ORION ELECTRIC M2D8B DVD/VCR TV Interface Device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	426519
Application ID	vUPxa+QMngmmh0j1TAKRFA==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	166.48kB (2080992 bits)
Date Submitted	2004-05-28 00:00:00
Date Available	2004-05-28 00:00:00
Creation Date	2004-05-26 13:16:35
Producing Software	Acrobat PDFWriter 4.0 Windows
Document Lastmod	2004-05-27 19:18:11
Document Title	]
Document Creator	J2D80701A.pdf [ 19/72 ]
Document Author:	mhashimoto

— VCR DVD
QI‘imer recording
Timer recording can be programmed onscreen with the remote control.
The built-in timer allows automatic unattended recording ol up to 3
programs within 1 month.
7 CANCEL
Timer recording
Preparatlon: To enter other programs, repeat step 2
- Press VCR DVD selectorto select the VCR mode. through 4.
. mafia cassette tape With the erase prevention tab vcn MENU , To Mum to the nonnal screen.
' _ 7 SETUP press VCR MENU twice.
- Check the time and date are correct gm (3
Example: Progmm a timer recording lorthe 26m day, 335i fififihfiw
channel 125 (Cable TV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
1:
Press VCR MENU. Select “TIMER REC SET", {Manifest-torment] 3
then press ENTER. ‘ ) g:
_ Q
v R MEN Press TIMER REC. The timer symbol (El) »-<~
cSETUP U l appear on the dlsplay and the VCR stands by g
D for recording. '
4? TIMER REC At the same time, VCR mode will
0 change to DVD mode automatically.
You can use DVD even if the VCR is
Press SET + or - to select one of the program in the timer recording mode.
line, then press ENTER. If you do not use the DVD. turn the
— power oii.
é Notes:
| ' The timer recording will start at 5 seconds before the time
@ you predetermined.
é - lithe timer symboli E} i does not appear on the display in
spite of the pressing of TIMER REC, the cassette may not
have been loaded. 5
~ it the cassette is ejefieo in spite ol the pressing of TIMER
REC. the erase prevention tab of the cassette may have
Press SET + or - to select the date. then press
ENYER- been removed.@
<5
Notes:
i @ - it the timer symbol (El) blinks when the timer recording ended,
é the TV program has not been completely recorded because of
an insufficient tape length. Press TIMER REC tU cancel the
timer program or press EJECT to remove the cassette tape.
se' me mm "me, end "me, shame. and lime - During timerrecording standby mode. the VCR mode cannotbe
speed as in step 3 operated. To usethe VCR. press TIMER REC attirst.then press
' VCR DVD selector to change to VCR made. After you use the
VCR, press TIMER REC again to put the VCR into timer
recording standby mode.
- li you press TIMER REC during timer recording, the recording
operation will be interrupted. it you press TIMER REC again
within the programmed time. the recording operation will start
again.
- After a power failure or disconnection at the power plug. all
, Press CANCEL (0 move cursor backward for sensation. programmed recording settings and time display will be lost
~ To record from external source set the channel to “L1" or “PO" resumption O'lmwe'» lrlihiscaser resellhe clock 2) and
“L2'. reprogram any timer recording.
Notes:
37
7‘ ‘ J2D80701A(Eip32-37.p65 37 , isemaisw ‘ if
f” J2 TorAlErvas-npes as
Recording (VCR)
QTimer recording (continued)
— CANCEL
To set daily/weekly timer
Weekly (e.g. wKL-TU: each Tuesday) or daily (e.g. M0-
SA: Monday to Saturday) Tlmer recording
Follow the procedure oi tlmer recording on the previous
page. At step 3 press SET 1» or — repeatedly until the
desired setting appears. Then press ENTER.
When you press SET- repeatedly. lhe
DATE rndrcatorwill change as lollows. in
this case the day is Fnday.
The current day (Friday) —> SU-SA lSunday to Saturday)
One month later MOfA (Monday to Saturday)
minusfne day MO»FR (Monday to Friday)
WKL-WE <—
(Weekly Wednesday)
WKL-TH (Weekly Thursday)
Do not overlap timer programs as portions ol the
contlicting programs will be lost. The llrst recording
time has priority over the next recording time as shown
in the diagram below.
3:00 9 on to zoo ll zoo
Program I —>
Progrernz ->
Deleted Parts-x
Programs —> —:
Von Recorded one were
Fleoordlng ProgJ Prcgz erode
Control Settings _.
Notes:
~ The daily/weekly recording can be made oonlmuously until the
recording is canceled ortne tape reaches the end.
~ During timer recording the automate rewmding mechanism
does not lunmion.
38
To confirm or cancel a program
If the Timer has been activated, press TIMER
REC to deactivate the Timer.
The trmer symbol (93) will
disappear. Then press VCR DVD
selector to change to Visa mode.
VCR
TIMER REC DVD
00
2 To confirm Timer program:
At step 1 on the preVlous page select “TIMER REC
SET“ and press ENTER
The timer program Ilsl Will appear on the screen.
_ we \srARr Btu! w /
_zsistJ) “common-rm..-
z- \
are.)
leMbflEthMCEWEM-l)
3 To cancel Tlmer program:
Press SET 6 or— to select the unwanted program,
then press CANCEL to cancel the program.
we \srlm rain! at /
CANCEL
screen is cleared.
vcn MENU
SETUP
4 Press VCR MENU repeatedly until the menu
C)
Notes:
- ll more are other limer record programs remaining TIMER
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
- You cannot oonlirm lhe Tlmcr program during limer recording
operation.
- ch can correct or cancel a programmed setting in program
confirm mode
team, a so PM
-DI @ mil l
other functions (VCR)
QStereo recording and playback/
Second Audio Program (SAP)
— AUDIO SELECT
— CANCEL
Stereo recording and playback Second Audio Program (SAP)
The VHS Hi-Fi audio system permits high lidelity record- Your DVD/VCR is titted with a SAP broadcast system which
ing ot MTS STEREO TV broadcasts. enables you to switch to a second audio program when
viewing a selected channel.
Zilsfins fe’é'ie-Ii-vseg-Egfiggégem] This lunction applies only when the program is broadcast
appeammhe “tree" foraboum lr| mum-languages through the SAP broadcast system.
seconds and the program can
beviewed or recorded in stereo. P7355 VCR MENU- Then press SET * 0" - ‘0
The Hi-Fi stereo recording pro- select “SAP”.
cedure is the same as lor normal
recordings. ch MENU _,. "rials...
Note: SETUP C)
When using aCabIe TV system. stereo TVprograms may D “M“ “m
be transmitted over a mono cable d’tannel. In this case
“STEREO" will not appear and the sound will be in mono. (Mannheim 9
AUDIO SELECT 03;-
Aunro E 4
@ 2 Press ENTER to select “ON". E 49?»
Then press VCR MENU until the o"
Output selection menu screen is cleared. 43
When viewing an MTS stereo TV program. or playing a g
prerecorded VHS Hi-Fi stereo videotape, press AUDIO 7 VCR MENU “M 3
SELECT to select how the audio will be heard through saw, lrluzhazcszr
the speakers. Normally set to the Hl-Fi stereo position.
this button can be set to the MONO position ii the stereo D “Winn";
broadcast or videotape audio is 0! poor quality. The “R'
and “L" positions allow the audio lrom the Right or Lel't Hi- 7 ,.,,,g..|m.ym)
Fi channel to be heard over both TV speakers. This
button has no ellect when viewing a MONO videotape or
TV program. Each time when you press the button.
OUTPUT SELECTION display appears on the screen ior “519mm to SAP
several seconds. Reler to the chart below. _ _ _
When the VCR rs turned on or a channel selection rs
OUTPUT SOUND HEAFlD ON BOTH made. make certain the letters “SAP" appears on the
SELEcmN SPEAKERS screen tor about 4 seconds. This means that the “Second
STEREO STEREO Audio Program broadcasting rs available.
LCH LEFT CHANNELAUDIO
FlCH FlIGHT CHANNELAUDIO
mono MONO 5“
Notes:
- When playing back a tape that is not recorded in Hi-Fi stereo
mode. the audio will automatically be monaural.
. When listening to a VHS Hl'FI video tape or MTS broadcast
throughthe VHF/UHFjack (AudioNideo cable not connected).
the sound will be monaural
39
7‘ ‘ cheoroiAiEwas-Aipes as , IQSNJAJJSPM ‘ if
other tunctions (VCR)
”(gDuplicating a video tape
It you connect the DVD/VCR to another VCR or Camcorder. you can duplicate
a previously recorded tape. Make all connections belore turning on the power.
Duplicating a video tape
Preparation:
Connection with second VCR
. Turn ON the TV and select the corresponding video
input. Playback VCR
- Press VCR DVD selector to select the VCR mode.
(The VCR indicator will light.)
. Load a cassette tape with the erase prevention tab
intact. O
- Load a previously recorded tape into the playback if? 0
VCR or Camcorder. u~ ' ' '
ToVIDEOOUT Q)?— ToAUDIOtRjouT
Press SPISLP to select the desired tape speed ‘ ToAUDIO (L) our
SP or SLP.
”if/fig“ n is recommended that you set the
tape speed to the SP mode on the
o recording VCR lor best results.
Press INPUT SELECT once or twice to select
AUDIONIDEO input position.
“L1 " or “L2" will appear in the display,
AUDIO/VIDEO cable lsuDDlled)
Flecnrdmg VCR
t:|
To VIDEO IN WT" AUDIO lR) IN
To AUDIO 1L) IN
INPI" SELECT
Pmcmlvz
O H
L1: on the rear panel
L2: on the lront panel
Connection with Camcorder
Playback Camcorder
3 Press PLAY an the playback VCR or Camcorder.
To Av Jack
m;—
4 Press REC/OTR on the recording VCR. Rewrdmg Von
The duplicating process begins.
