OPTOELECTRONICS PX25 Wireless 2D Data Collector User Manual Users manual

OPTOELECTRONICS Co., Ltd. Wireless 2D Data Collector Users manual

Users manual

PX-25 SS08068 Master Specifications 2D Data Collector with Bluetooth Product Name PX-25 Specification No SS08068 Edition Initial release Date of Publication Nov 5,2008 Original Doc. No. SS08059 OPTOELECTRONICS Co., Ltd. 4-12-17 Tsukagoshi, Warabi-shi, Saitama, 335-0002 Japan TEL: 81+(0)48-446-1183 FAX: 81+(0)48-446-1184
PX-25 SS08068 1Revision History Specification No.: SS08068 Product name : PX-25 Revision Date Section Description of Changes Initial release 2008/11/5 - -
PX-25 SS08068 2Table of Contents 1. Abstract .............................................................................................................................1 2. Overview ...........................................................................................................................1 3. Physical Features..............................................................................................................2 4. Basic Specifications...........................................................................................................4 5. Optical Specifications ........................................................................................................6 6. Technical Specifications ....................................................................................................6 7. Aiming .............................................................................................................................10 8. Bluetooth ......................................................................................................................... 11 9. Serial Label .....................................................................................................................12 10. Packaging Specifications...............................................................................................13 11. Durability........................................................................................................................15 12. Warranty........................................................................................................................16 13. Regulatory Compliance ................................................................................................. 17 14. RoHS .............................................................................................................................18 15. Precautions....................................................................................................................18
PX-25 SS08068 11. Abstract This manual provides specifications for the data collector with an embedded 2D data collector which offers Bluetooth, PX-25. 2. Overview ・ PX-25 consists of a 130 million pixel-CMOS sensor and a wide angle lens with Bluetooth. ・ Scanned data is output via Bluetooth interface. ・ Bluetooth and IrDA (for the communication with the dedicated cradle) interface enables data communication with higher models. ・ This product is compliant with RoHS. 2.1. Product / Model Name Product name: PX-25 2.2. Features of PX-25 ・ Compact and handy design ・ The data collector is able to read 2D barcodes. ・ Stored data is sent to the recipient through Bluetooth interface. On the other hand, IrDA can communicate with host PC via the dedicated cradle. ・ Embedded Bluetooth is compliant to version 1.2 and has installed profile. ・ PX-25 can operate for a long time with a dedicated built-in lithium-ion battery (1880mh). ・ Unit is charged when placing it on the dedicated cradle. (To directly connect the dedicated adapter to PX-25 can also charge the unit.)
PX-25 SS08068 23. Physical Features 3.1. Dimensions Figure1: Dimensions 3.2. Weight Max. 182g (including lithium-ion battery pack)
PX-25 SS08068 33.3. Physical Features 12345678910111213 Figure2: Physical features No. Item Specification 1. Scanning window LED light for scanning barcode is emitted from the window. 2. IrDA Use for the communication with dedicated cradle 3. LED To notify the status of barcode scanning, Bluetooth communication, and warnings so on. 4. LCD Indicates scanned barcodes and operational items 5. Trigger key Press when scanning barcodes 6. Up / Down keys Used when selecting items from a menu. 7. 10 operational keys Used for numerical, “ENTER”, decimal point input. 8. DC Jack Used for the dedicated power supply 9. Speaker 10. Terminals Used to charge a lithium-ion battery of a unit when placing the unit on the dedicated terminal 11. Battery cover Remove when replacing the rechargeable battery 12. Battery cover lock Used to lock / open the battery cover 13. Strap hole Hole for attaching a hand strap
PX-25 SS08068 44. Basic Specifications Item Specification Remark CPU 32Bit RISC Micro computer (ARM7 Core) Produced by ST Micro Embedded ROM 256Kbyte + 16Kbyte (for DATA) Control section Embedded RAM 64Kbyte FROM(NOR) 4Mbyte (User area: about 1Mbyte) OS/AP Memory SRAM 2Mbyte (User area : about 480kbyte) 4Mbyte (Option) for WORK/DATA OS μITRON LCD semi-transmissive LCD Number of dots 112×64 dots Display section Back light Available Operating section Key type 18 keys Indication LED Tri-colored emitting elements (red/green/blue) Buzzer Adjustable volume/tone Specification Bluetooth Ver1.2 HCI module produced by Kyocera Installed profile SPP Stack produced by iAnywhere Frequency 2402MHz to 2480MHz Transmission power Class 2 Communication range Perspective 10m Communication range may differ due to the environments. Baud rate 115.2kbps Bluetooth Antenna 1/4λ (surface mounted) IrDA IrDA Ver1.2(physical layer compliant) Baud rate: Maximum 115.2Kbps Main power Lithium-ion secondary battery 1880mAh Regular voltage 3.7V How to charge With a dedicated AC adapter or cradle With a rubber pad for the jack part With a dedicated AC adapter: about 4 hours and half Charging time With a dedicated cradle: about 7 hours and half *1 Scanning frequency Over 30,000 times *2 Up-time 25 hours *3 Backup battery MS (Manganeese Silicon) lithium secondary battery 3.4mAh Without full dischargePower supply Data holding time 72 hours or less After main battery has been discharged.
