ORION ELECTRIC M2I3A DVD/VCR TV Interface Device User Manual 2I30101A En cov
ORION ELECTRIC CO., LTD. DVD/VCR TV Interface Device 2I30101A En cov
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 609677 |
| Application ID | 2N/4ndtm9C0Ul5Bbs+kDEg== |
| Document Description | Users Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 190.55kB (2381847 bits) |
| Date Submitted | 2005-12-07 00:00:00 |
| Date Available | 2005-12-07 00:00:00 |
| Creation Date | 2005-12-06 18:27:07 |
| Producing Software | Acrobat Distiller 5.00 for Macintosh |
| Document Lastmod | 2005-12-06 18:27:35 |
| Document Title | 2I30101A-En_cov |
| Document Creator | PageMaker 6.5 |
| Document Author: | soon |
DRAFT
Introduction
Connections
DVD VIDEO PLAYER & VIDEO
CASSETTE RECORDER
SD-V394SU
OWNERâS MANUAL
This device does not tape-record copy protected DVD Video Discs.
2I30101A-En_cov
11/25/05, 16:30
14
Basic setup
(VCR)
22
Playback
(VCR)
29
Recording
(VCR)
34
Other functions
(VCR)
39
Basic playback
(DVD)
42
Advanced
playback
(DVD)
45
Function setup
(DVD)
58
Others
Š2006 Toshiba Corporation
65
Introduction
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol, within an
equilateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the product's
enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain
or moisture.
CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN
FCC NOTICE:
EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN
BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the partly responsible for compliance with the
FCC Rules could void the user's authority to operate this equipment.
CAUTION: THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.
TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS USER'S GUIDE CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION.
USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED.
DO NOT STARE INTO BEAM.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.
2I30101A-En_p02-13
11/25/05, 16:30
IMPORTANT SAFEGUARDS
Introduction
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a soft dry cloth for cleaning the exterior cabinet only.
6. ATTACHMENTS
The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.
7. WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
(symbol provided by RETAC)
8. ACCESSORIES
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.
8A. An appliance and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.
9. VENTILATION
Slots and openings in the cabinet back or bottom are provided for ventilation,
S3125A
to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided and/or the manufacturerâs instructions have been adhered to.
10. POWER SOURCE
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
2I30101A-En_p02-13
11/25/05, 16:30
Introduction
IMPORTANT SAFEGUARDS
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,
as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA LEAD IN WIRE
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC SERVICE
EQUIPMENT
NEC-NATIONAL ELECTRICAL CODE
S2898A
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that
are covered by the operating instructions, as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f . When the unit exhibits a distinct change in performance, this indicates a need for service.
2I30101A-En_p02-13
11/25/05, 16:30
IMPORTANT SAFEGUARDS / Power source
Introduction
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.
21. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
22. DISC TRAY
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.
23. CONNECTING
When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause a product damage. Read the owner's manual of the other
equipment carefully and follow the instructions when making any connections.
24. LASER BEAM
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.
25. DISC
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
26. NOTE TO CABLE TV SYSTEM INSTALLER
This reminder is provided to call the Cable TV system installerâs attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
WARNING
Handling the cord on this product or cords associated with accessories sold with this product, will expose
you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
Power source
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.
Notes:
⢠Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
⢠If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the userâs
responsibility to have an electrician replace the obsolete outlet.
⢠If you cause a static discharge when touching the unit and the
unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
2I30101A-En_p02-13
11/25/05, 16:30
Introduction
Precautions
Notes on handling
When shipping the DVD/VCR, the original shipping
carton and packing materials come in handy. For
maximum protection, repack the unit as it was
originally packed at the factory.
Do not use volatile liquids, such as insect spray, near
the DVD/VCR. Do not leave rubber or plastic
products to contact the DVD/VCR for a prolonged
period. They will leave marks on the finish.
The top and rear panels of the DVD/VCR may
become warm after a long period of use. This is not a
malfunction.
When the DVD/VCR is not in use, be sure to remove
the disc and the video cassette turn off the power.
If you do not use the DVD/VCR for a long period, the
unit may not function properly in the future. Turn on
and use the DVD/VCR occasionally.
Notes on locating
Place the DVD/VCR on a level surface. Do not use it
on a shaky or unstable surface such as a wobbling
table or inclined stand. The loaded disc or the video
tape may become dis-aligned and damage the DVD/
VCR.
When you place this DVD/VCR near a TV, radio, or
VCR, the playback picture may become poor and the
sound may be distorted. In this case, place the DVD/
VCR away from the TV, radio or VCR.
Note on moisture condensation
Moisture condensation damages the DVD/VCR.
Please read the following carefully.
Moisture condensation occurs, for example, when you
pour a cold drink into a glass on a warm day. Drops of
water form on the outside of the glass. In the same way,
moisture may condense on the head drum or the optical
pick-up lens inside this unit, one of the most crucial
internal parts of the DVD/VCR.
le of mo
Examp ensat isture
ion!
cond
Tape
Head drum
Moisture condensation occurs during the
following cases.
When you bring the DVD/VCR directly from a cold
place to a warm place.
When you use the DVD/VCR in a room where you
just turned on the heater, or a place where the cold
wind from the air conditioner directly hits the unit.
In summer, when you use the DVD/VCR in a hot and
humid place just after you move the unit from an air
conditioned room.
When you use the DVD/VCR in a humid place.
Itâs too
warm!
Notes on cleaning
Use a soft, dry cloth for cleaning.
Use a dry cloth to wipe.
Do not use any type of solvent, such as thinner and
benzine, as they may damage the surface of the
DVD/VCR.
If you use a chemical saturated cloth to clean the unit,
follow that productâs instructions.
Do not use the DVD/VCR when moisture
condensation may occur.
If you use the DVD/VCR in such a situation, it may
damage discs and internal parts. Remove the disc or
the video tape, connect the power cord of the DVD/
VCR to the wall outlet, turn on the DVD/VCR, and
leave it for two or three hours. After two or three
hours, the DVD/VCR will have warmed up and
evaporated any moisture. Keep the DVD/VCR
connected to the wall outlet and moisture
condensation will seldom occur.
Wa
it!
2I30101A-En_p02-13
11/25/05, 16:30
Wall outlet
Notes on discs
Structure of disc contents
Do not touch the playback side of the disc.
Normally, DVD video discs are divided into titles, and the
titles are sub-divided into chapters. VIDEO CDs and
audio CDs are divided into tracks.
Introduction
On handling discs
DVD video disc
DVD video disc
Title 1
Chapter 1
Title 2
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Playback side
Do not attach paper or tape to discs.
Video CD/Audio CD
Video CD/Audio CD
Track 1
Track 2
Track 3
Track 4
Track 5
On cleaning discs
Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.
Each title, chapter or track is assigned a number, which
is called âtitle numberâ, âchapter numberâ or âtrack
numberâ respectively.
There may be discs that do not have these numbers.