IE
RECJOTR
It Deco: a
{A ~ To AUDIO (R) IN
oAUDIO (L) IN
To VIDEO IN AUDIO VIDEO mole lnol suppllsd)
Press STOP after duplicating a video tape.
For duplicating a previously recorded tape from a
camcorder. follow the camcorder manulacturer's
instructions. A typical camcorder dubbing hookup is
shown above.
40
7‘ ‘ J2 vorAlElpas-npes Ac reamusm ‘ If
QRecording a DVD/CD disc
You can record disc material in DVD. Audio CD. etc. onto aVideo
tape with this DVD/VCR.
Duplicating a DVD or CD disc
Preparatlo
. Turn ON the TV and select the corresponding video
input.
- Press VCR DVD selector to select the VCR mode.
(The VCFt indicator will light.)
. Load a cassette tape with the erase prevention tab intact,
r Load a DVD/CD disc.
Press SPISLP to select the desired tape speed
SP or SLP.
SPISL
PLAV MJDE
CD
2 Press VCR DVD selector to selecflhe DVD mode.
The DVD indicator will light.
VCR
DVD
0-
3 Press PLAY to start playback.
4 Press REC/OTB to start recordlng.
The DVD/VCR will change to the
VCR mode automatically and the
playback picture or sound will be
duplicated on the video cassette
tape.
REC/OT“
5 Press STOP it you finish recording.
It you wish to stop a DVD/CD disc,
press vcn DVD selector to change
the DVD mode lhen press STOP.
7‘ ‘ szewom lElnas-Alpes At
Notes:
' You may not be able to record the beginning of the disc.
Begin vcn recording onoe program playback oommenoes
on the DVD.
- When the scanning models set to the progressive mode,
you cannot duplicate a dISC material onto a video tape.
When RECIOTR is pressed the PROGRESSIVE indicator
= P " on the display window will llash and “Please Set
Oll’ will appear on the screen.
' You cannot record discs encoded with copy guard
lunclion, The lollowing icon and text Will show up on the
TV screen.
lei-w»
DlSC IS COPY PROTECTED
41
reset, 3 so PM
='
fir
l -EED e [Ii—ZEUS
Basic playback (DVD)
' . . CAUTION
QPlaymg a drsc Keep your fingers well clear ol the disc tray as it is closing.
This section shows you the basics on how to play a disc. Neglectlrtg m do so may cause serious personal anury.
4 3,5
tJLlfi
Displaywindow 2 STOP PLAY
525 Basic playback
Preparatlons:
~ When you want to view a disc, turn on the TV and select the corresponding video input connected to the DVD/VCR. This
may include S-video or component video inputs which are exclusive to DVD playback.
~ When you want to enjoy the sound at discs trorn the audio system. turn on the audio system and select the input
connected to the DVD/VCH.
Press ems-muggy (| /(_l))_ 5 Press OPEN/CLOSE or PLAV on the unit.
“WEN” The DVDNCR turns on. The disc tray closes automatically.
(no) PLAY On the TV-screen. “6" changes to
on : ‘Reading" and then playback
sea commences.
2 Press VCR/DVD SELECT 10 select the DVD mode.
VCR/DVD The DVD indicator will light.
- Amenu screen will appear on the TV screen, it
the disc has a menu feature.
morn,
SELECT
3 Press OPEN/CLOSE.
cvsuctose The disc tray opens.
as
i< ‘ \’\‘ T
V G)
é é
7 Press ENTER
Place the dlsc on the dlsc tray. * - Title is selected and play
commences.
With the playback
side down
8 Press STOP to end playback.
STOP . The unit records the stopped point,
depending on the disc. “n"
® appears on the screen. Press
PLAV to resume playback (lrom
. There are two dillerent dlso sizes. Place the disc
in the correct guide on the disc tray. If the disc is "16 Scefls win!)-
out of the guide, it may damage the disc and . Il you press STOP again or unload
cause the DVDNCR to maltunction. the disc (“ I ' appears on the
. Do not place a disc which is unplayable in this screen), the unit will clear the
DVD/VCR stopped point.
I To start playback in the stop mode
Press PLAY.
my
6)
42
7‘ ‘ J2 rotAleAz-As.pos 12 , teamaasm ‘ if
r\ I To obtain a higher quality picture
7 VCR DVD Occasionally, some picture noise not usually visible during a normal broadcast
oooe—— OPEN/CLOSE may appear on the TV screen while playing a DVD Video disc because the high
9292 resolution pictures on these discs include a lot of information. While the amount or
noise depends on the TV you use with this DVDNCFt. you should generally
reduce the sharpness adjustment on your TV when viewing DVD video discs.
. * PLAY - About Efifi;
_ PAUSE/STILL The ®®- icons on the heading bar show the playable discs forthe
— STOP lunction described under that heading.
® :You can use this lunction with DVD video discs.
7 ENTER ® :You can use this lunction with woeo CDs.
:You can use this lunction with Audio CDs and CD-R/RW CDs.
I To pause playback (still mode) I Playing a Disc while the VCR section is
Press PAUSE/STILL during playback. recording or standing by tor timer recording
1) Start to record.
PAUSE/STILL Eergarcebzgrorgal playback. press Follow steps 1~5 on page 34.
- It the DVDNCR is standing by tor recording. turn on
~ The sound is muted during still the DVDNCH.
mode. 2) Press VCR DVD selector to select DVD mode. The
- To stop playback 3) EEEAngilscstor wtll light.
P'ess STOP- Follow steps 3 ~ 5 on page 42.
- Press PLAY it the DVD/VCR does not start to play a
disc automatically.
4) Stop to play.
. To remove We disc Press STOP to stop play back a disc.
Press OPEN/CLOSE. .
_ _ l Screen saver tunctlon
OPEN’CLOSE Remove the disc after the disc tray The screen saver operates when you leave the unit in
® opens completely. DVD stop mode tor about five minutes. 9
The screen will repeatedly get dark gradually and back 5.
to normal. 1
I To turn on the PBC g
Press number button 1 in the stop mode. then press 3
ENTER. 1
Be sure to press the OPEN/CLOSE button to close
the disc tray after you remove the disc.
Notes:
- It a non-compatible disc is loaded, “lncorrect Disc', “Region Code Error’ or “Parental Error“ will appear on the TV screen
according to the type ot loaded disc In this case. check your disc again (See pages 8 and 61).
. Some discs may take a minute or so to start playback.
' When you set a single'iaced disc label downwards (ie. the wrong way up) and press the OPEN/CLOSE button or the PLAY
button on the unit, “Heading” will appear on the display lor 30 seconds and then “Incorrect Disc" will continue to be displayed,
- Some discs may not work the resuming lacility.
' Flesuming cannot lunction when you play a PBCrleatured Wdeo CD while the PBC is on To turn otl the PBC. see above.
' Some playback operations ol DVDs may be intentionally fixed by software producers. Since this unit plays DVDs according
to the disc contents the soltware producers designed, some playback leatures may not be available. Also reler to the
instructions supplied with the DVDs
- Do not move the DVD/VCFt during playback. Doing so may damage the disc.
. Use the OPEN/CLOSE button to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may
cause the DVD/VCFt to maltunction
- Do not push up on the disc tray or put any objects other than discs on the disctray. Doing so may cause the DVD/VCR to
maltunction.
. In many instances. a menu screen will appear alter playoaok ola movie is completed. Prolonged display or an onscreen
menu may damage yourtelevision set permanently etching that image onto its screen. To avoid this. be sure to press the
ON/STANDBV (I Kb) button on your remote control once the movie is completed.
- There may be a slight delay between you pressing the button and the lunction activating.
43
7‘ ‘ J2D807O|AlElp12-‘5.965 Act teamusm ‘ if
Basic playback (DVD)
9Playing a disc (continued)
You can play discs at various speeds. — REW
— SKIP KIM
— PLAY
— FWD
— PAUSE/STILL
7 SLOW
§Playing in fast reverse or fast forward directions
Press HEW or FWD during playback. I To resume normal playback
Press PLAY.
new: Fast reverse playback .
® FWD: Fast lorward playback 3
Notes:
Each time you press the REW or
FWD button, the playback speed
changes,
- The DVD/VCR mules sound and subtitles during reverse
and torward scan oi DVD video discs. However, the DVD/
VCR plays sound during last lorward or last reverse play
at audio CDs.
- The playback speed may duller depending on the disc.
$3 Playing frame by frame
I To resume normal playback
Press PAUSE/STILL during still playback.
Press PLAY.
pAusE/snLL Each lime you press the PAUSE/
STILL button. the picture advances
one irame. Note-
The sound is rrluted during trame by lrarne playback.
gPlaying in slow-motion
I To resume normal playback
Press SLOW during playback
Press PLAY.
SLOW Each time you press the SLOW
button, the slow-motion speed
changes. Note-
The sound is rrluted during slow-motion playback.
Locating a chapter or track
Press SKIP N4 or >>l repeatedly to display the chapter or track number you want.
Playback starts lrorn the selected chapter ortrack.
gw To locate succeeding chapters or
® tracks.
Playback starts lrorn the beginning oi
the current chapter or track.
When you press twice in quick successions,
playback starts lrom the beginning or
the preceding chapter or track.
