OPTOELECTRONICS OPR3101 Wireless Barcode Scanner User Manual UsesManual OPR31012007320
OPTOELECTRONICS Co., Ltd. Wireless Barcode Scanner UsesManual OPR31012007320
Contents
- 1. User manual 1
- 2. user manula 2
User manual 1
OPR-3101 Wireless 1D Scanner Simple Intruction manual OPTOELECTRONICS Co.,Ltd. 1. Package contents 1-1.OPR-3101 Scanner body <Accessory> ¾ Re-chargable battery pack 1-2.CRD-3101 Communicating cradle body <Accessory> ¾ AC adopter ¾ RS-232Ccable 1-3.CHG-3101 Charging cradle body <Accessory> ¾ AC adopter 2.Detailed view 2-1. OPR-3101(Scanner) ⑥ ③ ① ⑧ ② ⑨ ⑪ ⑦ ⑩ ④ OPR-3101 Detailed View Name 1. Window 2. Trigger switch 3. Indication Panel 4. Lock for Battery Lid 5. Terminal for charging 6. Hook 7. Charging terminal 8. Buzzer sound hole 9. Model name label 10. Serial number label 11. Laser caution label Function Through the laser output and receive catoptric light from Barcode. Scanning barcodes, connecting / disconnecting Bluetooth . Indicating how well the scanner reads, connection status of Bluetooth, operation mode, remaining battery and charging status. For setting/detaching the battery pack. Receiving electric power supply through the feeding terminal of the cradle. Attach hand strap Receiving electric power supply through the feeding terminal of the cradle. Show the status of success or failure of scanning and error occurrence. Shows the names of model, each specification, authentication text, logo and ID numbers. Shows serial numbers Cautionary note of laser Chart 1.CHG-3101/CRD-3101 Name of parts and functions 2-2. CHG-3101 ④ ⑤ ⑦ ① 114.5 ⑥ ⑧ 185 (80) 100 ⑪ 2 Detailed View 2-3. CRD-3101 ④ ⑤ ⑦ ① ② ③ 114.5 ⑥ ⑧ 185 ⑪ 100 ⑫ (80) ⑮ ⑭ ⑬ 3.CRD-3101 Detailed view ⑨ ⑩ Name 2. Power supply LED 2. Indication LED for wired data line 3. Indication LED for wireless data line 4. Terminal for power supply and Detector 5. Charging LED 5. Battery charger 7. Scanner detection switch 8. DC Jack 9. Plug-in phone jack 10. USB connector 11. Model name label 12. Dip switch 13. BD address label 14. Reserved 15. Reserved Function LED Confirming power supply Wired data line ( Between PC or Host system and Cradle) LED confirming connection / disconnection of Bluetooth Charging terminal for OPR-3101 LED confirming charging status of the battery pack Battery charger for the single battery pack Detecting when the scanner body is put on the battery charger. A jack for charging AC adopter Plug-in phone jack for RS-232C interface Connector for USB interface Shows the names of model, each specification, authentication text, logo and ID numbers. Switch for function settings *Please refer to chart 3 in the next page. Scanning it when connecting the scanner and cradle For other lavel area1. For other lavel area2. Chart 2.CHG-3101/CRD-3101 Name of parts and functions 2-4. Dip switch settings Dip switch located on the bottom of CRD-3101 Please follw the chart shown below DIP SW SW1 SW2 SW3 FUNCTION Invalid No security. Incwairi is effective. Opto protocol is invalid. SW4 The detection of the DTr signal is invalid. SW5 Initialization (Shipment setting) SW6 Software down load mode REMARKS Please use it with remaining power-off mode. It can connect without authentication. It must disable SW3 in case of connect Bluetooth devices except Scanner. It is forced to choose RS232C. Switch it on when RS32C I/F is not with DTR signals/ Contains of settings place back to default settings when switching it on. When the default settings finish, please turn it on. Used when upgrading a firm ware through using RS232C I/F. Please keep remaining power-off mode for nomal use. Chart3 Dip switch settings ※All switches are effective when they are power-on mode. ※SW2,3 and 4 are on, other SW are off when shipment setting. ON DIP switch l Detailed View 3.For use 3-1.About the scanner The charging battery pack is shipped without attaching the scanner. Please attach the charging