PX-25 SS08068 5Scanning method CMOS area sensor (black/white) MSI-1001 Effective pixels 1.3 million pixels Light source Red LED Scanning angle range Horizontal: 47° Vertical: 37.5° 2D PDF417, Micro PDF417, QR Code, Micro QR Code, Data Matrix (ECC 0-140, ECC200), Maxi Code(mode0~5), Aztec Code, Composite Code Intelligent Mail Barcode 2D barcode scanning section (R-3D, MDI-1001 specification) Supported symbology 1D WPC (EAN, JAN, UPC-A/UPC-E), Industrial 2of5, IATA, Interleaved 2of5, NW-7(CODABAR), CODE-39, CODE-93, CODE-128, MSI/Plessey, RSS Code Dimensions 140×44×26mm Weight Max. 132g (including lithium-ion battery pack) Operation temperature and humidity -10°C to 40°C 20%RH to 85%RH No frost, no condensation Storage temperature and humidity -20°C to 60°C 20%RH～85%RH No frost, no condensation Conditions Charging temperature 0 to 40°C Frequency ６sides, 3cycles Height 150cm Drop test *4 Floor Concrete Dust and drip proof IP42 Regulatory compliance Illumination LED safety: JIS C 6802:2005 class １ IEC 60825-1＋A2:2001 Class １ VCCI Class B Radio Law 38-24-1CE CE Marking, FCC Bluetooth logo certification Accessories Dedicated lithium-ion battery (1880mAh) Hand strap User’s manual Dedicated cradle For IrDA communication / charging Option Dedicated AC adapter [6V/2000mA] For charging *1 The dedicated AC adapter is for charging use only. Please detach it when using the product.*2 when scanning a barcode once per second at room temperature + frequency of connecting to Bluetooth. *3 when scanning a barcode twice in 10 seconds at room temperature + frequency of connecting to Bluetooth. *4 Shock resistance Conditions of the shock resistance test are: ・ Does not count scratches or whitening on a surface as a malfunction. ・ Shock resistance is approved when no malfunction occurs after the test. ・ Shock resistance is approved if the battery cover is not unhooked after the test
PX-25 SS08068 65. Optical Specifications Item Specifications Unit Scanning method CMOS area sensor (black/white) - Scanning speed 30 fps Effective pixels 1280(H)×1024(V) Pixel Aiming LED center wave length (green LED x 2) 527 nm Illumination LED center wave length (Red LED x 4) 630 nm Scan angle Horizontal: 47 Vertical: 37.5 ° Focal plane 85 mm 6. Technical Specifications The conditions for technical specifications are as follows, unless otherwise specified in each section. Conditions Item Conditions Ambient temperature and humidity Room temperature and humidity Ambient light 1,000 to 1,500 lx (barcode surface) Light source 3 wave lengths inverter fluorescent Angles α=0° β=＋15° γ=0° Curvature R = ∞ Power supply voltage 3.3V Decoding test Approve the performance when decoding is successful in 70% of ten tests performed. Barcode sample As specified below <Bar Code> Resolution Barcode PCS Size [mm] Digit 0.254mm Code 39 0.9 14×10 2 0.1mm Code 39 0.9 11×10 4 0.26mm JAN-13 0.9 25×19 13 0.26 mm JAN- 8 0.9 17.5×15.5 8 Barcode sample: OPTOELECTRONICS test sample – Resolution = 0.127mm or OPTOELECTRONICS test sample – Resolution = 0.26mm N:W ratio = 1:2.5 <PDF417> Resolution Error correction PCS Size [mm] Number of character 0.339mm Level-4 0.9 35×22 17 0.254mm Level-4 0.9 26×16 17 0.127mm Level-4 0.9 13×8 17 Barcodes printed by a normal printer – aspect ratio = 3 : 1
PX-25 SS08068 7 <QR Code (Model-2)> Resolution Error correction PCS Size [mm] Number of character 0.339mm M 0.9 10×10 44 0.169mm M 0.9 5×5 44 Barcodes printed by a normal printer <Data Matrix> Resolution Error correction PCS Size [mm] Number of character 0.339mm ECC200 0.9 8×8 40 0.169mm ECC200 0.9 4×4 40 Barcodes printed by a normal printer *As for the size of each barcode, quiet zone length is excluded. 6.1. Physical Features Figures of scanning field shows the distance from the focal plane of the data collector. Figure3: Scanning field
