ORION ELECTRIC M2C3B DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER User Manual MANUAL 2
ORION ELECTRIC CO., LTD. DVD VIDEO PLAYER & VIDEO CASSETTE RECORDER MANUAL 2
Contents
- 1. Manual 1
- 2. MANUAL 2
MANUAL 2
37
Recording (VCR)
Timer recording
Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.
Timer recording
Notes:
• Press CANCEL to move cursor backward for correction.
•To record from external source set the channel to "L1" or
"L2". "L1" or "L2" will appear next to CH 125 (or 69).
Notes:
•If the timer symbol ( ) blinks when the timer recording ended,
the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC to cancel the
timer program or press TAPE EJECT to remove the cassette
tape.
•During timer recording standby mode, the VCR mode cannot be
operated. To use the VCR, press TIMER REC at first, then press
DVD/VCR to change to VCR mode. After you use the VCR,
press TIMER REC again to put the VCR into timer recording
standby mode.
•If you press TIMER REC during timer recording, the recording
operation will be interrupted. If you press TIMER REC again
within the programmed time, the recording operation will start
again.
•After a power failure or disconnection of the power plug, all
programmed recording settings and time display will be lost
upon resumption of power. In this case, reset the clock
24
and
reprogram any timer recording.
Press VCR MENU. Select “TIMER REC SET”,
then press ENTER.
Preparation:
• Press DVD/VCR to select the VCR mode.
•Load a cassette tape with the erase prevention tab
intact.
•Check the time and date are correct
24
.
Example: Program a timer recording for the 26th day,
channel 125
(CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1
Press SET + or – to select one of the program
line, then press ENTER.
2
Press SET + or – to select the date, then press
ENTER.
3
Set the start time, end time, channel and tape
speed as in step 3.
4
To enter other programs, repeat step 2
through 4.
•To return to the normal screen,
press VCR MENU twice.
5
Press TIMER REC. The timer symbol ( ) will
appear on the display and the VCR stands by
for recording.
At the same time, VCR mode will
change to DVD mode automatically.
You can use DVD even if the VCR is
in the timer recording mode.
If you do not use the DVD, turn the
power off.
6
Notes:
•The timer recording will start at 5 seconds before the time
you predetermined.
•If the timer symbol( ) does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded.
29
•If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed.
29
2, 3
1-3
DVD/VCR
TIMER REC
CANCEL
1, 5
TAPE EJECT
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p26-37 11/22/02, 15:4337
38
Recording (VCR)
Setting procedure
To set daily/weekly timer
To confirm Timer program:
At step 1 on the previous page select “TIMER REC
SET” and press ENTER.
The timer program list will appear on the screen.
2
The current day (Friday) SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-WE WKL-TH (Weekly Thursday)
(Weekly Wednesday)
One month later
minus one day
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-
SA: Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous
page. At step 3 press SET + or – repeatedly until the
desired setting appears. Then press ENTER.
When you press SET – repeatedly, the
DATE indicator will change as follows, in
this case the day is Friday.
If the programs overlap another
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
Notes:
•The daily/weekly recording can be made continuously until the
recording is canceled or the tape reaches the end.
•During timer recording the automatic rewinding mechanism
does not function.
8 : 00 11 : 00
9 : 00 10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
Notes:
•If there are other timer record programs remaining, TIMER
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
•You cannot confirm the Timer program during timer recording
operation.
•You can correct or cancel a programmed setting in program
confirm mode.
If the Timer has been activated, press TIMER
REC to deactivate the Timer.
The timer symbol ( ) will
disappear. Then press DVD/VCR to
change to VCR mode.
1
To cancel Timer program:
Press SET + or – to select the unwanted program,
then press CANCEL to cancel the program.
3
Press VCR MENU repeatedly until the menu
screen is cleared.
4
Timer recording (continued)
To confirm or cancel a program
SET +/–
ENTER
VCR MENU
CANCEL
DVD/VCR
TIMER REC
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p38-41 11/22/02, 15:4338
39
Recording (VCR)
Stereo recording and playback /
Separate Audio Program (SAP)
When a MTS STEREO broad-
cast is received, “STEREO” will
appear on the screen for about
4 seconds and the program can
be viewed or recorded in stereo.
The Hi-Fi stereo recording pro-
cedure is the same as for normal
recordings.
Notes:
•When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
•When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cable not connected),
the sound will be monaural.
When viewing an MTS stereo TV program, or playing a
prerecorded VHS Hi-Fi stereo videotape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The "R"
and "L" positions allow the audio from the Right or Left Hi-
Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape or
TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for
several seconds. Refer to the chart below.
Output selection
Your DVD/VCR is fitted with a SAP broadcast system which
enables you to switch to a separate audio program when
viewing a selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
When the VCR is turned on or a channel selection is
made, make certain the letters "SAP" appears on the
screen for about 4 seconds. This means that the "Sepa-
rate Audio Program" broadcasting is available.
Listening to SAP
Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity record-
ing of MTS STEREO TV broadcasts.
Separate Audio Program (SAP)
OUTPUT
SELECTION
STEREO
L CH
R CH
MONO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Press VCR MENU. Then press SET + or – to
select "SAP".
1
Press ENTER to select “ON”.
Then press VCR MENU until the
menu screen is cleared.
2
STEREO SAP SAP
OR
SET +/–
ENTER
CANCEL
DVD/VCR
VCR MENU
Other functions (VCR)
Note:
When using a CATV system, stereo TV programs may be
transmitted over a mono cable channel. In this case
"STEREO" will not appear and the sound will be in mono.
Other functions (VCR)
AUDIO SELECT
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p38-41 11/22/02, 15:4339
40
Other functions (VCR)
To AUDIO (L) OUT
AUDIO/VIDEO cable (supplied)
Playback VCR
To VIDEO OUT To AUDIO (R) OUT
Recording VCR
To AUDIO (L) IN
To VIDEO IN To AUDIO (R) IN
Duplicating a video tape
If you connect the DVD/VCR to another VCR or Camcorder, you can duplicate
a previously recorded tape. Make all connections before turning on the power.
Duplicating a video tape
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
AUDIO/VIDEO cable (not supplied)
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
Recording VCR
To AV Jack
Playback Camcorder
Connection with second VCR
Connection with Camcorder
Press SP/SLP to select the desired tape speed
SP or SLP.
It is recommended that you set the
tape speed to the SP mode on the
recording VCR for best results.
1
Press INPUT SELECT once or twice to select
AUDIO/VIDEO input position.
"L1" or "L2" will appear in the display.
2
Press REC on the recording VCR.
The duplicating process begins.
3
Press PLAY on the playback VCR or Camcorder.
4
Press STOP after duplicating a video tape.
5
L1: on the rear panel
L2: on the front panel
Preparation:
• Turn ON the TV and select the corresponding video
input.
• Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
•Load a cassette tape with the erase prevention tab
intact.
•Load a previously recorded tape into the playback
VCR or Camcorder.
5
1
4
2
DVD/VCR
2C31101A (E)p38-41 11/22/02, 15:4340
41
Other functions (VCR)
Recording a DVD/CD disc
You can record disc material in DVD, Audio CD, etc. onto a Video
tape with this DVD/VCR.
