ORION ELECTRIC M2J4B DVD / VCR TV Interface Device User Manual 2J40801A En 01 05
ORION ELECTRIC CO., LTD. DVD / VCR TV Interface Device 2J40801A En 01 05
Contents
- 1. User Manual 1
- 2. User Manual 2
- 3. User Manual 3
User Manual 2
Playback
05
46
En
Playing back JPEG files
JPEG CD
JPEG files must have the extension letters “.jpe”, “.jpeg”
or “.jpg”.
1Press or to select JPEG file.
•In case the disc includes more than 10 files, you can
turn to the next or the previous page. (See page 42.)
Alone.jpg
Ambassadeurs-Aristide_Bruant.jp
Arlstide Bruant.jpg
At_the_Moulin_Rouge.jpg
Clown Cha-U-Kao.jpg
Dancer Seated.jpg
EI Dorado.jpg
Galerie 65 Cannes.jpg
Jane Avril-1893.jpg
Alfred Ia Guigne.jpg
/popArt
BROWSER
ENTER
RETURNPLAY BACK
SET
END
SELECT
TITLE
MENU
2Carry out either of the item a or b below.
a: Press ENTER.
b: Press to select “PLAY” and press ENTER.
The thumbnail images of the JPEG files stored in the
route directory or the folder appear.
Press , , or to select the pages of the thumbnail
images, or select the JPEG file to be displayed at first for
the slide show.
Base_ball.jpg Friend.jpg Drive.jpg
party_240803.jpg practice_ski.jpg My_car.jpg
ENTER
RETURNPLAY BACK END
SELECT SELECT
TITLE
MENU
3Press ENTER to play the selected picture.
If you have set the interval time for JPEG slide show, the
pictures will be played back one after another automati-
cally. (See page 32.)
•Press ZOOM to enlarge the displayed image.
•Press ANGLE to rotate the image by 90 degrees
each time.
4To return to the thumbnail screen, press RE-
TURN.
•To stop the slide show, press TITLE MENU.
2J40801A_En_40_47 15/5/06, 2:52 PM46
Playback 05
47
En
1Press or to select DivX® file.
• If the disc includes more than 10 files, you can
move to the next or previous page. (See page 42.)
2Carry out the item a or b listed below.
a: Press ENTER.
b: Press and then press or to select
“PLAY” and press ENTER.
The selected title is played back.
•You can use Fast forward, Review, Still, Frame
advance, SKIP /, and Slow motion playback
(See page 36).
Note
•It may take a while to start to play DivX® video.
Please wait until picture appears on screen.
If the incorrect DRM file is loaded, “Authorization Error
This player is not authorized to play this video.” will
appear on the screen.
When you attempt to play DivX® VOD, the number of
plays is limited and the following message will appear
on the screen. If you wish to play it, select “YES”.
•If the number of plays goes over the limit, then
“Rental Expired” will be displayed, in which case
the file will not be played.
Playing back DivX
®
video files
DivX
®
video specifications
• DivX® file must have the extension
letters “.avi” “.div” or “.divx”
• DivX® version: DivX® 3, 4, 5, and 6 (specifically 3.1.1,
4.1.2, 5.0.2, 5.0.5, 5.1.1, 5.2.1, 6.0 at Home Theater
profile).
Audio format:
MPEG1 Layer2 (MP2), MPEG1 Layer3(MP3)
Bit rate: 8kbps - 320kbps
Sampling frequencies: 32kHz, 44.1kHz, 48kHz
Resolution: Max 720 x 576 (at 25fps)
Max 720 x 480 (at 30fps)
Note
•Character setting for external subtitle setting
corresponds ISO8859-1 (Latin1) only. Other
character code cannot be displayed.
•For external subtitle files the following subtitle
format filename extensions are supported (please
note that these files are not shown within the disc
navigation menu): “.sub” “.smi” “.srt” “.ssa” “.txt”
“.ass” “.rt” “.aqt” “.psb”
•The filename of the movie file has to be repeated at
the beginning of the filename for the external
subtitle file.
2J40801A_En_40_47 15/5/06, 2:52 PM47
Playback
05
48
En
Preparation:
•Connect to a TV equipped with component jacks
which support progressive video input.
•Turn ON the TV and set it to the corresponding
video input mode.
•Press DVD/VCR to select the DVD mode. (The DVD
indicator will light.)