PX-25 SS08068 86.2. Printed Contrast Signal 0.45 (MRD 32%) or higher (over 70% of reflectivity of space and ) *Scanning performance may decline if dirt or scratches mar the optical window. Keep the optical window clean. 6.3. Pitch, skew and tilt Pitch angle: α = ±50° Skew angle β = ±60° Tilt angle: γ = 360° Conditions: Barcode sample: CODE-39, PDF417, Resolution 0.254mm, PCS0.9 as specified in the section 6. Distance: 63mm from the focal plane of the data collector Curvature: R=∞ (For pitch/tilt angles, skew angle β = +15°) Figure4: Pitch, skew and tilt *When scanning symbologies printed on highly glazed paper such as glossy paper or card case, scanning performance of this data collector may decline due to the specular reflection of LEDs. In such cases, adjust scanning angle by incline the data collector to 15 degrees toward the skew direction to improve scanning performance. When turning off the lighting LED, it may decline the scanning performance unless the ambient light is 1000 lx or higher. Also, the light or reflection light caught by the camera may decline scanning performance, when using codes on the above described paper.
PX-25 SS08068 96.4. Curvature With 8-digit JAN barcode, decoding performance is guaranteed when R≥15 mm. With 13-digit JAN barcode, decoding performance is guaranteed when R≥20 mm. Conditions Barcode sample: CODE-39, PDF417, Resolution 0.254mm, PCS0.9 as specified in the section 6. Distance: 63mm from the focal plane of the data collector Curvature: R=∞ (For pitch/tilt angles, skew angle β = +15°) Figure5: Curvature
PX-25 SS08068 107. Aiming During scan operation, the Green LED patterns as shown below will be exposed. It is called as “Aiming” and is superimposed on the illuminated scan field. 7.1. Aiming Pattern Figure6: Aiming * Aiming is a guide to support the scanning operation. Note that an aiming pattern neither indicate exact sannable width nor distance between a data collector and a barcode. 7.2. How to Use Aiming ・ A recommended aiming point is where two central LED light patterns (green and square-shaped) overlap together. ・ To scan a barcode within a width of aiming range, make sure that two central LED light patterns overlap together. Then locate the center of the overlapped LED light pattern on the center of the barcode. ・ To scan a barcode wider than a width of aiming range, aim the barcode from farther point. Make sure that the barcode is in between two LED light patterns at right and left ends. * The scanning performance may decline due to the specular reflection when the symbology is printed on certain types of materials. In such cases, incline the data collector at 15 degrees to adjust scanning angle. Distance from the focal plane 3080130180[単位:mm](水平方向画角) Horizontal angle of viewUnit: mm
PX-25 SS08068 11 8. Bluetooth 8.1. Installed Profile Bluetooth wireless communication is used as a wireless interface. 8.2. Communication Configuration 1 to 1 (One data collector to one host system) 8.3. Operating Mode While Connected to the Host System Master mode 8.4. Security Mode Authentication enabled 8.5. Encryption Encryption enabled
PX-25 SS08068 129. Serial Label The labels shown below are affixed to the data collector. Figure7: Serial label Figure8: FCC caution label Text: black Text: black
PX-25 SS08068 1310. Packaging Specifications 10.1. Individual Packaging Specification Put the data collector in a protective foam bag and place it in an individual packing box. Size of the package (after assembly) 255(W) × 120(D) × 105(H) mm Figure9: Individual packaging specification (T.B.D )
PX-25 SS08068 14 10.2. Collective Packaging Specification Figure10: Collective packaging specification (T.B.D ) Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union.