Duplicating a DVD or CD disc
Press SP/SLP to select the desired tape speed
SP or SLP.
Preparation:
• Turn ON the TV and select the corresponding video
input.
•Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
•
Load a cassette tape with the erase prevention tab intact.
• Load a DVD/CD disc.
1
Press DVD/VCR to select the DVD mode.
The DVD indicator will light.
2
Press PLAY to start playback.
3
Press REC to start recording.
The DVD/VCR will change to the
VCR mode automatically and the
playback picture or sound will be
duplicated on the video cassette
tape.
4
Press STOP if you finish recording.
If you wish to stop a DVD/CD disc,
press DVD/VCR to change the DVD
mode, then press STOP.
5
Notes:
• You may not be able to record the beginning of the disc.
Begin VCR recording once program playback commances
on the DVD.
• You can not record discs encorded with copy guard
function. The following icon and text will show up on the
TV screen.
5
1
4
2
3
Other functions (VCR)
DISC IS COPY PROTECTED
00 : 00 : 00 SP
2C31101A (E)p38-41 11/22/02, 15:4341
42
Playing a disc
This section shows you the basics on how to play a disc.
CAUTION
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.
Basic playback
Preparations:
•When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. This
may include S-video or component video inputs which are exclusive to DVD playback.
• When you want to enjoy the sound of discs from the audio system, turn on the audio system and select the input connected
to the DVD/VCR.
1
3
4
5
Press ON/STANDBY (I / ).
The DVD/VCR turns on.
Press DVD/VCR to select the DVD mode.
The DVD indicator will light.
Press OPEN/CLOSE.
The disc tray opens.
Place the disc on the disc tray.
With the playback
side down
•There are two different disc sizes. Place the disc
in the correct guide on the disc tray. If the disc is
out of the guide, it may damage the disc and
cause the DVD/VCR to malfunction.
•Do not place a disc which is unplayable in this
DVD/VCR.
DVD
VCD
CD
2
1
43
,
5
2
Press OPEN/CLOSE or PLAY on the unit.
The disc tray closes automatically.
On the TV-screen,
changes to
“Reading” and then playback
commences.
•A menu screen will appear on the TV screen, if
the disc has a menu feature.
Press / or / to select title.
Press ENTER.
•Title is selected and play
commences.
Press STOP to end playback.
•The unit records the stopped point,
depending on the disc. “ ”
appears on the screen. Press
PLAY
to resume playback (from
the scene point).
•If you press STOP again or unload
the disc (“ ” appears on the
screen.), the unit will clear the
stopped point.
Reading
6
7
8
To start playback in the stop mode
Press PLAY.
Basic playback (DVD)
OR
TR AC KING / S ET +
TR AC KING / S ET –
2C31101A (E)p42-45 11/22/02, 15:4342
43
Basic playback (DVD)
To pause playback (still mode)
Press PAUSE/STILL during playback.
To resume normal playback, press
the PLAY button.
•The sound is muted during still
mode.
To stop playback
Press STOP.
To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray
opens completely.
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Playing a Disc while the VCR section is
recording or standing by for timer recording
1) Start to record.
Follow step 1~5 on page 34.
• If the DVD/VCR is standing by for recording, turn on
the DVD/VCR.
2) Press DVD/VCR to select DVD mode. The DVD
indicator will light.
3) Play a disc.
Follow step 3 ~ step 5 on page 42.
•Press PLAY if the DVD/VCR does not start to play a
disc automatically.
4) Stop to play.
Press STOP to stop play back a disc.
Notes:
•If a non-compatible disc is loaded, "Incorrect Disc", "Region Code Error" or "Parental Error" will appear on the TV
screen according to the type of loaded disc. In this case, check your disc again (See pages 8 and 60).
• Some discs may take a minute or so to start playback.
• When you set a single-faced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the
PLAY button on the unit, "Reading" will appear on the display for 40 seconds and then "Incorrect Disc" will continue to
be displayed.
•Some playback operations of DVDs may be intentionally fixed by software producers. Since this unit plays DVDs
according to the disc contents the software producers designed, some playback features may not be available. Also
refer to the instructions supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise will be heard from the analogue stereo outputs. To avoid
possible damage to the audio system, the consumer should take proper precautions when the analogue stereo
outputs of the DVD player are connected to an amplification system.
• Do not move the DVD/VCR during playback. Doing so may damage the disc.
• Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so
may cause the DVD/VCR to malfunction.
• Do not push up on the disc tray or put any objects other than discs on the disc tray. Doing so may cause the DVD/
VCR to malfunction.
•In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-
screen menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure
to press the STOP button on your remote control once the movie is completed.
• During the DVD playback if you change the operating mode from DVD to VCR, the DVD will continue to play back the
disc and stop after about 5 minutes.
• There may be a slight delay between you pressing the button and the function activating.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast
may appear on the TV screen while playing a DVD video disc because the high
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this DVD/VCR, you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
About
DVD VCD CD
The
DVD VCD CD
icons on the heading bar show the playable discs for the
function described under that heading.
DVD
: You can use this function with DVD video discs.
VCD
: You can use this function with VIDEO CDs.
CD
: You can use this function with audio CDs and CD-R/RW CDs.
OPEN/CLOSE
STOP
PAUSE/STILL
DVD/VCR
PLAY
2C31101A (E)p42-45 11/22/02, 15:4343
44
FWD
Playing a disc (continued)
You can play discs at various speeds.
Playing in fast reverse or fast forward directions
Playing frame by frame
Press PAUSE/STILL during still playback.
Each time you press the PAUSE/
STILL button, the picture advances
one frame.
To resume normal playback
Press PLAY.
Note:
The sound is muted during frame by frame playback.
DVD
VCD
CD
REW
PLAY
PAUSE/STILL
SKIP
SKIP
SLOW
Playing in slow-motion
Press SLOW during playback.
Each time you press the SLOW
button, the slow-motion speed
changes.
To resume normal playback
Press PLAY.
Note:
The sound is muted during slow-motion playback.
Locating a chapter or track
Press SKIP( ) Forward or SKIP( ) Reverse
during playback to locate a chapter that you
want to watch.
Each time you press the button, a
chapter or track is skipped.
Basic playback (DVD)
Press REW or FWD during playback.
REW: Fast reverse playback
FWD: Fast forward playback
Each time you press the REW or
FWD button, the playback speed
changes.
To resume normal playback
Press PLAY.
Notes:
•The DVD/VCR mutes sound and subtitles during
reverse and forward scan of DVD video discs.
However, the DVD/VCR plays sound during fast
forward or fast reverse play of audio CDs.
• The playback speed may differ depending on the disc.
• A “Prohibition” symbol may appear at the upper left of the screen. This symbol means either the feature you tried is not
available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate a problem with the
DVD/VCR.
•The unit is capable of holding a still video image or On screen display image on your television screen indefinitely. If you
leave the still video image or On screen display image displayed on your TV for an extended period of time, you risk
permanent damage to your television screen. Projection televisions are very susceptible.