Notes:
~ A “Prohibition" symbol w may appear at the upper leit oi the screen. This symbol means either the leature you tried is not
available on the disc. orthe DVD/VCR cannot access the leature at this time. This does not indicate a problem with the DVD/
VCFL
~ The unit is capable 01 holding a still video image or On screen display image on your television screen indefinitely. Ii you leave
the still video image or On screen display image displayed on your TV lor an extended period or time. you risk permanent
damage to yourtelevision screen Protection televisions are very susceptible.
44
7‘ ‘ J2 rotAlElptz-Aspes u 195.0433st ‘ If
Advanced playback (DVD)
MP3/WMA/JPEG playback
This player can play backthe MFBrWMA/JF'EGadata which has been recorded
on corn or cornw. To produce the MPG/WMA/JF'EGadala. you need a
WindowsaFC with CDaFtOM drlve and a MPG/WMA/JPEGaenooding Software
(not supplied),
The AppleaHFSaSystem cannot be played.
7 Alvl
’ MP3NVMA playback
1 Press OPEN/CLOSE.
The disc tray WIll open.
Place adisc on whlch MP3
or WMA files have been
recorded onto the tray.
OPENICLOSE
®
2 Press OPEN/CLOSE or PLAY.
The disc tray closes automatically.
”mm-“5 on the TVascreerl "Heading" will appear.
Heading will take as a
much time as the M1
number ol tile
3 A file menu screen will appear on the Tv screen.
Press 4 or V to select rolder.
I: is
Press AIV or (I } or Number keys to select
the desired rlle. then press ENTER.
The tile is selected and play commences
' In case the iolder includes more than
15 tracks, press 4 or b to display
next lile list
the
an». mum...
mm nail-ma "
25mm im a.
rip-East ole-21s
4.
Innis. tier.
g. ”some »
,gi:tk
When PLAY has been pressed alter
displaying the llle menu, or when the
disc tray has been closed after pressing
PLAY in step 2, playback begins
automatically startth lrurn the first file.
In this case ll the first file is an MP3/
WMA tile, only MPSIWMA tiles are
played back in order.
ll the tirst tile ls a JPEG ltle, the first
JFEG file is played bank
7‘ ‘ J2D€070|A lEipAz-Aspos As
5 Press sTOP to end playback.
- The unit records the stopped point.
“It ' appears on the screen. Press
PLAV to resume playback itrom the
scene point)
- it you press STOP again or unload the
disc. the unit will clear the stopped point.
MPG/WMA“ PEG CD Inlormation
Limlmions on MP3IWMAIJPEG CD playback
- MPSIWMNJPEG CD is the dtso that is standardized by
509660, its file name must include 3-digits extension
letters. ‘mp3". Mirna” “jug"
- The directory and ltle names or the MPSIWMNJPEG CD
must be correspond to the ISO standardized liles.
' This unit can read 200 tiles per disc. It a disc has more than
200 files. it reads up to 200 llles. the remaining files will be
omitted.
- The unit is able to recognize up to a maximum at 50
directories per disc.
- MPSIWMA CDs cannot be used lor playback lorthe
purpose ot recording.
' It the CD has both audto tracks and MPG/WMA/JPEG tiles.
only audio tracks are played
- It may take more than one minute lor this unit to read MP3/ 2
WMA/JPEG files depending on its structure. 5
' Music recorded by “Joltel Recording Specification" can be =
played back. the me name is displayed (within 16 letters) on §_
the screen. Long tile names Will be condensed. 1,
' The music files recorded by “Hterarchical File System" 5
(HFS) cannot be played. 3
- The unit can play back baseline and progressive JPEG liles. %
leltatlons on display a
- The maximum number tor display is is letters. Available <
letters lordisplay are the tollowmg: capital or small 5
alphabets ot A through 2, numbers ol 0 through 9, and _
(under soorei.
- Other letters than those above are replaced in hyphen.
Notes on MP3IWMAIJPEG files
To play back MPSIWMA/JPEG CD in the recorded order,
1. Use MPSIWMNJPEG soitware that records data
alphabetically or numerically
2. Name each file includlng two-digit or three-digit number
(eg. 111“ 112“ or 1101" 1102")
3, Helrain lrorn making too many subalolders.
WMA disc oompatibllity with this player is limited as lollows:
1) Sampling Frequency: within 32 as 48 kHz
2) Bit Hate: within 48 "192kbps
Mono WMA tiles and WMA llles (under Aokbps) cannot
be played back on this player
CAUTION:
- Some MPSIWMA/JPEG CDs cannot be played back
depending on the recordan conditions.
' The CDaFt/FtW that has no musle data or nonaMPa/WMA/
JPEG lites cannot be played back.
45
195.043 37 PM
Advanced playback (DVD)
9MP3/WMA/JPEG playback (continued)
You can select your desired JFEG lile on the lile menu and picture menu.
The selected JF'EG tile is automatically adjusted to the TV screen. (When the
aspect ratio Ol the JF'EG llle is dillerent to yourTV screen. the black bar will
appear at the top and bottom or the both sides at the TV screen.
7 OPEN/CLOSE
— 0—9
5— SKIP l«/»l
— TOP MENU
— MENU
— ENTER
— A/V/
@ JPEG CD playback
1 Press OPEN/CLOSE.
OPEN/CLOSE
®
The disc tray wlII open.
Place a also on which
JFEG llles have been
recorded onto the tray.
5A.
5 Press ENTER.
The selected picture appears on the TV
sci n
l a... r
Press OPEN/CLOSE or PLAY.
OPEN/CLOSE The disc tray closes automatically.
Reaping Wlll take
as much tlme as
the number ol llle.
A tile menn screen will appear on the TV screen.
Press 4 or P to select folder.
Press AIV or 4 I } or Number keys to select
the desired file.
a ©®®
é ©©®,
®®®®
l®
ro display a picture menu. press MENU.
(To return to a tlle menu, press TOP MENU.)
Press LIV or 4 I p to select the deslred me.
C)
TCIP MENII
~ To display next list, press SKIP M or N4,
~ When PLAY has been pressed after displaying the
tile menu. or when the disc tray has been closed
after pressing PLAY in step 2, playback begins
automatically starting tlom the llrst file. In this
case. ii the first file is a JFEG file the first JF'EG
tile is played back. It the llrsl file is an MF'3/WMA
tile, only MPa/WMAllIes are played back in order.
' s
46
f” J2 70lAtEw‘G-A7.965 As
On the TVsscreen ‘Reading‘ will appear.
Press s'rop to end playback.
The llle menu appears on the TV
screen
It you want to watch the other tile.
repeal steps 4~5.
Notes:
' The picture menu is dlsplayed when the FUJICOLOH CD or
the Kodak Picture CD are played. To display the tile menu
press TOP MENU
' During MFG/WMA/JPEG—Flaybabkyou can not use SEARCH.
A75 Flepeat tunctions.
' You can use Flepeat (Track or All). Random functions and
Program playback tor MPB/WMA/JF'EG CD Playback. (See
pages 52 and 53.)
' In the case pl 3 CD containing a mixture ol MP3. WMA and
JF'EG files. the tiles are played back by selecting them lrom the
file menu.
File menu information
Operation Elapsed time
Mediarype File number
to near
res-minn-
not
arms taIHN
anas tum
<>AV “Euler/Play Mme/Men.
m lndlcalesMPatlle
m zlndlcalesWMAlile
lb lndlcalesJPEthle
Microsolt. Vlfindows Medla and Windows Logo are
trademarks or registered trademarks ol Microsoft
Corporation in both the United States and other countries.
team, a 37 PM
,/\
2009
Dog
ogog
9s;
gm; — SETUP
Q 95 — ENTER
D — A/V/
<5? Setting the JPEG Interval
You can continuously play back all JF'EG files aulomalically.
Aller me selling below. slarl playing the disc on which JPEG files have been recorded.
1 Press SETUP In the stop mode. Press 4 or > to 4 To make SETUP screen disappear, press SETUP.
select “Picture". then press ENTER. vcn MENU
sari" 5m"
D lam Plum Smrl again m D
i® (3 (DAVIEnxSflrkhn
2 Press A or V to select “JPEG Interval". A
m. hwymnsm’ysalwu \ ’
® Ext 0‘
Trsam 43 :l
i away on
,,,, JPEG mu on
@ swq Fla: NI
<>AlensSaqfisml a
3 Press ENTER or (I P to selec1 your desired time. E-
7 mime rue 5m his: em 5
EBL 0“ Q
“50!" A3 3 G
“will 0“ <
JPEG intend 5 m 5
males Al
<>Alensr$lrLRsarn
Off:
Plays back one file at a lime.
5 Seconds:
l=lays back images in me lorm ol a slide show al 5
second intervals.
10 Seconds:
Plays back images in me form oi a slide show at 10
second intervals.
15 Seconds:
Plays back images in me lorm 01 a slide show in 15
second inlervals
47
7‘ ‘ J2DBO70|AlE)n‘G-‘7.p€5 A7 immamm ‘ if
l -EED s m
Advanced playback (DVD)
9MP3/WMA/JPEG playback (continued)
®Setling the Select Files J
When playing back a CD containing a mixlure 01 MP3. WMA and JF'EG files. only MFG/WMA or JF'EG files can be displayed on
me file menu.
1 Press SETUP in the stop mode. To make SETUP screen dlsappear, press
Press 4 or y (a select “Plume“, then press SETUP-
ENTEH. V‘éng'r‘fl‘“
vcn MENU
saw» (3
D uwsmwwms
lcza @ <1) «newsmm
2 Press A or V to selecl"SeIect Files”.
é lavage Mn Sam was are
E B l (y
when 63 2
059137 On
JPEG mm (y
Sela: Fles n
on swam
3 Press ENTER or 4 I} to select your desired
lile type.