PX-25 SS08068 1511. Durability 11.1. Ambient Light Immunity Decoding performance is guaranteed when the range of illumination on a barcode surface is between zero and the following values: Incandescent light 10,000 lx Fluorescent light 10,000 lx Sunlight 1000,000 lx Conditions Barcode sample: CODE-39, Resolution 0.254mm, PCS0.9 as specified in the section 6. Distance: 63mm from the focal plane of the data collector Angles: α = ±50°, β = ±60°, γ = 360° Curvature: R=∞ * Direct light or specular reflection from a light source should be prevented from entering the acceptance area. 11.2. Dust and Drip Proof IP42 11.3. Vibration Strength (without packaging) No malfunction occurred after the following test. Vibration test: Increase the frequency of the vibration from 10Hz to 100 Hz with accelerated velocity 19.6m2/s (2G) for 60 minutes in non-operating state Repeat this routine in each X, Y, Z direction once for 60 minutes each. 11.4. Vibration Strength (with individual packaging) No malfunction occurred after the following test. Vibration test: Increase the frequency of the vibration from 10Hz to 100 Hz with accelerated velocity 19.6m2/s (2G) for 60 minutes in individually packaged state. Repeat this routine in each X, Y, Z direction once for 60 minutes each. 11.5. Drop Test (without packaging) No malfunction occurred after the following test. Drop test: Drop the data collector from a height of 150cm onto a concrete floor. (Three times in each of 6 angles) 11.6. Drop Test (with individual packaging) No malfunction occurred after the following test. Drop test: Drop an individually packaged data collector from a height of 70cm onto a concrete floor once on its 1 corner, 3edges, and 6 sides. (10 total drop tests)
PX-25 SS08068 16 11.7. Static Electricity Air discharge: ±10 kV max. (No malfunction) ±15 kV max. (No destruction) Contact discharge: ±6 kV max. (No malfunction) ±10 kV max. (No destruction) Measurement environment: Use electrostatic testing device compliant with IEC 61000-4-2.Discharge resistance: 330 Ω Capacitor charging: 150 pF 11.8. Reliability MTBF (Mean Time Between Failures): 5 years Life cycle of the CMOS camera: 150,000 hours 12. Warranty 12.1. Warranty Period Optoelectronics Co., Ltd. (hereinafter ‘Optoelectronics’) warrants that this product is free of defects and malfunctions for a period of 12 (twelve) months beginning on the last day of the month in which it is shipped. Optoelectronics will repair product defects or malfunctions that arise in the course of normal usage during the twelve-month warranty period free of charge. Any repair or replacement of the product after the foregoing warranty period will be charged at regular rates. Repair or replacement of the product due to defects or malfunctions that arise as a result of customer mishandling will be charged at regular rates, even during the foregoing warranty period. 12.2. Delivery Products for maintenance or repair shall be sent back to Optoelectronics. The sender is responsible for all shipping costs. 12.3. Repair Timeframe Repaired products shall be shipped back to the customer within 20 days after acceptance by OPTOELECTRONICS. However, the time needed for the repair of products with early failures need to be separately discussed with Optoelectronics. Expedited repairs may be available, subject to terms agreed to by OPTOELECTRONICS and the customer. 12.4. Maintenance Period The maintenance period of this product is 5 years after its shipment. OPTOELECTRONICS may discontinue maintenance for this product during the 5-year maintenance period if a satisfactory replacement product or maintenance solution is agreed to. 12.5. Others Any additional warranty issues must be discussed with OPTOELECTRONICS on a case-by-case basis.