battery pack to the scanner. As soon as attaching cradle or charger to the scanner, it will operate automatically ---Red LED, the status indicator lights. Also, when charging finishes, it becomes waiting mode. OPR-3101 Contains of status indicator LED Buzzer operation Status At the start of charging In the middle charging Reading codes LED Bluetooth disconnection Remarks red Light - It lights when the battery is not fully charged. green Light - It lights when the battery is fully charged. red Light - It lights when the battery is being charged. green Light - It turns green when the battery charge is completed. blue Blink red Blink green Blink blue Bluetooth connection Buzzer tone-sound Single tone short sound 2-tone semilong sound Contin uously - blink blue Light red Light red Light red Light 2tone long sound (Connecting completed) Single tone semilong sound 2-tone long sound Single tone long sound It behaves in case of reading Barcode and send that data to PC or Host system. Shows that it is a transmission failure. Shows that it is storing data on the memory. Shows that Bluetooth is in process of connecting. Shows the connection of Bluetooth has been completed. Shows Bluetooth connection failure Shows Bluetooth disconnection Shows 4.OPR-3101 Contains of status indicator LED 3-2 About the charging cradle CHG-3101 is specialized charger for OPR-3101. CHG-3101 is not only able to charge the scanner, but also the charging battery pack. ・LED display of the cradle Code LED display Powrer Supply LED color red red Charging LED ― green green/red Remarks It lights when the battery is not fully charged. Status LED when charging the battery pack with the cradle It lights both when the battery is fully charged and being charged in the beginning of charging, It lights both when the battery is fully charged in the beginning of charging and charging is completed. Green LED lights and red LED blinks periodically. It means either status that the battery pack is not attached or set properly. 5.CHG-3101 Display status 3-3.About the communication cradle CRD-3101is specialized communicating and charging cradle for OPR-3101. CRD-3101 is not only able to charge the scanner, but also the charging battery pack. It supports RS232C and USB interfaces. You can change them by transformation of cables. It automatically recognizes the interfaces by observing the signal voltages. *When both interfaces’ cables connects to the cradle, USB is prior to RS232C. ・Cradle LED display Code LED display Color Powrer Supply LED Red Orange Communication LED Red (※) Wireless LED Blue Red Charging LED ― Green green/red Remarks It lights when the adopter is supplied with power. It lights when it is sending and receiving data. Disconnection of interface cable, host PC waiting It lights when Bluetooth is connected, It continuously blinks when Bluetooth is not connected. The LED of the status display When charging the battery pack with the cradle. It lights both when the battery is fully charged and being charged in the beginning of charging, It lights both when the battery is fully charged in the beginning of charging and charging is completed. Green LED lights and red LED blinks periodically. It means either status that the battery pack is not attached or set properly. 6.CRD-3101 Display ※ It can’t detect when the host computer doesn’t support DTR signals.. ・USB interface USB 2.0 and full speed compliant specifications are supported, Host computer recognize it as a HID device. ※ It’s capable of Hi - Power drive. 3-4.Charging time As for CHG-3101/CRD-3101,l the battery connected to the cradle isn’t charged while the scanner is charged. Spec. Approx. 5 hours Approx. 10 hours AC supplying mode Remarks AC adopter drive The time needed for fully charging the empty battery USB Hi-Power drive 7.Charging times of CRD-3101/CHG-3101 3-5.How to change the battery pack. <Process> 1.Turn the screw of the bottom of the grip end anti clockwise with like a 1-Euro sized coin. 2.Open the lid and take out the old battery.