Lava; be 5m: ”an-j (as.
EBL o“
w sue" m 2
way On
JPEG Imervd 0—
Sean Hes mm on»,
<>Av Enzdenfi‘em
All:
Displays all files.
Muslc Only:
Displays only MP3NVMA files.
Plclures Only:
Displays only JPEG files.
48
7‘ ‘ J2 70|AlE)D‘S-‘9.965 As , 195043379»! ‘ If
‘@> Zooming (JPEG CD)
This unil will allow you lo zoom in on lhe JPEG image.
1 Press ZOOM during playback.
CM SKIP
ZOOM
C)
Enlarged JPEG imagesaredisplayed.
Vou can make the images even larger
by repealedly pressing ZOOM.
Irame.
2 Press A/V {I} tovlewadmerenlpartoflhe
Q Vou may move the frame from the
centre position Io UP, DOWN, LEFTor
RIGHT direction.
r“ w n
l—nwfi
In the zoom mode press ZOOM repearedly to
return to a 1:1 view (Q 0“).
CH SKIP
ZOOM
C)
7‘ ‘ szrom file‘s-19.965 As
A.
@> Changing angles (JPEG CD)
You can displayJPEG images rotating at 90 degree inlervals.
Press ANGLE during playback. Press ANGLE repeatedly until the desired E
Images are rotated 90 degrees to the right. angle is selected. g
co 5 Pressing ANGLE four times returns the Image i
”TEL? Er 934" to Its orlglnal angle. 1:—
cnurrrsn RESET _ 2
ANGLE ~ Images are displayed at the 3
same angle until the disc is %
removed. 6
49
, 19,604,337 PM
l _:I:EE s m
Advanced playback (DVD)
g"Zooming/Locating desired scene
7 CANCEL
% Zoomi ng
This unit will allow you to zoom in on the lrame image. You can then make selections by switching the position oi the
lrame.
1 Press ZOOM during playback. / P toviewa different part of the
wag“? The centre part of the image will be
zoomed in. I You may move the frame from the
D Each press ol ZOOM will change the |é (“Bl centre positionto UP, DOWN, LEFTor
ZOOM Qt (x i .3). Q2 (x i .5) and Q3 RIGHT direction.
(x 2.0).
In the mom made press ZOOM repeatedly to
return to a 1:1 vlew (Q 0").
q 1
cu sm
zoom
(D
Notes:
‘You can select the Pause, Slow or Search playback in the zoom mode,
~Some discs may not respond to zoom leature.
Locating desired scene
Use the title, chapter and time recorded on the disc to Iomte the desired pomt to play back.
To check the title, chapter and time, press DISPLAY.
1 Press JUMP durlng playback or stop mode. 3 Press Numbered buttons (0-9) to change the
number.
ZERO REruRN
JUMP
C)
® ® ® ' Il you mputawrong number, press
- ~ » CANCEL.
® ® ® _ - Reler to the package supplied with
6) C3) C5) (D the dlSC to check the numbers.
Press A or V to select the “Tlme“, “Tllte” or Press ENTER. Playback 513.15,
“Chapter“.
“A — ' When you change the title,
<3 playback starts lrorn Chapter 1
l l of the selected title.
up ' Some discs may not work in the
® _ above operation.
Note:
In case at the Video-CD playback with PEG, the JUMP does not work. To tum oil PBC. see page g).
50
7‘ ‘ J2 70|AlElv50-53.965 50 19104337 PM
QMarking desired scenes
The unit stores the points that you wanl lo watch again up lo 3 poinls.
You can resume playback lrom each scene.
— A v
7 MARKER
' ENTER
— CANCEL
g Marking the scenes 3 Returning to the scenes
Press MARKER during playback. Press MARKER duringplaybackorstopmode.
MARKER m, , "fl” MARKER
omega-”f Minimum
Mn; 1 an" Mm z m we
"mm! nzmzt
up measure
"mummy
Select the blank Marker using A or V.
Then press ENTER at the desired scene. 2 Press A or V t° selm the Marker 1'3'
mm | no 27 y
mm 2 NHIIZ
mm 3 Hz or; :n
l AV‘EmerwzlmM
~ Repeal lhis procedure lo set
the other 2 scenes.
llnrizv i mzzrsa
&> m z .. ....
“Rama? "
T 3 Press ENTER.
<3
Playback starts from lhe marked
scene. 2
Press MARKER to remove this display. 5
MARKER i
1:
C) I To cancel the Marker 5
Follow the above steps 1~2, lhen press CANCEL. g
Notes: 5
- Some discs may nol work with the marking operation.
- The marking is canceled when you open (he disc tray or turn
the power oil.
' Some subtitles recorded around the marker may lail lo
appear,
51
7‘ ‘ szvorArEinfio-iapes 51 , 19,504,33er ‘ If
f” J2 701AlElv50-53965 52
Advanced playback (DVD)
gRepeat playback/A-B Repeat playback
1 Press PLAYMODEduring playbackorstopmode.
nil L305
DVD
2 Press {I y or ENTER once or twice to select
“Chapter“ or "Title”.
w. H
«mm»...
we u
an r-
CDIVCD
Press V to select “Repeat“.
Press {I y or ENTER once or twice to select
“Track“ or “All“.
w ,. mm at ma. 3-
<1we-1(3 Titian-MS Eta-m?"
Press PLAY MODE again to make the screen
disappear.
Press PLAY to start Repeat playback.
To resume normal playback, select Repeat “Ot‘l”.
Notes:
Some discs may not work with the repeat operation.
52
C — PLAY MODE
a — A»B RPT
— ENTER
— Vl
Repeat playbackol Title, Chapter and Track A-B Repeat playback
A-B repeat playback allows you to repeat material between
two selected points.
1 Press A-B RPT during playback.
A-B RPT The start point is selected.
Q ..
2 Press A-B RPT again.
A-B RPT
C)
The end point is selected. Playback
starts at the point that you selected.
Playback stops at the end point, re-
turns to Point A automatically, then
starts again.
SA—a
I To resume normal playback
Press A-B FtPT again.
A-B RPT “t“! Off ' appears on the screen.
0 ..-.
Notes:
- In AVB repeat mode. subtitles near pointA or B may not
appear.
- A-B Repeat playback IS not available in multi-angle scenes.
- A-B Repeat playback does not work when Repeat playback
is on.
' You may not be able to set Ara Repeat. depending on the
scenes 0’ the DVD
' A'B repeal does not work with an interactive DVD‘ MP3/
WMA/JPEG CD and Video CD with PEG.
team, a 37 PM
QProgram playback/Random playback (CD)
You can arrange the order 01 tracks on the disc.
) — 0—9
7 PLAY MODE
— CANCEL
/ 25; Program playback
1 Press PLAV MODE in the stop mode.
SPISLJ
PLAVM DE
Play nods
Rape:
4».
on
a,
Press A or V to select Play Mode, then press
4 I p or to select “Program”.
®
®
El
<>Av ‘Brml‘aulfiit was
Press A/V or {I} toselectlhe programmlng
posltlon. Use Numbered buttons (0—9) to Input
the Track numbers.
‘ To program others, repeat Step 3.
- It you input a wrong number, press
Press LIV or {I} to select “Program
Playback“ and press ENTER.
. to playback in the order.
Em) (i) To return to normal playback, select
w Play Mode: “Olf”.
may Mods
The programmes you selected will start
» ngrrw
an- e--- 9-
mjar Pm
<>Av swarm-aromatnay um
I To cancel program playback
Select “Clear" and press ENTER.
‘ The program is canceled when
. 3»
‘® CANCEL you open the disc tray or turn the g
n!
my Hm power off. a
. _ . Repea' 3.
® ® ® 3
® ® 03 Note: g
~ - « ~ Pwsmlew In playing back the Video CD wrlh PBC, you cannot set
® ® ® (D on crewman» Program playback, E
~ 9
$5; Random playback
1 Press PLAV MODE in the stop mode. Press PLAY.
swsrg
PLAV M DE The Random Playback will start.
Press A/V to select Play Mode, then press Note'
41 b 10 select “Rsnd°m"- In playing back the Video CD wnh PBC, you cannot set
w Random playback,
Pl Mfi : Riki!!!
m E) W [12223 e : tr"
l® ®| 4>A72n217bflhde
fi)
53
7‘ ‘ szewom tam-53.965 53
, team, a 37 PM
+~
l -EEE e m
Advanced playback (DVD)
QChanging angles/Title selection/DVD menu
— TOP MENU
— MENU
— ENTER
—A/V/
®Changing angles
When playing back a disc recorded with multi-angle lacility.you can change the angle that you are viewing the scene from.
1 Press ANGLE during Playback. 2 Press ANGLE repeatedty unlll the deslred angle
The current angle will appear. ls se'ec'ed-
court-ten RESET
couifigfiéeser ANGLE
film
Note:
Depending on the DVD. you may not be able to change the
angles even it multirangles are recorded on the DVD.
@ Title selection
Two or more lilies are recorded on some discs. It the title menu is recorded on the disc. you can select the desired title.
Press TOP MENU during playback. 3 Press ENTER or PLAY.
TOP MENU Title menu appears on the screen. The playback ol the selected title will
C) _ start.
2 Press A/V or {I } to select the desired title.
Note:
E 357 G Depending on the DVD. you may not be able to select the title.
G) Depending on the DVD. at ‘tltle menu" may simply be called a
“menu“ or 'title“ in the instructions supplied with the disc.
