OPTOELECTRONICS H1311BTH Wireless Handheld Terminal User Manual manual

OPTOELECTRONICS Co., Ltd. Wireless Handheld Terminal manual

manual

Master Specification Handy Terminal Product name H-1311-BTH Specification No. SS08xxx Edition Initial release Date of publication T.B.D Original Doc. No. SS08062 Optoelectronics Co., Ltd. 4-12-17 Tsukagoshi Warabi-shi, Saitama 335-0002 Japan TEL: +81 (0) 48-446-1183 FAX: +81 (0) 48-446-1184
H-1311-BTH SS08xxx Revision History Specification No.: SS08xxx Product Name: H-1311-BTH Revision Date Section Description of Changes Initial T.B.D - -
H-1311-BTH SS08xxx Table of Contents 1. Abstract .............................................................................................................................1 2. Overview ...........................................................................................................................1 3. Basic Specifications...........................................................................................................2 4. Detailed View ....................................................................................................................5 5. Optical Specifications ........................................................................................................6 6. Technical Specifications ....................................................................................................7 7. Application Development Environment............................................................................ 11 8. Symbology ......................................................................................................................14 9. Bluetooth Specifications .................................................................................................. 15 10. Serial Label....................................................................................................................16 11. Packaging Specifications...............................................................................................16 12. Environmental Specifications......................................................................................... 17 13. Reliability.......................................................................................................................18 14. Repair and Maintenance ...............................................................................................18 15. Regulatory Compliance ................................................................................................. 19 16. RoHS.............................................................................................................................20 17. Precautions ...................................................................................................................21 Appendix. Mechanical Drawings .........................................................................................23
H-1311-BTH SS08xxx 1 1. Abstract This document provides specifications for the H-1311-BTH, a handy terminal with built-in laser scanner (hereinafter “the handy terminal”) . 2. Overview • The H-1311-BTH is a barcode handy terminal which contains a compact laser scanner. • Collected data by each key operation, various setting data and add location data such as clock information can be stored in a built-in memory. • The dedicate optical communication unit is able to send the stored data to devices such as host computer through IrDA • AA alkaline batteries and the dedicated lithium-ion battery are useable for main power supply. 2.1. Model Name, Type Model Name: H-1311-BTH (Body: light grey, laser emitting angle: 60°) 2.2. Features • Light weight and compact design • Large-capacity memory (RAM: 16MB) can hold vast amount of master data and collected data. • IrDA FiR(max.4Mbps) provides high-speed update and download. • The used Bluetooth is compliant with ver.1.2 and SPP profile is installed. • Easy use with one hand • Shock resistant up to 1.5 m with enhanced dust- and drip-proofing that satisfies IP54 requirements. • This product is compliant with RoHS. (However, this document does not have any legal weight in the European Union)
