ORION ELECTRIC M2E5A DVD/VCR TV Interface Device User Manual

Download:
Mirror Download [FCC.gov]
Document ID	466061
Application ID	OhHvkZYDnFtMIZHQ3gu+Kw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	58.36kB (729524 bits)
Date Submitted	2004-09-07 00:00:00
Date Available	2004-09-07 00:00:00
Creation Date	2004-09-01 10:08:03
Producing Software	Acrobat Distiller 3.0 for Power Macintosh
Document Lastmod	2004-09-03 10:15:34
Document Title	User Manual

OWNER'S MANUAL
DVD PLAYER/Hi-Fi VIDEO CASSETTE RECORDER
VRDVD4001AC
ATTENTION
If you purchase a universal remote control from your local retailer, please contact
the remote manufacturer for the required programming code.
TV/CABLE MODE SELECTION
When shipped from the factory, the TV/CABLE menu option is set to the "CABLE"
(Cable Television) mode.
If not using CABLE (Cable TV), set this menu option to the "TV" mode.
ORION WEBSITE
FOR INFORMATION ON OUR OTHER PRODUCTS,
PLEASE VISIT OUR WEBSITE AT
WWW.ORIONSALESINC.COM
Before operating the unit, please read this manual thoroughly.
2E50401A[E] Cover
9/1/04, 10:05
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle is
intended to alert the user to the presence
of uninsulated dangerous voltage within
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the FCC
Rules could void the user's authority to operate this equipment.
CAUTION:
THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR
FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER
RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
2E50401A[E](02-05)
9/1/04, 10:05
IMPORTANT SAFEGUARDS
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or
near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3125A
to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit
should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided and/or the
manufacturer’s instructions have been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the
type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate
from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized plug, if your unit is equipped with a 3-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you
are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and
power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that
could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to
provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
2E50401A[E](02-05)
9/1/04, 10:05
IMPORTANT SAFEGUARDS
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine
that the unit is in proper operating condition.
22. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.
23. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
24. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall
outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other
equipment carefully and follow the instructions when making any connections.
25. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It
may cause sight damage.
26. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury
and product malfunction.
27. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the CABLE TV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMP
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
CONDENSATION
Moisture will form in the operating section of the DVD/VCR if the player is brought from cool surroundings into a warm room
or if the temperature of the room rises suddenly. When this happens, the DVD/VCR's performance will be impaired.
To prevent this, let the DVD/VCR stand in its new surroundings for about an hour before switching it on, or make sure that the
room temperature rises gradually.
Condensation may also form during the summer if the DVD/VCR is exposed to the breeze from an air conditioner. In such
cases, change the location of the DVD/VCR.
2E50401A[E](02-05)
9/1/04, 10:05
Features
DVD/CD Player/Video Cassette Recorder
• DVD/CD player with Video Cassette Recorder - Unique space saving design combines a DVD/CD player and a Hi-Fi Video
cassette recorder. The DVD disc has much more capacity, but is the same size as the audio CD disc. Picture quality is higher than
Super VHS. Audio quality is higher than audio CD. The DVD PLAYER can play back audio CDs.
• High Quality Picture - More than 500 lines (VCR mode: 230 lines) of Horizontal Resolution. It exceeds Super VHS (400 lines)
or Laser Disc (430 lines) in resolution.
VCR Section
• Stereo/SAP Reception - This VCR is designed to receive stereo and second audio program (SAP) broadcasts where
available.
• 4 Video Heads - Provides optimal picture quality for special effects playback.
• 19µm HEAD - For superior picture quality even in SLP mode, 19 micron width technology helps to avoid crosstalk and boost
SLP picture quality to near SP levels. With precision technology, ghosts and color beats are virtually eliminated.
• Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB, this VCR
provides a level of excellence that rivals compact discs.
• One-touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the VCR can be programmed for up to 6
hours of recording with an immediate start.
DVD Section
• Compatible with a wide range of DVD audio outputs
Digital Audio Jack (Optical or Coaxial):
• When a component with a built-in Dolby Digital decoder is connected, Dolby Digital sound can produce the effect of being
in a movie theater or a concert hall.
• Surround standard different from Dolby Digital. This format is already in use in many theaters. By connecting this unit to a
DTS decoder or an AV amplifier with a built-in DTS decoder, the DTS audio of DVD discs recorded in this format can be
enjoyed. However, audio will not be output from the analog audio output jacks.
• The MPEG audio of DVD discs recorded in this format can be enjoyed.
• The Linear PCM sound of a 48 kHz/16 bit through 96 kHz/24 bit exceeds audio CD sound.
• Progressive scan - Progressive scan displays all the horizontal lines of a picture at one time, as a single frame. This unit
converts the interlaced (480i) video from DVD into progressive (480p) format for connection to a progressive display. It
increases the vertical resolution.
• Multi-Language - Since this DVD matches with 124 language-subtitles/-soundtracks, you can enjoy selecting a favorite one
(You cannot select the language that is not recorded on the disc).
• Multi-Angle - Pictures of Sports or a Live Concert are recorded with many cameras. When you play such a disc, you can
change the angles during playback (If a Multi-Angle is not recorded on the disc, you can not change the angle).
• Repeat Playback - You can repeat chapter, track, title, sides or material between two selected points.
• Program/Random Playback (CD) - You can play back tracks in programmed or random-selected sequences.
• Zoom - You can zoom in on the selected subject on the screen during playback.
• Video Aspect Ratio - You can change the aspect ratio of the screen for your monitor/television on a suitable disc.
• Parental Control - You can limit the playback of scenes or sounds of adult DVD discs which have a parental level rating.
* This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
* Unauthorized recording of copyrighted television programs, films, video cassettes and other materials may infringe the
rights of copyright owners and be contrary to copyright laws.
2E50401A[E](02-05)
9/1/04, 10:05
Contents
IMPORTANT SAFEGUARDS .................................. 3
Disc playback operation ......................................... 23
Features ................................................................... 5
Disc ................................................................... 23
Contents ................................................................... 6
Setting setup language ..................................... 23
Parts and functions .................................................. 7
Playback procedure .......................................... 24
Remote control ......................................................... 8
Special playback ............................................... 24
Power source ........................................................... 9
Zooming ............................................................ 24
Basic connections .................................................. 10
Locating desired scene ..................................... 25
Antenna to DVD/VCR connection ..................... 10
Marking desired scenes .................................... 25
DVD/VCR to TV connection .............................. 10
Changing soundtrack language ........................ 25
CABLE TV connections ......................................... 11
Subtitles ............................................................ 25
Playback connections ............................................ 12
Karaoke playback ............................................. 25
Setting up the VCR section .................................... 14
Changing angles ............................................... 26
Setting the video channel .................................. 14
Title selection .................................................... 26
Setting the language ......................................... 14
DVD menu ........................................................ 26
Auto clock setting .............................................. 15
Repeat playback ............................................... 26
Manual clock setting ......................................... 16
Program playback (CD) .................................... 26
Tuner setting ..................................................... 16
Random playback (CD) ..................................... 27
To add/delete channels ..................................... 16
MP3 playback ................................................... 27
Noise elimination ............................................... 16
Advanced function of DVD section ........................ 28
Tape playback operation ........................................ 17
Parental control ................................................. 28
Loading and Unloading a cassette tape ............ 17
Cassette tape playback ..................................... 17
Temporary disabling of rating level by
DVD disc ........................................................... 28
Special playback ............................................... 17
Setting language ............................................... 29
ZERO RETURN function .................................. 18
Setting the aspect ratio of TV screen ................ 29
Video index search system ............................... 18
Setting on screen display .................................. 30
Recording ............................................................... 19
Status display of disc ........................................ 30
Recording a TV program ................................... 19
Dynamic Range Control .................................... 30
One-touch Timer Recording (OTR) ................... 20
Progressive scan .............................................. 30
Timer recording ................................................. 20
Language code list ................................................. 31
Advanced function of VCR section ........................ 22
Problems and troubleshooting ............................... 32
Stereo recording and playback ......................... 22
Video head cleaning .............................................. 33
Second audio program (SAP) ........................... 22
Specifications ......................................................... 34
Duplicating a video tape .................................... 22
Limited WARRANTY .............................................. 35
2E50401A[E](06-09)
9/1/04, 10:05
Parts and functions
Front
VCR/DVD mode selector button
Cassette Loading Slot
OPEN/CLOSE button
PLAY button
STOP button
EJECT button
Disc tray
Remote sensor
POWER
button
CHANNEL
VCR indicator
DVD indicator
Display window
buttons
AUDIO (L/R)/VIDEO IN jacks
REC/OTR button
FF (Fast Forward)
button
REW (Rewind) button
Display window
Play indicator
VCR indicator
Pause indicator
DVD indicator
REC indicator
CD indicator
TRK indicator
PM indicator
Video tape indicator
Number indicator (Title, Chapter, Track playing time or other information)
Progressive scanning indicator
Timer recording indicator
NOTE:
Some discs may be displayed wrong or e.g. chapter number, playback time, etc. may not be displayed.
Rear
DVD COAXIAL DIGITAL AUDIO OUT jack
DVD S-VIDEO OUT jack
DVD/VCR common AUDIO (L/R)/VIDEO OUT jacks
AC power cord
RF IN jack
RF OUT jack
DVD AUDIO (L/R) OUT jacks
DVD OPTICAL DIGITAL AUDIO OUT jack (dust protection cap)
DVD COMPONENT OUT jacks
S-VIDEO/COMPONENT Video selector switch
2E50401A[E](06-09)
9/1/04, 10:05
Remote control
POWER [9]
VCR/DVD [9]
OPEN/CLOSE [24]
EJECT [17]
TIMER REC [20]
0 – 9 [16]
INPUT SELECT [22]
PROGRESSIVE [30]
DISPLAY [15] [25]
RETURN [23]
TOP MENU [26]
SETUP [23]
VCR MENU [14]
CH /
[9]
TRK/SET + / – [14]
Cursor Buttons [15]
ENTER [14]
DVD MENU [26]
CANCEL [21]
PLAY [17] [24]
STOP [17] [24]
PAUSE/STILL [18] [24]
SKIP [24]
INDEX + / – [18]
SEARCH + / – [17] [24]
SLOW [18] [24]
MARKER [25]
CLOCK/COUNTER [18]
AUDIO [25]
AUDIO SELECT [22]
TV/VCR [14]
REC/OTR [19]
REPEAT A-B [26]
ZOOM [24]
ANGLE [26]
COUNTER RESET [18]
JUMP [25]
ZERO RETURN [18]
PLAY MODE [26]
SPEED [19]
SUBTITLE [25]
ATR [18]
2E50401A[E](06-09)
9/1/04, 10:05
Remote control / Power source
Inserting Batteries
Open the battery
compartment cover in the
direction of the arrow.
two “AAA” batteries (not
2 Install
supplied), paying attention to the
Replace the compartment
cover.
polarity diagram in the battery
compartment.