“E DVD menu
Some DVDs allow you to select the dlsc contents using the menu.
When you play back these DVDs. you can select the subtitle language and sound-track language. etc. using the menu,
1 Press MENU during playback. Press ENTER.
MENU The DVD menu appears on the screen. 3
C) - Press MENU again to resume
playback at the scene when you
pressed MENU.
The menu continues to another
screen. Repeat steps 2 and 3 to set
i the item completely.
2 Press A V or 4 p to seledihe desired Item.
Note:
(3 Depending on the DVD you may not be able to resume
. 1 playback lrom the scene pelnt when you pressed MENU,
é
54
7‘ ‘ J2 70|Ale5‘-57.965 51 , t95.04,337w ‘ If
-DI e mil l
Function setup (DVD)
‘%’hanging soundtrack language/
Setting surround sound
jgcmnging soundtrack language
You can select the language when you play a multilingual disc.
I In case at Video CD playback
Audio type changes as Iollows each time you press AUDIO.
1 Press AUDIO during playback.
AUDIO SELECT ,
AUDIO The current soundtrack language wtll
appear.
[IELH [IEL llER
Speedwell ID Spariatnsrod I» spanalizelOll
El 28 Fra Doby Digital
Spatiallzer Off
Notes:
' ll the desired language is not heard alter pressing the
button several times. the language is not recorded on
the disc.
. Changing soundtrack language is canceled when you
open the disc tray. The inillal delaull language or available
language will be heard iI the disc is played back again.
Press AUDIO repeatedly until the desired Ian-
2 guage is selected.
AUDIO SELECT The on-screen display will disappear
alter a lew seconds,
IE! us Eng Dolby Digital
Spaiializer Oif
fisaflng surround sound J
This DVD/VCR equipped with a "SPATIALIZER VIRTUAL SURROUND". It can produce the eliect ol being in a cinema
or a conceit hall.
. . I To cancel Surround mode: ;'
D rn d o la back ressA DI .
1 u I Q Is in y p U 0 Follow the left steps I ~2s then press 4 or ) to select the 5
AUDIO SELECT ‘oif' position. 3
AUDIO a
IE! us Eng Dolby Dig’tal Note: =
Spatiallzer Off The =SPATIALIZEFl VIRTUAL SURROUND" is elleciive only “U
lor the sound oi disc. 3
2 Press 4 or y to select “On". 5
7 spatializer Dimensional Sound Processing provided by
,, 118 E D l D' hi Desper Products. Inc.
<7) 5 aiming" ° by ‘9' Certain audio leatures oI this product manufactured under
p a license Irom Desper Products. Inc.. Spatializer® and the
circle-in-square device are trademarks owned by Desper
Products. Inc.
55
7‘ ‘ J2D€070|AlElu51-57.965 55 , 195.04.337 PM ‘ l?
l -EEE @ m2!
Function setup (DVD)
QSetting subtitles/Karaoke playback
7 SUBTITLE
— AUDIO
fA/V
® Turning the subtitles on and off
When playing back a disc recorded with subtitles, you can turn the subtitles on or oiir
Note:
Depending on the DVD, you may not be able to turn
Press SUBTITLE during playback until “Of!“
a ears.
W the subtitles on even ilttley are recorded on it.
505ml: Q0” Depending on the DVD, you may not be able to turn
the subtitles oil,
Z® Changing the subtitle language
that can select the language when playing back a disc recorded with multi-Iingual subtitles.
PresssUBTITLErepeatedlydurlng playbackuntll Notes:
1 your desired language appears. - Changing subtitle language is canceled when you open
"R the disc tray.
swarm: - Depending on the DVD you may not be able to change
the subtitles even ll multilingual subtitles are recorded
on it. While playing the DVD, the subtitle may change
when: you open or close the disc tray you change the
title,
. In some cases. the subtitle language is not changed to
the selected one immediately.
E1162 Eng
The (tn-screen display will disappear after a law
seconds.
® Karaoke playback ‘
Vou can turn the vocal on or oil recorded on the DVD KARAOKE.
Notes:
23313. DVD KARAOKE d'“ P'aV'mki We“ - The vocal output leature ts used during playback ol
MIIIICI SELECI Dolby Digital (mum-channel) recorded DVD KARAOKE
Aunlo dists, This leature allows you to turn 0" vocal audio
tracks. or restore them lor background accompaniment.
at its Eng Dolby Digital
KS’E/ Spafia’ile'o'f - When playing Karaoke connect appropriate audio
equipment such as an amplifier to the DVDNCH.
2 Press A arVumII the KARAOKE symbol (j)
appears.
. Il you play non-Karaoke disc, the KARAOKE
symbol (j) does not appear.
El its Eng Dolby Digital
j Oft
3 Press 4 or p to select “On“ or "on“.
On : The primary vocal is output
w whenitisrecordedonthe disc.
G) G) Ofl : The pnmary vocal is not output.
56
7‘ ‘ J2 7D|AlEiv5‘-57.965 56 , l95,m,337m ‘ If
,/\
QE.B.L. (Enhanced Black Level) 533”
To select the black level oi playback pictures. set your prelerenee 0 g 0 g
and monitors ability.
A’Q
\,;\Cr
9 D — SETUP
[gzé Cg E‘f RETURN
S a 7 ENTER
— A /V 141»
® Setting E.B.L.
Press SETUP in the stop mode or No Disc. To make SETUP screen disappear, press SETUP
Press 4 or } to select “Pickle". or RETURN while the SETUP screen is being dis-
played.
ch MENU
SETUP bummer-awe” vcn MENU
<3 cm
RETURN
, 1' % <>Av1E|ern|>=lnm D
2 Press V or ENTER. then press A or V to select
“E.B.L.“.
é lawPimnScmd hanger-r
EBL OF
i use... w:
may Du
JPEGi-xvfi if
swarms n
qnvmrmaflm
3 Press {I } or ENTER to select “On“ or “on”.
1mm ran 5m hens w
m 0“
mm“ A31:-
flisphy 0“
mac new 0-
seea files n
<>Avannr€een€Em
(aAa) dines uolwund
On: Enhanced grey scde (0 IRE cutoff)
011: Standard grey scale (7.5 IRE cul off)
57
7‘ ‘ J2D€07O|AiE)v5‘-57.965 57 , reamamm ‘ If
l -EED e m
Function setup (DVD)
9Setting the aspect ratio of TV screen
You can select the aspect ratio ior your TV.
The lollowing pages describe the setup/operation in DVD mode.
— SETUP
7 RETURN
7 ENTER
— A/V/
® Setting the aspect ratio of TV screen
Press SETUP in the stop mode or No Disc. Vou have the lollowing screen sizes to choose irorn:
1 Pressq or } to select "Picmre“.
4:3 D Letter box:
VCR MENU . . .
SETUP lzqrnqs’fih'eSmd we” Select this mode when connecting to a conventional TV.
Q When playing back a wide screen-DVD disc. it displays
the wide picture with black bands at the top and bottom oi
* screen,
ii i?) <>av£m$fiicim 4:3 El Parr scan:
It displays the wide picture on the whole screen with leit
and right edges automatically cut oil.
16:9 Wlde:
Press 7 or ENTEH,then press A or V to select Select this mode when connecting to a wide-screen TV,
“ v Screen“. A wide screen picture is displayed lull size, L
& “Wt“?! “mat“ “mm" To make serup screen disappear, press SETUP
@ “an" “H: or RETURN while the SETUP screen is bean dis-
as, Dam on played.
E) JPEetramt tr"
Sele-JFies Al vcn MENU
<>Av BerellfiExm SETUP
3 Press } or ENTER. RETURN
Press A or V to select your desired screen
type. then press ENTER.
Note:
fi) mmefieSfl-fl! Meir Ii the DVD disc is not iormatted in the pan is scan style, it dis-
‘ ,, Eat 0' plays 4:3 style.
(m ( . aw at: set:
..,. Dephy Du sat:
(D JPEG mental if test:
sesame: n
a." Elztseufium
58
7 J2 70m lEipss-stpes 53 , teem. 337 PM
fA/V/4/b
®Setting on screen display
On screen display can be switched on or off when you press the buttons.
Press SEI'UP in the stop mode or No Disc. Press 4], or ENTER to selecl"0n“ or"°fl“_
Pressq or y to selecl “Picture".
V‘gg‘fi‘“ [swims am Send We” 7 flmem if“ PM W"
(3 ‘ED Tvsuesn m :|
Diwhy on
7 JPEG hear on
5m Fibs All
‘ a, a. on grammar ”"E’mm'm‘m
r 4 <3
On: On screen displays appear when you press
the buttons (lactory setting).
on: On screen displays do not appear when you
Press V or ENTEH,lhen press A or Vloselecl press any buttons.
“Display“. 4‘
(E) laminae in» Sam and ers- To make SETUP screen disappear, press SETUP or
‘ ESL o“ RETURN while the SEI'UP screen is being displayed.
W Sign 43 3
may on vcn Menu
(3 JFEG new if SErUP
S I Fm Al
is; mismana- D
REruRn
C) m
2».
fie 2
5°55? Status display of dlsc 3
€
Each press of DISPLAY, the status display ol the disc Video CD 2
will appear on the screen and change as follows. 542 “3? mac my? use 9
Iran—[—
DVD "
name mm:
‘3
Audio CD
. 14'56 m:
“an“ 99
To make status display disappear, press DISPLAY again
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
59
7‘ ‘ szroiAiEinfis-sipes 59 , I?5NJA,JJ7PM ‘ If
l -EED @ m
Function setup (DVD)
Dynamic Range Control
DFlC (Dynamic Flange Control) enables you to eonlrol lhe dynamic range so as to
achieve a suitable sound lor your equipment.
