available	2014-10-23 00:00:00
Creation Date	2014-10-20 19:10:27
Producing Software	Adobe PDF library 10.01
Document Lastmod	2014-10-22 16:07:48
Document Title	打印
Document Creator	Adobe Illustrator CS6 (Windows)

Bluetooth Remote Control User Guide
Version 0.1
The "Bluetooth Remote Control"needs to be paired with your phone before use. Please follow the
procedure shown below to set up a connection to the Bluetooth Remote Control:
1. Ensure that Bluetooth is turned on;
2. Tap the button at the center of the "Bluetooth Remote Control"
3. Open the "Bluetooth Remote Control"app on your phone.The first time you use the App, it will prompt
you to perform a search and to connect to the device. Tap the"Disconnected"button on the main screen
to bring up the Search for Device screen and connect to the Bluetooth Remote Control. If your
connection is dropped, please follow the on-screen prompts.
4. Your phone will automatically connect to the Bluetooth Remote Control once it finds it. Please be
patient and give it a few seconds;
5. An on-screen prompt will appear after a successful connection is made.
The "Bluetooth Remote Control" offers the following functions:
Remote control your phone - Music: Play/Pause; Previous track/Next track; Lower volume/Increase
volume(a single click adjusts volume by one increment; long press adjusts volume continuously);
Camera: Activate camera; Rotate camera forward/backward (a single click rotates camera by a given
angle,long press rotates camera continuously; Rapid switching between front/rear camera; Shoot);
Find my phone - Double click the Bluetooth Remote Control will trigger your phone to ring;
Disconnect alert - your phone will ring when it is disconnected from the Bluetooth Remote Control;
Message notification - the Bluetooth Remote Control will flash when there is an incoming call or a
message.
Settings: this includes user guide, firmware upgrade, help and about.
During Bluetooth connection please note
Make sure the two devices are placed within the Bluetooth maximum range (5 meters);
Make sure there are no obstacles between the two devices, e.g. human bodies, walls, corners or
railings.
Safety information
Please read carefully and follow all safety instructions before use to prevent injuries, fires, or explosions.
Note
Using a battery of an unsuitable model may cause explosion. Used batteries must be disposed of
as instructed.
Batteries must not be exposed to direct sun light, fire, or any similar hot environment
Warning
Please use batteries, chargers, accessories, and appliances that are approved by the manufacturer
Do not subject your device to physical impact or damage
Do not place the device in any overly hot or overly cold environment. The recommended working
temperature range is 0°C to 35°
Do not place the device inside or near heaters, microwave ovens, cooking appliances or high pressure
containers
Do not use the device outdoors during thunderstorms
Please follow all safety warnings and regulations concerning device-usage while driving
Should any crack, breakage, or overheating occur, please stop using the device immediately and
contact OPPO customer service
Do not let children or animals chew on or swallow the device
Do not use the device to poke eyes, ears, or any other part of a body, and do not place in mouth.
Do not place the device near human or animal eyes if the device has a flashing light or indicator
light on it
If you have a cardiac pacemaker, please use the device on the side opposite to your pacemaker in
order to minimize interference
Should you need to use any medical equipment, please contact the manufacturer of the medical
equipment before use to confirm whether the radio frequency emitted by the device will interfere
with the medical equipment
The radio frequency emitted by the device may interfere with certain types of hearing-aids and cochlear
implants. Please contact the manufacturer of such a product before using our device to confirm whether
the radio frequency emitted by our device will interfere with their product.
Note
Do not disassemble, modify, or repair the device.
Any change or modification made to the device will void the manufacturer's warranty If the device
needs repairing, send it to OPPO customer service.
Do not disassemble or pierce batteries as this may cause explosion or fire.
Do not paint the device or cover the device with adhesive paper.
Paint and adhesive paper can cause blockage and hinder the device from working properly.
If you are allergic to the paint or metals used in this device, you may experience itchy skin, eczema,
or skin swellings as a result. Should any of the aforementioned conditions arise, stop using the
device and consult a doctor.
Only allow qualified professionals to carry out repairs on the device. Repairs carried out by an
unqualified person may cause damage to the device and can void your warranty.
Water and Dust
If water or dust enters device, it may cause damage to the device. Strictly follow the instructions in
order to prevent damage to the device and to keep the device water-proof and dust-proof.
Do not submerge the device under water over 1 meter deep for more than 30 minutes.
Do not expose the device to high-pressure water such as waves or waterfalls.
If the device or your hand is damp, dry your device or your hand before using the device.
Do not subject your device to saline water, ionized water, or soapy water.
Resistance to water and dust may be impaired if the device is dropped on hard surface or otherwise
impacted.
If the device becomes wet, dry it with a clean, soft cloth.
Your device has been tested in controlled environments, and has demonstrated water-resistance in given
environments (conforms to international standards IEC 60529 - the protection level provided by the seal
[defense grade] meets the requirements of type IP67); test conditions: 15°C - 35°C, 86 – 106 kPa, 1m,
30 minutes continuously). Although the device has met these requirements, this does not mean your
device is water-proof under any condition.
Due to the used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher. The connection to so called power USB is prohibited.
The suitable temperature for the product and accessories is -10℃-50℃.