Battery precautions
The precautions below should be followed when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device. To avoid a potential short circuit, insert the “–” end first.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery manufacturer’s directions).
Remote control basics
•
•
•
•
•
Press POWER to turn the DVD/VCR on or off.
or CH
to move through the channels one channel at a time.
Press CH
The CH / and SET +/– are also used to navigate on-screen menu system.
You can directly access specific channels using Number keys pad.
Each press of VCR/DVD on the remote control, switches the screen between the VCR screen (VCR mode) and the DVD
screen (DVD mode).
Operation
• Aim the remote control at the remote sensor and press control buttons to operate.
• Operate the remote control within 30° angle on either side of the remote sensor,
up to a distance of Approx. 5 meters.
Approx. 5 meters
Power source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC
cord plug into a standard 120V 60Hz polarized AC outlet.
NOTES:
• Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
• If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
• If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
2E50401A[E](06-09)
9/1/04, 10:05
Basic connections
Antenna to DVD/VCR connection
DVD/VCR to TV connection
The DVD/VCR must be connected “between” the antenna and
the TV. First, disconnect the antenna from the TV and connect
it to the DVD/VCR. Then connect the DVD/VCR to the TV.
Below are 3 common methods of connecting an antenna system to a DVD/VCR. Find the type of antenna system you are
using and follow the connection diagram.
Example 1: Combination VHF/UHF antenna with 75 ohm
coaxial cable
After you have connected the antenna to the DVD/VCR, you
must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR
to a TV. Find the type of TV you are using and follow the connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a
TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to
the TV for VHF and UHF reception.
Example 1: TV with single 75 ohm VHF/UHF antenna
input
75 ohm coaxial
cable
IN
(ANT)
TV
75 ohm coaxial
cable (supplied)
OUT
(TV)
DVD/VCR
IN
(ANT)
VHF/UHF
IN (ANT)
OUT
(TV)
Example 2: Combination VHF/UHF antenna with 300 ohm
twin lead (flat) wire
Matching transformer
300 ohm input 75 ohm
output (not supplied)
DVD/VCR
Example 2: TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
TV
75 ohm coaxial cable
(supplied)
IN
(ANT)
300 ohm twin lead
(flat) wire
OUT
(TV)
DVD/VCR
VHF
OUT
(TV)
Splitter 75 ohm input
75/300 ohm outputs
(not supplied)
DVD/VCR
Example 3: Separate VHF and UHF antennas
Combiner
75/300 ohm inputs
75 ohm output (not supplied)
VHF
UHF
300 ohm twin
lead (flat) wire
UHF
IN
(ANT)
Example 3: TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
TV
IN
(ANT)
75 ohm coaxial cable
(supplied)
OUT
(TV)
IN
(ANT)
75 ohm coaxial
cable
DVD/VCR
UHF
VHF
OUT
(TV)
NOTE:
If both VHF and UHF antennas have 300 ohm twin lead (flat)
wires, use a combiner having two 300 ohm inputs and one 75
ohm output.
DVD/VCR
NOTES:
• A clear picture will not be obtained by the main unit unless
the antenna signal is good. Connect the antenna to the
main unit properly.
• For better quality recording, an indoor antenna or a telescopic
antenna is not recommended. The use of an outdoor type
antenna is required.
• If you are not sure about the connection, please refer to
qualified service personnel.
NOTE:
If a VHF or UHF antenna is used, set the TV/CABLE menu
option to the “TV” mode.
Splitter 75 ohm input
300 ohm output
(not supplied)
10
2E50401A[E](10-17)
10
9/1/04, 10:05
CABLE TV connections
Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This DVD/
VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter
box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you
must have a descrambler box for proper reception.
Example 1:
DVD/VCR
TV
IN
(ANT)
VHF/UHF
IN (ANT)
Incoming Cable
OUT
(TV)
ALLOWS: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
Example 2:
DVD/VCR
TV
Converter/
Descrambler
IN
(ANT)
Incoming
Cable
VHF/UHF
IN (ANT)
OUT
(TV)
ALLOWS: * Recording of channels through the converter box
(scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter box.
PREVENTS: * Recording one channel while watching another.
* Using the DVD/VCR tuner to select channels.
Example 3:
NOTE:
To record from converter/descrambler, DVD/
VCR tuner must be tuned to the converter
output channel, usually channel 3 or 4.
DVD/VCR
TV
IN
(ANT)
Converter/Descrambler
Incoming Cable
VHF/UHF
IN (ANT)
OUT
(TV)
ALLOWS: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording an unscrambled channel while watching any
channel selected at the converter box.
PREVENT:
NOTE:
Recording scrambled channels.
NOTE:
If you are playing a tape or using the tuner
built into the DVD/VCR, the converter must
be set to the video channel output of the DVD/
VCR (either 3 or 4).
Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output
of the Converter/Descrambler box, usually channel 3 or 4.
11
2E50401A[E](10-17)
11
9/1/04, 10:05
Playback connections
The exact arrangement you use to interconnect various video and audio components to the DVD/VCR is dependent on the model
and features of each component. Check the Owner's Manual provided with each component for the location of video and audio
inputs and outputs.
Connect to a TV with Audio/Video Output
You can enjoy playback by connecting the unit to a TV.
Connect the unit to a TV equipped with audio input (L/R) and video input jacks using the supplied audio/video cable.
TV
DVD/VCR
Video Output
Audio (L) Output
Audio (R) Output
To Video
Input
To Audio (R) Input
To Audio (L) Input
AUDIO/VIDEO cable (supplied)
Connect to a TV with S-Video Output (for DVD/CD playback)
If your TV has an S-VIDEO input, you can get higher quality by connecting it with the S-VIDEO output of the unit using the Svideo cable instead of connecting the video input of the TV to the VIDEO jack of the unit.
TV
S-Video cable (not supplied)
DVD/VCR
To S-Video
Input
S-Video Output
S-VIDEO/COMPONENT
Video selector switch
To Audio (R) Input
Audio (L) Output
Audio (R) Output
To Audio (L) Input
AUDIO cable (not supplied)
Connect to a TV with Component Video Output (for DVD/CD playback)
You can enjoy high quality picture by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN
jacks of your TV with the COMPONENT video cables (not supplied).
TV
DVD/VCR
To Component
Video Output
To Component Video Input
COMPONENT VIDEO cable (not supplied)
NOTES:
• When you connect to a TV with S-video jack or component jacks, set the S-VIDEO/COMPONENT Video selector switch to
the desired position. And also you must select the corresponding video input on your TV.
• When connecting to a TV using the VIDEO or S-VIDEO jack, make sure that the PROGRESSIVE indicator on the
display window is not lit. If it is lit, the VIDEO and S-VIDEO outputs do not feed the correct signals and you cannot
see any picture. To turn off the PROGRESSIVE indicator, make the Progressive scanning mode inactive
(see page 30).
• When the component video input jacks on a TV is of the BNC type, use an adapter to convert a pin jack to a BNC jack
(not supplied).
12
2E50401A[E](10-17)
12
9/1/04, 10:05
Playback connections
Connect to a Stereo Amplifier with Audio Output
You can enjoy high quality audio by connecting the audio output to your amplifier.
Connect the AUDIO OUT jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier.
DVD/VCR
Stereo Amplifier
Audio (L) Output
Audio (R) Output
To Audio (L) Input
AUDIO cable (not supplied)
To Audio (R) Input
Connect to an AV Amplifier with built-in digital surround
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems such as Dolby
Digital and DTS by using the Optical or Coaxial Digital Output.
Use this connection to connect an:
• AV amplifier with built-in *Dolby Digital decoder
• AV amplifier with built-in *DTS decoder
Video cable (not supplied)
DVD/VCR
To Video
Input
Video Output
TV
Coaxial Digital Audio Output
Coaxial digital cable (not supplied)
AV Amplifier with
built-in various
decoder as above
NOTE:
You may connect to a TV with a Component video cable (not supplied) or SVideo cable (not supplied) instead of a
video cable (not supplied).
Connecting the optical digital cable
You may connect to an AV Amplifier with an Optical digital cable (not supplied) instead of a Coaxial digital cable.
When you connect the optical digital cable (not supplied), remove the dust protection cap from the rear panel.
When not using the optical digital cable, attach the dust protection cap to protect against dust.
NOTES:
• The DVD OUTPUT jacks (OPTICAL, COAXIAL, AUDIO L/R, S-VIDEO and COMPONENT) are useful only for DVD section.
• The VHS signal is output only from the composite jacks (DVD/VCR OUTPUT) and UHF/VHF OUT.
• When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL or DTS to ON on the AV Amplifier. If
you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be damaged.
• Caution for the optical digital audio output connector: Do not connect to an amplifier (with an optical digital input connector)
which does not contain a Dolby Digital or DTS decoder. Otherwise, any attempt to play DVDs may cause such a high level of
noise that it may be harmful to your ears and damage your speakers.
• DTS audio will be output only from the COAXIAL or OPTICAL output. To hear DTS audio, DTS-Decoder is necessary.
• When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.
• Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.
13
2E50401A[E](10-17)
13
9/1/04, 10:05
Setting up the VCR section
Setting the video channel
To view playback of a recorded tape or DVD disc, or to
watch a program selected by the VCR's channel
selector, the TV must be set to channel 3 or 4 (video
channel).
Setting the language
You can choose from three different languages
(English, French and Spanish) for the on-screen displays.
Press VCR MENU.
MENU
TIMER REC SET
The VCR menu screen
AUTO REPEAT ON OFF
will appear. Press SET +
ON OFF
SAP
CH SETUP
or – to select the
SYSTEM SETUP
“SYSTEM SETUP” menu,
then press ENTER.
〈+/-/ENTER/MENU〉
If you use the unit for the
first time and press VCR
MENU, instead of the main menu screen on the right the
“SYSTEM SETUP” menu screen in step 2 may appear.
Press SET + or – to select
the “LANGUAGE” option,
then press ENTER.
When a TV is connected with the 75 ohm coaxial cable only.
Press and hold 3 or 4 on the
remote control for 3 seconds
in the standby mode to select
CH 3 or 4. The selected channel number will flash on the display for about 4 seconds.