Notes on copyright
Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.
On storing discs
Do not store discs in a place subject to direct sunlight
or near heat sources.
Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.
The unauthorized recording, use, distribution, or revision
of television programs, videotapes, DVDs and other
materials, is prohibited under the Copyright Laws of the
United States and other countries, and may subject you
to civil and/or criminal liability.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
Consumers should note that not all high definition
television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In
case of 525 progressive scan picture problems, it is
recommended that the user switch the connection to the
âSTANDARD DEFINITIONâ output. If there are questions
regarding our TV set compatibility with this model 525p
DVD player, please contact our customer service center.
2I30101A-En_p02-13
11/25/05, 16:30
Introduction
Notes on discs (continued)
About this ownerâs manual
This ownerâs manual explains the basic instructions of
this DVD/VCR. Some DVD video discs are produced in
a manner that allows specific or limited operation during
playback. As such, the DVD/VCR may not respond to all
operating commands. This is not a defect in the DVD/
VCR. Refer to instruction notes of discs.
The following symbol may appear on the TV screen
during operation.
It means that the operation is not permitted by the DVD/
VCR or the disc.
For example, sometimes it is unable to stop the
playback of copyright message of the disc when the
STOP ( ) button is pressed. Alternatively, this symbol
may also indicate that the feature is not available for the
disc.
Notes on region numbers
The region number of this DVD/VCR is 1. If region
numbers, which stand for their playable area, are printed
on your DVD video disc and you do not find 1 or ALL ,
disc playback will not be allowed by the player. (In this
case, the DVD/VCR will display a message on-screen.)
Playable discs
This DVD/VCR can play the following discs.
Disc Mark
Contents
⢠Video CD not equipped with PBC function
(Version 1.1)
Sound and movie can be played on this DVD/VCR in
the same way as an audio CD.
⢠Video CD equipped with PBC function
(Version 2.0)
In addition to operation of a Video CD not equipped
with the PBC function, you can enjoy playback of
interactive software with search function by using the
menu displayed on the TV screen (Menu Playback).
Some of the functions described in this ownerâs
manual may not work with some discs.
12 cm
Audio
Video
(moving
pictures)
DVD
video
discs
Approx. 8 hours
(double sided disc)
Approx. 80 minutes
(single sided disc)
8 cm
Approx. 160 minutes
(double sided disc)
Video
CDs
DIGITAL VIDEO
Audio
CDs
Audio
Video
(moving
pictures)
12 cm
Approx. 74 minutes
8 cm
Approx. 20 minutes
12 cm
Approx. 74 minutes
8 cm
(CD
single)
Approx. 20 minutes
Audio
The following discs are also available.
DVD-R/RW discs of DVD video format
CD-R/CD-RW discs of CD-DA, Video CD, SVCD,
MP3, WMA, JPEG or DivXÂŽ format
Kodak Picture CD and FUJICOLOR CD format
Some of these discs may be incompatible.
⢠You cannot play discs other than those listed above.
⢠You cannot play discs of DVD-RAM, DVD-ROM, Photo
CD, etc., or non standardized discs even if they may
be labeled as above.
⢠Some CD-R/RWs cannot be played back depending
on the recording conditions.
⢠This DVD/VCR uses the NTSC color system, and
cannot play DVD video discs recorded in any other
color system (PAL, SECAM, etc.).
Because of problems and errors that can occur
during the creation of DVD and Video CD software
and/or the manufacture of DVD and Video CD discs,
Toshiba cannot guarantee that this DVD/VCR will
play every feature of every DVD bearing the DVD
logo and/or every Video CD bearing the CD logo.
As one of the creators of DVD technology, Toshiba
DVD players are manufactured using the highest
standards of quality, and as a result, such
incompatibilities are rare. If you happen to experience
any difficulty playing a DVD or a Video CD on a this
DVD/VCR, please feel free to call our Contact listed
in âHow to Obtain Warranty Servicesâ 69 .
2I30101A-En_p02-13
Maximum
playback time
Approx. 4 hours
(single sided disc)
On Video CDs
This DVD/VCR supports Video CDs equipped with the
PBC (Version 2.0) function. (PBC is the abbreviation of
Playback Control.) You can enjoy two playback
variations depending on types of discs.
Disc
Size
11/25/05, 16:30
Contents
Basic playback (DVD)
SAFETY PRECAUTIONS ................................ 2
IMPORTANT SAFEGUARDS .......................... 3
Power source ................................................... 5
Precautions ...................................................... 6
Notes on discs .................................................. 7
Contents. .......................................................... 9
Identification of controls ................................. 10
Playing a disc ................................................. 42
Connections
Antenna connections ...................................... 14
Cable TV connections .................................... 16
Connecting to a TV ........................................ 18
Connecting to optional audio equipment ........ 20
Basic setup (VCR)
Setting the video channel ............................... 22
Setting the language ...................................... 23
Clock setting ................................................... 24
Tuner setting .................................................. 27
Advanced playback (DVD)
Zooming ......................................................... 45
Locating desired scene .................................. 45
Marking desired scenes ................................. 46
Repeat playback............................................. 47
A-B Repeat playback...................................... 47
Program playback .......................................... 48
Random playback........................................... 48
Changing angles ............................................ 49
Title selection ................................................. 49
DVD menu ...................................................... 49
Changing soundtrack language ..................... 50
Setting surround sound .................................. 50
Subtitles ......................................................... 51
To turn off the PBC ......................................... 51
MP3/WMA/JPEG/DivXÂŽ and Audio CD
operation ........................................................ 52
Repeat and program playback
using the file browser ..................................... 56
Introduction
Introduction
Function setup (DVD)
Playback (VCR)
Loading and unloading a cassette tape ......... 29
Cassette tape playback .................................. 30
Special playback ............................................ 31
Convenience function ..................................... 32
Customizing the finction settings .................... 58
Temporary disabling of rating level by
DVD disc ........................................................ 64
Others
Recording (VCR)
Recording a TV program ................................ 34
One-touch Timer Recording (OTR) ................ 36
Timer recording .............................................. 37
Language code list ......................................... 65
Troubleshooting .............................................. 66
Specifications ................................................. 67
Limited warranty ............................................. 68
Other functions (VCR)
Stereo recording and playback ...................... 39
Second Audio Program (SAP) ........................ 39
Duplicating a video tape ................................. 40
Recording a DVD/CD disc .............................. 41
2I30101A-En_p02-13
11/25/05, 16:30
Introduction
Identification of controls
See the page in
for details.