— SETUP
— RETURN
—ENTER
fA/V/
’ fie Dynamic Range Control
To make SETUP screen disappear, press SETUP
or RETURN thIe the SETUP screen Is belng
1 Press SETUP In the shop mode.
displayed.
Press 4 or } to select“Sound“.
”fig-Hf?" wage am M her! use:
w onererseuflen
E1
Notes:
- This lunction works only during playbaek ol Dolby Digilal
recorded discs.
. The level ol Dynamic Flange Fleduclion may diiler
depending on DVD video disc.
2 Press V or ENTER to select “Dialogue”.
lmme’cm sun eye-gm
Man or
«u anemia-
Press } or ENTER. then press A or V toselect
3 desired setting.
bems’bvssm’aereaw
w Me! m elm-ll
(Z) Chm
8’9 8?
<>Av 5"?qu
On: Loud sound such as explosion or lhe
like is toned down slightly when played
back. This makes it suitable lor when it is
connected lo a stereo.
0": It plays back al lhe recording level on the
disc.
60
7‘ ‘ J2 701AlElv53-Gl.p€5 so , immamm ‘ If
QParental control setting
Some discs are specified not suttable lor children. Suoh discs can be limited
not to play back with the unit.
— RETURN
— ENTER
7 CANCEL
® Parental control setting
Press SETUP in the stop mode or No Disc.
1 Press 4 or p to select “Parental“. Then press
4 Press ENTER to store the password.
Note: Now the rating is locked and the
setting cannot be changed unless you
enter the correct password.
v or ENTER.
vgrwfltu Lary§=aassuiw<3$
— r
(I) 0"
O-Bcancel
on amass-n seam
(I m.) >1
E)
Lawless Petite Sound mu my
Password ——6
Panel |
ire/camel
<7Avr’EniurSsi-a/Rumm
Press A or v to select “Parental“, then press
2 4 or } untlllhe level you requlre appears.
&) Langme ens-e Sand M mu
m a. Pamld —‘
E E Pareial I
d)
<>Av EraSeelfim
0 Level Off: The parental control selling does not lunc‘tion.
0 Level 8 All DVD soltware can be played back.
- Level 1: DVD software for adults cannot be played
back.
‘ Select lrom the level 1 to level 8. The limitation will be
more severe as the level number is lower.
Press A or V to select “Password“.
Press number buttons(t'l-9) to inputa Migit password.
m. [mgmemsmmm
E) emu lam-r
l baml x
Q 0»9«Caooel
® ® ® <>Av5n3$mizln
G) (5-3 Ch
63 ® ® (53 Elesureto rememberthis numberl
- Il you input a wrong number.
press CANCEL.
7‘ ‘ chewom lElpiS-Gl.p€5 st
Press SEI'UP or RETURN to remove the paren-
tal control screen.
VCR MENU
SETUP
C)
Notes:
- It each setup (pages 57~56) has been completed, the
unit can always be worked under the same
condltlons (especlally with DVD dlscs).
Each setup wIII be retalned In the memory It you turn
the power on.
- Depending on the discs, the unit cannot limit playback.
- Some discs may not be encoded with specific rating
level inlorrnation though its disc jacket says “adult". For
those discs, the age restriction will not work.
teem, : 37 PM
fir
1.
2».
!R
61
f” J2 voiAlesz-szpes 52
Function setup (DVD)
QTo change the parental level
— OPEN/CLOSE
— 0—9
— SETUP
— RETURN
— ENTER
—A/V/
’@To change the parental level
Press SETUP In the stop mode or No Dlsc.
Press 4 or p to select “Parental”.
Then press V or ENTER.
VCR MENU
SETUP
Lame sane 5m: mu m.
“am/fl —-’
“new 1
on maxim-i
Press A or V to select “Password”, then press
number buttons (0-9) to enter the password.
Note: You can change the password
j il you want.
WWW? Paine Swm man we
Pam saw-n
- - - Parana 5
(D ® ®
93 @ <9 . o—wcm
® ® ® @ <>Avmmwm
Press number buttons (0—9) to enter the pass-
word you have stored.
®®®
_ _ _ mnemsmmm
©©® . 2:73“ “5“
®®®®
H‘Caflxl
on sum-gnaw
3 Press ENTER.
The rating ls now unlocked.
mnemsmmm
9mm —-
| W...) hen)! 1
Hear-x4
<>sv sum-gnaw
Press A or V to select “Parental", then press
4 or ) to change the parental level.
Iagnge m 53.1 mg m
5m ——‘~
“and 5
é)
weaves!
on Emsmm
62
6 Press ENTER.
7 Now the paremal level is changed and
locked.
=--) urn-ape Plane sow mum
Famed
Para“! 5
o—a/cancel
<>Avl£rte/Sew/Relun
Press SETUP or RETURN
to remove the parental control screen.
VCR MENU
serup
(D
RETURN
C)
I! you forget the password...
1. Press OPEN/CLOSE to open the disc tray.
2. Remove the disc.
3. Press OPEN/CLOSE again to close the disc tray.
"No Disc“ appears on the screen.
4. While holding 7 down on the remote control, press
STOP on the from panel. “PASSWORD CLEAR" ap-
pears on the screen
5. Enter a new password again.
19504, a 37 PM
Wemporary disabling of rating level by DVD disc
Depending on the DVD disc the me may lry lo temporarily mncel the rating
level lnal you have set.
It is up lo you to decide whether to caan lne rating level or not.
o— OPEN/CLOSE
Load a DVD disc and press PLAY or OPEN! Enterthe password with number buttons (0-9).
CLOSE an the unit (see page 42). Then press ENTER.
® ® ® Il you lrllerrupl the entering, press
» - - H EI'UH N.
® ® ® ® Pleasesmalllls
OPEN/CLOSE 7 4— ml passwmfl
G)
@ Emel/D —91€anceI/Renllrl
IttheDVDdIschasheen deslgnedlotemporarlly i
cancel the Ratan level, the screen whichtollows RETURN
the “Reading“ screen wiIIchange. depending on D
which discis played. Il you select “VES"with the A
?# ENTER key, “Vour dlsc exceeds the parental 4?»
control Ievellt.“ screen wIII then appear.
5 Playback will commence it the entered
password was correct.
lie-ulna Your fl so exweds
the palemal comm Iwel
Paremal Control Level
Cancel P owe “9m _ _
Thls temporary canoellallorl ol rallng level M" be kept mm the
n W‘MM disc is ejecleo.
When the disc is ejemed. the onglnal rating level will be set again
lfyou wish to cancel the set rating Ieveltem porarily, automatically.
select “ParentaIControI Level" with A or V.then
press ENTER. If the 4-digit password at step 2 on
page 62 has been set. the password entering
screen will appear as shown In step 4.
Alternatively, It the password has not been set,
playback will commence. Ii you don't know (or have
lorgotten) the password, select "cancel Picture".
The setting screen will disappear. Press OPEN]
CLOSE to remove the disc.
(GAG) drllas Honour-s
l)? B B?
OPENICLOSE
®
63
7‘ ‘ J2D€070|AlElDGZ-G7.965 as , leeway PM ‘ If
l _ZEEEI e m
Function setup (DVD)
gSetting OSD language 8880
The setup language can be selected. 9 9 Q Q
7 SETUP
— RETURN
— ENTER
7 A/V/
r .
iSettlng OSD language
Press SETUP in the stop mode or NO Dlsc. To make SETUP screen disappear, press SETUP
Press 4 or P to select “Other" or RETURN while the SETUP screen Is being
' displayed.
V‘éyfl“ lzqiaqs’lzn Sound alumnae
C) "we"
(I)
RETURN
C)
.,, m. «u sternum
2 Press V or ENTER to select “OSD Language“. It the unit does not operate properly: Static electricity,
elm. may afleci the player's operation. Disconnect the
AC power cord once, then connect it again.
[31155ka 535154 N!
l emu-w nun
<3
ousmsunflfim
Press V or ENTER and then press A or V to
select desired language (e.g. English), then
press ENTER.
m. W’imssu-j’asfioh
E3 W magma my Eng
Q) 3”,
<>Av sternum
64
f” J2 volAlesz-szpes an , I?;504,337PM
O .
Setting language
You can select the language 01 ‘Menu". ‘Sublille" and “Audio" il their languages
are recorded onto the disc more than one language.
7 — SETUP
— RETURN
—ENTER
—AlV/
@ Setting language
Press SETUP in the stop mode or No Disc. To make SEI'UP screen disappear, press SETUP
Press 4 or P (a select “Language”. or REI'UHN while the SEI'UP screen is being
VCR MEN alsplayed.
SETUP U lm‘kile 5am 3:21:11 ea—
VCH MENU
SEruP
(D
l ( A m «av—Jetsam
C)
C)
Note:
ll the selected language is not recorded on the disc. the lirslr
2 Press V or ENTER,then press A or V to select
priority language is selecletl.
desired Iangugage item.
& [my flat-e Sand him 31— site
| MW finish
"3 sums Aux-sac
Anti) Evel-
4 bav EAMQEM
3 Press > or ENTER.
Press A or V to select your deslred language,
then press ENTER. 2‘
a, 5-
,l =
ill
(E (3 l!
1:
4 nv amnesty-l E
English. Francals. Espanol: ""
The selected language will be heard or seen,
Other-
Othe anguage can be selected (see “Language code
list" on page 67).
or ' : (Au io)
Elle unit will select the first priority language cl each
isc.