Turn ON the TV and set to CH 3 or 4 to correspond with
the channel selected in step 1.
Press POWER to turn on the DVD/VCR.
Press VCR/DVD to select the VCR mode. The VCR
indicator on the front panel will light.
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display.
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be
tuned on your TV, proceed as follows: set the VCR 3/4
channel selector and the TV to CH 3 or 4, play back a
prerecorded tape and tune the TV to receive a sharp color
picture from the video cassette recorder. Refer to your TV
owner's manual for details.
Press SET + or – to select
the desired language: English (ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.
Press VCR MENU until the MENU screen is cleared.
NOTES:
• When shipped from factory, the video channel is set to
CH 3.
• If the unit does not operate properly, or No key operation (by the unit and/or the remote control): Static electricity, etc., may affect the player's operation. Disconnect the
AC power cord once, then connect it again.
NOTES:
• Both the VCR and the DVD have their own menu option
(See page 23).
• If no buttons are pressed for more than 60 seconds, the
MENU screen will return to normal TV-operation automatically.
14
2E50401A[E](10-17)
14
9/1/04, 10:05
Setting up the VCR section
Auto clock setting
The Auto clock function will automatically set the builtin clock (Month, Day, Year and Time) when the unit is
connected to an Antenna or Cable system and it is
turned off. As the unit searches for a receivable station
in your area and it receives a broadcast signal for Auto
clock, the Auto clock needs several minutes to set
itself.
Connect the Antenna or Cable system.
• If you use a cable box, turn it on.
Plug the AC Power cord to the AC outlet.
Make sure the unit is turned off.
• If you press POWER, the Auto Clock set is not effective.
Wait at least three minutes and press POWER.
Press DISPLAY to check the clock on the screen.
If the clock is not set, check the Antenna condition. The
Auto Clock may not function properly if the reception condition is not good.
Auto clock adjustment
The Auto clock Adjustment will be performed at 12:00 PM
everyday if you turn off the unit.
• If you use a cable box and you want Auto clock adjustment
to be performed, the cable box must be left on.
• The Auto clock Adjustment is not effective when there is a
difference of more than 5 minutes exists between the
built-in clock time and the actual time.
When shipped from factory the “AUTO CLOCK” option is set
to ON.
But if you do not want Auto clock set (Adjustment):
1 Turn on the unit.
2 Press VCR MENU.
3 Press SET + or – to select the “SYSTEM SETUP”
option, then press ENTER.
4 Press SET + or – to select the “AUTO CLOCK” option.
5 Press ENTER to select “OFF”.
6 Press VCR MENU repeatedly to return to the normal
screen.
• When the “AUTO CLOCK” is set to “OFF”, the Auto clock
adjustment does not function.
• Set the clock manually (see page 16).
To set standard time
In the rare event that you live within broadcast range of two
stations in two different time zones, the unit may recognize
the wrong station for the Auto clock set.
To correct the situation:
1 Press VCR MENU.
2 Press SET + or – to select the “SYSTEM SETUP” option,
then press ENTER.
3 Press SET + or – to select the “STANDARD TIME” option,
then press ENTER.
ATLANTIC
EASTERN
CENTRAL
MOUNTAIN
PACIFIC
ALASKA
HAWAII
AUTO
GMT – 4 hours
(GMT: Greenwich Mean Time)
GMT – 5 hours
GMT – 6 hours
GMT – 7 hours
GMT – 8 hours
GMT – 9 hours
GMT – 10 hours
AUTO SET
Press VCR MENU twice to return to the normal screen.
NOTE:
To be able to select the standard time, the clock must first
be set by “AUTO CLOCK” once.
Daylight saving time setting
You can set the Daylight saving time automatically or
manually.
To set auto clock to off
Press SET + or – to select your time zone, then press
ENTER.
Press VCR MENU. Press SET +
or – to select the “SYSTEM
SETUP” option, then press
ENTER.
Press SET + or – to select the
“DAYLIGHT SAVING TIME”
option, then press ENTER.
Press SET + or – to select one of
the options, then press ENTER.
Press VCR MENU until the
MENU screen is cleared.
ON:
for manual setting
(forward one hour)
OFF:
for manual setting
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SETUP
SYSTEM SETUP
OFF
OFF
〈+/-/ENTER/MENU〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
〈+/-/ENTER/MENU〉
DAYLIGHT SAVING TIME
ON
OFF
AUTO
+/-/ENTER/MENUñ
á
When you want to set the Daylight Saving Time manually, on
the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.
NOTES:
• When shipped from factory, the “DAYLIGHT SAVING TIME”
option is set to “AUTO” position.
• When the clock is not set, Daylight Saving Time setting is
not available.
• When there is no Daylight Saving Time in your area, always
select “OFF” position in step 3.
15
2E50401A[E](10-17)
15
9/1/04, 10:05
Setting up the VCR section
Manual clock setting
Automatic memory tuning
You must set the date and time manually for Timer
Recordings, ON/OFF Timer and Daylight Saving Time if
the Auto clock process did not set them correctly.
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
Example: Setting the clock to “8:30 AM”, 30th (SAT)
October, 2004.
Press VCR MENU.
Press SET + or – to select the
“SYSTEM SETUP” option, then
press ENTER.
Press SET + or – to select the
“CLOCK SET” option, then press
ENTER.
Press SET + or – to set the month,
then press ENTER.
Set the day, year and time as in
step 3.
MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SETUP
SYSTEM SETUP
OFF
OFF
〈+/-/ENTER/MENU〉
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
After setting the clock, date and time
starts functioning automatically.
NOTES:
• After a 30 minute power failure or disconnection of the
power plug, the time display will be lost. In this case, set
the present time again if the Auto clock did not set correctly.
• To move cursor backward, press CANCEL.
〈+/-/ENTER/MENU〉
To add/delete channels
Press VCR MENU.
Press SET + or – to select the “CH
SETUP” mode, then press ENTER.
Press SET + or – to select the
“ADD/DELETE” mode, then press
ENTER.
10
30 (SAT)
2004
8 : 30 AM
〈+/-/ENTER/CANCEL/MENU〉
The unit will begin memorizing all
the channels available in your
area.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
You can add the channels you want or delete the channels you do not want manualy.
〈+/-/ENTER/MENU〉
MONTH
DAY
YEAR
TIME
In the CH SETUP menu, press
SET + or – to select "AUTO CH
MEMORY", then press ENTER.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU〉
Select the desired channel to be
memorized or deleted using SET
+ or – button, or using Number
keys.
Press ENTER to select the “ADD”
or “DELETE”.
Press VCR MENU until the MENU screen is cleared.
ADD
CH 003
〈+/–/0–9/ENTER/MENU〉
Tuner setting
This DVD/VCR is equipped with a channel memory
feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted
channels. Before selecting channels, they must be
programmed into the DVD/VCR’s memory. In addition to
normal VHF and UHF channels, this DVD/VCR can
receive up to 113 Cable TV channels. To use this DVD/
VCR with an antenna, set the TV/CABLE menu option to
the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
TV/CABLE selection
Press VCR MENU.
Press SET + or – to select the “CH
SETUP” mode, then press ENTER.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
Noise elimination
When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND “ON”. When the unit is
shipped from the factory, the NO NOISE BACKGROUND
is set to the “ON”.
In the “SYSTEM SETUP” menu,
press SET + or – to select “ NO
NOISE BACKGROUND”.
Press ENTER to select the “ON”
position.
+/-/ENTER/MENUñ
Press SET + or – to select the
TV/CABLE mode.
Press ENTER to select the TV or
CABLEmode.
The arrow indicates the selected
mode.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
〈+/-/ENTER/MENU〉
TV
- VHF/UHF channels
CABLE - CABLE TV channels
Press VCR MENU until the MENU screen is cleared.
16
2E50401A[E](10-17)
16
〈+/-/ENTER/MENU〉
Press VCR MENU until the menu screen is cleared.
á
SYSTEM SETUP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
AUTO CLOCK
ON OFF
STANDARD TIME
DAYLIGHT SAVING TIME
9/1/04, 10:05
Tape playback operation
Loading and Unloading a cassette tape
Cassette tape playback
Loading
Load a prerecorded tape (When loading a cassette tape
without the erase prevention tab, playback will start automatically).
Push the center of the tape until it is automatically retracted
into the unit.
To start playback
Automatic power on and play
Press PLAY to begin playback.
“ ” will appear on the screen.
Use only video cassette tapes marked
When loading a cassette tape without the erase prevention
tab intact, the unit will turn on automatically and playback will
start immediately.
To stop playback
Press STOP once.
The tape will stop, but remain fully loaded and ready to play.
“
” will appear on the screen.
Insert the cassette with its labeled side facing you.
An inverted video cassette cannot be inserted.
Unloading
Automatic eject
NOTES:
• This unit selects the playback tape speed SP, LP or SLP
automatically.
• The Cassette tape and DVD disc can be played back simultaneously. If you press VCR/DVD, the tape playback and
DVD playback alternate with each other on the screen.
If the unit automatically rewinds the tape to the beginning
(AUTO REWIND FEATURE), the tape will be ejected
automatically.
To rewind or forward the tape rapidly
To unload a video cassette, press EJECT on the remote
control, or press 5 (EJECT) on the unit.
Press REW or F.FWD in the Stop mode.
“
” or “ ” will appear on the screen.
To prevent accidental erasure
After recording, break off the erase prevention tab if you do
not wish to record over the tape.
Screwdriver
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape during REW or FWD mode, press
and hold the REW or F.FWD. The backward or forward
visual search picture will be seen on the screen. Release to
return to the REW or FWD mode.
Special playback
Picture Search
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Erase prevention tab
To record again
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges of the
video cassette housing.
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
SPEED SEARCH TIMES
TAPE SPEED
Adhesive tape
Tape Speed
PICTURE SEARCH SPEED
PRESS ONCE PRESS TWICE
SP (Standard Play)
3X
LP (Long Play)
7X
9X
SLP (Super Long Play)
9X
15 X
5X
Still Picture
Video cassette tape
T-160
T-120
T-60
SP (Standard Play)
2-2/3 hours
2 hours
1 hour
SLP (Super Long Play)
8 hours
6 hours
3 hours
Press PAUSE during playback. To resume normal playback:
Press PLAY.
17
2E50401A[E](10-17)
17
9/1/04, 10:05
Tape playback operation
Slow Motion
ZERO RETURN function
During playback press SLOW.
To return to playback: Press PLAY or SLOW.