Front panel
VCR/DVD mode selector
button 22
OPEN/CLOSE button 42
REC button 34
ON/STANDBY button 22
Cassette loading slot 29
EJECT
button 29
DVD mode indicator 42
FWD button 30
Disc tray 42
Remote sensor 13
VCR mode indicator 22
CHANNEL
PLAY button 30
buttons 34
Display window 11
AUDIO (L/R)/VIDEO IN
(LINE IN 2) jacks 40
REV button 30
STOP button 30
Rear panel
DVD COAXIAL DIGITAL AUDIO OUT jack 20
DVD S-VIDEO OUT jack 19
AC power cord
DVD/VCR common AUDIO
(L/R)/VIDEO OUT jacks 18
DVD COMPONENT DVD AUDIO (L/R)
OUT jacks 19
OUT jacks 19
AUDIO (L/R)/VIDEO
IN (LINE IN1) jacks 40
10
2I30101A-En_p02-13
ANT IN jack 14
10
11/25/05, 16:30
ANT OUT jack 14
Display window
Play indicator
Still indicator
DVD disc inserted indicator
Recording
indicator
(VCR)
Introduction
VCR indicator (VCR)
CD inserted
indicator
Multifunctional indicator
Track indicator (CD)
Tape loaded indicator (VCR)
Progressive indicator
AM/PM indicator
(AM is not displayed)
Timer Recording indicator (VCR)
VCR operation status
Press CALL to display VCR operation status on the screen.
To cancel the display, press CALL again.
While watching TV
HI-FI STEREO
DAY OF THE WEEK
Recording :
CLOCK
STEREO AND
SECOND
AUDIO
PROGRAM
(SAP)
VCR Icons
While operating a tape
8 : 47AM MON
STEREO SAP
CH 125
CHANNEL
OPERATING
MODE
8 : 30AM MON
HI-FI
Rec/Pause :
Play :
AUTO REPEAT
00 : 00 : 00 SP
TAPE SPEED
REAL TIME COUNTER
STEREO
00 : 15 : 12 SP
TAPE IN
Stop :
Eject :
OUTPUT SELECTION
Disc operation status
Press DISPLAY, the status display of the disc will appear on the screen as follows.
DVD
VCD
DISC OPERATION
TITLE NO.
ELAPSED
TIME
TOTAL
TIME
DVD
00:15:25 01:41:39
Title 1/3
Chapter 2/24
1/1 Eng Dolby Digital
1/2 Eng
1/1
ANGLE NO.
DISC OPERATION
CHAPTER
NO.
ELAPSED TOTAL
TIME
TIME
VCD
Track 3/15
00:08:32 00:51:03
SUBTITLE LANGUAGE
TRACK NO.
AUDIO LANGUAGE
A KIND OF AUDIO
11
2I30101A-En_p02-13
11
11/25/05, 16:30
Introduction
Identification of Controls (Continued)
The instructions in this manual describe the functions on the remote control. See the page in
for details.
Remote control
VCR DVD button 22
EJECT button (VCR) 29
CLOCK/COUNTER button 33
VCR MENU button 23
SETUP button 56
CM SKIP button 31
ZOOM button 45
POWER button 22
OPEN/CLOSE button (DVD) 42
TV/VCR button 22
INPUT SELECT button 40
SLOW button 31
44
DVD MENU button 49
TOP MENU button 49
Direction buttons (
/ / / ) 45
SET+/â buttons 23
ENTER button 23 58
CH+/â buttons 34
CANCEL button 26
CLEAR button 45
RETURN button 56
STOP button 30 42
PAUSE/STEP button 31 43
INDEXâ button 33
SKIP
button 44
REV button 30 44
REC/OTR button 34 36
TIMER REC button 37
Direct channel
selection buttons (0â9) 28
Number buttons (0â9) 45
COUNTER RESET button 32
ANGLE button 49
ATR button 31
PLAY button 30 42
INDEX+ button 33
button 44
SKIP
FWD button 30
A-B RPT button 47
SP/SLP button 34
PLAY MODE button 47
CALL button 11
DISPLAY button 11
ZERO RETURN button 32
JUMP button 45
MARKER button 46
AUDIO SELECT button 39
AUDIO button 50
SUBTITLE button 51
DVD MENU button
Use the DVD MENU button to display the menu
included on many DVD video discs. To operate a menu,
follow the instructions in âDVD Menu.â 49
12
2I30101A-En_p02-13
12
44
11/25/05, 16:30
Introduction
Inserting batteries
Open the battery compartment cover in the direction of
the arrow.
Install two âAAAâ batteries
(supplied), paying attention to the
polarity diagram in the battery
compartment.
Replace the compartment
cover.
Caution:
Never throw batteries into a fire.
Notes:
⢠Be sure to use AAA size batteries.
⢠Dispose of batteries in a designated disposal area.
⢠Batteries should always be disposed of with the environment in mind. Always dispose of batteries in accordance with
applicable laws and regulations.
⢠If the remote control does not operate correctly, or if the operating range becomes reduced, replace batteries with
new ones.
⢠When necessary to replace batteries in the remote control, always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.
⢠Always remove batteries from remote control if they are dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from leaking into the battery compartment.
Remote control basics
⢠Press POWER to turn the DVD/VCR on or off.
⢠Select your desired operating mode (DVD or VCR) using VCR DVD.
(DVD or VCR indicator on the front panel will show you which mode is selected.)
⢠Press CH + or CH â to move through the channels one channel at a time.
⢠The / / / are also used to navigate on-screen menu system.
⢠You can directly access specific channels using Direct channel selection buttons (0â9).
⢠Each press of VCR DVD on the remote control, switches the screen between the VCR screen (VCR mode) and the
DVD screen (DVD mode).
Operation
⢠Aim the remote control at the remote sensor and press control buttons to
operate.
⢠Operate the remote control within 30° angle on either side of the remote
sensor, up to a distance of approx. 7 meters.
Approx. 7 meters
13
2I30101A-En_p02-13
13
11/25/05, 16:30
Connections
Antenna connections
If you are using an antenna system, follow these instructions. If you are a Cable TV subscriber, skip ahead to page 16 for
the proper connections.
Antenna to DVD/VCR connection
The DVD/VCR must be connected âbetweenâ the antenna and the TV. First, disconnect the antenna from the TV and
connect it to the DVD/VCR. Then connect the DVD/VCR to the TV. Below are 3 common methods of connecting an antenna
system to a DVD/VCR. Find the type of antenna system you are using and follow the connection diagram.
Combination VHF/UHF Antenna with 75 ohm Coaxial Cable
DVD/VCR
75 ohm Coaxial Cable
Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire
DVD/VCR
Matching Transformer 300 ohm Input 75
ohm output (not supplied)
300 ohm Twin Lead (Flat) Wire
(not supplied)
DVD/VCR
Separate VHF and UHF Antennas
UHF
VHF
Combiner 75/300 ohm Inputs 75 ohm output
(not supplied)
300 ohm Twin Lead (Flat) Wire
(not supplied)
75 ohm Coaxial Cable
Note:
If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and
one 75 ohm output.
Notes: ⢠A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to
the DVD/VCR properly.
⢠For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type
antenna is required.
⢠If you are not sure about the connection, please refer to qualified service personnel.