Notes:
DVD
VCD
CD
DVD
VCD
DVD
VCD
2C31101A (E)p42-45 11/22/02, 15:4344
45
Basic playback (DVD) Advanced playback (DVD)
MP3/WMA/JPEG playback
This player can play back the MP3/WMA/JPEG-data which has been recorded
on CD-R or CD-RW. To produce the MP3/WMA/JPEG-data, you need a
Windows-PC with CD-ROM drive and a MP3/WMA/JPEG-encoding Software
(not supplied).
The Apple-HFS-System can not be played.
Advanced playback (DVD)
0-9
ENTER
PLAY
OPEN/CLOSE
STOP
MP3/WMA Playback
CD
1
3
4
Press OPEN/CLOSE.
The disc tray will open.
Place a disc on which MP3
or WMA files have been
recorded onto the tray.
Press OPEN/CLOSE or PLAY.
The disc tray closes automatically.
On the TV-screen,“Reading” will appear.
Reading will take as
much time as the
number of file.
A file menu screen will appear on the TV screen.
Press or to select folder.
Press / or / or Number keys to select
the desired file, then press ENTER.
The file is selected and play commences.
• In case the folder includes more than
15 tracks, press or to display
next file list.
• When PLAY has been pressed after
displaying the file menu, or when the
disc tray has been closed after pressing
PLAY in step 2, playback begins
automatically starting from the first file.
In this case, if the first file is an MP3/
WMA file, only MP3/WMA files are
played back in order.
If the first file is a JPEG file, the first
JPEG file is played back.
2
Limitations on MP3/WMA/JPEG CD playback
• MP3/WMA/JPEG CD is the disc that is standardized by
ISO9660, its file name must include 3-digits extension
letters, “mp3”, ”wma”, “jpg”.
• The directory and file names of the MP3/WMA/JPEG CD
must be correspond to the ISO standardized files.
• This unit can read 200 files per disc. If one directory has
more than 200 files, it reads up to 200 files, the remaining
files will be omitted.
• The unit is able to recognize up to a maximum of 50
directories per disc.
•MP3/WMA CDs cannot be used for playback for the
purpose of recording.
• As for multi-session disc, only the first session can be
played.
• If the CD has both audio tracks and MP3/WMA/JPEG files,
only audio tracks are played.
• It may take more than one minute for this unit to read MP3/
WMA/JPEG files depending on its structure.
•Music recorded by “Joliet Recording Specification” can be
played back, the file name is displayed (within 16 letters) on
the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System”
(HFS) cannot be played.
• The unit can play back baseline and progressive JPEG files.
Limitations on display
• The maximum number for display is 16 letters. Available
letters for display are the following: capital or small
alphabets of A through Z, numbers of 0 through 9, and _
(under score).
• Other letters than those above are replaced in hyphen.
Notes on MP3/WMA/JPEG files
To play back MP3/WMA/JPEG CD in the recorded order,
1. Use MP3/WMA/JPEG software that records data
alphabetically or numerically.
2. Name each file including two-digit or three-digit number
(e.g. "01" "02" or "001" "002").
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3/WMA/JPEG CDs can not be played back
depending on the recording conditions.
• The CD-R/RW that has no music data or non-MP3/WMA/
JPEG files can not be played back.
MP3/WMA/JPEG CD Information
Notes:
Press STOP to end playback.
• The unit records the stopped point.
“ ” appears on the screen. Press
PLAY to resume playback (from the
scene point).
• If you press STOP again or unload the
disc, the unit will clear the stopped point.
5
▲/▼/ /
1
-
/72
--:--
/0-9/Enter/Play Mode
2
3
4
5
Japan
CD-R
Bay Bridge
CLOSE MY EYES
DIVE TO BLUE
Honey
8
9
10
11
12
flower
Lies and Truth-
winter fall
Rain
Strawberry
6
BLUE EYES
13
Welcome party
7
Blurry Eyes
14
Thailand
Pops
•During MP3/WMA/JPEG-Playback, you can not use SEARCH,
A-B Repeat functions.
•You can use Repeat (Track or All), Random functions and
Program playback for MP3/WMA/JPEG CD Playback. (See
page 52 and 53.)
welcome
Reading
/0-9/Enter/Play Mode
1
-
/72
2
3
4
5
Japan
CD-R
Bay Bridge
CLOSE MY EYES
DIVE TO BLUE
Honey
8
9
10
11
12
flower
Lies and Truth-
winter fall
Rain
Strawberry
6
BLUE EYES
13
Welcome party
7
Blurry Eyes
14
Thailand
Pops
--:--
/0-9/Enter/Play Mode
15
-
/72
16
Mother
CD-R
Hold Your Last
Pops
--:--
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p42-45 11/22/02, 15:4345
46
MP3/WMA/JPEG playback (continued)
You can select your desired JPEG file on the file menu and picture menu.
The selected JPEG file is automatically adjusted to the TV screen. (When the
aspect ratio of the JPEG file is different to your TV screen, the black bar will
appear at the top and bottom, or the both sides of the TV screen.
Advanced playback (DVD)
ENTER
▲/▼//
STOP
PLAY
0-9
INDEX /
OPEN/CLOSE
TOP MENU
JPEG CD playback
1
Press OPEN/CLOSE.
The disc tray will open.
Place a disc on which
JPEG files have been
recorded onto the tray.
Press OPEN/CLOSE or PLAY.
The disc tray closes automatically.
On the TV-screen, “Reading” will appear.
Reading will take
as much time as
the number of file.
A file menu screen will appear on the TV screen.
Press or to select folder.
Press / or / or Number keys to select
the desired file.
To display a picture menu, press MENU.
(To return to a file menu, press TOP MENU.)
Press / or / to select the desired file.
• To display next list, press SKIP or .
• When PLAY has been pressed after displaying the
file menu, or when the disc tray has been closed
after pressing PLAY in step 2, playback begins
automatically starting from the first file. In this
case, if the first file is a JPEG file, the first JPEG
file is played back. If the first file is an MP3/WMA
file, only MP3/WMA files are played back in order.
Press ENTER.
The selected picture appears on the TV
screen.
Press STOP to end playback.
The file menu appears on the TV
screen.
If you want to watch the other file,
repeat steps 4-5.
2
5
3
6
CD
1
-
/36
2
3
4
5
Pic-1
CD-R
Pic-2
Pic-3
Pic-4
Pic-5
8
9
10
11
12
Pic-8
Pic-9
Pic-10
Pic-11
Pic-12
6
Pic-6
13
Pic-13
7
Pic-7
14
Pic-14
Collection
/0-9/Enter/Play Mode/MENU
4
1
-
/36
2
3
4
5
Pic-1
CD-R
Pic-2
Pic-3
Pic-4
Pic-5
8
9
10
11
12
Pic-8
Pic-9
Pic-10
Pic-11
Pic-12
6
Pic-6
13
Pic-13
7
Pic-7
14
Pic-14
Collection
/0-9/Enter/Play Mode/MENU
Notes:
•The picture menu is displayed when the FUJICOLOR CD or
the Kodak Picture CD are played. To display the file menu press
TOP MENU.
•In the case of a CD containing a mixture of MP3, WMA and
JPEG files, the files are played back by selecting them from
the file menu.