Automatic: (Subtitle)
- The unit will automatically select the same language in
the AUDIO setting.
' When the unit selects the same Ian use as the AUDIO,
the subtitles will nut appear during 9 yback.
. When you do not use the same language as the AUDIO.
the subtitles will appear during playback.
cm: (Subtitle)
Subtitles do not appear.
65
7‘ ‘ J2D€070|AlElvG2-G7.p€5 $5 l9504,337PM ‘ l?
Function setup (DVD)
QSelecting PROGRESSIVE scan 0
The progressive scan capability provides the highest resolution pictures with less " O O O
tlickerand line structure. mi 1
It you are using the Component videojacks, but are connecting the DVDNCR to O O
a standard (analog) television, set PROG Fl ESSIVE to oil,
It you are using the Component video jacks lor connection to a TV or monitor that
is compatible with a progressive scan signal, set PROGRESSIVE to On.
Selecting PROGRESSIVE scan
Preparation: There are two types 01 source content in pictures recorded in
. Connect to a TV equipped with component jacks, DVD video discs: iiim content (pictures recorded irom iiims
~ Turn ON the TV and set it to the corresponding video input at 24 Frames per second) and video content (video signals
mode, recorded at 30 trames per second).
‘ Set the SaVIDEO/COMF'ONENT video selector switch on
the rear panel to COMPONENT position.
‘ Press VCR DVD selector to select the DVD mode. (The
DVD indicator will light.)
Whenthe unit plays backalilm source material, uninterlaced
progressive output signals are created using the original
inlormation. When a vtdeo content is played back, the unit
interleaves lines between the interlaced lines on each to
create the interpolated picture and outputs as the progressive
1 Press PROGRESSIVE in the stop mode. S'Qflalfl
INN", SELECT The progressive indicator ‘a"on the
PROGESSIVE display Window Wl|| light.
0 - The unit recognizes the picture
source (lilm or video) ol the ounent
discaocordirlgto the discinlormation.
2 Press PLAY to start playback.
I To select PROGRESSIVE scan Off
Press PROGRESSIVE in the stop mode.
The progressive indicator on the display window will
go all.
Notes:
~ Some discs may not be played back with the progressive
scanning mode conectly because ol the disc characteristics
or recording condition.
~ It yourTV does not accept the progressive scan lormat, the
picture will appear scrambled it you select progressive scan
output lrom the unit. In such a case, select PROGRESSIVE
scan Oil,
~ Once PROGRESSIVE scan On, all othervideo outputs are
disabled except component video outputs.
~ You cannot make the progressive scanning mode active in
lollowing cases,
—The unit is in the VCR mode,
—The disc is played back in the DVD mode,
—The S-VlDEO/COMPONENT video selector switch is set to
S-VIDEO position,
66
7‘ ‘ J2 roiAlEipsz-s7.p65 so teemaum ‘ If
Others
QLanirguage code list
Enter the appropriate code number for the mmai semngs “Menu". ‘smma‘ andior ‘Audlo' (see pages 65)
Language Name Code Language Name Code Language Name Code Language Name Code
Abkhazian 1112 Fili 1620 Lingala 2224 Singhalese 2919
Afar 1111 Finnish 1619 Lithuanian 2230 Slovak 2921
Afrikaans 1116 French 1628 Macedonian 2321 Slovenian 2922
Albanian 2927 Frisian 1635 Malagasy 2317 Somali 2925
Amharic 1123 Galician 1722 Malay 2329 Spanish 1529
Arabic 1128 Georgian 2111 Malayalam 2322 Sundanese 2931
Armenian 1835 German 1415 Maltese 2330 Swahili 2933
Assamese 1129 Greek 1522 Maori 2319 Swedish 2932
Aymara 1135 Greenlandic 2122 Marathi 2328 Tagalog 3022
Azerbaijani 1136 Guarani 1724 Moldavian 2325 Talik 3017
Bashkir 1211 Gujarati 1731 Mongolian 2324 Tamil 3011
Basque 1531 Hausa 1811 Nauru 2411 Tatar 3030
Bengali; Bangla 1224 Hebrew 1933 Nepali 2415 Telugu 3015
Bhutani 1436 Hindi 1819 Norwegian 2425 Thai 3018
4? Bihari 1218 Hungarian 1831 Oriya 2528 Tibetan 1225 é‘
Breton 1228 Icelandic 1929 Panjabi 2611 Tigrinya 3019
Bulgarian 1217 Indonesian 1924 Pashto. Pushto 2829 Tonga 3025
Burmese 2335 Interlingua 1911 Persian 1611 Turkish 3028
Byelorussian 1215 Irish 1711 Polish 2622 Turkmen 3021
Cambodian 2123 Italian 1930 Portuguese 2630 Twi 3033
Catalan 1311 Japanese 2011 Quechua 2731 Ukrainian 3121
Chinese 3618 Javanese 2033 Rhaeto-Romance2823 Urdu 3128
Corsican 1325 Kannada 2124 Romanian 2825 Uzbek 3136 9
Croatian 1828 Kashmiri 2129 Russian 2831 Vietnamese 3219 E
Czech 1329 Kazakh 2121 Samoan 2923 Volapiik 3225 m
Danish 1411 Kirghiz 2135 Sanskrit 2911 Welsh 1335
Dutch 2422 Korean 2125 Scots Gaelic 1714 Wolof 3325
English 1524 Kurdish 2131 Serbian 2928 Xhosa 3418
Esperanto 1525 Laothian 2225 Serbo-Croatian 2918 Yiddish 2019
Estonian 1530 Latin 2211 Shona 2924 Yoruba 3525
Faroese 1825 Latvian,Lenish 2232 Sindhi 2914 Zulu 3631
67
7‘ ‘ J2D8070|AlEIpGZ-G7.p€5 er , rasimraarw ‘ If
Others
gTroubleshooting
Check lhe lollowing guroe lor lhe possnble cause or a problem belore oonlacrrng seryloe
SYMPTOMS POSSIBLE SOLUTIONS
DVDNCR
- Make sure lhe power cord ls plugged ln.
- Try anolher AC ourler.
DVD/VCR does "01 operale- - Power ls all. oheok luse or clrcurl oreaker
-unplug uml,lhen plug n oaok ln.
- Selemhe DVD or van mode oelpre operanng.
- Anlenna conneorlon rs nor correcr or anlenna caole ls dlsccnnecled.
- The vldeo channel ls nor rn lhe correcr posrrlon or lhe Tv ls nor ser ro lhe yldeo
channel 3 or 4.
No nurture» - cheek lhe unn ls oonnecled oorreolly.
- The vldeo mpul seleclor ol lhe TV ls nor sel ro VIDEO Sal lo VIDEO (or
egulvalenll.
- Channel ls sel lo rhe exlernal mode.
- Check me unll ls oonnecled oorreolly.
- Cheek rhe lnour seleclor ol lhe amphher rs sel properly
- The unll rs ln lhe Speoal playoaer mode.
-Alm lhe remore oonlrol ar lhe remore sensor.
- Operare wnhln Approx 7 Merers or reduoe lhe llghl ln lhe room.
The remore conrrol does nor lunehpn - Clear lhe parh ol lhe oearn.
- The banerm are weak. Replace lhe oanenes.
- Check me banenoe are lnseneo oorreolly.
- Check all Cable Tv wrlrlecllorls.
- srarlon or cable TV sysrern proolerns. lry anorher slallon
No Cable TV reoemlon.
VCR
- The erase preyenmon lab ol the vrdeo mssehe ls broken oll
W "’°°"""9 “95 "°‘ WK - The unn ls ln rhe sxlemal rnpur mode.
- The llme ls nol sel correctly,
"fimer reoordrng does not work - The recordlng swan/end we re nol sel oorreclly
-The TIMER REC has nol been pressed (E us nor lrl)
- Traekrng adyuslmenl oeyond range ol aulprnanc lraeklng elrcun. Try Manual
lracklng adluslmem.
- vldeo heads are drrly.
- The rape ls worn or damaged,
Nelse bars on scleerl.
DVD
Drsplay ls nor shown ln your language - Salem proper language m The menu opllons
. 64
- No dlsc ls lnserled. 42
Playback ooesn'r Slanv - The dlsc may be dlflyv Clean up lhe drso. 7
- The unlr eannor play DVD-howls. ale. 3
Slopplng playback, slpw-rnonon play repeal
play, or memory play, etc, cannol oe - some arses may nor do some ol rhe lurlCTIOrls
perlprrned.
- The S-VIDEO/CDMPONENT seleoror ls nor eel correclly
N“ P‘c‘me' ”me sc’ee" ‘5 ”W“ W “we" - The PROGRESSIVE scan ls oh rhrough lhe unrl l$ oonnecled lo a Tv
‘”‘° "”° W‘s- yla lhe VIDEO OUT or lhe SVIDEO OUT lack
No 4:3 (16:9; plclure. ~ The seluo does no! malch your Tv.
No onscreen dlsplayv - seleer Drsplay ~oni
No surround sound, - The serup um nor march your srereo sysrern
$2333.55 remote opelallon Key ls ”01 - Turn on lhe unn and unplug the AC power cord lor several rhlnules. lhen replug lL
Playback does not swan when lhe rlrle ls
selecled.
Audro soundlrack and/or suomle language
ls nor changed when you play back a DVD
- check lhe Parenlal setup,
~ Mullllrngual language ls nol recorded on lhe DVD dlsc
- Some were have no suhlllles,
~ Submles are cleared. Pres SUBTITLE.
Angle cannol oe changed. - Mulllaangles are nor recorded on lhe DVD dlsc.