14
2I30101A-En_p14-17
14
11/25/05, 16:31
DVD/VCR to TV connection
After you have connected the antenna to the DVD/VCR, you must connect the DVD/VCR to the TV.
Below are 3 common methods of connecting your DVD/VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This DVD/VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the DVD/VCR to the TV for VHF and UHF reception.
Connections
TV
Note:
VHF/UHF IN
If a VHF or UHF antenna is used,
set the TV/CABLE menu option to
the âTVâ mode.
75 ohm Coaxial Cable (supplied)
TV with single 75 ohm VHF/UHF antenna
input
TV
Note:
75 ohm Coaxial Cable
(supplied)
Splitter 75 ohm Input
75/300 ohm outputs
(not supplied)
UHF
If a VHF or UHF antenna is used,
set the TV/CABLE menu option
to the âTVâ mode.
VHF
TV with 300 ohm UHF and 75 ohm VHF
antenna inputs
TV
UHF
75 ohm Coaxial Cable
(supplied)
Splitter 75 ohm Input
300 ohm outputs
(not supplied)
Note:
If a VHF or UHF antenna is used,
set the TV/CABLE menu option to
the âTVâ mode.
VHF
TV with 300 ohm UHF and 300 ohm VHF
antenna inputs
15
2I30101A-En_p14-17
15
11/25/05, 16:31
Connections
Cable TV connections
Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This
DVD/VCR has an extended tuning range and can be tuned to most cable channels without using a cable company
supplied converter box, except for those premium channels which are intentionally scrambled. If you subscribe to a
premium channel which is scrambled, you must have a descrambler box for proper reception.
DVD/VCR
TV
VHF/UHF
IN (ANT)
Incoming Cable
Allows: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
DVD/VCR
TV
Converter/
Descrambler
VHF/UHF
IN (ANT)
Incoming
Cable
Allows: * Recording of channels through the converter box
(scrambled and unscrambled).
* Using the programmable timer to record only the
channel selected at the converter box.
Note:
To record from converter/descrambler, DVD/
VCR tuner must be tuned to the converter
output channel, usually channel 3 or 4.
Prevents: * Recording one channel while watching another.
* Using the DVD/VCR tuner to select channels.
DVD/VCR
TV
Converter/Descrambler
VHF/UHF
IN (ANT)
Incoming Cable
Allows: * Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording an unscrambled channel while watching
any channel selected at the converter box.
Prevents:
Recording scrambled channels.
Note:
If you are playing a tape or using the tuner
built into the DVD/VCR, the converter must
be set to the video channel output of the DVD/
VCR (either 3 or 4).
Note: Whenever a Converter/Descrambler box is placed before the DVD/VCR, you must tune the DVD/VCR to the output of
the Converter/Descrambler box, usually channel 3 or 4.
16
2I30101A-En_p14-17
16
11/25/05, 16:31
IMPORTANT: Make sure the TV/CABLE menu option is set to the âCABLEâ mode.
This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable company for more information concerning connection to their descrambler equipment. There are
many ways to connect your DVD/VCR to a cable system. Below are six common methods of connection.
TV
Splitter
A/B Switch
VHF/UHF
IN (ANT)
Incoming Cable
Connections
DVD/VCR
Converter/Descrambler
Allows: *
Prevents: *
Recording of one channel while watching another.
Using the programmable timer to record only the channel selected at the converter box.
Recording of all channels through the converter box.
Watching scrambled channels while recording another channel.
Using
the DVD/VCR tuner to select channels.
DVD/VCR
TV
Splitter
Converter/Descrambler
Incoming Cable
A/B Switch
VHF/UHF
IN (ANT)
Allows: *
Prevents:
Recording of nonscrambled channels.
Recording of one channel while watching another.
Watching premium channels through the converter while recording nonscrambled channels.
Using the programmable timer.
Recording scrambled channels.
DVD/VCR
TV
Splitter
Converter/Descrambler
VHF/UHF
IN (ANT)
Converter/Descrambler
Incoming Cable
A/B Switch
Allows: * Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching another (scrambled or
unscrambled) channel.
* Using the programmable timer to record only the channel selected at the converter box.
Prevents: Using the DVD/VCR tuner to select channels.
17
2I30101A-En_p14-17
17
11/25/05, 16:31
Connections
Connecting to a TV
Connect the DVD/VCR to your TV.
Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you
also connect the S-video or ColorStreamÂŽ component video outputs to your TV/monitor. 19
Basic connection
Signal flow
(yellow) (red)
To wall outlet
To VIDEO
OUT
(white)
To ANALOG AUDIO OUT
Audio/video cable (supplied)
To audio inputs
To video input
(yellow)
(red)
(white)
TV or monitor with
audio/video inputs
Notes:
⢠Refer to the ownerâs manual of the connected TV as well.
⢠When you connect the DVD/VCR to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
⢠If your television set has one audio input, connect the left and right audio outputs of the DVD/VCR to a Y cable adapter (not
supplied) and then connect to your TV.
⢠Connect the DVD/VCR directly to your TV. If you connect the DVD/VCR to a VCR, TV/VCR combination or video selector,
the playback picture may be distorted as DVD video discs are copy protected.
18
2I30101A-En_p18-25
18
11/25/05, 16:31
S-video output
An S-Video connection is superior to Video (Yellow) output. Use this method for DVD playback when the connected television has SVideo input, and does not have component video inputs.
Component video outputs
Connecting to an audio system and TV equipped with S-video input/component video inputs
Connections
PROGRESSIVE outputs
Some TVs or monitors are equipped with component video inputs that are capable of reproducing a progressively scanned video
signal. Connecting to these inputs allows you to view the highest quality pictures with less flicker.
INTERLACED outputs
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy the highest quality
DVD picture playback.
Notes:
⢠To switch the scan mode between the interlace and progressive modes, see page 63 .
⢠In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
The S-video output and component video output transports the DVD-video signal exclusively and will deliver enhanced DVD
video picture performance.
Signal flow
To ANALOG
AUDIO OUT
(white)
To S-VIDEO
OUT
(red)
If you connect the DVD/VCR to
your TV with the DVD OUT jacks,
select the corresponding video
input on your television to watch
DVD video discs.
To wall outlet
⢠Actual labels for
component video
inputs may vary
depending on the
TV manufacturer
(ex. Y, R-Y, B-Y or
Y, CB, CR).
To PR/CR
VIDEO
OUT
To PB/CB
VIDEO
OUT
To Y
VIDEO
OUT
Audio cable (not supplied)
To Y video input
Component
video cable
(not supplied)
S-video cable (not supplied)
To audio inputs of
the amplifier
(red)
(white)
To PB/CB video input
To PR/CR video input
To S-video input
TV or monitor with
component video inputs
Audio system
Notes:
⢠Refer to the ownerâs manual of the connected equipment as well.
⢠When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
⢠If you place the DVD/VCR near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the DVD/
VCR away from the tuner and radio.