H-1311-BTH SS08xxx 2 3. Basic Specifications Items Specifications Remarks CPU 32bits RISC CPU FROM 4Mbyte For OS/AP Memory RAM 16Mbyte(user area: 14Mbyte) For: • Work area for OS/AP • User’s data OS μITRON Display element FSTN semi-transmissive LCD Font size 12/16/24 dot Font When in 12 dot Font mode (digit × row) Reduced-size ANK: 21×21 Half-size character: 21×10 Kanji character: 10×10 When in 16 dot Font mode (digit × row) Reduced-size ANK: 16×16 Half-size character: 16×8 Kanji character: 8×8 Structure of Characters When in 24dot Font mode (digit × row) Reduced-size ANK: 10×10 Half-size character: 10×5 Kanji character: 5×5 Number of dots (W)128× (L)128 dots Size of dots (W)0.24mm ×(L)0.24mm Pitch angle of Dots (W)0.02mm ×(L)0.02mm Type of characters JIS Standard No.1 and 2, ANK Back light White LED Display section Contrast adjustment Possible Operating section Key type (Operation keys) 22keys : 10keys, Trigger, BS, Shift, CLR, ENT, PW, Q1, Q2, Function×3 Indication LED One dual color LED(red×green) Vibration Vibrating motor *Vibration time may vary. Buzzer Adjustable volume/tone Specification Compliant with ver.1.2 HCI module, produced by Kyocera Installed profile SPP Stack, produced by iAnywhere Frequency 2402MHz to 2480 MHz Output level Class 2 Communication range 10m It may be shorter than 10m depending on the use environment. Bluetooth Baud rate 115.2kbps
H-1311-BTH SS08xxx 3 Antenna 1/4λ (surface mounted) Infrared communication Compliant with IrDA 1.2 *Speed (SiR): 9600～115.2k(BPS) (FiR): 4Mbps Note: These are theoretical figures and were not actually measured. RTC(clock) Available YY/MM/DD/HH/MM/SS (Accurate Within 90 Seconds per Month) Main Battery Lithium-ion Battery (3.7V 1100mAh) AA alkaline battery×2 Backup Battery Coin-type lithium-ion secondary battery (18mAh) For RAM / RTC back up Up-time (*1) Lithium-ion Battery: rs AA alkaline battery: hrs Bar Code Scanning: Twice in 10 seconds (Electrical cooperation mode B) Power Supply Section Data holding time (*2) 7days or longer Back up for RAM / clock Light-emitting element Red-visible light semiconductor laser Laser wave length / output 650±10nm, lower than 1mW, 25°C Scanning frequency 100±20scan/sec Minimum resolution 0.127mm Scanning distance 55 to 520mm Resolution:1.0mm PCS: 0.9Scanner section Symbologies JAN, EAN, UPC-A, UPC-E, NW-7(Codabar), Industrial 2of5, Interleaved 2of5, Code 11, Code 39, Code 93, Code 128, MSI/Plessey, UK/Plessey, IATA, Telepen, Matrix 2of5, S Code, Tri-Optic, Chinese Post Matrix 2of5, EAN 128, RSS-14, RSS Limited, RSS Expanded, PDF417, MicroPDF417 *Please refer to the section 8 for further information. Developmental environment C language Application development environment Operation -10°C to 50°C Temperature Storage -20°C to 60°C Operation 20%RH to 85%RH No condensation, no frost Humidity Storage 20%RH to 85%RH No condensation, no frost Charging temperature 0 to 40°C Frequency 3 cycles (6 sides considered as one cycle) Height 150cm Drop test (*3) Floor Concrete Environmental condition Water and drip proof Compliant with JIS IP-54 Dimensions 159.0 × 52.8 × 30.5mm Weight Approximately 180g (including AA alkaline battery) Hand strap×1 AA alkaline battery×2 Accessory Users manual×1
H-1311-BTH SS08xxx 4 *1 Operation time - When main battery is new and fully charged at room temperature. *2 Data holding time - Time for holding RAM ad clock data when main battery is not supplied and backup battery is new and fully charged. *3 Shock resistance - Conditions of the shock resistance test are: • Does not count scratches or whitening on a surface as a malfunction. • Shock resistance is approved when no malfunction occurs after the test. • Shock resistance is approved if the battery cover is not unhooked after the test
H-1311-BTH SS08xxx 5 4. Detailed View Figure1: Detailed view No. Items Specifications 1 LED Indicates operational status such as scanning and communication. It is able to be controlled by user’s programs. 2 LCD Indicates scanned barcodes and operational items 3 Up / Down keys Used when selecting items from a menu. Can be programmed by users to set certain functions. 4 Trigger key Press when scanning barcodes 5 SHIFT Used to switch between numerical and letter entry modes 6 BS Deletes the previous character 7 CLR Cancels input 8 Operational keys(10) Used for numerical, “ENTER”, decimal point input. 9 F1, F2, F3 Keys that can be programmed by users 10 Power key Used to put the product ON/OFF 11 IrDA For infrared communication 12 Speaker 13 Hand strap hole Hole for attaching a hand strap 14 Scanning window Laser that reads barcodes is emitted from this opening. 15 Battery cover Remove when replacing the rechargeable battery 16 Battery cover lock Used to lock / open the battery cover 17 Electrical contacts Used to charge the terminal’s battery, when the terminal is placed in the dedicated cradle.