Operation
Media type
Folder
File number
Elapsed time
: Indicates MP3 file
: Indicates WMA file
: Indicates JPEG file
File menu information
welcome
Reading
TRACKING/ SET +
TRACKING/ SET –
MENU
2C31101A (E)p46-47 11/22/02, 15:4346
47
Basic playback (DVD)
Setting the JPEG Interval
Advanced playback (DVD)
1
Press SETUP in the stop mode. Press or to
select “Picture”, then press ENTER.
Press or to select “JPEG Interval”.
Press ENTER. Press or to select your de-
sired time, then press ENTER.
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at 5
second intervals.
10 Seconds:
Plays back images in the form of a slide show at 10
second intervals.
15 Seconds:
Plays back images in the form of a slide show in 15
second intervals.
To make SETUP screen disappear, press SETUP.
2
4
3
ENTER
▲/▼//
SETUP
/Enter/Setup/Return
Language Picture Parental OtherSound
CD
You can continuously play back all JPEG files automatically.
After the setting below, start playing the disc on which JPEG files have been recorded.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p46-47 11/22/02, 15:4347
48
Setting the Select Files
1
Press SETUP in the stop mode.
Press or to select “Picture”, then press
ENTER.
Press or to select “Select Files”.
Press ENTER.
Press or to select your desired file type,
then press ENTER.
All:
Displays all files.
Music Only:
Displays only MP3/WMA files.
Pictures Only:
Displays only JPEG files.
3
To make SETUP screen disappear, press
SETUP.
Advanced playback (DVD)
2
MP3/WMA/JPEG playback (continued)
CD
/Enter/Setup/Return
Language Picture Parental OtherSound
4
ENTER
▲/▼//
SETUP
When playing back a CD containing a mixture of MP3, WMA and JPEG files, only MP3/WMA or JPEG files can be displayed on
the file menu.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p48-49 11/22/02, 15:4348
49
Basic playback (DVD)
Zooming (JPEG CD)
Press ZOOM during playback.
Enlarged JPEG images are displayed.
You can make the images even larger
by repeatedly pressing ZOOM.
1
Changing angles (JPEG CD)
ANGLE
Advanced playback (DVD)
ZOOM
CD
This unit will allow you to zoom in on the JPEG image.
1
2
Off
3
CD
Press ANGLE during playback.
Images are rotated 90 degrees to the right.
1
Press ANGLE repeatedly until the desired
angle is selected.
Pressing ANGLE four times returns the image
to its original angle.
•Images are displayed at the
same angle until the disc is
removed.
2
You can display JPEG images rotating at 90 degree intervals.
2
Press / / / to view a different part of the
frame.
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
3
▲/▼/ /
2C31101A (E)p48-49 11/22/02, 15:4349
50
Zooming
12
Press ZOOM during playback.
The centre part of the image will be
zoomed in.
Each press of ZOOM will change the
ZOOM 1 (x 1.3), 2 (x 1.5) and
3 (x 2.0).
▲/▼/ /
Zooming/Locating desired scene
Advanced playback (DVD)
DVD
VCD
This unit will allow you to zoom in on the frame image. You can then make selections by switching the position of the
frame.
1
Press / / / to view a different part of the
frame.
You may move the frame from the
centre position to UP, DOWN, LEFT or
RIGHT direction.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view ( Off).
3
Notes:
•You can select the Pause, Slow or Search playback in the zoom mode.
•Some discs may not respond to zoom feature.
ZOOM
CANCEL
0-9
ENTER
JUMP
DISPLAY
Locating desired scene
DVD
VCD
CD
Use the title, chapter and time recorded on the disc to locate the desired point to play back.
To check the title, chapter and time, press DISPLAY.
1
Press JUMP during playback or stop mode.
Press or to select the “Time”, “Title” or
“Chapter”.
Press Numbered buttons (0-9) to change the
number.
•If you input a wrong number, press
CANCEL.
•Refer to the package supplied with
the disc to check the numbers.
Press ENTER. Playback starts.
•When you change the title,
playback starts from Chapter 1
of the selected title.
• Some discs may not work in the
above operation.
4
2
3
Note:
In case of the Video-CD playback with PBC, the SEARCH MODE does not work.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p50-53 11/22/02, 15:4350
51
Basic playback (DVD)
Marking the Scenes
▲/▼
Advanced playback (DVD)
Returning to the Scenes
1
Press MARKER during playback.
Select the blank Marker using or .
Then press ENTER at the desired scene.
• Repeat this procedure to set
the other 2 scenes.
Press MARKER to remove this display.
Press MARKER during playback or stop mode.
Press or to select the Marker 1-3.
Press ENTER.
Playback starts from the marked
scene.
2
1
3
Marking desired scenes
The unit stores the points that you want to watch again up to 3 points.
You can resume playback from each scene.
2
3
Notes:
Some discs may not work with the marking operation.
The marking is canceled when you
open the disc tray
or turn the power off.
Some subtitles recorded around the marker may fail
to appear.
•
•
•
ENTER
CANCEL
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
DVD
VCD
DVD
VCD
MARKER
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p50-53 11/22/02, 15:4351
52
Repeat playback of Title, Chapter and Track
1
Press PLAY MODE during playback or stop mode.
DVD
Press / or ENTER once or twice to select
“Chapter” or “Title”.
ENTER
▼//
Repeat playback
CD/VCD
Press to select “Repeat”.
Press / or ENTER once or twice to select
“Track” or “All”.
Press PLAY MODE again to make the screen
disappear.
Press PLAY to start Repeat playback.
To resume normal playback, select Repeat “Off”.
3
Note:
Some discs may not work with the repeat operation.
A-B Repeat Playback
1
Press REPEAT A-B during playback.
The start point is selected.
Press A-B RPT again.
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.
A-B repeat playback allows you to repeat material between
two selected points.
2
PLAY MODE
A-B RPT
Advanced playback (DVD)
2
Repeat
/Enter/Play Mode
Off
:
Chapter
:
Repeat
/Enter/Play Mode
Repeat
Title
:
/Enter/Play Mode
Play Mode Off
Repeat Off
/Enter/Play Mode
:
:
Track
Play Mode Off
Repeat
:
:
/Enter/Play Mode
Repeat
Play Mode Off
All
:
:
/Enter/Play Mode
DVD
VCD
CD
A
Notes:
•In A-B repeat mode, subtitles near point A or B may not
appear.
•Repeat playback is not available in multi-angle scenes.
• You may not be able to set A-B Repeat, depending on
the scenes of the DVD.
• A-B repeat does not work with an interactive DVD, MP3/
WMA/JPEG CD and Video CD with PBC.
To resume normal playback
Press A-B RPT again.
“
Off
” appears on the screen.
A B
DVD
VCD
CD
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p50-53 11/22/02, 15:4452
53
Basic playback (DVD)
Program Playback
Press PLAY MODE in the stop mode.
Press or to select Play Mode, then press
or to select program.
Press / or / to select the programming
position. Use Numbered buttons (0-9) to input
the Track numbers.
• To program others, repeat Step 3.
•If you input a wrong number, press
CANCEL.
1
Press / or / to select “Program
Playback”
and press ENTER.
The programmes you selected will start
to playback in the order.
To return to normal playback, select
Play Mode: “Off”.
4
To cancel program playback
Select “Clear” and press ENTER.