This function makes tape-rewinding stop at the counter
00:00:00 position automatically.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion, press
the TRK + or – to reduce the noise bars.
If the still picture jitters excessively, press TRK + or – to
stabilize the still picture.
Frame by Frame Picture
Press PAUSE during playback.
Press SLOW one by one: The picture advances frame by
frame.
To return to playback: Press PLAY or PAUSE.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the signal
to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press TRK +/– to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine adjustment,
or press and hold for a coarse adjustment.
• Press ATR to reactivate automatic tracking again.
“AUTO TR.” will appear.
Repeat playback
The entire video tape will be played until its end. The tape will
then automatically rewind to the beginning and the playback
will be repeated.
Press VCR MENU. Press SET + or – to select “AUTO
REPEAT”.
Then press ENTER to select “ON” or “OFF”.
If “ON” is selected, the playback will be repeated endlessly.
MENU
TIMER REC SET
AUTO REPEAT ON
ON
SAP
CH SETUP
SYSTEM SETUP
VCR
Press DISPLAY.
The counter display shows the tape
running time during playback or recording.
VCR
Press COUNTER RESET at the
desired tape position. The counter
display will be reset to the “00:00:00”
position (e.g. the beginning of recording).
Press STOP when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically stop at the “00:00:00” position.
The CLOCK/COUNTER-button
Press CLOCK/COUNTER. The clock and tape counter alternate with each other in the display.
NOTES:
• If you rewind the tape beyond “00:00:00”, a minus sign
(“–”) will be displayed in front of the time.
• When you load a tape, the counter will reset to “00:00:00”.
• The counter does not function on nonrecorded (blank) sections of the tape. When you rewind, fast forward or play tapes
through blank sections, the counter stops.
Video index search system
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
OFF
OFF
The Index Search function automatically records an INDEX
mark on the tape whenever a recording is initiated.
Index Search
Press VCR MENU until the menu screen is cleared.
if you press DISPLAY, “ ” will appear on the screen.
To start the playback, press PLAY.
The playback will be repeated endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select the
OFF position. Press VCR MENU to return to the TV.
NOTES:
• The audio output is muted during Picture Search, Still Picture,
Frame by Frame Picture and Slow Motion.
• During picture search mode there will be noise bars which are
caused by the system.
• The Special Playback will automatically change to playback
after approx. 5 minutes to protect the video tape against
excessive wear.
Press INDEX
or
during stop or play mode.
For Succeeding programs: Press INDEX
For Preceding programs: Press INDEX
(Additional press increases the INDEX NO. up to 9.)
When the INDEX
or
is pressed, the unit starts
searching the INDEX NO. selected and finds the portion,
then playback starts automatically.
To stop the Index Search, press STOP.
NOTES:
• When you record an INDEX mark at the very beginning of the
tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play
at a slightly different location.
• INDEX may not function properly with old or worn out video
tapes.
• INDEX marks may not be found if it is extremely close to the
point where the search began.
• In recording, if you stop recording temporarily, the INDEX
mark is not recorded on the tape.
18
2E50401A[E](18-23)
18
9/1/04, 10:05
Recording
To stop recording
Recording a TV program
Press STOP to stop recording.
“ ” will appear on screen for about 4 seconds.
Recording and viewing the same TV program.
Load a cassette tape with the erase prevention tab intact.
The unit will automatically turn on.
Press SPEED to select the desired tape speed SP or
SLP.
The tape counter and SP or SLP will appear on the
screen for about 4 seconds.
Press PAUSE/STILL to avoid recording unwanted material.
“
” will appear on screen for about 4 seconds.
Press again to continue the recording.
Set the TV/CABLE option to the appropriate position
(See page 16).
Press Number keys or CH
to be recorded.
NOTES:
• The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
• You can select a recording channel in the recording pause
mode.
to select the channel
1-9
Press 0 twice and then 1-9 as required.
Example: To select 2, Press 002.
10-12
Press 0 first and then the remaining 2 digits
in order from left to right.
Example: Press 012 for “12”.
13-99
Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
CABLE
VHF
2-13
STD/HRC/IRC
14-36
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125 (100) (125)
01
(5A)
Press REC/OTR.
“ ” will appear on the screen
for about 4 seconds and “REC”
will appear on the display.
To stop recording temporarily
Recording one program while watching
another
While the VCR is recording, press TV/VCR to select the TV
position.
The “VCR” will go off and recording will continue.
Select the TV channel you want to watch by using the TV
channel selector.
NOTE:
Some CABLE hookups do not permit viewing one channel
while recording another. See page 11.
To Display VCR operation Status
Press DISPLAY. The clock, day of the week and more information will be indicated.
While watching TV
DAY OF THE WEEK
CLOCK
8 : 47AM MON
STEREO SAP
00 : 00 : 00 SP
CH 110
INDEX
NOTES:
• If the erase prevention tab is removed, the tape will eject when
REC/OTR is pressed for recording.
• If you wish to watch the DVD playback during the normal
recording on VCR, press VCR/DVD to change to DVD mode
and perform the DVD playback (see page 24).
• You can not record disc material in DVD, Audio CD, etc. onto
a video tape with this DVD/VCR.
CH 125
STEREO AND
SECOND AUDIO
PROGRAM (SAP)
CHANNEL
TAPE
SPEED
REAL TIME COUNTER
While operating a tape
HI-FI
STEREO
OPERATING
MODE
8 : 30AM MON
HI-FI
AUTO
REPEAT
00 : 15 : 12 SP
TAPE IN
To cancel the display: Press DISPLAY until all indicators
disappear.
Auto rewind feature
This VCR will automatically rewind the tape when the tape has
ended (except during OTR and TIMER REC). It will also eject
the tape.
19
2E50401A[E](18-23)
19
9/1/04, 10:05
Recording
One-touch Timer Recording (OTR)
The One-touch Timer Recording feature provides a
simple and convenient way to make a timed recording.
Example: One-touch Timer Recording for 30 minutes.
Load a cassette tape with the erase prevention tab
intact.
The VCR will automatically turn on.
Press SPEED to select the desired tape speed SP or
SLP.
The tape counter and SP or SLP will appear on the
screen for about 4 seconds.
Set the TV/CABLE option to the appropriate position.
Press Number keys or CH
to be recorded.
to select the channel
Press REC/OTR. Press the button again to stop recording after 30 minutes. Each additional press of REC/OTR
will increase recording time as shown in the chart below,
up to a maximum of 6 hours. The OTR and recording time
will appear on the screen for about 4 seconds. And, “REC”
will keep blinking in the display.
Press Recording time
NORMAL REC
once
0:30
twice
1:00
3 times
4 times
1:30
5 times
2:00
Press Recording time
3:00
6 times
4:00
7 times
5:00
8 times
6:00
9 times
10 times NORMAL REC
To cancel OTR
Press STOP or turn off the power.
“ ” will appear on screen for about 4 seconds.
NOTE:
If you wish to watch the DVD playback during the OTR, press
VCR/DVD to change to DVD mode and perform the DVD
playback (see page 24).
Timer recording can be programmed on-screen with the
remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
Example: Program a timer recording for the 26th day,
channel 125 (CABLE), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: SLP).
Press VCR MENU. Select
the “TIMER REC SET”
option, then press ENTER.
Press SET + or – to select
one of the program line,
then press ENTER.
Press SET + or – to select
the date, then press
ENTER.
Set the start time, end time,
channel and tape speed as
in step 3.
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF
SAP
CH SETUP
SYSTEM SETUP
+/-/ENTER/MENUñ
á
DATE
26(SU)
START
END
CH
11:00PM 11:30PM 125 SLP
á+/-/ENTER/CANCEL/MENUñ
NOTES:
• Press CANCEL to move cursor backward for correction.
• To record from external source set the channel to “L”. “L”
will appear next to CH 125 (or 69).
To enter other programs, repeat step 2 through 4.
• To return to the normal screen, press VCR MENU twice.
Press TIMER REC. The clock symbol( ) will appear on
the display and the VCR stands by for recording. At the
same time, VCR mode will change to DVD mode
automatically. You can use DVD even if the VCR is in
the Timer recording mode.
If you do not use the DVD, turn the power off.
The timer recording will start at 20 seconds before the
time you predetermined.
NOTES:
• If the clock symbol(
) does not appear on the display
in spite of the pressing of TIMER REC, the cassette may
not have been loaded yet. (see page 17)
• If the cassette is ejected in spite of the pressing of TIMER
REC, the erase prevention tab of the cassette may have
been removed. (see page 17)
NOTES:
• If the clock symbol ( ) blinks when the timer recording
ended, the TV program has not been completely recorded
because of an insufficient tape supply. Press TIMER REC to
cancel the timer program or press EJECT to remove the
cassette tape.
• During timer recording standby mode, the VCR mode cannot be selected. To use the VCR, press TIMER REC at first,
then press VCR/DVD to change to VCR mode. After you use
the VCR, press TIMER REC again to put the VCR into timer
recording standby mode.
• If you press TIMER REC during timer recording, the recording operation will be interrupted. If you press TIMER REC
again within the programmed time, the recording operation
will start again.
• After a 30 minute power failure or disconnection of the power
plug, all programmed recording settings and time display will
be lost upon resumption of power. In this case, reset the
clock (see page 15) and reprogram any timer recordings.
20
2E50401A[E](18-23)
Timer recording
20
9/1/04, 10:05
Recording
Timer recording special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g. MO-SA:
Monday to Saturday) Timer recording
Follow the procedure of timer recording on the previous page.
At picture 3 press SET + or – repeatedly until the desired setting
appears. Then press ENTER.
When you press SET – repeatedly, the indicator at DATE will
change as follows, in this case the day is Friday.
The current day (Friday)
Confirmation / Cancellation of the Timer
recording
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-WE
(Weekly Wednesday)
DATE
START END
CH
DATE
26(SU)
START
END
CH
11:00PM 11:30PM 125 SLP
á+/-/ENTER/CANCEL/MENUñ
To cancel Timer program:
Press SET + or – to select
the unnecessary program,
then press CANCEL to cancel the program.
WKL-TH (Weekly Thursday)
WKL-WE
To confirm Timer program:
At picture 1 on the previous
page select the “TIMER REC
SET” option and press
ENTER.
Then the timer program list
as right will appear on the
screen.
SU-SA (Sunday to Saturday)
One month later
minus one day
If the Timer has been activated, press TIMER REC to
deactivate the Timer. The clock symbol( ) will disappear. Then press VCR/DVD to change to VCR mode.