No suhlllle.
W appears on lhe screen - The lunorlon rs prohrhned wnh lhe unn or lhe dlsc
68
7‘ ‘ J2 TorAlElpss-mckpes as leslmlaarw ‘ If
QSpe(.'tfi(.'atwns
General
Power supply AC 120 V 80 Hz
Power consumption Operatio 18 W. Stand by: 2 W
Weight 7 lbs (3 kg)
Dimensions Width. 16-15/16 inches (430 mm)
Height: 3-7/8 inches (99 mm)
Depth. 8-13/16 inches (224.5 mm)
Tuner 181 channel lreq. synthesized
VHF 2-13
UHF 14-69
Cable TV 113 Channels
Antenna input/output
UHFNHF In/Out: 75 S! coaxial
RF channel output
Channel 3 or 4, Switchable
Color system NTSC
Video head 4 Rolaw heads
Audio track Hi-Fl sound - 2 Tracks / MONO sound - 1 Track
Hi-Fi frequency response
20 Hz to 20,000 Hz
Hi-Fi dynamic range
More than 90dB
F.FWD/REW time at 25‘C (77'F)
Approx. 1 minute and 48 seconds (with T-120 Cassette Tape)
Applicable disc DVD (12 cm. ch). CD (12 cm.8om)
Frequency range DVD. 4 Hz-22 kHz, CD: 4 Hz-20 kHz
S/N ratio 90115 (DVD)
Harmonic distortion
0.0270 (DVD)
Wow and flutter
Less than 0.01 % Wrms
fir
Operating conditions Temperature: 5’C-40’C (41 'F-104'F). Operating status: Horizontal
Input/Output
DVDNCR
Video input 1.0 V (D'l’)v 75 9, negative sync., pin jack x 2
Video output 1.0 V (p-p), 75 (2, negative sync., pin jack x 1
Audio input —8 dBm, 50 kn, negative sync.. pin Jack (L/R) x 2
Audio output
—8 dBm, 1 kn, negative sync.. pin Jack (L/R) x 1
DVD
S-video output
Component video output
(Y) 1.0 V (p-p), 75 9, negative sync.. Mini DIN 4»pin x 1
(C) 0.286 V (p-p), 75 {2
(Y) 1.0 V (p-p), 75 (2, negative sync.. pin jack x 1
(Pa)/(Pw) 0.7 v (p-p), 75 9, pin jack x 2
Audio output (BITSTHEAM/PCM
COAXIAL)
0.5 v (p-p), 75 (2, pin jack x1
Audio output (BITSTHEAM/PCM
OPTICAL)
Optical connector x 1
Audio output (ANALOG)
—12 dB, 1 kn, pin jacks (L, H) xi
S-VIDEO/COMPONENT Video selector
Slide switch x i
Supplied accessories
Audio/video cable
Remote control (SE R0108)
Batte es H03/AAA
75 ohm coaxial cable .
- Designs and specilications are subject to change without notice.
7‘ ‘ J2m701AtElvGS-MCK965 as
, 195.04. a 37 PM
69
Others
9Limited warranty
Limited United States Warranty
DVD Players - Exchange Warranty
Toshiba Amerlca Consumer Products. L.L.C. (‘TACP') makes the following limited warranties to original
consumers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DVD PLAYER AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND T0 NO OTHER PURCHASER OR TRANSFEREE
PRODUCTS PURCHASED IN THE USA. AND USED IN CANADA ARE NOT COVERED BY THESE
WARRANTIES
PRODUCTS PURCHASED IN CANADA AND USED IN THE USA. ARE NOT COVERED BY THESE
WARRANTIES.
Limited Ninety (90) Day Warranty
TACP warrant this DVD PLAYER and its parts
against detects In materials or workmanship tor a
period of ninety (90) days after the date at original
retail purchase. DURING THE FIRST 90 DAYS
FROM THE PURCHASE DATE, TACP WILL
EXCHANGE A DEFECTIVE DVD PLAYER WITH
A NEW OR REFURBISHED PLAYER WITHOUT
CHARGE TO YOU, YOU MUST CONTACT
TOSHIBA'S CONSUMER SOLUTIONS CENTER
FOR INSTRUCTIONS ON HOW TO PROCESS
YOUR IN WARRANTY EXCHANGE REQUEST THE
CONSUMER IS RESPONSIBLE FOR ALL INBOUND
TRANSPORTATION AND INSURANCE CHARGES
FOR THE DVD PLAYER TO THE EXCHANGE
CENTER. DURING THE PERIOD FROM 91 DAYS
AND BEWND. FROM THE PURCHASE DATE. TACP
WILL EXCHANGE A DEFECTIVE DVD PLAYER
WITH A NEW OR REFURBISHED PLAYER FOR A
NOMINAL FEE. YOU MUST CONTACT TOSHIBA'S
CONSUMER SOLUTIONS CENTER FOR INSTRUC-
TIONS ON HOW TO PROCESS YOUR EXCHANGE
REQUEST. THE CONSUMER IS RESPONSIBLE
FOR ALL INBOUND TRANSPORTATION AND
INSURANCE CHARGES FOR THE DVD PLAYER
TO THE EXCHANGE CENTER.
“Rental Units
The wananty for rental units begins with the lirst
rental or thirty (30) days from the date of shipment to
the rental firm, whichever comes first.
“Commercial Units
DVD PLAYERS sold and used for commercial purpos—
es have a limited ninety (90) day warranty for all parts.
labor,
70
f” J2 voiAlEleS-mcxpes 7a
Owner's Manual and Demographic Card
Vou should read this owner‘s manual thoroughly
before operating this DVD PLAYER. You should com-
plete and mail the enclosed Demographic card within
ten days after you, or the person who has given you
this product as a gift. purchased this DVD PLAYER.
This is one way to enable TACP to provide you with
better customer service and improved products.
Failure to return the Demographic card will not allect
your rights under this warranty.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill ol sale or other proof
0! purchase,
(2) All warranty servicing oi this DVD PLAYER must
be made by an Authorized TACP Service Station.
(3) The warranties irom TACP are ellective only it the
DVD PLAYER is purchased and operated in the
USA or Puerto Rico.
(4) Labor service charges for set installation, set up,
adjustment Oi customer Controls and installailon
or repair of antenna systems are not covered by
these warranties. Reception problems caused by
lnadequate antenna systems are your
responsibility.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend
to any DVD PLAYER or parts which have been
lost or discarded by you or to damage to DVD
PLAYER or parts caused by misuse. accident,
Acts oi God, such as lightning or lluctuations in
electric power, improper installation, improper
malntenance or use in violation of lnstrucllons
lumished by TACP: or to units which have been
modified or had the serial number removed.
altered. delaced or rendered illegible.
team, 337 PM
How to Obtain Warranty Services
If. after lollowing all of the operating instructions in this
manual and checking the seCIion 'Tr0ubleshoollng",
you find that service is needed:
(1) For instructions on how to obtain warranty service
tor exchange program DVD Players, Contact
TACP'S loll Iree Call Center at 1-866-583-7353.
(2) Include your bill of sale or other prool ol purchase
along with the DVD player. when sending it to the
Authorized TACP Service Station SPECIFiED by
TACPs Call Center. You must pay tor all
transportation and insurance charges for the DVD
Product to and trorn the Service Station.
For additional information, visit TACP'S Web site:
wwwtacgtoshibecom
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
STATE OF THE U.S.A.. INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FIT»
NESS FOR A PARTICULAR PURPOSE, ARE
EXPRESSLY LIMITED TO THE DURATION OF THE
LIMITED WARRANTIES SET FOFITH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED
BY THE LAW OF ANY STATE OF THE U.S.A. AS
HEREBY LIMITED, THE FOREGOING WARRANTY
IS EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES. GUARANTEES, AGREEMENTS
AND SIMILAR OBLIGATIONS OF TACP OR THI
WITH RESPECT TO THE REPAIR OR REPLACE»
MENT OF ANY PARTS. IN NO EVENT SHALL TACF
BE LIABLE FOR CONSEQUENTIAL OR INCIDEN-
TAL DAMAGES,
No person, agent, distributor, dealer or company is
authorized to change, modify or extend the terms oi
these wananties in any manner whatsoever. The time
wlthin which action must be commenced to enforce
any obligation oi TACP arising under this warranty or
under any law oi the United States or at any state
thereof Is hereby limited to 90 days Irom the date you
discovered or should have discovered. the detect. This
limitation does not apply to implied warranties arising
under the law of any state of the U.S,A,
7‘ ‘ Jzueovom iEIvGS-MCKpGS 71
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO STATE
IN THE US A. SOME STATES OF THE USA. DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS. WHEN AN ACTION
MAY BE BROUGHT. OR THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE AFOREMENTIONED
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY
TO YOU UNDER SUCH CIRCUMSTANCES,
, 195m 337 PM
71
fir
TOSHIBA
“JZDROWHA’
04/06 E aned in Thailand
7‘ ‘ JzDewmALEvpes-EACK 955 72 , ‘as‘m‘acw PM ‘ If

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2004:05:26 13:16:35Z
Modify Date                     : 2004:05:27 19:18:11+09:00
Page Count                      : 36
Creation Date                   : 2004:05:26 13:16:35Z
Author                          : mhashimoto
Producer                        : Acrobat PDFWriter 4.0 Windows
Mod Date                        : 2004:05:27 19:18:11+09:00
Metadata Date                   : 2004:05:27 19:18:11+09:00
Title                           : ]
Creator                         : mhashimoto
Has XFA                         : No

EXIF Metadata provided by EXIF.tools