1Press PROGRESSIVE. The PROGRESSIVE indicator
“P” on the display window will light. And
“COMPONENT: 480p” will appear on the display.
•The unit recognizes the picture source (film or
video) of the current disc according to the disc
information.
2Press PLAY to start playback.
P
•To make the progressive scanning mode inactive,
press PROGRESSIVE. The PROGRESSIVE indicator
“P” on the display window will go off, and “COM-
PONENT: 480i” will appears on the display.
Different scanning modes
Interlaced scan
Technology that alternately displays odd-numbered
scanning lines and even-numbered scanning lines. Also
called “480i”, “i” meaning “interlace”.
Progressive scan
Technology that simultaneously displays odd-numbered
scanning lines and even-numbered scanning lines from top
to bottom. Also called “480p”, “p” meaning “progressive”.
Note
•Some discs may not be played back with the
progressive scan mode correctly because of the
disc characteristics or recording condition.
•There are some progressive TV and High-Definition
TV sets that are not fully compatible with the unit,
resulting in an unnatural picture when playing back
a DVD disc in the progressive scan mode. In such a
case, use the interlaced scanning mode.
•You cannot activate the progressive scan mode in
the following cases:
- the unit is in the VCR mode.
•S-Video and the Video out jack cannot output at the
same time when progressive scanning mode is
appeared.
Progressive scan
DVD-Video
RAM
VR mode
Video mode
DVD-R
The unit supports the progressive scanning system as
well as the conventional interlaced scanning system. If
your TV is equipped with component video input jacks
which support the progressive video input, you can
enjoy higher picture quality by making the progressive
scanning mode active.
2J40801A_En_48_52 15/5/06, 2:52 PM48
Playback 05
49
En
Loading and unloading a cassette tape
VCR
Use only video cassette tapes marked and
.
• Cassettes marked “VHS” (or “S-VHS”) can be used
with this video cassette recorder. However, S-VHS
recording is not possible with this model.
• This model is equipped with SQPB (S-VHS QUASI
PLAYBACK) that makes it possible to playback S-
VHS recordings with regular VHS resolution.
•HQ VHS is compatible with existing VHS equip-
ment.
Loading
Push the center of the tape until it is automatically
inserted.
P
Insert the cassette tape with its labeled side facing up
and the erase prevention tab positioned at your left. An
inverted cassette tape cannot be inserted.
Erase prevention tab
Screwdriver
Erase prevention tab
Unloading
You can eject the video tape while the unit is turned off.
1Press EJECT on the unit or the remote control.
2Remove the cassette tape.
Automatic tape eject
This VCR will automatically rewind the tape when the
tape has ended. And when the tape is rewound to its
beginning, the cassette tape will be ejected automati-
cally.
To prevent accidental erasure
Remove the erase prevention tab with a screwdriver.
Automatic power ON
When you insert a cassette tape the VCR power will turn
ON automatically.
Automatic playback
When loading a cassette tape without an erase preven-
tion tab, playback will start automatically.
Adhesive Tape
Tape speed and maximum recording time
We do not recommend using video tapes longer than 160 minutes.
To record again
Cover the hole with a piece of adhesive tape.
Video cassette tape
Tape Speed
EP (Expanded Play)
T-160 T-120 T-90 T-60 T-30
2-2/3 hours 2 hours 1-1/2 hours 1 hour 30 minutes
8 hours 6 hours 4-1/2 hours 3 hours 1-1/2 hours
SP (Standard Play)
2J40801A_En_48_52 5/15/06, 7:27 PM49
Playback
05
50
En
1 Load a prerecorded tape
(When loading a cassette tape without the erase
prevention tab, playback will start automatically).
2To start playback
Press PLAY. Playback will start. “ ” will appear on the
screen for about 4 seconds.
To stop playback
Press STOP once. The tape will stop but remain fully
loaded and ready to play. “ ” will appear on the screen
for about 4 seconds.
To rewind the tape or forward it rapidly
Press STOP.
To rewind the tape:
Press REW.
To forward the tape:
Press F.FWD.
To stop the tape-winding, press STOP. To switch to
playback directly (without STOP), press PLAY.
Forward/Reverse picture search mode
When the tape is being wound, you can switch to
picture search mode (see next page). To do this, press
REW or F.FWD and hold it down. The unit will resume
the tape winding as soon as the button is released.
Cassette tape playback
VCR
Note
•This VCR selects the playback tape speed SP, LP or
EP automatically.