⢠The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiverâs volume to a moderate
listening level. Otherwise, the speakers may be damaged by a sudden high volume sound.
⢠Turn off the amplifier before you connect or disconnect the DVD/VCRâs power cord. If you leave the amplifier power on, the
speakers may be damaged.
19
2I30101A-En_p18-25
19
11/25/05, 16:31
Connections
Connecting to optional audio equipment
You can enjoy high quality dynamic sounds of DVD video discs or
audio CDs by connecting the DVD/VCR to optional audio
equipment.
Connection for video signal to your TV, see
18 19
⢠This selection uses the following reference mark.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the
home. You can enjoy motion picture and live concert DVD video discs encoded via the Dolby Digital recording system with this dynamic realistic
sound by connecting the DVD/VCR to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby Pro
Logic Surround decoder, you will obtain the full benefit of Pro Logic from the same DVD movies that provide full 5.1-channel Dolby Digital soundtracks,
as well as from titles with the Dolby Surround mark.
Manufactured under license from
Dolby Laboratories. âDolbyâ âPro
Logicâ and the double-D symbol
are trademarks of Dolby
Amplifier equipped with a
Laboratories.
Dolby Digital decoder
⢠Use DVD video discs encoded
via the Dolby Digital recording
system.
To COAXIAL
type digital
audio input
75 ⌠coaxial cable (not supplied)
To COAXIAL DIGITAL
AUDIO OUT
Connecting to an amplifier equipped with Dolby Surround Pro Logic
Dolby Surround Pro Logic
You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers).
With an amplifier equipped with Dolby Digital
Connect the equipment the same way as described in âConnecting to an amplifier equipped with a Dolby Digital decoder.â Refer to
that amplifierâs ownerâs manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound.
With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
⢠This connection is only suitable for Video CDs and Audio CDs.
* Connect one or two rear speakers.
The output sound from the rear
speakers will be monaural even if you
connect two rear speakers.
Amplifier equipped with
Dolby Surround Pro Logic
To audio input
Audio cable (not supplied)
To ANALOG
AUDIO OUT
Connecting to an amplifier equipped with a DTS decoder
Digital Theater Systems (DTS)
DTS is a high quality surround technology used in theaters and now available for home use, on DVD video discs or audio CDs.
If you have a DTS decoder or processor, you can obtain the full benefit of 5.1 channel DTS encoded sound tracks on DVD video discs
or audio CDs.
Amplifier equipped with a
DTS decoder
To COAXIAL
type digital
audio input
75 ⌠coaxial cable (not supplied)
âDTSâ and âDTS Digital Outâ are
trademarks of Digital Theater
Systems, Inc.
⢠Use DVD video discs or
audio CDs encoded via the
DTS recording system.
To COAXIAL DIGITAL
AUDIO OUT
20
2I30101A-En_p18-25
20
11/25/05, 16:31
Warning
When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks. To avoid
possible damage to the audio system, you should take proper precautions when the ANALOG AUDIO OUT (L/R) jacks of the
DVD/VCR are connected to an amplification system. (Do not leave the ANALOG AUDIO OUT (L/R) wires dangling.) To enjoy
DTS Digital Surround⢠playback, an external 5.1 channel DTS Digital Surround⢠decoder system must be connected to the
COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR.
Connecting to an amplifier equipped with an MPEG2 audio decoder
Connections
MPEG2 sound
You can enjoy motion picture and live concert DVD video discs encorded via the MPEG2 recording system with dynamic realistic
sound by connecting an amplifier equipped with an MPEG2 audio decoder or MPEG2 audio processor.
Amplifier equipped with an
MPEG2 audio decoder
To COAXIAL
type digital
audio input
⢠Use DVD video discs
encoded via the MPEG2
recording system.
To COAXIAL DIGITAL
AUDIO OUT
75 ⌠coaxial cable (not supplied)
Connecting to an amplifier equipped with a digital audio input
2 channel digital stereo
You can enjoy the dynamic sound of 2 channel digital stereo by connecting an amplifier equipped with a digital audio input and speaker
system (right and left front speakers).
Amplifier equipped with a
digital audio input
To COAXIAL
type digital
audio input
To COAXIAL DIGITAL
AUDIO OUT
75 ⌠coaxial cable (not supplied)
Notes:
⢠DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR to the AC-3 RF input of a Dolby Digital Receiver.
This input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO
OUT jack of the DVD/VCR.
⢠Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD/VCR to the âCOAXIALâ input of a Receiver or Processor.
⢠Refer to the ownerâs manual of the connected equipment as well.
⢠When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the
wall outlet before making any connections.
⢠The output sound of the DVD/VCR has a wide dynamic range. Be sure to adjust the receiverâs volume to a moderate
listening level. Otherwise, the speakers and your hearing may be damaged by a sudden high volume sound.
⢠Turn off the amplifier before you connect or disconnect the DVD/VCRâs power cord. If you leave the amplifier power on, the
speakers may be damaged.
21
2I30101A-En_p18-25
21
11/25/05, 16:31
Basic setup (VCR)
POWER
VCR DVD
TV/VCR
Setting the video channel
When a TV is connected with the 75 ohm coaxial cable only.
To view playback of a recorded tape or DVD disc, or to watch a
program selected by the VCR's channel selector, the TV must be set to
channel 3 or 4 (video channel).
Setting the video channel
Press and hold 3 or 4 on the remote for 3
seconds in standby mode.
The video channel will
start to flash for 3
seconds in the display
window.
OR
Press POWER to turn on the DVD/VCR.
Press VCR DVD selector to select the VCR mode.
Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 1.
Press TV/VCR to select the VCR position.
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for
about 4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot
be tuned on your TV, proceed as follows: set the VCR
3/4 channel selector and the TV to CH 3 or 4, play
back a prerecorded tape and tune the TV to receive a
sharp color picture from the video cassette recorder.
Refer to your TV owner's manual for details.
Note:
If the unit does not operate properly, or No key operation
(by the unit and/or the remote control): Static electricity, etc.,
may affect the player's operation. Disconnect the AC power cord
once, then connect it again.
The VCR mode indicator
will light at the right of the
display window.
The VCR indicator will
appear at the upper left of
the display window.
22
2I30101A-En_p18-25
22
11/25/05, 16:31
Setting the language
VCR DVD
VCR MENU
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
ENTER
SET +/â
Setting the language
⢠Turn ON the TV and select to the corresponding
video input.
⢠Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Press VCR MENU until the MENU screen is
cleared.
Basic setup (VCR)
Preparation:
Press VCR MENU.
The VCR menu screen will appear.
Press SET + or â to select âSYSTEM
SETUPâ, then press ENTER.
If you use the unit for the first time and
press VCR MENU, instead of the
main menu screen the âSYSTEM
SETUPâ menu screen in step 2 may
appear.
Notes:
⢠Both the VCR and the DVD have their own player menus $ .