(not to drop it.) 3.With checking for inner shape of Battery-box , insert new-BatteryPack faces Battery-terminal to Battery-box. 4.Close the lid and turn the screw clockwise. 4.Scanning barcodes When pressing the button, laser beam is output from the reading window. <○ Correct operation> 234567 890128 <×Wrong operation > 234567 890128 <×Wrong operation> 234567 890128 5.Connection of wireless communication system, Wireless specifications OPR3101 employs the Bluetooth (ver. 2.0 compliance) as a wireless interface. It is capable of communicating with the devices with similar profiles owing to SSP correspondence. ■Data sending outputs Class 2 ■the structure of connection 1:1 (*1:N is not supported.) ■Operation mode when connecting OPR3101 :Master CRD3101 or PC and other connecting device :Slave ■Authentication and encryption Authentication and encryption functions :Set with menu bar codes ※ When connecting with the communication cradle, authentication and encryption are effective. (In case of the DIP switch 2,3 are power-off mode. ※ There’s a need to match the settings of authentication and encryption in case of connecting other devices. ■Communication distance Approximately 10 meters ※ It varies depending on use environment. ■Connecting device settings Choose the device to connect. The specialized cradle is set by default settings. ※ When setting it initial setting of SO, communicating cradle is set as a connecting device. ※ When set PC and other devices, the items as below are initialized. ・Authenticating connection settings :none ・ PIN code settings :none ・ Encryption settings :none ・ ACK/NAK control settings :non procedural ■BD address settings Scan the BD address barcode written on the bottom of the scanner when connecting to CRD 3101. It is to specify the other party. Please let us know BD address when connecting it to USB adopter and other Bluetooth device so that we can offer you the BD address Barcode lavel. You can connect your Bluetooth device scaning this lavel. 10 ■Connecting authentication settings Settings for authentication settings Please complete to enter the pin code with 30 seconds due to the time limit of the authentication system. ※ Please set the PIN code before connecting with authentication. ※It may be a need to enter the pin code connecting with authentication. Then please enter the code again. ※You don’t need to enter the Pin code when connecting without authentications. 6.Connecting and disconnecting process 6-1.Connecting process CRD-3101 1. Connect CRD-3101 to AC adopter and eitherRS232C I/F or USB cable. 2. Make sure the power supply LED, communicating LED, and wireless LED blinking. 3. Connect the cable to the host computer. 4. Make sure the communicating LED lights of after blinking. 5. Scan the BD address label. 6. As soon as blue LED blinks, connecting starts. 7. When connecting succeed, blue LED starts to light after blinking and the buzzer sounds. ※Please let us know when connecting it to USB, adopter and other Bluetooth device so that we can offer you the BD address barcode. ※ Red LED blinks and buzzer beeps as a caution when connecting fails. 6-2.Disconnecting process 1.Disconect the communication as below. ・ Scan the label for disconnecting , [ +--DISC-+ ] 2. When disconnecting finishes, red LED lights and the buzzer beeps. ※Also you can disconnect the communication to read default setting menu Barcode [ SO] . 