H-1311-BTH SS08xxx 6 5. Optical Specifications 5.1. Laser Scanning Specifications Item Characteristics Unit Light-emitting Element Red laser diode Emission Wavelength 650 ± 10 (25°C) nm Light Output < 1.0 mW Scanning Method Bi-directional scanning method Scanning Speed 100±20 Scan/Sec Scan angle 54±5 ° Scan angle Read angle 44(min) ° 5.2. Laser Scanning Standard 5.2.1. Laser Scanning Tilt Vertical differences between both ends of a laser scan line *Up to 1.2° in vertical direction from the scan origin (MM mirror). *Up to 3.1 mm at 150 mm from the scan origin. 5.2.2. Scanning Curvature The maximum differences between the laser scan line and the line between both ends of the laser scan line. *Up to 1.27 degrees in vertical direction from the scan origin (mm mirror). *Up to 3.3 mm at 150 mm from the scan origin. Measure it in the middle of the laser scan line. Figure2: Scanning curvature
H-1311-BTH SS08xxx 7 6. Technical Specifications 6.1. Depth of Field Figure3: PCS Except as otherwise noted in each section, technical specification conditions are as follows: Conditions: Ambient temperature and humidity ：room temperature, room humidity Ambient immunity ：500 to 900 lx Background of barcode ：black Decoding test ：Approve the performance when decoding is successful in all ten tests. (Decoding is deemed successful when completed in 0.5 seconds or less.) 6.2. Print Contrast Signal 0.45 or higher (over 70% of reflectivity of space and quiet zone). PCS=Reflectance of white bar－Reflectance of black bar Reflectance of white bar Scanning performance may decline if dirt or scratches mar the optical window. Keep the optical window clean.
H-1311-BTH SS08xxx 8 6.3. Scan Area and Resolution The depth of field is measured from the edge of the scanner. The scanning range is within the circular arc centered on the scan origin. Figure4: Scan field Resolution Depth of Field Symbology PCS Quiet Zone Digit 1.0mm 55 to 520 Code 39 0.9 25mm 1 0.5mm 35 to 350 Code 39 0.9 18mm 3 0.25mm 35 to 200 Code 39 0.9 10mm 8 0.15mm 35 to 100 Code 39 0.9 7mm 10 0.127mm 45 to 80 Code 39 0.9 5mm 4 Conditions: Barcode OPTOELECTRONICS Test Sample, NW ratio = 1:2.5 Angle Pitch: α = 0° Skew: β = +15° Tilt: γ = 0° Curvature R = ∞ In millimeters Resolution
H-1311-BTH SS08xxx 9 6.4. Pitch, Skew and Tilt Items Specifications Pitch α = ±35° Skew β = ±50°(excluding dead zone) Dead Zone(DZ) β = ± 8° (there are some areas in which decoding fails due to specular reflection)Tilt γ = ±20° Conditions: OPTOELECTRONICS Test Sample Pitch Skew Dead zone PCS = 0.9 Resolution = 0.25mm 9-digit Code 39 Quiet zone = 10mm NW ratio 1:2.5 Barcode Tilt PCS = 0.9 Resolution = 0.26mm 13-digit JAN Quiet zone = 10mm Distance 90mm from the edge of the data collector Pitch Skew: β = +15° Tilt: γ = 0° Tilt Pitch: α = 0° Skew: β = +15° Angle Skew Dead zone Pitch: α = 0° Tilt: γ = 0° Curvature R = ∞ Figure5: Pitch angle
H-1311-BTH SS08xxx 10 H-1311H-1311H-13H-13 Figure6: Skew angle Figure7: Tilt angle 6.5.Curvature Items Specifications 8-digit JAN decoding performance is guaranteed when R≥15 mm. 13-digit JAN decoding performance is guaranteed when R≥20 mm. Conditions: Barcode OPTOELECTRONICS Test Sample PCS = 0.9 Resolution = 0.26mm Quiet zone = 10mm Distance 90mm from the edge of the data collector Angle Skew β = +15°
H-1311-BTH SS08xxx 11 Figure8: Curvature 6.6. Ambient Light Immunity Incandescent light 4000 lxFluorescent light 4000 lx (except high frequency fluorescent light) Sunlight 80000 lx Items Conditions Barcode OPTOELECTRONICS Test Sample PCS = 0.9 Resolution = 0.25mm 9-digit Code 39 Quiet zone = 10mm NW ratio 1:2.5 Distance 130mm from the edge of the data collector Angle α = 0° β = 15° γ = 0° Curvature R = ∞ Measurement location Specular reflection should be avoided. 7. Application Development Environment This chapter will explain the optional development environment to develop business-orientated applications. The language for the development is C language. <Contents of the development> • Application development guide • Application development environment • System menu specification manual • Library specification manual • Compiler(*) *Produced by IAR Part name: Embedded Workbench (abbr.: EWARM)