DATE
START END
CH
Ð
+/-/ENTER/CANCEL/MENUñ
á
+/-/ENTER/CANCEL/MENUñ
Press VCR MENU repeatedly until the TV-picture appears.
á
In case Timer programs-overlap
• Do not overlap timer programs as portions of the conflicting
programs will be lost. The first recording time has priority over
the next recording time as shown in the diagram below.
8 : 00
9 : 00
10 : 00
NOTES:
• If there are other timer record programs remaining, TIMER
REC must be pressed to reactivate the timer, otherwise the
remaining timer record programs will be ignored.
• You cannot confirm the Timer program during timer recording operation.
• You can also correct the programmed setting in program
confirm mode.
At step 2 above, press ENTER to enter the program input
mode. Then press ENTER repeatedly until the item you wish
to correct blinks. Then correct the data with SET + or –.
Then press VCR MENU repeatedly until the TV-picture
appears.
11 : 00
Program 1
Deleted Parts
Program 3
Non Recorded Portion Parts
Prog.1
Prog.2
START END
11:00PM 11:30PM 125 SLP
––––––
––––––
––––––
––––––
––––––
––––––
––––––
Program 2
Recording
Control Settings
DATE
26(SU)
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
CH
–––
–––
–––
–––
–––
–––
–––
–
–
–
–
–
–
–
á+/–/ENTER/CANCEL/MENU ñ
Prog.3
NOTES:
• The daily/weekly recording can be made continuously until
the recording is canceled or the tape reaches the end.
• During timer recording the automatic rewinding mechanism
does not function.
21
2E50401A[E](18-23)
21
9/1/04, 10:05
Advanced function of VCR section
Stereo recording and playback
Duplicating a video tape
The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.
If you connect the VCR to another VCR or camcorder, you
can duplicate a previously recorded tape.
Make all connections before turning on the power.
When a MTS STEREO broadcast is received, the word “STESTEREO
REO” will appear on the screen
and the program can be viewed
or recorded in stereo.
The Hi-Fi STEREO recording procedure is the same as for
normal recordings.
NOTE:
When using a CABLE system, stereo TV programs may be
transmitted over a mono cable channel. In this case the word
“STEREO” will not appear and the sound will be in mono.
Load a blank cassette tape with the erase prevention tab
intact into the recording VCR.
Load a previously recorded tape into the playback VCR
or CAMCORDER.
Press SPEED to select the desired tape speed SP or SLP.
It is recommended that you set the Speed to the SP mode
on the recording VCR for best results.
Press INPUT SELECT to select
AUDIO/VIDEO input position. “L” will
appear in the display.
Output selection
Press REC/OTR on the recording VCR, then press PAUSE/
STILL.
Press the PLAY button on the playback VCR or
CAMCORDER, then press the PAUSE/STILL button.
Release the recording pause and the playback still simultaneously to begin the duplicating process.
When viewing an MTS STEREO TV program, or playing a
prerecorded VHS Hi-Fi STEREO videotape, press AUDIO
SELECT to select how the audio will be heard through the
speakers. Normally set to the Hi-Fi STEREO position, this
button can be set to the MONO position if the stereo
broadcast or videotape audio is of poor quality. The “R” and
“L” positions allow the audio from the Right or Left Hi-Fi
channel to be heard over both TV speakers. This button has
no effect when viewing a MONO videotape or TV program.
Each time when you press the button, output selection
display appears on the screen for several seconds. Refer to
the chart below.
OUTPUT
SELECTION
SOUND HEARD ON BOTH
SPEAKERS
STEREO
L ch
R ch
MONO
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Connection with second Video recorder
Playback VCR
To VIDEO OUT
To AUDIO (R) OUT
To AUDIO (L) OUT
AUDIO/VIDEO Cord (supplied)
Recording VCR
Second Audio Program (SAP)
Your VCR is fitted with a SAP broadcast system which
enables you to switch to a second audio program when
viewing a selected channel.
This function applies only when the program is broadcast in multi-languages through the SAP broadcast
system.
To VIDEO IN
To AUDIO (R) IN
To AUDIO (L) IN
Connection with Video camera
Playback Camcorder
Press VCR MENU. Then press SET + or – to select
“SAP”.
Then press ENTER to select “ON”.
To AV Jack
Then press VCR MENU until the menu screen is cleared.
Recording VCR
Listening to SAP
When the VCR is turned on or a channel selection is made,
make certain the letters “SAP” appears on the screen. This
means that the “Second Audio Program” broadcasting is
available.
NOTES:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cord not connected),
the sound will be monaural.
To AUDIO (R) IN
To AUDIO (L) IN
To VIDEO IN
AUDIO/VIDEO Cord (not supplied)
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s instructions. A typical camcorder dubbing hookup is shown above.
22
2E50401A[E](18-23)
22
9/1/04, 10:05
Disc playback operation
Disc
Setting setup language
This unit applies to DVD discs from Region 1 or Region ALL.
The loaded Disc (DVD, Audio-CD and MP3-CD) will be recognized automatically.
The suitable Disc-formats are: DVD, CD-R and CD-RW.
Some CD-R/RW discs may be incompatible.
The setup language can be selected.
Press VCR/DVD to select the DVD mode.
(The DVD indicator will
light)
“No Disc” will appear on
the screen (If a DVD
disc has already loaded,
the playback will start
automatically).
Press SETUP in the
stop mode. The SETUP
MENU of DVD will appear on the screen.
Then press
to select
“Other”.
Do not play DVD-ROM, DVD-Audio, CDV, Video-CD, CD-G or
Photo CD to prevent accidental erasure of prerecorded material.
This unit cannot record disc material in DVD, Audio CD etc.
onto a video tape.
If you press the REC/OTR during DVD playback, a symbol mark
" will appear on the screen for approx. 4 seconds.
Title
When two or more movies are recorded on a disc, the disc is
divided into two or more sections. Each section is called a
“TITLE”.
Reading
Language Picture Sound Parental Other
/Enter/Setup/Return
Chapter
The titles can be subdivided into many sections.
Each section is called a “CHAPTER”.
Track
An Audio CD can contain several items.
These are assigned to the tracks.
Press
or ENTER to
select “OSD Language”.
Language Picture Sound Parental Other
OSD Language English
DVD DISC
TITLE 1
CHAPTER 1
CHAPTER 2
TITLE 2
CHAPTER 1
CHAPTER 2
/Enter/Setup/Return
CHAPTER 3
CD
Audio-CD
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 5
or ENTER
Press
or
and then press
to select desired
language (e.g.
English), then press
ENTER.
Language Picture Sound Parental Other
OSD Language English
English
Francais
Espanol
/Enter/Setup/Return
Removing Disc from Case
Be sure to hold the edge of disc. Do
not touch the surface of the disc.
Pick up the disc gently from the
case.
NOTE: To make the SETUP screen disappear, press
SETUP (or RETURN).
If the DVD/VCR does not operate properly: Static electricity, etc., may affect the player's operation. Disconnect the AC
power cord once, then connect it again.
• Do not scratch the disc.
• Do not get dirt on the surface of
the disc.
• Do not stick a label or adhesive
tape on the disc.
• Do not drop or bend the disc.
Storing Disc
• Store the disc in the case to
avoid risk of scratches, dirt or
damage.
• Do not leave disc exposed to direct sunlight or in hot or humid
places.
Cleaning Disc
Wipe the disc with a clean, dry
cloth from center to edge.
• Do not wipe the disc round.
• Do not use liquid or aerosol cleaners.
2E50401A[E](18-23)
23
23
9/1/04, 10:05
Disc playback operation
Playback procedure
Special playback
Press OPEN/CLOSE.
The disc tray will open.
There may be a slight delay between pressing the button
and the function activation.
Place a disc onto the tray.
Hold the disc, position it with the printed label side up, align
it with the guides, and place it in its proper position.
Fast Forward Playback
Press PLAY or OPEN/CLOSE.
The disc tray closes automatically.
On the screen, “ ” changes to “Reading” and then playback will commence.
• To resume normal playback, press PLAY.
• A menu screen may appear on the TV screen, if the
disc has a menu feature. In this case, press
or ENTER to operate a menu feature.
Press F.FWD during normal playback.
Each press of F.FWD will increase the speed of the search
(x2),
(x4),
(x8),
(x20).
Review Playback
Press REW during normal playback.
Each press of REW will increase the speed of the search
(x2),
(x4),
(x8),
(x20).
• To resume normal playback, press PLAY.
Still Playback
Press STOP to end playback.
• The DVD/VCR memorizes the stopped point, depending on the disc. “ ” appears on the screen. Press PLAY
to resume playback (from the scene point).
• If you press STOP again(“ ” appears on the screen)
or unload the disc, the DVD/VCR will clear the stopped
point.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
• If a non-compatible disc is loaded, “Incorrect Disc”, “Region
Code Error” or “Parental Error” will appear on the TV screen
according to the type of loaded disc. In this case, check your
disc again (See pages 23 and 28).
• Some discs may take a minute or so to start playback.
• A “Prohibition” symbol may appear at the upper left of the
screen. This symbol means either the feature you tried is not
available on the disc, or the DVD/VCR can not access the
feature at this time. This does not indicate a problem with
the DVD/VCR.
• When you set a single-faced disc label downwards (ie. the
wrong way up) and press PLAY or OPEN/CLOSE, “Reading”
will appear and remain on the screen for approx. 40 seconds
and then it will change to “Incorrect Disc”.
• Some playback operations of DVDs may be intentionally fixed
by software producers. Since this DVD/VCR plays DVDs according to the disc contents the software producers designed,
some playback features may not be available. Also refer to
the instructions supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise will
be heard from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take
proper precautions when the analog stereo outputs of the
DVD/VCR are connected to an amplification system.
• To resume normal playback, press PLAY.
Frame Advance
Press PAUSE/STILL during still playback.
One frame is advanced each time you press PAUSE/STILL.
• To resume normal playback, press PLAY.
Slow-motion Playback
Press SLOW during normal playback or still playback.
Each press of SLOW will change the speed of the slow x1/2,
x1/4, x1/6, x1/7.
• To resume normal playback, press PLAY.
• To resume the still playback, press PAUSE/STILL.
Locating a chapter or track
Press SKIP (
) Forward or SKIP (
) Reverse during
playback to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.
NOTE:
The unit is capable of holding a still video image or On screen
display image on your television screen indefinitely. If you leave
the still video image or On screen display image displayed on
your TV for an extended period of time, you risk permanent
damage to your television screen. Projection televisions are
very susceptible.