⢠If no buttons are pressed for more than 60 seconds, the VCR
MENU screen will return to normal TV-operation automatically.
âŞ
âŠ
Press SET + or â to select âLANGUAGEâ, then
press ENTER.
⊠âŞ
Press SET + or â to select the desired language:
English (ENGLISH), Spanish (ESPAĂOL) or
French (FRANCAIS), then press ENTER.
⊠âŞ
23
2I30101A-En_p18-25
23
11/25/05, 16:31
Basic setup (VCR)
POWER
VCR DVD
Clock setting
VCR MENU
The AUTO CLOCK function will automatically set the built-in clock
(Month, Day, Year and Time) when the DVD/VCR is connected to an
Antenna or Cable system and it is turned off. The DVD/VCR searches
for a station in your area containing the necessary AUTO CLOCK setting
signals. Once received, it will take approximately 4 minutes for the clock
to set itself automatically.
ENTER
SET +/â
CALL
AUTO CLOCK setting
To set AUTO CLOCK to off
When shipped from factory the AUTO CLOCK is set to âONâ.
But if you do not want AUTO CLOCK setting, it can be turned off:
Preparation:
⢠Turn ON the TV and select the corresponding video input.
⢠Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Connect the Antenna or Cable system.
Wait at least three minutes and press POWER.
Press VCR MENU.
⢠If you use a cable box, turn it on.
Plug the AC power cord to the AC outlet.
Make sure the DVD/VCR is turned off.
⢠If you press POWER, the Auto Clock
set is not programmed.
Press CALL to check the clock setting on
the on screen display.
8 : 47AM MON
STEREO SAP
Press SET + or â to select âSYSTEM SETUPâ,
then press ENTER.
Press SET + or â to select âAUTO CLOCKâ.
CH 125
00 : 00 : 00 SP
If the clock is not set, check the antenna
condition. The AUTO CLOCK may not
function properly if the reception condition
is not good.
Press ENTER to select âOFFâ.
AUTO CLOCK adjustment
The auto clock adjustment will be updated at 6:00
AM, 12:00 PM and 6:00 PM everyday when the
DVD/VCR turned off.
⢠If you use a cable box and you want AUTO CLOCK
adjustment to be performed, the cable box must be
left on.
⢠The AUTO CLOCK adjustment is not effective when
there is a difference of more than 5 minutes exists
between the built-in clock time and the actual time.
Press VCR MENU repeatedly to return to the
normal screen.
⢠When the AUTO CLOCK is set to
âOFFâ, the AUTO CLOCK adjustment does not function. You must set
the clock manually 26 .
24
2I30101A-En_p18-25
24
11/25/05, 16:31
To set STANDARD TIME
In the rare event that you live within broadcast range of two
stations in two different time zones, the DVD/VCR may
recognize the wrong station for the AUTO CLOCK setting.
To correct the situation:
You can set the DAYLIGHT SAVING TIME automatically or
manually.
Press VCR MENU.
Press SET + or â to select âSYSTEM SETUPâ,
then press ENTER.
Basic setup (VCR)
Press VCR MENU.
To set DAYLIGHT SAVING TIME
Press SET + or â to select âSYSTEM SETUPâ,
then press ENTER.
Press SET + or â to select your time zone,
then press ENTER.
ATLANTIC : GMTâ4hours
EASTERN : GMTâ5hours
CENTRAL : GMTâ6hours
MOUNTAIN : GMTâ7hours
PACIFIC
: GMTâ8hours
ALASKA
: GMTâ9hours
HAWAII
: GMTâ10hours
AUTO
: AUTO SET
(GMT: Greenwich Mean Time)
Press SET + or â to select âDAYLIGHT
SAVING TIMEâ, then press ENTER.
Press SET + or â to select âSTANDARD TIMEâ,
then press ENTER.
⊠âŞ
Press SET + or â to select one of the
options, then press ENTER. Press VCR
MENU until the MENU screen is cleared.
for manual setting
(forward one hour)
for manual setting
OFF:
(back one hour)
AUTO: for automatic setting
(read XDS in the signal)
ON:
When you want to set the DAYLIGHT
SAVING TIME manually, on the first
Sunday in April you set to âONâ, and
on the last Sunday in October you set
to âOFFâ.
Press VCR MENU until the MENU screen is
cleared.
âŠ
âŞ
Notes:
⢠When shipped from factory, the DAYLIGHT SAVING TIME is
Notes:
set to âAUTOâ position.
⢠To be able to select the standard time, the clock must first be
⢠When the clock is not set, DAYLIGHT SAVING TIME setting
set by AUTO CLOCK once.
is not available.
⢠If you live in Newfoundland and the AUTO CLOCK does not
function properly, set the AUTO CLOCK menu option to âOFFâ ⢠When there is no DAYLIGHT SAVING TIME in your area, always select âOFFâ position in step 3.
and set the clock manually.
25
2I30101A-En_p18-25
25
11/25/05, 16:31
Basic setup (VCR)
Clock setting (Continued)
VCR MENU
SET +/â
If the AUTO CLOCK process did not set the date and time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVING TIME.
ENTER
CANCEL
Manual clock setting
EXAMPLE: Setting the clock to â8:30 AMâ March, 25
(SAT), 2006.
Press VCR MENU.
Press SET + or â to select âSYSTEM SETUPâ,
then press ENTER.
8 : 30AM SAT
After setting the clock, date and time starts
functioning automatically.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or â.
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
Press SET + or â to select âCLOCK SETâ,
then press ENTER.
⊠âŞ
Press SET + or â to set the month, then press
ENTER.
MONTH
DAY
1 (WED)
YEAR
2006
TIME
12 : 00AM
âŠ+/â/ENTER/CANCEL/MENU âŞ
Set the day, year and time as in step 4.
MONTH
DAY
25 (SAT)
YEAR
2006
TIME
8 : 30AM
âŠ+/â/ENTER/CANCEL/MENU âŞ
26
2I30101A-En_p26-31
26
11/25/05, 16:31
Tuner setting
VCR DVD
VCR MENU
This DVD/VCR is equipped with a channel memory feature which allows
channels to skip up or down to the next channel set into memory,
skipping over unwanted channels. Before selecting channels, they must
be programmed into the DVD/VCRâs memory. In addition to normal
VHF and UHF channels, this DVD/VCR can receive up to 113 Cable
TV channels. To use this DVD/VCR with an antenna, set the TV/CABLE
menu option to the TV mode. When shipped from the factory, this menu
option is in the CABLE mode.
TV/CABLE selection
SET +/â
Setting channels automatically
⢠Turn ON the TV and select to the corresponding
video input.
⢠Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Repeat left step 1 and press SET + or â to
select âAUTO CH MEMORYâ.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
Press VCR MENU. Press SET + or â to select
âCH SETUPâ, then press ENTER.
âŠ+/-/ENTER/MENU âŞ
Press ENTER.
Auto tuning will begin. The channel display will count up and when finished,
the screen returns to normal.