H-1311-BTH SS08xxx 12 7.1. System Menu This is the system menu for user application download and the settings for the handy terminal. To start the system menu, hold down the “Q1” and ”Q2” keys when turn the power ON. (*1) Main menu Sub menu Function Restart Closes the system menu Download Used for the application download. When it is completed successfully, application is started. Upload Used for the application download. Contrast setting Adjusts the contrast of LCD Date setting Sets the system date Click tone setting Sets click tone Terminal ID setting Used for the terminal ID setting and confirmation Resume setting Sets enable / disable resume Auto-power down setting Sets the duration for auto-power down Back light setting Sets to put on/off the back light of display Battery power indication Indicates the battery power status Cradle protocol setting Sets availability of protocol when communicating with the cradle Terminal settings Initialization setting Initializes all settings to the factory mode Display Tests the display Key Tests the keyboard Memory Memory check Buzzer Tests the buzzer tone LED Tests the LED Back light Tests the back light Vibrator Tests the vibrator RTC Tests the system date Battery Checks the voltage of main/sub batteries Scanner Tests the scanner Terminal test Bluetooth Tests if data transmission/reception is successfully done. File list Disk A: Indicates the file lists in the RAM disk. Version info. Indicates version information of OS, BOOT, etc. *1 When user application is not available, system menu is activated by power ON.
H-1311-BTH SS08xxx 13 Figure 9: System menu display *Please refer to the library specification manual for your further information. 7.2. Battery power indication The power of battery will be indicated the bottom right of the display as shown in the figure below. Battery power is indicated with either of the steps shown below. Figure 10: Battery power indication *Whether the battery power indication is set or not, the “Step 4” mark will appear on the display when the battery power has ran out. In that case, please replace a new battery immediately. System Menu > Restart Download Upload Terminal setting Terminal test File list Version information Step1: Step2: Step3: Step4:
H-1311-BTH SS08xxx 14 8. Symbology For various business use, symbologies can be set by each application. Symbologies shown below are available for scanning. *Please refer to the library specification manual for your further information. Symbologies Symbologies 13-digits JAN Interleaved 2of5 13-digit JAN + 2-digit ADDON Code 93 13-digit JAN + 5-digit ADDON Code 128 8-digit JAN MSI/Plessey 8-digit JAN + 2-digit ADDON IATA 8-digit JAN + 5-digit ADDON UK/Plessey 13-digit EAN Telepen 13-digit EAN + 2-digit ADDON Matrix2of5 13-digit EAN + 5-digit ADDON ChinesePostMatrix 2of5 8-digit EAN NW-7 ABC Code 8-digit EAN + 2-digit ADDON NW-7 CX Code 8-digit EAN + 5-digit ADDON S-Code 13-digit Instore Code Tri/Optic 8-digit Instore Code Code 39 Full Ascii UPC-A Code 39 It.Pharmaceutical UPC-A + 2-digit ADDON EAN 128 UPC-A + 5-digit ADDON RSS-14 UPC-E RSS Limited UPC-E + 2-digit ADDON RSS Expanded UPC-E + 5-digit ADDON PDF417 UPC-E1 MicroPDF417 UPC-E1 + 2-digit ADDON Code 11 UPC-E1 + 5-digit ADDON Korean Post Code 39 NW-7(Codabar) Industrial 2of5
H-1311-BTH SS08xxx 15 9. Bluetooth Specifications Bluetooth is used as an interface for the H-1311-BTH. It is compliant with ver1.2 and has SPP (Serial Port Profile). 9.1. Profile Installed • SPP (Serial Port Profile) 9.2. Supported Communication Type 1 to 1 (One data collector to one host system) 9.3. Operation Mode (When connected) Master mode 9.4. Security Mode Available (authentication) 9.5. Encryption Available