Zooming
This unit will allow you to zoom in on the frame image. You
can then make selections by switching the position of the
frame.
Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
(x 1.3),
2 (x 1.5) and
3 (x 2.0).
Press
or
to view a different part of the frame.
You may move the frame from the center position to UP,
DOWN, LEFT or RIGHT direction.
In the zoom mode press ZOOM repeatedly to return to a
1:1 view (
Off).
NOTE:
You can use the Pause, Slow, Search or Skip feature in the
zoom mode.
24
2E50401A[E](24-27)
Press PAUSE/STILL during normal playback.
24
9/1/04, 10:06
Disc playback operation
Locating desired scene
Changing soundtrack language
Use the title, chapter and time recorded on the disc to
locate the desired point to play back.
You can select the language when you play a multilingual
disc.
To check the title, chapter and time, press DISPLAY. (see
page 30)
Press JUMP during
playback or stop mode.
Jump
Time
Title
Chapter
/Enter/0 9/Cancel/Jump
Press
or
to select
the “Time”, “Title” or
“Chapter”.
Press Number keys to change the number.
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check the
numbers.
Press ENTER.
Playback starts.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
The unit stores the points that you want to watch again up
to 3 points. You can resume playback from each scene.
Marking the scenes
Press MARKER
during playback.
Select the blank Marker
using
/ .
Then press ENTER at the desired scene.
• Repeat this procedure to set the other 2 scenes.
Press MARKER to remove this display.
Marker
Marker
Marker
/Enter/Cancel/Marker
Returning to the scenes
Press MARKER during
playback or stop mode.
Press
to select
the Marker 1-3.
Press ENTER.
Playback starts from the marked scene.
Marker
00 27 54
Marker
01 16 25
02 08 31
Marker
/Enter/Cancel/Marker
To cancel the mark
Press MARKER.
Press
1/8 Eng DolbyDigital
Press AUDIO repeatedly until the desired language is selected.
The on-screen display will disappear after a few seconds.
Subtitles
Marking desired scenes
Press AUDIO during playback.
The current soundtrack language will appear.
to select the Marker 1-3.
Press CANCEL.
To remove this display, press MARKER.
NOTES:
• Some discs may not work with the marking operation.
• The marking is canceled when you open the disc tray or turn
the power off.
• Some subtitles recorded around the marker may fail to appear.
Turning the subtitles on and off
When playing back a disc recorded with subtitles, you can
turn the subtitles on or off.
Press SUBTITLE during playback until “Off”
appears.
Off
Changing the subtitle language
You can select the language when playing back a disc
recorded with multi-lingual subtitles.
Press SUBTITLE repeatedly during playback until your desired language appears.
The on-screen display will disappear after
a few seconds.
1/32 Eng
NOTES:
• If the desired language is not heard after pressing the button
several times, the language is not recorded on the disc.
• Changing soundtrack or subtitle language is cancelled when
you open the disc tray. The initial default language or available language will be heard and seen if the disc is played
back again.
• Depending on the DVD you may be unable to turn on, turn
off, or change the subtitles, even if they are recorded on the
disc. While playing the DVD, the subtitle may change while
opening or closing the disc tray, or while changing the title.
• In some cases, the subtitle language is not changed to the
selected one immediately.
Karaoke playback
When playing back a DVD KARAOKE disc, you can turn
the vocal on or off.
Press AUDIO during DVD KARAOKE disc playback.
Press
or
to select “On” or “Off”.
On: The primary vocal is output when it is recorded
on the disc.
Off: The primary vocal is not output.
NOTES:
• The vocal output feature is used during playback of Dolby Digital (multi-channel) recorded DVD KARAOKE discs. This feature allows you to turn off vocal audio tracks, or restore them for
background accompaniment.
• When playing KARAOKE, connect appropriate audio equipment
such as an amplifier to the DVD/VCR.
25
2E50401A[E](24-27)
25
9/1/04, 10:06
Disc playback operation
Changing angles
In case of CD, at first press
to select “Repeat” and then
press ENTER once or twice to select “Track” or “All”.
When playing back a disc recorded with multi-angle facility,
you can change the angle that you are viewing the scene
from.
Press ANGLE during playback.
The current angle will appear.
Repeat
Chapter
/Enter/Play Mode
Two or more titles are recorded on some discs. If the
title menu is recorded on the disc, you can select the
desired title.
Press TOP MENU during playback.
Title menu appears on the screen.
• Press TOP MENU again to resume playback at the
scene when you pressed TOP MENU.
Press
Press ENTER or PLAY.
The playback of the selected title will start.
or
A-B repeat playback allows you to repeat material between
two selected points.
DVD menu
Press DVD MENU during playback.
The DVD menu appears on the screen.
• Press DVD MENU again to resume playback at the
scene when you pressed DVD MENU.
Press
or
to select the desired item.
Press ENTER. The menu continues to another screen.
Repeat steps 2 and 3 to set the item completely.
NOTE:
Depending on the DVD, you may be unable to select the
title, and a “title menu” may simply be called a “menu” or
“title” in the instructions supplied with the disc.
Repeat playback
Off
Repeat
Off
/Enter/Play Mode
26
2E50401A[E](24-27)
26
Press PLAY MODE in
the stop mode.
Press ENTER repeatedly
until the program table
shown at right appears.
Example: In case you
wish to program in order
of 7, 3, 11:
Enter as 7
,3
, 11.
If you input a wrong
number, press CANCEL.
Play Mode
Press REPEAT A-B
A B
again.
The end point is selected.
Playback starts at the
point that you selected.
Playback stops at the end point, returns to Point A automatically, then starts again.
To resume normal playback press REPEAT A-B again.
“
Off ” appears on the screen.
You can arrange the order of tracks on the disc.
CD
Repeat
Off
/Enter/Play Mode
Program playback (CD)
Press PLAY MODE during playback or stop mode.
DVD
Press REPEAT A-B
during playback.
The start point is selected.
NOTES:
• Some discs may not work with the repeat operation.
• In A-B repeat mode, subtitles near point A or B may not appear.
• During the A-B Repeat Playback the ANGLE feature will not
operate.
• You may not be able to set A-B Repeat, depending on the
scenes of the DVD.
• A-B repeat does not work with an interactive DVD and MP3-CD.
Title, Chapter, Track Playback
Press PLAY MODE again to make the screen disappear.
• Press PLAY to start Repeat playback.
• To resume normal playback, select Repeat “Off”.
A-B Repeat Playback
to select the desired title.
Some DVDs allow you to select the disc contents using
the menu. When you play back these DVDs, you can
select the subtitle language and soundtrack language,
etc. using the DVD menu.
Play Mode
Off
Repeat
All
/Enter/Play Mode
Press ANGLE repeatedly until the desired angle is selected.
Title selection
CD
DVD
1/9
NOTE:
Depending on the DVD, you may not be able to change the
angles even if multi-angles are recorded on the disc.
Press ENTER once or twice to select “Chapter” or “Title”.
Play Mode
Off
Repeat
Off
/Enter/Play Mode
Play Mode
Repeat
17
23
3 11
Clear
: Program
: Off
10
11
12
Program Playback
/Enter/0 9/Cancel/Play Mode
Press
or
Program Playback
to select “Program
Playback” and press
ENTER. “Program Playback” will appear on the screen.
The program you selected will begin to playback in the
order set. To return to normal playback, select “Play
Mode: Off” at step 2 above.
9/1/04, 10:06
Disc playback operation
Random playback (CD)
Press PLAY MODE in
the stop mode.
Press
“Random”.
Press PLAY.
“Random Play” will appear on the screen and Random
Playback will start.
Play Mode
: Random
Repeat
: Off
/Enter/Play Mode
to select
NOTES:
• To cancel program play, select “Clear” at step 4 and press
ENTER.
• The program is cancelled when you open the disc tray or turn
the power off.
• Random playback can not be combined with Repeat playback.
Press OPEN/CLOSE.
The disc tray will open.
Place a disc onto the tray.
Press PLAY or OPEN/CLOSE. The disc tray closes automatically. On the TV-screen, “Reading” will appear. Reading will take as much time as the number of file.
A MP3 menu screen will
appear on the TV screen.
Press
or ENTER to
select folder.
MP3 playback
Pops
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
Press
or
or Number keys to select the desired track, then press ENTER. Track is selected and play
commences.
• In case the folder includes more than 15 tracks, press
or
to display next track list.
-/72 --:--
CD-R
MP3 CD Information
Limitations on MP3 CD playback
Limitations on display
/0-9/Enter/Play Mode
This player can play back the MP3-data which has been
recorded on CD-R or CD-RW. To produce the MP3-data,
you need a Windows-PC with CD-ROM drive and a MP3encoding Software (not supplied).
The Apple-HFS-System can not be played.
• MP3 CD is the disc that is standardized by ISO9660, its file
name must include 3-digits extension letters, “mp3”.
• The directory and file names of the MP3 CD must correspond
to the ISO standardized files.
• This unit can read 200 files per disc. If one directory has
more than 200 files, it reads up to 200 files, the remaining
files will be omitted.
• As for multi-session disc, only the first session can be
played.
• If the CD has both audio tracks and MP3 files, only audio
tracks are played.
• It may take more than one minute for this unit to read MP3
files depending on its structure.
• Music recorded by “Joliet Recording Specification” can be
played back, the file name is displayed (within 16 letters) on
the screen. Long file names will be condensed.
• The music files recorded by “Hierarchical File System” (HFS)
cannot be played.
-/72 --:--
CD-R
Pops
Japan
Bay Bridge
CLOSE MY EYES 10
DIVE TO BLUE 11
12
Honey
13
BLUE EYES
14
Blurry Eyes
flower
Lies and Truthwinter fall
Rain
Strawberry
Welcome party
Thailand
/0-9/Enter/Play Mode
-/72 --:--
CD-R
15
16
Pops
Mother
Hold Your Last
/0-9/Enter/Play Mode
Press STOP to end playback.
• The unit records the stopped point. “ ” appears on the
screen. Press PLAY to resume playback (from the
scene point).
• If you press STOP again or unload the disc, the unit will
clear the stopped point.
Then press OPEN/CLOSE.
The disc tray opens.
Remove the disc and press POWER.
The disc tray closes automatically and DVD/VCR turns off.
NOTES:
• During MP3-Playback, you can not use SEARCH, A-B Repeat functions.
• You can use Repeat (Track or All), Random functions and
Program playback for MP3 CD Playback.
• The maximum number for display is 16 letters. Available
letters for display are the following: capital or small alphabets
of A through Z, numbers of 0 through 9, and _ (under score).