• The program is cancelled when
you open the disc tray or turn the
power off.
Program playback/Random playback (CD)
You can arrange the order of tracks on the disc.
VCD
CD
2
3
Random Playback
VCD
CD
Press PLAY MODE in the stop mode.
Press / to select Play Mode, then press
/ to select “Random”.
1
Press PLAY
.
The Random Playback will start.
3
2
Repeat
Play Mode
:
Random
:
Off
/Enter/Play Mode
ENTER
▲/▼//
PLAY MODE
PLAY
0-9
Advanced playback (DVD)
Note:
In playing back the Video CD with PBC, you can not set
Random playback.
Note:
In playing back the Video CD with PBC, you can not set
Program playback.
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p50-53 11/22/02, 15:4453
54
Changing angles/Title selection/DVD menu
Changing Angles
Press ANGLE during playback.
The current angle will appear.
Advanced playback (DVD)
DVD
When playing back a disc recorded with multi-angle facility,
you can change the angle that you are viewing the scene
from.
1
1/9
Press ANGLE repeatedly until the desired angle
is selected.
2
Note:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the DVD.
Title Selection
Press TOP MENU during playback.
Title menu appears on the screen.
Press / or / to select the desired title.
DVD
Two or more titles are recorded on some discs. If the title menu is recorded on the disc, you can select the desired title.
1
Press ENTER or PLAY.
The playback of the selected title will
start.
3
Note:
Depending on the DVD, you may not be able to select the title.
Depending on the DVD, a "title menu" may simply be called a
"menu" or "title" in the instructions supplied with the disc.
2
DVD Menu
Press MENU during playback.
The DVD menu appears on the screen.
• Press MENU again to resume
playback at the scene when you
pressed MENU.
Press / or / to select the desired item.
DVD
Some DVDs allow you to select the disc contents using the menu.
When you play back these DVDs, you can select the subtitle language and sound-track language,etc. using the menu.
1
Press ENTER.
The menu continues to another
screen. Repeat steps 2 and 3 to set
the item completely.
3
2
ANGLE
ENTER
▲/▼//
TOP MENU
DVD/VCR
PLAY
MENU
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p54-57 11/22/02, 15:4454
55
Advanced playback (DVD)
During disc playback press AUDIO.
Press or to select “On”.
1
Changing soundtrack language
1
2
Press AUDIO during playback.
The current soundtrack language will
appear.
Press AUDIO repeatedly until the desired lan-
guage is selected.
The on-screen display will disappear
after a few seconds.
Changing soundtrack language/
Setting surround sound
You can select the language when you play a multilingual disc.
Notes:
• If the desired language is not heard after pressing the
button several times, the language is not recorded on
the disc.
•Changing soundtrack language is cancelled when you
open the disc tray. The initial default language or available
language will be heard if the disc is played back again.
• If desired language is not selected after pressing the
button several times, the language is not recorded on
the disc.
AUDIO
/
In case of VIDEO CD playback
Audio type changes as follows each time you press AUDIO.
Setting surround sound
This DVD/VCR equipped with a “SPATIALIZER VIRTUAL SURROUND”. It can produce the effect of being in a cinema or
a concert hall.
Spatializer® 3-Dimensional Sound Processing provided by
Desper Products. Inc.
Certain audio features of this product manufactured under
a license from Desper Products, Inc., Spatializer® and the
circle-in-square device are trademarks owned by Desper
Products, Inc.
2
To cancel Surround mode:
Follow the left steps 1~2, then press or to select the
“Off” position.
Notes:
•
If the selected language is not recorded on the disc, the
original language will be heard.
• The “SPATIALIZER VIRTUAL SURROUND” is effective
only for the sound of disc.
DVD
VCD
CD
VCD
CD
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p54-57 11/22/02, 15:4455
56
During DVD KARAOKE disc playback, press
AUDIO.
2
On : The primary vocal is output
when it is recorded on the disc.
Off : The primary vocal is not output.
Press or to select “On” or “Off”.
Advanced playback (DVD)
Setting subtitles/Karaoke playback
Turning the subtitles on and off
Press SUB TITLE during playback until “Off”
appears.
When playing back a disc recorded with subtitles, you can turn the subtitles on or off.
SUB TITLE
DVD
Note:
Depending on the DVD, you may not be able to turn
the subtitles on even if they are recorded on it.
Depending on the DVD, you may not be able to turn
the subtitles off.
Off
Changing the subtitle language
Press SUBTITLE repeatedly during playback until
your desired language appears.
The on-screen display will disappear after a few
seconds.
You can select the language when playing back a disc recorded with multi-lingual subtitles.
DVD
Notes:
•Changing subtitle language is cancelled when you open
the disc tray.
• Depending on the DVD, you may not be able to change
the subtitles even if multilingual subtitles are recorded
on it. While playing the DVD, the subtitle may change
when: -you open or close the disc tray -you change the
title.
• In some cases, the subtitle language is not changed to
the selected one immediately.
1
1/32 Eng
2
Karaoke playback
You can turn the vocal on or off recorded on the DVD KARAOKE.
DVD
Notes:
•The vocal output feature is used during playback of
Dolby Digital (multi-channel) recorded DVD KARAOKE
discs. This feature allows you to turn off vocal audio
tracks, or restore them for background accompaniment.
•When playing Karaoke, connect appropriate audio
equipment such as an amplifier to the DVD/VCR.
1
3
▲/▼/ /
AUDIO
Press ▲ or ▼until the KARAOKE symbol ( )
appears.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p54-57 11/22/02, 15:4456
57
Advanced playback (DVD)
Press SETUP in the stop mode or No Disc.
Press or to select “Picture”.
Press or ENTER, then press or to select
“Tv Screen”.
Press or ENTER.
Press or to select your desired screen
type, then press ENTER.
Setting the aspect ratio of TV screen
1
ENTER
▲/▼//
Setting the aspect ratio of TV screen
You can select the aspect ratio for your TV.
The following pages describe the setup/operation in DVD mode.
DVD
RETURN
SETUP
/Enter/Setup/Return
Language Picture Parental OtherSound
2
3
Function setup (DVD)
Function setup (DVD)
You have the following screen sizes to choose from:
4:3 LETTERBOX
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
4:3 PANSCAN
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
16:9 WIDE SCREEN
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
4
Note:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p54-57 11/22/02, 15:4457
58
00:34:56 01:12:33 00:34:56 01:12:33
1/9
Title 1/99
1/8
1/32
Chapter 1/999
Eng DolbyDigital
Eng
Each Press of DISPLAY, the status display of the disc
will appear on the screen and change as follows.
DVD
To make status display disappear, press DISPLAY again.
Setting on screen display
1
Press SETUP in the stop mode or No Disc.
Press or to select “Picture”.
Press or ENTER, then press or to select
“Display”.
Setting on screen display/Status display of disc
DVD
On screen display can be switched on or off when you press the buttons.
Function setup (DVD)
2
/Enter/Setup/Return
Language Picture Parental OtherSound
Press / or ENTER to select “On” or “Off”.
ON: On screen displays appear
when you press the buttons
(factory setting).
OFF: On screen displays do not
appear when you press any
buttons.