H-1311-BTH SS08xxx 16 10. Serial Label Figure 11: Serial label for H-1311-BTH 11. Packaging Specifications 11.1. Individual Packaging Specifications T.B.D 11.2. Collective Packaging Specifications T.B.D
H-1311-BTH SS08xxx 17 12. Environmental Specifications 12.1. Operation Temperature and Humidity -10°C to 50°C (except when charging) 20 to 85% RH (No condensation, no frost) 12.2 Storage Temperature and Humidity -20°C to 60°C 20 to 85% RH (No condensation, no frost) 12.3. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light 4000 lxFluorescent light 4000 lx (except high frequency fluorescent light)Sunlight 80000 lx 12.4. Dust and Drip Proof IEC: IP54 12.5. Vibration Strength No malfunction occurred after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz with accelerated velocity 19.6 m/s2 (2.0G) for 60 minutes in non-operating state. Repeat this routine in each X, Y, Z direction once for 60 minutes each. 12.6. Vibration Strength (with individual packaging) No malfunction occurred after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz with accelerated velocity 19.6 m/s2 (2.0 G) for 60 minutes in individually packaged state. Repeat this routine in each X, Y, Z direction once for 60 minutes each. 12.7. Drop Test No malfunction occurred after the following test. Drop Test: Drop the scanner from 150cm above the concrete floor. (6 sides, 3 times each) 12.8. Drop Test (with individual packaging) No malfunction occurred after the following test. Drop Test: Drop an individually packaged scanner from a height of 150 cm onto a concrete floor once on its 1 corner, 3 edges and 6 sides. (10 drop tests in total.)
H-1311-BTH SS08xxx 18 12.9. Electrical Characteristics • Withstand Voltage: AC 1500 V/ per 60 seconds, 10mA or less • Insulation Resistance: DC 500 V, 2 MΩ or higher • Current Leakage: 250 μA or less / AC 250 V 60 Hz • Static Electricity Noise Immunity: No destruction found: ± 15kV (air or direct discharge) No malfunction found: ± 10kV (air or direct discharge), ± 6kV (contact, direct or indirect discharge) Note: Testing method complies with IEC-61000-4-2. (150pF/330Ω) 13. Reliability MTBF 10,000 hours 14. Repair and Maintenance 14.1. Waranty Period Optoelectronics Co., Ltd. (hereinafter referred to as “Optoelectronics”) warrants that this product is free of defects or malfunctions for a period of twelve (12) months from the end of the month it is shipped. In the case where defects or malfunctions of this product occur during foregoing warranty period, Optoelectronics provides repairs free of charge. Any repair or replacement of this product after the foregoing warranty period will be billable. If defects or malfunctions were caused by mishandlings of customers, the repair or replacement of this product will be billable even during the foregoing warranty period. 14.2. Delivery Maintenance and repair after the shipment of the product shall be done using send-back system (transport costs paid by the sender). 14.3. Time Frame of Repairing Products Repaired product will be shipped back to the customer within 20 days after its acceptance by Optoelectronics. However, the time needed for the repair of products with early failures need to be separately discussed with Optoelectronics. Also, if quicker repair is needed, it must be discussed with Optoelectronics in advance. 14.4. Maintenance Period The maintenance period of this product is 5 years after its shipment.However, if deemed difficult to continue the maintenance of the product before the end of the foregoing maintenance period, products for its replacement or means of its maintenance shall be discussed separately. 14.5. Others Any problems other than those described above shall be discussed separately.