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS
Hereby, GUANGDONG OPPO MOBILE TELECOMMUNICATIONS CORP.,LTD declares that this device is in
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two onditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications or changes to this equipment. Such modifications or changes could void the user’s
authority to operate the equipment .
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct theinterference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Warranty description
Dear user, thank you for using our product. In case of any damage that is not due to human error, warranty
service is available for a period of one year beginning from the original purchase date:The warranty
covers: refund within 7 days, replacement within 1month, and repair within 6 months.
To protect your legal interests, please read the following notes carefully:
(1) The warranty card must be stamped by the distributor to become valid.
(2) Consumers should retain their warranty card. The warranty card will not be re-issued if lost, and will be
voided if altered.
(3) In case of any damage of the product that is not due to human error, consumers are entitled to repairs
at authorized service points free of charge within the warranty period. Before receiving such warranty
service, customers are required to furnish the warranty card as well as their receipt of purchase, which
includes the product ID.
The warranty is not applicable in the following cases that arise during product usage
(1) Damages caused by accidental drops or by water immersion in a manner that does not conform to
the stipulated instructions.
(2) Damages caused by human errors such as unauthorized disassembly, modification, etc.
(3) Damages caused by usage in environments not conforming to product specifications.
(4) Damages caused by force majeure (e.g. fires, earthquakes, and lightning).
(5) Damages caused by improper usage that does not conform to the user guide or operation manual.
(6) The serial number shown on the warranty card does not match that on the product, or the warranty
card has been altered.
(7) SN barcode or seal tape of the product is missing, damaged, or blurred beyond recognition.
A product that is repairable but not covered by our free repair service may be repaired for a
service fee.
OPPO Warranty Card (For Consumers)
Consumer information (to be filled out by the consumer):
Name: ________________
Postcode: ______________
Address: ________________________________
Tel (with area code):
________________________________
Product Information: ________________________________
(Product model/Color/SNcode/Other Information): ____________________
Retailer Information: ________________________________
Retailer Name (with stamp): ________________________________
Retailer Tel (with area code): ________________________________
Retailer address: ________________________________
Purchase Date:
_____ Year _______ Month _____ Day
Receipt number: ________________________________
OPPO Warranty Card (For Consumers)
Consumer information (to be filled out by the consumer):
Name: ________________
Postcode: ______________
Address: ________________________________
Tel (with area code):
________________________________
Product Information: ________________________________
(Product model/Color/SNcode/Other Information): ____________________
Retailer Information: ________________________________
Retailer Name (with stamp): ________________________________
Retailer Tel (with area code): ________________________________
Retailer address: ________________________________
Purchase Date:
_____ Year _______ Month _____ Day
Receipt number: ________________________________
OPPO Warranty Card (For Consumers)
Consumer information (to be filled out by the consumer):
Name: ________________
Postcode: ______________
Address: ________________________________
Tel (with area code):
________________________________
Product Information: ________________________________
(Product model/Color/SNcode/Other Information): ____________________
Retailer Information: ________________________________
Retailer Name (with stamp): ________________________________
Retailer Tel (with area code): ________________________________
Retailer address: ________________________________
Purchase Date:
_____ Year _______ Month _____ Day
Receipt number: ________________________________
V0.0.1
5 19 8 0 0 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : 打印
Metadata Date                   : 2014:10:22 16:07:48+08:00
Modify Date                     : 2014:10:22 16:07:48+08:00
Create Date                     : 2014:10:20 19:10:27+08:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 108
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 7443 bytes, use -b option to extract)
Instance ID                     : uuid:c4e32093-31e7-45a9-9b94-7084500b86c4
Document ID                     : xmp.did:45F530CDF257E411B24B9574317F84EA
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:2304d5ad-13c6-af41-8646-360ef867abec
Derived From Document ID        : xmp.did:0980117407206811822A897E387FE54C
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved
History Instance ID             : xmp.iid:45F530CDF257E411B24B9574317F84EA
History When                    : 2014:10:20 19:10:29+08:00
History Software Agent          : Adobe Illustrator CS6 (Windows)
History Changed                 : /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 70.001584
Max Page Size H                 : 45.998570
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, Calibri, MyriadPro-Regular, MyriadPro-Bold, AdobeSongStd-Light
Font Family                     : Arial, Arial, Calibri, Myriad Pro, Myriad Pro, Adobe 宋体 Std
Font Face                       : Regular, Bold, Regular, Regular, Bold, L
Font Type                       : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.10, Version 5.08, Version 5.62, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 5.016;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168
Font Composite                  : False, False, False, False, False, False
Font File Name                  : arial_1.ttf, arialbd_0.ttf, calibri.ttf, MyriadPro-Regular_2.otf, MyriadPro-Bold.otf, AdobeSongStd-Light.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Group Name        : 明亮
Swatch Groups Group Type        : 1
Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Cyan    : 60.000002
Swatch Groups Colorants Magenta : 90.000004
Swatch Groups Colorants Yellow  : 0.003099
Swatch Groups Colorants Black   : 0.003099
Producer                        : Adobe PDF library 10.01
Page Count                      : 14
Creator                         : Adobe Illustrator CS6 (Windows)

EXIF Metadata provided by EXIF.tools