Basic setup (VCR)
Preparation:
ENTER
+0
Press SET + or â to select âTV/CABLEâ.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
+/Ă/ENTER/MENU
Press ENTER to select the TV or CABLE
mode.
The arrow indicates the selected mode.
CH SETUP
TV CABLE
AUTO CH MEMORY
ADD/DELETE
TV
- VHF/UHF channels
CABLE - Cable TV channels
+/Ă/ENTER/MENU
Press VCR MENU until the menu screen is
cleared.
Note:
You canât select âCH SETUPâ if you set the channel to âL1â or
âL2â.
27
2I30101A-En_p26-31
27
11/25/05, 16:31
Basic setup (VCR)
Tuner setting (Continued)
VCR MENU
ENTER
SET +/â
0â9
To ADD/DELETE channels
Noise elimination
Repeat the step 1 on page 27 . Then press SET +
or â to select the âADD/DELETEâ and press ENTER.
CH SETUP
When you don't want to receive a weak signal broadcast, a Blue
back screen can be obtained by selecting the NO NOISE BACKGROUND âONâ. When the unit is shipped from the factory, the
NO NOISE BACKGROUND is set to âONâ.
TV CABLE
AUTO CH MEMORY
ADD/DELETE
Repeat the steps 1~2 on page 26 and press SET
+ or â to select âNO NOISE BACKGROUNDâ.
⊠âŞ
+/Ă/ENTER/MENU
To Add or Delete desired channels
1) Press Direct channel selection buttons (0â9)
or SET +/â to select a channel number you want
to add or delete.
2) To add channels
Press ENTER until âADDâ appears on the screen.
To delete channels
Press ENTER until âDELETEâ appears on the
screen. The channel number will blink
Press ENTER to select âONâ or âOFFâ position.
Press VCR MENU until the menu screen is
cleared.
⊠âŞ
3) Repeat 1) to 2) to add or delete other channel.
Press VCR MENU until the menu screen is
cleared.
28
2I30101A-En_p26-31
28
11/25/05, 16:32
Playback (VCR)
Loading and unloading a cassette tape
Use only video cassette tapes marked
EJECT
Loading
Push the center of the tape until it is automatically
inserted.
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Basic setupPlayback
(VCR) (VCR)
Erase prevention tab
Automatic power ON
When you insert a cassette tape the DVD/VCR power will turn ON automatically.
Automatic playback
When loading a cassette tape without an erase prevention tab, playback will start automatically.
Unloading
Press EJECT on the front panel or on the remote.
Remove the cassette tape.
or
Automatic tape eject
This DVD/VCR will automatically rewind the tape when the tape has ended. Once the tape is rewound to its beginning,
the cassette tape will be ejected automatically.
To prevent accidental erasure
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
To record again
Cover the hole with a piece of adhesive tape.
Screwdriver
Erase prevention tab
Adhesive tape
Tape speed and maximum recording time
Tape Speed
Video cassette tape
T-160
T-120
T-90
T-60
T-30
SP (Standard Play)
2-2/3 hours
2 hours
1-1/2 hours
1 hour
30 minutes
SLP (Super Long Play)
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
29
2I30101A-En_p26-31
29
11/25/05, 16:32
Playback (VCR)
Cassette tape playback
VCR DVD
To play a prerecorded tape.
STOP
PLAY
FWD
REV
Playback
Rewind or forward the tape
Preparation:
Stop the playback via STOP on remote.
⢠Turn ON the TV and select the corresponding video input.
⢠Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light).
To rewind the tape:
Press REV.
Load a prerecorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
To forward the tape:
Press FWD.
To start playback
Press PLAY.
Playback will start. â â will appear
on the screen for about 4 seconds.
To discontinue the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
Forward/Reverse picture search mode
To stop playback
Press STOP once.
The tape will stop but remain fully
loaded and ready to play.
â â will appear on the screen for
about 4 seconds.
When the tape is being winded, you can switch to picture
search mode (see next page). To do this, press REV or
FWD and hold it down. The unit will resume the tape
advance or rewinding as soon as the button is released.
Notes:
⢠This VCR selects the playback tape speed SP, LP or SLP automatically.
⢠The Cassette tape and DVD disc can be played back simultaneously. If you press VCR DVD selector, the tape playback
and DVD playback alternate with each other on the screen
(via CH3, 4 or video connection).
30
2I30101A-En_p26-31
30
11/25/05, 16:32
CM SKIP
SLOW
SET +/â
Special playback
PAUSE/STEP
PLAY
FWD
REV
ATR
Picture search
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback, the
automatic tracking feature continuously analyzes the signal
to enable optimum picture quality during playback.
SPEED SEARCH TIMES
TAPE SPEED
PICTURE SEARCH SPEED
PRESS ONCE
PRESS TWICE
SP (Standard Play)
3X
5X
LP (Long Play)
7X
9X
SLP (Super Long Play)
9X
15 X
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET +/â to eliminate the noise. âMANUAL
TR.â will appear on the screen. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
Playback (VCR)
Reverse picture search function
Press REV once or twice during playback.
Forward picture search function
Press FWD once or twice during playback.
To return to playback, press PLAY.
Press ATR to reactivate automatic tracking again.
âAUTO TR.â will appear on the screen.
Still picture
Press PAUSE/STEP during playback.
To resume normal playback, press PLAY or PAUSE/STEP.
Slow motion
During playback press SLOW.
To return to playback, press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the SET +/â to reduce the noise bars.
If the still picture jitters excessively, press SET +/â to
stabilize the still picture.
Notes:
⢠The audio output is muted during PICTURE SEARCH, STILL
PICTURE SLOW MOTION and FRAME BY FRAME
PICTURE.
⢠During picture search mode there will be noise bars. This is
not a defect.
⢠Playback will commence after approx. 5 minutes to protect
the video tape against excessive wear during pause mode.
Video head cleaning
Video head clogging
The video heads are the means by
which the DVD/VCR reads the picture
from the tape during playback. In the
Press PAUSE/STEP during playback.
unlikely event that the heads become
Press SLOW repeatedly: The picture advances frame by
dirty enough to be clogged, no picture
frame.
will be displayed. This can easily be
To return to playback, press PLAY or PAUSE/STEP.
determined if, during playback of a
known good tape, there is good sound,
but no picture (picture is extremely
snowy). If this is the case, have the
DVD/VCR checked and cleaned by
Press CM SKIP during playback. The DVD/VCR will search qualified service personnel.
Frame by frame picture
Good Picture
CM skip
Snowy Picture
forward through approximately 30 seconds of the tape (e.g.
unwanted commercial time) for each press of CM SKIP (maxi- Notes:
mum six presses) and then resume normal playback.
⢠DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR
For example
: 1 press: 30 seconds of tape
2 press: 60 seconds of tape
3 press: 90 seconds of tape
SERVICE THE UNIT BY REMOVING THE REAR COVER.