• Other characters than those above are replaced by a
hyphen.
Notes on MP3 files
To play back MP3 CD in the recorded order,
1. Use MP3 software that records data alphabetically or
numerically.
2. Name each file including two-digit or three-digit number (e.g.
“01” “02” or “001” “002”).
3. Refrain from making too many sub-folders.
CAUTION:
• Some MP3 CDs can not be played back depending on the
recording conditions.
• The CD-R/RW that has no music data or non-MP3 files can
not be played back.
2E50401A[E](24-27)
27
27
9/1/04, 10:06
Advanced function of DVD section
Parental control
Some discs are specified not suitable for children. Such
discs can be prevented from play back with the unit.
Language Picture Sound Parental Other
Depending on the DVD disc, the disc may try to
temporarily cancel the rating level that you have set.
It is up to you to decide whether to cancel the rating
level or not.
Password
Parental
Load a DVD disc and press PLAY or OPEN/CLOSE (see
page 24).
If the DVD disc has
Your disc exceeds
been designed to
the parental control level 1.
temporarily cancel the
Rating level, the screen
Parental Control Level
which follows the
Cancel Picture
“Reading” screen will
/Enter/Return
change, depending on
which disc is played. If
you select “YES” with
ENTER key, “Your disc exceeds the parental control level
1.” (e.g.) screen will then appear.
If you wish to cancel the set rating level temporarily,
or
, then
select “Parental Control Level” with
press ENTER. If the 4-digits password at step 3 on left
column has been set, the password entering screen will
appear as shown in step 4 below.
Alternatively, if the password has not been set, playback
will commence. If you don’t know (or have forgotten) the
password, select “Cancel Picture”.
The setting screen will disappear. Press OPEN/CLOSE
to remove the disc.
Enter the password
with Number keys.
Then press ENTER.
Parental control setting
Press SETUP in the stop mode.
Press or to select
“Parental”.
Then press
or ENTER.
Off
0 9/Cancel
/Enter/Setup/Return
Press
once to select “Parental Off”, then press
ENTER until the level you desire appears (e.g.: 1).
Press
once to select “Password
”.
Then press Number keys to input a 4-digit password
(e.g.: 1234).
• If you input a wrong number, press CANCEL.
• Be sure to remember this number!
Level Off
Level 1
Level 8
Temporary disabling of rating level
by DVD disc
: The parental control setting does not
function.
: DVD software for adults cannot be
played back.
: All DVD software can be played back.
Select from level 1 to level 8.
On a scale of 1-8, “1” is the most restrictive.
Press ENTER.
1234
change to
To make SETUP screen disappear, press SETUP.
To unlock the Parental control setting
Cancel the password so as to set the Parental level freely
again,
Select “Password
”
(step 2) and press Number
keys to input your 4-digit
password.
Then press ENTER.
If you interrupt the
entering, press
RETURN.
Language Picture Sound Parental Other
Password
Parental
1234
Please enter the
4 digit password
Enter/0
9/Cancel/Return
Playback will commence if the entered password was
correct.
0 9/Cancel
/Enter/Setup/Return
If the input password was right,
will appear.
You can move to “Parental 1” (e.g.) to input the desired
level or to cancel parental control.
NOTES:
• If each setup (pages 23, 28 ~ 30) has been completed,
the unit can always be worked under the same
conditions (especially with DVD discs).
Each setup will be retained in the memory if you turn
the power off.
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating level
information though its disc jacket says “adult”. For those
discs, the age restriction will not work.
• Do not forget the password. If you forget the password,
contact customer service.
NOTE:
This temporary cancellation of rating level will be kept until
the disc is ejected.
When the disc is ejected, the original rating level will be set
again automatically.
28
2E50401A[E](28-BACK)
28
9/1/04, 10:06
Advanced function of DVD section
Setting the aspect ratio of TV screen
Setting language
You can select the language of the disc menu messages
of DVDs.
You can select the aspect ratio for your TV.
Press SETUP in the stop mode.
Press
or
to select “Language”.
Press SETUP in the stop mode.
Press
or
to select “Picture”.
Press
or ENTER.
Then press
or
to select desired option.
or ENTER, then press
Press
Screen”.
Press
Press
or ENTER.
Press
or
to
select your desired
screen type, then press
ENTER.
Language Picture Sound Parental Other
or ENTER.
Menu
Subtitle
Audio
Press
or
to
select your desired
language, then press
ENTER.
English
Automatic
English
English
Francais
Espanol
Other
/Enter/Setup/Return
Tv Screen
Display
4:3
On
4:3
4:3
16:9
4:3
Letter box
Select this mode when connecting to a conventional TV.
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
Automatic: (Subtitle)
• The unit will automatically select the same language in
the AUDIO setting.
• When the unit selects the same language as the
AUDIO, the subtitles will not appear during playback.
• When you do not use the same language as the
AUDIO, the subtitles will appear during playback.
Language Picture Sound Parental Other
You have the following screen sizes to choose from:
Other:
Other language can be selected (see the “Language
code list” on page 31).
4:3
Pan Scan
It displays the wide picture on the whole screen with left
and right edges automatically cut off.
16:9
Wide
Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
Original: (Audio)
The unit will select the first priority language of each disc.
to select “Tv
/Enter/Setup/Return
English, Francais, Espanol:
The selected language will be heard or seen.
Off: (Subtitle)
Subtitles do not appear.
or
To make SETUP screen disappear, press SETUP.
NOTE:
If the DVD disc is not formatted in the pan & scan style, it
displays 4:3 style.
To make SETUP screen disappear, press SETUP.
NOTE:
If the selected language is not recorded on the disc, the first
priority language is selected.
29
2E50401A[E](28-BACK)
29
9/1/04, 10:06
Advanced function of DVD section
Setting on screen display
Progressive scan
On screen display can be switched on or off when you
press the DISPLAY button.
Press SETUP in the stop mode.
or
to select “Picture”
Press
or ENTER, then
Press
press
or
to select
“Display”.
Tv Screen
Display
Press
or ENTER to
select “On” or “Off”.
On:
Off:
Language Picture
PictureSound
Parental
Language
Parental Other
The unit supports the Progressive scanning system as
well as the conventional interlaced scanning system.
If your TV is equipped with component jacks which
support the progressive video input, you can enjoy high
quality picture by making the Progressive scanning
mode active.
S-VIDEO/COMPONENT
Video selector switch
4:3
Off
/Enter/Setup/Return
On screen displays appears when you press any
buttons (factory setting).
On screen displays do not appear when you press
any buttons except SETUP, SEARCH MODE,
PLAY MODE, MARKER and DISPLAY.
To make SETUP screen disappear, press SETUP.
Status display of disc
Each press of DISPLAY, the status display of the disc will
appear on the screen and change as follows.
Press PROGRESSIVE in the stop mode.
The PROGRESSIVE indicator “
” on the display
window will light.
• The unit recognizes the picture source (film or video) of
the current disc according to the disc information.
Press PLAY to start playback.
• To make the progressive scanning mode inactive, press
PROGRESSIVE in the stop mode.
” on the display
The PROGRESSIVE indicator “
window will go off.
DVD
00:34:56 01:12:33
00:34:56 01:12:33
1/99 Chapter 1/999
1/9
1/8 Eng DolbyDigital
1/32 Eng
Title
To make status display disappear, press DISPLAY again.
AUDIO CD
34:56
71:33
Track 11/99
When you playback the CD disc, the status display will
appear on the screen and continue displaying.
Dynamic Range Control
DRC (Dynamic Range Control) enables you to control
the dynamic range so as to achieve a suitable sound
for your equipment.
Press SETUP in the stop mode.
Press
or
to select “Sound”.
Press
or ENTER to
select “DRC”.
Language Picture Sound Parental Other
DRC
Std
Press
or ENTER,
then press
or
to
select desired setting.
Max
Std
Min
/Enter/Setup/Return
Max: Full dynamic range is increased.
Std: Full dynamic range is maintained.
Min: Dynamic range is reduced.
NOTES:
• This function works only during playback of Dolby Digital
recorded discs.
• The level of Dynamic Range Reduction may differ
depending on DVD video disc.
About PROGRESSIVE SCANNING MODE
To display video on the TV screen, the conventional
scanning method is called “Interlaced scanning.” With this
method, only half of the horizontal lines are displayed at a
time. So two fields complete a single picture (frame); i.e.,
the first field, containing all the odd-numbered lines, is
displayed followed by the second field, containing all the
even-numbered lines.
The Progressive scanning system scans all horizontal
lines at a time, so you can double the number of lines
compared with the interlaced scanning, resulting in a
high-density, flicker-free picture.
To enjoy a progressive scanned video, the TV connected
to the unit must have Progressive inputs.
Depending on the material source format, DVD discs can
be classified into two categories; film and video (note that
some DVD discs contain both a film source and a video
source). Film sources are recorded as 24-frame-persecond information, while (NTSC) video sources are
recorded as 30-frame-per second (60-field-per-second
interlaced) information.
When the unit plays back a film source material,
uninterlaced progressive output signals are created using
the original information. When a video source material is
played back, the unit interleaves lines between the
interlaced lines on each to create the interpolated picture
and outputs as the progressive signal.
NOTES:
• Some discs may not be played back with the progressive scanning mode correctly because of the disc characteristics or recording condition.
• There are some progressive TV and High-Definition TV sets that
are not fully compatible with the unit, resulting in the unnatural
picture when playing back a DVD disc in the Progressive scanning mode. In such a case, use the Interlaced scanning mode.
• You cannot make the progressive scanning mode active in following cases.
– The unit is in the VCR mode.
– The disc is played back in the DVD mode.
– The S-VIDEO/COMPONENT video selector switch is set to
S-VIDEO position.
30
2E50401A[E](28-BACK)
30
9/1/04, 10:06
Language code list
Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see page 29).