H-1311-BTH SS08xxx 19 15. Regulatory Compliance 15.1. Laser Safety ・JIS C 6802:2005 Class 2 ・IEC60825-1+A2:2001 Class 2 ・CDRH Class 2 15.2. Product Safety ・IEC60950-1 ・EN60950-1 15.3. EMC ・EN55024 ・VCCI Class B ・FCC Part15 SubpartB Class B This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : ( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. ．FCC Radiation Exposure Statement This device complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. Please avoid direct contact to the transmitting antenna during transmitting. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
H-1311-BTH SS08xxx 20 ・FCC Part15 SubpartC 15.4. R&TTE ・EN300 328 ・EN301 489-1 ・EN301 489-17 15.5. Others ・Certification for Construction Design of Specified Radio Equipment ・Bluetooth logo certification 16. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC. Federal Communications Commission Notices This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment.
H-1311-BTH SS08xxx 21 17. Precautions 17.1. Precautions about the laser light Caution – Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ・Do not stare into the laser light from a scanning window. It may harm your eyes. ・Do not point the laser directly at others’ eyes. It may harm your eyes. ・Do not stare into the beam with optical instruments. It may harm your eyes. 17.2. Radio Low The data collector has obtained the Certification for Construction Design of Specified Radio Equipment. Therefore it does not need to have a radio station license in Japan. The following activities are prohibited under the Radio Law: • Remodeling and disassembly • Peeling off the certificate label Do NOT use the data collector under the following environment: *Otherwise radio interference may affect other device and end up with causing physical or material damage. • Safety apparatus and medical device for human body protection • Environment where is concerned to cause serious damage 17.3. Handling Do not deliberately cause this product any stress listed below (1) Shock: ・Do not drop from the non-standard height (2) Heat: ・Use outside specification temperature range. ・Do not pour boiling water on the data collector. ・Do not throw data collector into the fire. (3) Foreign material: ・Do not put into water. ・Do not put into chemicals. (4) Data Communication IrDA communication may not be done under an strong inverter fluorescent. Please be aware of the operational enviroment. (5) Others: ・Do not plug/unplug the connectors before diconnecting the power. ・Do not diassemble this product ・Do not use this product near a radio or a TV receiver, it may cause reception disorder. ・Do not use of this product in the environment with excessive static electricity, it may cause product malfunction. ・Scanning performance of this product under an inverter fluorescent lamp or CRT light is not guaranteed.
H-1311-BTH SS08xxx 22 17.4. Export Administration Regulations This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government. 17.5. Radio Communication • To start IrDA communication through the H-1311-BTH, the device used as a receiver is required followings; - to be compliant with the same version as H-1311-BTH - to have the same profile as H-1311-BTH • The connection with a recipient without preliminary test is not guaranteed. • Since the communication uses the 2.4 GHz, it may be interrupted by various devices using the same frequency bands. • This product (with national specification) should only be used in Japan. The use of the product outside Japan may be fined. • Baud rate and communication distance vary depending on obstructions between the devices, radio wave condition, and the receiver. 17.6. Frequency Band The frequency band 2.4 GHz is utilized by this scanner. Read carefully the followings before using this product. In the frequency band of this scanner, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this scanner. In case that radio interference occurs between this scanner and “other radio stations,” change the service space immediately, or stop transmitting radiowave to avoid the interference. If you have any questions or troubles, please contact our marketing group.
H-1311-BTH SS08xxx 23 Appendix. Mechanical Drawings H-1311-BTH Figure 14: Mechanical drawing of H-1311-BTH

Navigation menu