To make SETUP screen disappear, press SETUP or
RETURN while the SETUP screen is being displayed.
3
4
Status display of disc
DVD
VCD
CD
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
ENTER
▲/▼//
RETURN
SETUP
DISPLAY
AUDIO CD
VIDEO CD
34:56 71:33
Track 11/99
Tv Screen
Display Off
4:3
/Enter/Setup/Return
Language Picture Parental OtherSound
JPEG Interval
Select Files All
Off
Tv Screen
Display 4:3
/Enter/Setup/Return
Language Picture Parental OtherSound
On
JPEG Interval
Select Files All
Off
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p58-59 11/22/02, 15:4458
59
Function setup (DVD)
Dynamic Range Control
Press SETUP in the stop mode.
Press or to select “Sound”.
Press or ENTER to select “DRC”.
Press or ENTER, then press or to select
desired setting.
Max: Full dynamic range is
increased.
Std: Full dynamic range is
maintained.
Min: Dynamic range is reduced.
1
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
4
Dynamic Range Control
DRC (Dynamic Range Control) enables you to control the dynamic range so as to
achieve a suitable sound for your equipment. ENTER
▲/▼//
RETURN
SETUP
DVD
/Enter/Setup/Return
Language Picture Parental OtherSound
2
DRC
Std
/Enter/Setup/Return
Language Picture Parental OtherSound
3
DRC
Max
Std
Min
/Enter/Setup/Return
Language Picture Parental OtherSound
Std
Notes:
•This function works only during playback of Dolby Digital
recorded discs.
•The level of Dynamic Range Reduction may differ
depending on DVD video disc.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p58-59 11/22/02, 15:4459
60
Parental control setting
Some discs are specified not suitable for children. Such discs can be limited
not to play back with the unit.
Parental control setting
Press SETUP in the stop mode or No Disc.
Press or to select “Parental”. Then press
or ENTER.
Press or to select “Parental”, then press
or until the level you require appears.
•Level Off : The parental control
setting does not function.
• Level 8 : All DVD software can
be played back.
• Level 1 : DVD software for
adults cannot be
played back.
•Select from the level 1 to level 8. The
limitation will be more severe as the
level number is lower.
Press or to select “Password”.
Press number buttons (0-9) to input a 4-digit password.
Be sure to remember this number!
• If you input a wrong number,
press CANCEL.
DVD
Function setup (DVD)
1
2
3
Press ENTER to store the password.
Note: Now the rating is locked and the
setting cannot be changed unless you
enter the correct password.
Press SETUP or RETURN to remove the paren-
tal control screen.
4
5
Notes:
•If each setup (P. 57~66) has been completed, the
unit can always be worked under the same
conditions (especially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult." For
those discs, the age restriction will not work.
ENTER
▲/▼//
RETURN
SETUP
0-9
CANCEL
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4460
61
Function setup (DVD)
To change the parental level
1
2
Press SETUP in the stop
mode or No Disc.
Press
or to select “Parental”.
Then press or ENTER.
Press number buttons (0-9) to enter the
password you have stored.
Press ENTER.
The rating is now unlocked.
Press or to select “Parental”, then press
or to change the parental level.
To change the parental level
DVD
Note:
Do not forget the password. If you forget the password,
contact the dealer that you purchased the unit from.
3
4
Press or to select “Password”, then press
number buttons (0-9) to enter the password.
Note: You can change the password
if you want.
Press ENTER.
Now the parental level is changed and
locked.
Press SETUP or RETURN
to remove the parental control screen.
5
6
7
ENTER
▲/▼//
RETURN
SETUP
0-9
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4461
62
Temporary disabling of rating level by DVD disc
Depending on the DVD disc, the disc may try to temporarily cancel the rating
level that you have set.
It is up to you to decide whether to cancel the rating level or not.
Temporary disabling of rating level by DVD disc
Load a DVD disc and press PLAY or OPEN/
CLOSE on the unit (see P. 42).
If the DVD disc has been designed to temporarily
cancel the Rating level, the screen which follows
the “Reading” screen will change, depending on
which disc is played. If you select “YES” with the
ENTER key, “Your disc exceeds The parental
control level#.” screen will then appear.
If you wish to cancel the set rating level temporarily,
select “Parental Control Level” with or , then
press ENTER. If the 4-digit password at step 2 on
P.61 has been set, the password entering screen
will appear as shown in step 4.
Alternatively, if the password has not been set,
playback will commence. If you don’t know (or have
forgotten) the password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
Note:
This temporary cancellation of rating level will be kept until
the disc is ejected.
When the disc is ejected, the original rating level will be set
again automatically.
Function setup (DVD)
DVD
1
Enter the password with number buttons (0-9).
Then press ENTER.
If you interrupt the entering, press
RETURN.
Playback will commence if the entered
password was correct.
4
2
Your disc exceeds
the parental control level#.
Parental Control Level
Cancel Picture
/Enter/Return
3
5
ENTER
▲/▼
RETURN
PLAY
0-9
OPEN/CLOSE
welcome
Reading
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4462
63
Function setup (DVD)
Setting setup language
Press DVD/VCR to select the DVD mode.
“Reading” changes to “No Disc”.
(If DVD disc has already loaded, the
playback will start automatically.)
Press SETUP in the stop mode.
Press or to select “Other”.
Press or ENTER to select “OSD Language”.
DVD
VCD
CD
1
welcome
Reading
Language Other
/Enter/Setup/Return
Picture ParentalSound
2
3
Language
OSD Language English
Other
/Enter/Setup/Return
Picture ParentalSound
Press or ENTER and then press or to
select desired language (e.g. English), then
press ENTER.
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
4
5
Language
OSD Language English English
Francais
Espanol
Other
/Enter/Setup/Return
Picture ParentalSound
If the unit does not operate properly: Static electricity,
etc., may affect the player's operation. Disconnect the
AC power cord once, then connect it again.
DVD/VCR
ENTER
▲/▼//
RETURN
SETUP
Setting setup language
The setup language can be selected.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4563
64
Function setup (DVD)
Setting menu language
1
Press SETUP in the stop mode or No Disc.
Press or to select “Language”.
Press or ENTER, then press or to select
“Menu”.
Press or ENTER.
Press or to select your desired language,
then press ENTER.
English, Francais, Espanol
The selected language is the first-
priority Menu language.
Other: Other language can be
selected (See the Language code list
on page 67).
ENTER
▲/▼//
Setting menu language
You can select the language of the disc menu messages of DVDs.
DVD
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
4
RETURN
SETUP
2
3
/Enter/Setup/Return
Language Picture Parental OtherSound
Language Picture Parental OtherSound
Menu
Subtitle
Audio
English
Automatic
English
/Enter/Setup/Return
Menu
Subtitle
Audio
English
Automatic
English Francais
English
Espanol
Other
/Enter/Setup/Return
Language Picture Parental OtherSound
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4564
65
Function setup (DVD)
Changing subtitle language
1
Press SETUP in the stop mode or No Disc.
Press or to select “Language”.
Press or ENTER, then press or to select
“Subtitle”.
Press or ENTER.
Press or to select your desired language,
then press ENTER.
English, Francais, Espanol
The subtitle is displayed with the selected
language if it is recorded on the disc.