Language Name Code
Language Name Code
Language Name Code
Language Name Code
Abkhazian
1112
Fiji
1620
Lingala
2224
Singhalese
2919
Afar
1111
Finnish
1619
Lithuanian
2230
Slovak
2921
Afrikaans
1116
French
1628
Macedonian
2321
Slovenian
2922
Albanian
2927
Frisian
1635
Malagasy
2317
Somali
2925
Amharic
1123
Galician
1722
Malay
2329
Spanish
1529
Arabic
1128
Georgian
2111
Malayalam
2322
Sundanese
2931
Armenian
1835
German
1415
Maltese
2330
Swahili
2933
Assamese
1129
Greek
1522
Maori
2319
Swedish
2932
Aymara
1135
Greenlandic
2122
Marathi
2328
Tagalog
3022
Azerbaijani
1136
Guarani
1724
Moldavian
2325
Tajik
3017
Bashkir
1211
Gujarati
1731
Mongolian
2324
Tamil
3011
Basque
1531
Hausa
1811
Nauru
2411
Tatar
3030
Bengali; Bangla 1224
Hebrew
1933
Nepali
2415
Telugu
3015
Bhutani
1436
Hindi
1819
Norwegian
2425
Thai
3018
Bihari
1218
Hungarian
1831
Oriya
2528
Tibetan
1225
Breton
1228
Icelandic
1929
Panjabi
2611
Tigrinya
3019
Bulgarian
1217
Indonesian
1924
Pashto, Pushto 2629
Tonga
3025
Burmese
2335
Interlingua
1911
Persian
1611
Turkish
3028
Byelorussian
1215
Irish
1711
Polish
2622
Turkmen
3021
Cambodian
2123
Italian
1930
Portuguese
2630
Twi
3033
Catalan
1311
Japanese
2011
Quechua
2731
Ukrainian
3121
Chinese
3618
Javanese
2033
Rhaeto-Romance 2823
Urdu
3128
Corsican
1325
Kannada
2124
Romanian
2825
Uzbek
3136
Croatian
1828
Kashmiri
2129
Russian
2831
Vietnamese
3219
Czech
1329
Kazakh
2121
Samoan
2923
Volapük
3225
Danish
1411
Kirghiz
2135
Sanskrit
2911
Welsh
1335
Dutch
2422
Korean
2125
Scots Gaelic
1714
Wolof
3325
English
1524
Kurdish
2131
Serbian
2928
Xhosa
3418
Esperanto
1525
Laothian
2225
Serbo-Croatian 2918
Yiddish
2019
Estonian
1530
Latin
2211
Shona
2924
Yoruba
3525
Faroese
1625
Latvian, Lettish 2232
Sindhi
2914
Zulu
3631
31
2E50401A[E](28-BACK)
31
9/1/04, 10:06
Problems and troubleshooting
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer or service
outlet if problems persist.
Be sure all connections are properly made when using with other units.
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
DVD/VCR
DVD/VCR does not operate.
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit, then plug it back in.
• Select the DVD or VCR mode before operating.
No picture.
• Antenna connection is not correct or antenna cable is disconnected.
10,11
• The video channel is not in the correct position or the TV is not set to
14
the video channel 3 or 4.
• Check the unit is connected correctly.
10~13
• The video input selector of the TV is not set to VIDEO. Set to VIDEO (or
–
equivalent).
• Channel is set to the external mode.
–
No sound.
• Check the unit is connected correctly.
• Check the input selector of the amplifier is set properly.
• The unit is in the Special playback mode.
The remote control does not function.
• Aim at the remote control at the remote sensor.
• Operate within Approx. 5 Meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
No CABLE reception.
• Check all CABLE connections.
• Station or CABLE system problems, try another station.
11
–
–
–
10~13
–
18,24
VCR
TV recording does not work.
• The erase prevention tab of the video cassette is broken off.
• The unit is in the external input mode.
17,19
Timer recording does not work.
• The time is not set correctly.
• The recording start/end time is not set correctly.
• TIMER REC has not been pressed ( is not lit).
15,16
20
20
18
Noise bars on screen.
• Tracking adjustment beyond range of automatic tracking circuit. Try
Manual tracking adjustment.
• Video heads are dirty.
• The tape is worn or damaged.
Display is not shown in your language.
• Select proper language in the menu options.
23
Playback doesn’t start.
• No disc is inserted.
• The disc may be dirty. Clean up the disc.
• The unit cannot play DVD-ROMs, etc.
24
23
23
Stopping playback, search, slowmotion play, repeat play, or program
play, etc. cannot be performed.
• Some discs may not do some of the functions.
–
33
–
DVD
• The S-VIDEO/COMPONENT selector is not set correctly.
No picture, or the screen is blurred or
• The progressive scanning mode is active through the unit is
divided into two parts.
connected to a TV via the VIDEO OUT jack.
32
2E50401A[E](28-BACK)
32
9/1/04, 10:06
12
30
Problems and troubleshooting / Video head cleaning
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
No 4:3 (16:9) picture.
• The setup does not match your TV.
29
No on-screen display.
• Select Display On.
30
No surround sound.
• The setup does not match your stereo system.
13
The unit or remote operation key is
not functioning.
• Turn off the unit and unplug the AC power cord for several minutes,
then replug it.
–
Playback does not start when the title
is selected.
• Check the Parental setup.
28
Audio soundtrack and/or subtitle
language is not changed when you
play back a DVD.
• Multilingual language is not recorded on the DVD disc.
29
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press SUBTITLE.
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
26
• The function is prohibited with the unit or the disc.
–
appears on the screen.
25,29
Video head cleaning
Video head clogging
The video heads are the means by which the DVD/VCR reads the picture from the tape during playback. In the unlikely event that the heads
become dirty enough to be clogged, no picture will be played back. This
can easily be determined if, during playback of a known good tape,
there is good sound, but no picture (picture is extremely snowy). If this
is the case, have the DVD/VCR checked by qualified service personnel.
NOTES:
Good Picture
Snowy Picture
• DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE REAR COVER.
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
FOR CUSTOMER SERVICE,
ADDITIONAL SET-UP OR
OPERATING ASSISTANCE
PLEASE CALL:
TO ORDER ACCESSORY
PARTS OR LITERATURE
1-800-289-0980
1-888-369-0304
PLEASE CALL:
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT
www.orionsalesinc.com
33
2E50401A[E](28-BACK)
33
9/1/04, 10:06
Specifications
GENERAL
Power supply:
Power consumption:
Weight:
Dimensions:
Inputs/Outputs:
Video:
Audio:
Antenna:
Hi-Fi frequency response:
Hi-Fi dynamic range:
AC 120V 60Hz
Operation: 18W
Stand by: 2W
7.7 lbs (3.5 kg)
Width : 16-15/16 inches (430 mm)
Height : 3-7/8 inches (99 mm)
Depth : 9-3/4 inches (221 mm)
In: 1 Vp-p/75 ohm
Out: 1 Vp-p/75 ohm
In: –8 dBm/50k ohm
Out: –8 dBm/1k ohm
UHF/VHF IN/OUT: 75 ohm coaxial
20Hz to 20,000Hz
More than 90dB
VCR section
Video head:
Audio track:
Tuner:
RF channel output:
F.FWD/REW Time
at 25˚C (77˚F):
4 Rotary Heads
Hi-Fi Sound - 2 Tracks / MONO Sound - 1 Track
181 Channel Freq. Synthesized
VHF
2-13
UHF
14-69
CABLE TV 14-36 (A)-(W)
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
Channel 3 or 4, Switchable
F.FWD Time: Approx. 4 minutes and 50 seconds
REW Time:
Approx. 2 minutes and 30 seconds
(with T-120 Cassette Tape)
DVD section
Signal system:
Applicable disc:
Audio characteristics
frequency response:
S/N Ratio:
Harmonic distortion:
Wow and flutter:
Dynamic range:
Output:
Pickup:
ACCESSORIES:
NTSC
DVD (12cm, 8cm), CD (12cm, 8cm)
DVD: 4Hz - 22kHz
CD: 4Hz - 20kHz
90dB
0.02%
Less than 0.01% Wrms
More than 90 dB
Video : (RCA) 1 Vp-p/75 ohm
Audio : (RCA) –12 dBm/1k ohm
Digital Audio : 0.5Vp-p/75 ohm
CD : Wavelength: 790 nm
Maximum output power: 7 mW
DVD :Wavelength: 655 nm
Maximum output power: 5 mW
Remote control x 1
75 ohm Coaxial Cable x 1
AUDIO/VIDEO Cable x 1
34
2E50401A[E](28-BACK)
34
9/1/04, 10:06
limited
WARRANTY
DVD PLAYER / VIDEO CASSETTE RECORDER COMBINATION UNIT
ORION warrants this product to be free from manufacturing defects in material and workmanship under
normal use and conditions for a period of ninety (90) days from date of original purchase in the United States only.
Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first ninety (90) day period from date of original purchase, ORION will provide carry-in repair
service at an ORION authorized Independent Service Center at no charge. In addition, for a period of up to six
(6) months from date of original purchase for video heads and twelve (12) months from date of original purchase for other component parts, if an original part fails due to a manufacturing defect in material or workmanship we will replace the defective part only (EXCLUDING LABOR AFTER INITIAL NINETY (90) DAY WARRANTY PERIOD) provided the defect or malfunction is verified along with dated proof of purchase.
There are ORION Independent Service Centers located throughout the country. For the one nearest you,
DIAL TOLL FREE: 1-800-289-0980 or visit our website at www.orionsalesinc.com. This product is eligible for
CARRY-IN service only. ORION will not be liable for damages incurred during shipment of the unit. If there are
no ORION authorized Independent Service Centers in your area please call – 1-888-296-7466 for assistance.
Note: This warranty is void if the product is:
(a) Damaged through negligence, misuse, or accident.
(b) Used in a commercial application or rentals.
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect
warranty repairs to the class of product or by the ORION Factory Service Center.
(d) Damaged because it is improperly connected to the equipment of other manufacturers.
This warranty does not cover:
a) Damage to tape cartridge.
b) Cleaning of video heads.
c) Damage to DVD and CD discs.
d) Damage to equipment not properly connected to the product.
e) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or
ORION Factory Service Center.
f) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow
operating instructions provided with the product.
g) Ordinary adjustments to the product, which can be performed by customer as outlined in the owner's
manual.
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL APPLY
TO THIS PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE AND USE.
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH
THE USE OF THIS PRODUCT.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES
YOU SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM
STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE; THEREFORE, THESE RESTRICTIONS MAY NOT APPLY TO YOU.
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
35
2E50401A[E](28-BACK)
35
9/1/04, 10:06
Printed in Thailand
04/09 U
2E50401A[E](28-BACK)
36
9/1/04, 10:06

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2004:09:01 10:08:03Z
Modify Date                     : 2004:09:03 10:15:34+09:00
Page Count                      : 36
Creation Date                   : 2004:09:01 10:08:03Z
Producer                        : Acrobat Distiller 3.0 for Power Macintosh
Mod Date                        : 2004:09:03 10:15:34+09:00
Metadata Date                   : 2004:09:03 10:15:34+09:00

EXIF Metadata provided by EXIF.tools