11 7. Settings for shipping The menu barcodes of scanner, communication and connection make settings easy. Therefore there are menu barcodes for the default settings. Default settingmenu is set before shipping. Default Setting [SO] Readable codes Code type UPC-A Transit Transit and Calculate Reading and code CD and CD length ○ × ○ ○ Prefix settings Suffix settings - CR Other transit items UPC-A Add-on × × ○ ○ - CR UPC-E ○ × ○ ○ - CR UPC-E Add-on × × ○ ○ - CR EAN-13 ○ × ○ ○ - CR EAN-13 Add-on × × ○ ○ - CR EAN-8 ○ × ○ ○ - CR EAN-8 Add-on × × ○ ○ - CR CODE-39 ○ × ○ × - CR Not transmit ST/SP CODE-39 Trioptic ○ × ○ × - CR Not transmit ST/SP NW-7(CODABAR) ○ × ○ × - CR Not transmit ST/SP Industrial2of5 ○ × ○ × - CR Interleaved2of5 ○ × ○ × - CR CODE-93 ○ × × ○ - CR CODE-128 ○ × × ○ - CR EAN-128 × × × ○ - CR S-Code ○ × ○ × - CR MSI/Plessey ○ × ○CD1 ○CD1 - CR UK/Plessey ○ × ○ ○ - CR Telepen ○ × × ○ - CR Matrix2of5 × × ○ × - CR Chinese Post Matrix 2of5 × × ○ × - CR IATA ○ × ○ × - CR RSS-14 × × ○ ○ - CR RSS-limited × × ○ ○ - CR RSS-expanded × × ○ ○ - CR PDF417 × × - - - CR MicroPDF417 × × - - - CR 12 8.Menu barcodes for settings Connection / disconnection settings for OPR3101 8-1.How to set When scanning the same setting items, the item most recently scanned is effective. Order 1 2 3 Menu barcodes for scan Scan the SET (zz)barcodes Scan the optional barcodes. Scan the END (zz)barcodes 8-2.Default settings The setting the place it back to the settings for shipping. Set Default End _ZZ_ _SO_ _ZZ_ ZZ SO ZZ 8-3.Connection / disconnection control Connection and disconnection can operate with the direct menu as below. (No need to scan the END ZZ barcodes.) Connect Disconnect _+-CONN-+_ _+-DISC-+_ +-CONN-+ +-DISC-+ ※ It’s impossible to connect the other scanner to current cradle or Bluetooth device without disconnecting operation. 13 8-4.Control settings for wireless output measurement The scanner keep sending and receiving status by setting the scanner with the items as below and that make various wireless performance measurement easy. COMMAND NAME _+-RFPOWER-+_ _+-TXSTART-+_ _+-TXDATA1-+_ _+-TXDATA2-+_ _+-RXSTART-+_ _+-AFHTEST-+_ _ZZ_ _CH00_ _CH39_ 10 _CH78_ 11 _PT00_ 12 _PT01_ 13 _PT02_ 14 _PMAX_ 15 _PMIN_ 16 _ZZ_ 17 _SO_ BARCODE _+-RFPOWER-+_ _+-TXSTART-+_ _+-TXDATA1-+_ _+-TXDATA2-+_ _+-RXSTART-+_ _+-AFHTEST-+_ _ZZ_ _CH00_ _CH39_ _CH78_ _PT00_ _PT01_ _PT02_ _PMAX_ _PMIN_ _ZZ_ _SO_ 14 COMMAND Inquiry Non-Modulation Non-Hop Hop Receive AFH Start/End of SetUp for below COMMAND Frequency LOW Frequency MIDDLE Frequency High Packet Type DH5 Packet Type 2DH5 Packet Type 3DH5 Transmission Power Max Transmission Power Min Start/End of SetUp for below COMMAND Initial Setting ※Command numbers 1 to 6 can scan directly without settings by start/end ZZ codes. After scanning these numbers , the commands keep operating as long as the red and green LED blink. Press the trigger button to release the command. ※There’s a need to scan start/end ZZ codes concerning command 8 to 15. ※ For example, you can confirm the RF output with read few RF-test Barcode combination. Confirm the Non-Modulation, Non-Hop and AHF with under condition. Data Packet type : 2DH5 , Frequency : Low , Maximum RF ou 1 「ZZ」→「_CH00_」→「_PT01_」→「_PMAX_」→「ZZ」 2 「_+-TXSTART-+_」 :Keep Non-Modutation mode after read this Barcode and during LED-flushing. Press Trigger-Switch to release Non-modulation mode. Turn off LED after press Trigger-Switch. 4 「_+-TXDATA1-+_」 : Under the step1 condition , for confirmation Non-Hop mode by reading this Barcode. Keep to output Non-hop mode during LED flushing after read this Barcode. 5. To release Non-hop mode , do operate step3 6. Under the step1 condition , for confirmation AFH mode by reading this Barcode. Keep to output AFH mode during LED flushing after read this Barcode. 7. To release AFH mode, do operate step3. 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2007:03:23 15:31:25+09:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:03:23 15:31:25+09:00 Format : application/pdf Title : Microsoft Word - UsesManual_OPR31012007320.doc Creator : hkaneda0240 Document ID : uuid:94c26297-b92f-456d-b400-3085587d9bd0 Instance ID : uuid:352d645d-8854-4175-ad50-ebd941254e8f Page Count : 16 Author : hkaneda0240EXIF Metadata provided by EXIF.tools