Other:
If you want to select another language, enter
the language code (see the language code
list on page 67).
Automatic:
•The unit will automatically select the
same language in the AUDIO setting.
•When the unit selects the same
language as the
AUDIO, the subtitles
will not appear during playback.
•When you do not use the same
language as
the AUDIO, the subtitles
will appear during playback.
Off:
Subtitles do not appear.
DVD
2
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
4
ENTER
▲/▼//
RETURN
SETUP
Note:
If the selected language is not recorded on the disc, the first-
priority language is selected.
Menu
Subtitle
Audio
English
Automatic
English
/Enter/Setup/Return
Language Picture Parental OtherSound
/Enter/Setup/Return
Language Picture Parental OtherSound
3
Menu
Subtitle
Audio
English
Automatic
English Francais
English
Espanol
Other
Automatic
Off
/Enter/Setup/Return
Language Picture Parental OtherSound
Changing subtitle language
The same subtitle language can
always be selected even if you replace the disc
or turn the power off.
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4565
66
Setting audio soundtrack language
Press SETUP in the stop mode or No Disc.
Press or to select “Language”.
Press or ENTER, then press or to
select “Audio”.
Press or ENTER.
Press or to select your desired Audio
Language, then press ENTER.
•English, Francais, Espanol:
The language you have selected
will play if it is recorded on the disc.
• Other: If you want to select
another language, enter the
language code (See the Language
code list on page 67).
• Original: The unit will select the
first priority language of each disc.
1
To make SETUP screen disappear, press SETUP
or RETURN while the SETUP screen is being
displayed.
4
Setting audio soundtrack language
The same audio soundtrack language can always be selected by your unit even if
you replace the disc or turn the power off. ENTER
▲/▼//
RETURN
SETUP
DVD
2
3
/Enter/Setup/Return
Language Picture Parental OtherSound
Language Picture Parental OtherSound
Menu
Subtitle
Audio
English
Automatic
English
/Enter/Setup/Return
Menu
Subtitle
Audio
English
Automatic
English Francais
English
Espanol
Other
Original
/Enter/Setup/Return
Language Picture Parental OtherSound
Note:
If the selected language is not recorded on the disc, the
original language will be heard.
Function setup (DVD)
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
TRACKING/ SET +
TRACKING/ SET –
2C31101A (E)p60-67 11/22/02, 15:4566
67
Function setup (DVD)
Language code list
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE" (see pages 64-66).
Language code list
Abkhazian 1112 Fiji 1620 Lingala 2224 Singhalese 2919
Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921
Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922
Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925
Amharic 1123 Galician 1722 Malay 2329 Spanish 1529
Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931
Armenian 1835 German 1415 Maltese 2330 Swahili 2933
Assamese 1129 Greek 1522 Maori 2319 Swedish 2932
Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022
Azerbaijani 1136 Guarani 1724 Moldavian 2325 Tajik 3017
Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011
Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030
Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015
Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018
Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225
Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019
Bulgarian 1217 Indonesian 1924 Pashto, Pushto 2629 Tonga 3025
Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028
Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021
Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033
Catalan 1311 Japanese 2011 Quechua 2731 Ukrainian 3121
Chinese 3618 Javanese 2033 Rhaeto-Romance 2823 Urdu 3128
Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136
Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219
Czech 1329 Kazakh 2121 Samoan 2923 Volapük 3225
Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335
Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325
English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418
Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019
Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525
Faroese 1625 Latvian, Lettish 2232 Sindhi 2914 Zulu 3631
Language Name Code Language Name Code Language Name Code
Language Name Code
Others
2C31101A (E)p60-67 11/22/02, 15:4567
68
Others
Before calling service personnel
Check the following guide for the possible cause of a problem before contacting service.
SYMPTOMS POSSIBLE SOLUTIONS
•Make sure the power cord is plugged in.
•Try another AC outlet.
• Power is off, check fuse or circuit breaker.
•Unplug unit, then plug it back in.
•Select the DVD or VCR mode before operating.
DVD/VCR does not operate.
DVD/VCR
PAGE
5
–
–
5
30,42
The remote control does not function.
• Aim at the remote control at the remote sensor.
• Operate within Approx. 7 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
13
DVD
No picture.
• Antenna connection is not correct or antenna cable is disconnected.
• The video channel is not in the correct position or the TV is not set to the video
channel 3 or 4.
• Check the unit is connected correctly.
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
equivalent).
• Channel is set to the external mode.
No sound. • Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
14~17
22
14~19
–
–
14~19
–
31,34
•Select proper language in the menu options.Display is not shown in your language. 63
Playback doesn’t start. • No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
Stopping playback, slow-motion play, repeat
play, or memory play, etc. cannot be
performed. • Some discs may not do some of the functions.
42
42
42
–
No CATV reception. • Check all CATV connections.
•Station or CATV system problems, try another station. 16,17
Noise bars on screen.
• Tracking adjustment beyond range of automatic tracking circuit. Try Manual tracking
adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
VCR
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
TV recording does not work. 29,34
Timer recording does not work. • The time is not set correctly.
• The recording start/end time is not set correctly.
• The TIMER has not been pressed ( is not lit).
24
37
37
31
31
–
No subtitle. • Some discs have no subtitles.
• Subtitles are cleared. Press SUB TITLE.
Angle cannot be changed. • Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
appears on the screen.
56
54
44
No 4:3 (16:9) picture. • The setup does not match your TV.
No on-screen display. • Select Display “On”.
57
58
No surround sound. • The setup does not match your stereo system.
The unit or remote operation key is not
functioning. • Turn off the unit and unplug the AC power cord for several minutes, then replug it.
20
Playback does not start when the title is
selected. • Check the Parental setup.
Audio soundtrack and/or subtitle language
is not changed when you play back a DVD. • Multilingual language is not recorded on the DVD disc.
–
60,61
65,66
Symptoms and correction
2C31101A (E)p68-BACK 11/22/02, 15:4568
69
Others
AC 120V 60Hz
Operation: 16W, Stand by: 2W
7.9lbs (3.6 kg)
Width : 16-15/16 inches (430 mm)
Height : 3-7/8 inches (99 mm)
Depth : 9-7/8 inches (251.5 mm)
181 channel freq. synthesized
VHF 2-13
UHF 14-69
CATV 125 Channels
UHF/VHF In/Out : 75 ohm coaxial
Channel 3 or 4, Switchable
NTSC
4 Rotary heads
Hi-Fi sound - 2 Tracks / MONO sound - 1 Track
20Hz to 20,000Hz
More than 90dB
Approx. 1minute and 48 seconds (with T-120 Cassette Tape)
DVD (12cm, 8cm), CD (12cm, 8cm)
DVD linear sound: 48 kHz sampling 4Hz-22kHz
96 kHz sampling 4Hz-44 kHz
90dB (DVD)
0.02% (DVD)
Below measurable level (DVD)
Temperature: 5˚C-40˚C (41˚F-104˚F), Operating status: Horizontal
Power supply
Power consumption
Weight
Dimensions
Tuner
Antenna input/output
RF channel output
Color system
Video head
Audio track
Hi-Fi frequency response
Hi-Fi dynamic range
F.FWD/REW time at 25˚C (77˚F)
Applicable disc
Frequency range
S/N ratio
Harmonic distortion
Wow and flutter
Operating conditions
Specifications
General / input / output / supplied accessories
GENERAL
Input/Output
DVD/VCR
Video input 1.0 V (p-p), 75 Ω, negative sync., pin jack x 2
Video output 1.0 V (p-p), 75 Ω, negative sync., pin jack x 1
Audio input –8dBm, 50kΩ, negative sync., pin jack (L/R) x 2
Audio output –8dBm, 1kΩ, negative sync., pin jack (L/R) x 1
DVD
S video output (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin × 1
(C) 0.286 V (p-p), 75 Ω
Component video output (Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack × 2
Audio output (BITSTREAM/PCM 0.5V (p-p), 75 Ω, pin jack × 1
COAXIAL)
Audio output (BITSTREAM/PCM Optical connector × 1
OPTICAL)
Audio output (ANALOG) –12dB, 1kΩ, pin jacks (L, R) × 1
Supplied accessories
Audio/video cable ................................................. 1
Remote control (SE-R0088) ................................. 1
Batteries (AAA) ..................................................... 2
75 ohm coaxial cable ............................................ 1
• Designs and specifications are subject to change without notice.