⢠Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
⢠To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
31
2I30101A-En_p26-31
31
11/25/05, 16:32
Playback (VCR)
CLOCK/COUNTER
VCR MENU
SET +/â
Convenience function
ENTER
STOP
PLAY
CALL
ZERO RETURN
COUNTER RESET
Repeat playback
Zero return function
The entire video tape will play until its end. The tape will
automatically rewind to the beginning and the playback will be
repeated.
Press VCR MENU.
Press SET + or â to select âAUTO
REPEATâ.
This function rewinds the tape to the â00:00â counter position
automatically.
Press CLOCK/COUNTER.
Press COUNTER RESET at the desired tape
position.
Press STOP when playback or recording is
completed.
Press ZERO RETURN.
The counter display shows the tape running time during playback or recording.
Press ENTER to select âONâ or âOFFâ.
If âONâ is selected, the playback
will be repeated endlessly.
The counter display will be reset to
â00:00â position (e.g. the beginning of
recording).
Press VCR MENU until the menu screen is
cleared.
To confirm whether AUTO REPEAT
function is turning ON or OFF, press
CALL. If â â is displayed, it is
turning ON 11 .
The tape will automatically rewind or fast
forward to the â00:00â counter position.
To commence playback, press PLAY.
The playback will be repeated
endlessly.
To cancel repeat mode:
Follow the above step 1, then press ENTER to select
âOFFâ position. Press VCR MENU to return to the TV.
32
2I30101A-En_p32-37
32
11/25/05, 16:32
VCR DVD
CLOCK/COUNTER
STOP
INDEX +/â
Clock/counter display
Press CLOCK/COUNTER. The clock and tape counter
alternate with each other in the display window.
COUNTER
Press VCR DVD selector. The DVD mode and the
VCR mode alternate with each other in the display.
DVD mode
This function enables you to locate the beginning of any recording
made on the VCR.
Recording an INDEX mark
The Index Search function automatically records an INDEX mark
on the tape whenever a recording
is initiated.
CH 001
Playback (VCR)
CLOCK
Video index search system
INDEX
Index search
Press INDEX + or â during stop or play mode.
For Succeeding programs: Press INDEX +.
For Preceding programs: Press INDEX â.
(As many as 9 index points can be accessed via this
method.)
When the INDEX + or â is pressed,
the unit starts searching the INDEX
NO. selected and finds the portion,
then playback starts automatically.
To stop the Index Search, press
STOP.
or
is displayed
INDEX NO. (up to 9)
VCR mode
Notes:
⢠If you rewind the tape beyond â00:00â, a minus sign (âââ) will
be displayed in front of the time.
⢠When you load a tape, the counter will reset to â00:00â.
⢠The counter does not function on nonrecorded (blank)
sections of the tape. When you rewind, fast forward or play
tapes through blank sections, the counter stops.
Notes:
⢠When you record an INDEX mark at the very beginning of the
tape, the mark may not be found.
⢠During INDEX search, the tape may stop and begin to play at a
slightly different location.
⢠INDEX may not function properly with old or worn out video tapes.
⢠INDEX marks may not be found if it is extremely close to the point
where the search began.
⢠In recording, if you stop recording temporarily, the INDEX mark
is not recorded on the tape.
SQPB (S-VHS Quasi Playback)
You can playback video cassette tapes recorded in the
S-VHS system.
However, the picture will not have the high resolution of
S-VHS system.
Note: You cannot record S-VHS video format with this VCR.
33
2I30101A-En_p32-37
33
11/25/05, 16:32
Recording (VCR)
VCR DVD
Recording a TV program
CH +/â
Recording and viewing the same TV program.
REC/OTR
SP/SLP
0â9
Recording a TV program
Preparation:
⢠Turn ON the TV and select to the corresponding
video input.
⢠Press VCR DVD selector to select the VCR mode.
(The VCR mode indicator will light.)
Press Number buttons or CH +/â to select the
channel to be recorded.
+0
Load a cassette tape with the erase prevention
tab intact.
The DVD/VCR will automatically turn on.
TV mode direct channel selection:
All channels can be instantly selected by using two
buttons. (for example, to select channel 2, press â0â, then
â2â. If you press only â2â, channel selection will be delayed
for two seconds.) For channels 10 and above, press the 2
digits in order.
CABLE mode direct channel selection:
1-9
Press SP/SLP to select the desired tape speed
SP or SLP.
The tape counter and âSPâ or âSLPâ
will appear on the screen for about 4
seconds.
Press 0 twice and then 1-9 as required.
Example: To select â2â, Press 002.
10-12
Press 0 first and then the remaining 2 digits in
order from left to right.
Example: Press 012 for â12â.
13-99
Press 2 digits in order.
Example: Press 22 for â22â.
100-125 Press the 3 digits in order.
Example: Press 110 for â110â.
VHF/UHF/CABLE TV CHANNELS
TV
VHF
2-13
UHF
14-69
00 : 00 : 00 SP
CABLE TV
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
Select âTVâ or âCABLEâ to the appropriate
position 27 .
TV
- VHF/UHF channels
CABLE - Cable TV channels
Press REC/OTR.
â â will appear on the screen
for about 4 seconds and âRECâ will
appear on the display window.
CH 110
INDEX
34
2I30101A-En_p32-37
34
11/25/05, 16:32
TV/VCR
PAUSE/STEP
STOP
To stop recording
Press STOP to stop recording.
â â will appear on screen for about
4 seconds.
Recording one program while
watching another
While the VCR is recording, select your desired channel
on the TV.
When a TV is connected with an antenna cable only,
press TV/VCR to select the TV position.
The âVCRâ display will go off and recording will continue.
Select the TV channel you want to watch by using the
TV channel selector.
To stop recording temporarily
Press PAUSE/STEP to avoid recording unwanted
material. Press again to continue the recording.
Recording (VCR)
Note:
Some Cable TV hookups do not permit viewing one channel
while recording another. See pages 16 and 17 .
â
â will appear on screen for
about 4 seconds.
Notes:
⢠The pause function will be released after 5 minutes to prevent
damage to the tape or the VCR. The VCR will change to the
STOP mode.
⢠You can select a recording channel in the recording pause
mode.
Auto Rewind feature
This VCR will automatically rewind the tape when the tape
has ended (except during OTR and timer recording). It will
also eject the tape.
35
2I30101A-En_p32-37
35
11/25/05, 16:32
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:12:06 18:27:35+09:00 Create Date : 2005:12:06 18:27:07+09:00 Title : 2I30101A-En_cov Author : soon Creator : PageMaker 6.5 Producer : Acrobat Distiller 5.00 for Macintosh Page Count : 35 Mod Date : 2005:12:06 18:27:35+09:00 Creation Date : 2005:12:06 18:27:07+09:00 Metadata Date : 2005:12:06 18:27:35+09:00 Has XFA : NoEXIF Metadata provided by EXIF.tools