PX-25 SS08068 1713. Regulatory Compliance 13.1. LED Safety (for illumination) ･IEC60825-1+A2:2001 Class 1 ･JIS C 6802:2005 Class 1 13.2. Product Safety ･IEC60950-1 ･EN60950-1 13.3. EMC ・EN55024 ・VCCI Class B ・FCC Part 15 Subpart B Class B ・FCC Part 15 Subpart C FCC Part15 subpart B&C Statement VCCI Class B FCC Part15 subpart C Statement FCC ID: UFOPX25 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : ( 1 ) this device may not cause harmful interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. This is a Class B product, to be used in a domestic environment, based on the Technical Requirement of the Voluntary Control Council for Interference from Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may cause radio interference. Harmful Interference Notice This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment or devices • Connect the equipment to an outlet other than the receiver's • Consult a dealer or an experienced radio/TV technician for assistance Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the user's authority to operate this equipment.
PX-25 SS08068 18 13.4. R&TTE ・EN300 328 ・EN301 489-1 ・EN301 489-17 13.5. Others ・Certification for Construction Design of Specified Radio Equipment ・Bluetooth logo certification 14. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 15. Precautions 15.1. Precaution about the LED Light Do not stare into the laser light from a scanning window. It may harm your eyes. Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Radio Low The data collector has obtained the Certification for Construction Design of Specified Radio Equipment. Therefore it does not need to have a radio station license in Japan. The following activities are prohibited under the Radio Law: • Remodeling and disassembly • Peeling off the certificate label Do NOT use the data collector under the following environment: *Otherwise radio interference may affect other device and end up with causing physical or material damage. • Safety apparatus and medical device for human body protection • Environment where is concerned to cause serious damage Handle Handle this product carefully. Do not deliberately subject it to any of the following. (1) Shock ・Do not drop from the non-standard height. ・Do not place any heavy items on the data collector. ・Do not squeeze it between any heavy items. ・Do not swing around the cable. (2) Temperature Conditions ・Do not use the data collector at temperatures outside the specified range. ・Do not pour boiling water on the data collector. ・Do not throw the data collector into the fire.
PX-25 SS08068 19(3) Foreign Materials ・Do not put the data collector into liquid. ・Do not put the data collector into chemicals. (4) Others ・ Do not disassemble this product. ・ Do not use the data collector near a radio or a TV receiver. It may cause reception problems. ・ The data collector may be damaged by voltage drops caused by lightning. ・The data collector may not perform properly in environments when placed near a flickering light, such as a CRT Export Administration Regulations This product is subject to the strategically controlled exports regulated under “Foreign Exchange and Foreign Trade Laws”. Therefore, export of this product may require an export permission of Japanese government. Bluetooth To communicate via Bluetooth, the device which PX-25 is connected to must support the same Bluetooth version and profile as PX-25’s. ・ PX-25 is compliant to Bluetooth standards. However, we cannot assure the connection between PX-25 and other Bluetooth devices which have not been tested. ・ Bluetooth supporting devices use 2.4 GHz frequency band. However, many other sorts of devices also utilize this frequency band. It may effect the communication speed or communication range of this data collector. ・ The use of PX-25 outside of the European Union, the United States and Canada is punishable under the law. ・ Communication speed and communication range of PX-25 may differ due to the obstacles and radio wave conditions between PX-25 and the device, which PX-25 is connected to. ・ Conditions of the device, which PX-25 is connected to, may also affect the communication speed and communication range of PX-25. Frequency Baud The frequency band 2.4 GHz is utilized by this scanner. Read carefully the followings before using this product. In the frequency band of this scanner, scientific, medical and industrial devices including microwaves are used. Also other radio stations including local private radio station for mobile object identification requiring license for such as manufacturing lines at factories, specific power-saving radio station requiring no license and amateur radio station are managed. Please make sure that “other radio stations” are not managed in the frequency band 2.4 GHz before using this scanner. In case that radio interference occurs between this scanner and “other radio stations,” change the service space immediately, or stop transmitting radio wave to avoid the interference. If you have any questions or troubles, please contact our marketing group.

Navigation menu