2C31101A (E)p68-BACK 11/22/02, 15:4569
70
Others
LIMITED WARRANTY DVD VIDEO PLAYER
Toshiba America Consumer Products, Inc. (“TACP”), Toshiba Hawaii (“THI”) and Toshiba Canada Limited (“TCL”) make the
following limited warranties. These limited warranties extend to original purchaser or any person receiving this set as a gift
from the original purchaser and to no other purchaser or transferee.
Limited Ninety (90) Day Warranty
TACP/THI warrant this product against defects in materials
or workmanship for a period of ninety (90) days after the
date of original retail purchase. During this period, TACP/
THI will repair or replace a defective product or part, at their
option, with a new or refurbished product or part without
charge to you. You must deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Limited One (1) Year Warranty
TACP/THI further warrant the parts in this product against
defects in materials or workmanship for a period of one (1)
year after the date of original retail purchase. During this
period, TACP/THI will repair or replace a defective product
or part, at their option, with a new or refurbished product or
part without charge to you, except that if a defective part is
replaced after ninety (90) days from the date of the original
retail purchase you pay labor charges involved in the
replacement. You must also deliver the entire product to a
TACP/THI Authorized Service Station. You are responsible
for all transportation and insurance charges for the unit to
and from the Authorized Service Station. If you live in the
U.S.A. you may, at your option, return your DVD Unit to:
Toshiba America Consumer Products Inc.
Returns Center
1420C Toshiba Dr.
Lebanon, TN 37087
Upon receipt we will, at our option, exchange the DVD Unit
with a new or refurbished unit. Canadian Consumers are
requested to contact TCL. In Hawaii consumers are
requested to contact THI.
Rental Units
The warranty for rental units begin with the first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited
ninety (90) day warranty for all parts and labor.
Owner’s Manual
You should read the owner’s manual thoroughly before
operating this product. You should complete and mail the
enclosed Demographic card within ten (10) days after you,
or the person who has given you this product as a gift,
purchased this product. This is one way to enable TACP to
provide you with better customer service and improved
products. Failure to return the card will not affect your rights
under this warranty.
Your Responsibility
The above warranties are subject to the following
conditions:
(1) You must retain your bill of sale or provide other proof of
purchase.
(2) You must notify a TACP/THI/TCL /Authorized Service
Station within thirty (30) days after you discover a
defective product or part.
(3) All warranty servicing of this product must be made by a
TACP/THI/TCL Authorized Service Station.
(4) U.S.A. warranties are effective only if the product is
purchased and operated in the Continental U.S.A. or
Puerto Rico.
(5) Labor service charges for set installation. Set up,
adjustment of customer controls and installation or
repair of antenna systems are not covered by this
warranty. Reception problems caused by inadequate
antenna systems are your responsibility.
(6) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
product or parts which have been lost or discarded by
you or to damage to products or parts caused by
misuse, accident, damage caused by Acts of God, such
as lighting or fluctuations in electric power, improper
installation, improper maintenance or use in violation of
instructions furnished by us; or to units which have
been altered or modified without authorization of TACP/
THI/TCL or to damage to products or part thereof which
have had the serial number removed, altered, defaced
or rendered illegible.
(7) Should you elect to return your DVD Unit to TACP after
the ninety (90) days and within one (1) year, or after the
warranty period has expired: Call (800)-631-3811 to
receive information concerning an exchange price.
Payment must be enclosed with product in the form of a
certified check or money order including reason for
return.
(8) Physically damaged DVD Units are not acceptable for
repair or exchange whether in or out of warranty and
will be returned as received.
(Continued)
70
OthersOthers
2C31101A (E)p68-BACK 11/22/02, 15:4570
71
Others
How to Obtain Warranty Service
(1) Refer to the troubleshooting guide in your owner’s manual. This check list may solve your problem.
(2) In the U.S.A., only call the TACP toll free number 800-631-3811, or if in Hawaii or Canada see listing below within (30)
days after you find a defective product or part.
(3) Arrange for the delivery of the product to the TACP/THI/TCL Authorized Service Station or TACP Return Center.
Products shipped to the Service Station must be insured and safely and securely packed, preferably in the original
shipping carton, and a letter explaining the defect and also a copy of the bill of sale or other proof of purchase must be
enclosed.
In Hawaii contact:
Toshiba Hawaii Inc.
327 Kamakee Street
Honolulu, HA 96814
(808)-521-5377
In Canada contact:
Consumer Electronics Group
191 McNabb Street
Markham, Ontario L3R 8H2
(905)-470-5400
Consumer Electronics Group
22171 Fraserwood Way
Richmond, B.C. V6W 1J5
(604)-303-2500
Consumer Electronics Group
18050 Trans canada
Kirkland, Quebec H9J 4A1
(514)-390-7766
Toll Free
800-631-3811
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are
expressly limited to the duration of the limited warranties set forth above. With the exception of any warranties implied by state
law as hereby limited, the foregoing warranty is exclusive and in lieu of all other warranties, guarantees, agreements and
similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no event shall TACP/THI
be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in
any manner whatsoever. The time within which an action must be commenced to enforce any obligation of TACP/THI arising
under the warranty or under any statute, or law of the United States or any state thereof, is hereby limited to ninety (90) days
from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties arising
under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some
states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or the exclusion or
limitation of incidental or consequential damages, so the above provisions may not apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward
this completed form with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty. Product
must be purchased from an Authorized Canadian Dealer. Products purchased in the U.S.A. and used in Canada are not
covered by these warranties.
IMPORTANT: PACKING AND SHIPPING INSTRUCTION
When you send the product to a Service Station, you must use the original carton box and packing material, then insert the
original carton box containing the unit into another carton using more packing material.
LIMITED WARRANTY DVD VIDEO PLAYER (continued)
In the Continental United States contact:
71
2C31101A (E)p68-BACK 11/22/02, 15:4571
Printed in ThailandJ2C31101A U
03/01
2C31101A (E)p68-BACK 11/22/02, 15:4572