•It is impossible to switch to the VCR mode while
DVD is played back
Preparation:
•Turn ON the TV and set to the video input mode.
•Press DVD/VCR to select the VCR mode. (The VCR
indicator will light.)
2J40801A_En_48_52 15/5/06, 2:52 PM50
Playback 05
51
En
8 : 30
AM
MON
00 : 15 : 12 SP
HI-FI
TAPE IN
OPERATING
MODE
HI-FI
STEREO
AUTO
REPEAT
Special playback
VCR
Note
•The audio output is muted during SPEED SEARCH,
STILL, FRAME ADVANCE and SLOW MOTION.
• During picture search mode there will be noise
bars which are caused by the system.
•The Special Playback will automatically change to
playback after approx. 5 minutes to protect the
video tape against excessive wear.
Picture search
Reverse picture search function
Press REW x 1 or x 2 during the playback.
Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.
Still picture
Press PAUSE during playback.
To resume normal playback: Press PLAY or PAUSE.
Slow motion
During playback press SLOW.
To return to playback: Press PLAY or SLOW.
Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRK + or – to reduce the noise bars.
If the still picture jitters excessively, press TRK + or – to
stabilize the still picture.
Frame by frame picture
Press PAUSE during playback.
Each time you press SLOW, the picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE.
Adjusting tracking condition
Automatic tracking adjustment
Whenever you insert a tape and start playback, auto-
matic tracking starts working and continuously analyzes
the signal to enable optimum picture quality during
playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well
during playback, press TRK + / – to eliminate the noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.
•Press ATR to reactivate automatic tracking again.
“AUTO TR.” will appear.
Repeat playback
The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.
1Press REPEAT while the VCR is playing back.
2By pressing REPEAT each time, “REPEAT ON” or
“REPEAT OFF” is selected in turn.
3 When “REPEAT ON” is selected, the tape is
played back to the end, and then, it is automatically
rewound to the starting point and played back
again.
The display “REPEAT ON” goes out in about 3 seconds.
To cancel repeat playback: Press REPEAT to select
“REPEAT OFF”.
Commercial skip
Press CM SKIP during playback.
The video is rapidly forwarded for approx. 30 seconds
and playback resumes.
You may press the button up to six times in a row to
move 180 seconds ahead.
To display VCR operation status
Press DISPLAY. The clock, day of the week and more
information will be indicated.
While watching TV
PICTURE SEARCH SPEED
PRESS TWICE
TAPE SPEED PRESS ONCE
SP (Standard Play)
LP (Long Play)
EP (
Expanded
Play)
5 X
9 X
15 X
3 X
7 X
9 X
SPEED SEARCH TIMES
CH 125
8 : 47
AM
MON
00 : 00 : 00 SP
STEREO SAP
DAY OF THE
WEEK
CLOCK
STEREO AND
SECOND
AUDIO
PROGRAM
(SAP)
CHANNEL
TAPE SPEED
REAL TIME
COUNTER
While operating a tape
To cancel the display:
Press DISPLAY until all indicators disappear.
2J40801A_En_48_52 15/5/06, 2:52 PM51
Playback
05
52
En
ZERO RETURN function / Video index
search system
VCR
ZERO RETURN function
This function makes tape rewinding stop at the counter
“00:00:00” position automatically.
Note
•If you rewind the tape beyond “00:00:00”, a minus
sign (“–”) will be displayed in front of the time.
•When you load a tape, the counter will reset to
“00:00:00”.
•The counter does not function on nonrecorded
(blank) sections of the tape. When you rewind, fast
forward or play tapes through blank sections, the
counter stops.
1Press DISPLAY.
The counter display shows the tape running time during
playback or recording.
8 : 47
AM
MON
00 : 04 : 38 SP
HI-FI
2Press COUNTER RESET at the desired tape
position. The counter display will be reset to the
“00:00:00” position (e.g. the beginning of recording).
8 : 47
AM
MON
00 : 00 : 00 SP
HI-FI
3Press STOP when playback or recording is
finished. Press ZERO RETURN.
The tape will be rewound or fast forwarded and auto-
matically stop at the “00:00:00” position.
Switching the display between clock and counter
Press CLOCK/COUNTER. The clock and tape counter
alternate with each other in the display.
Video index search system
This function enables you to locate the beginning of any
recording made on the VCR.
Note
•When you record an INDEX mark at the very
beginning of the tape, the mark may not be found.
• During INDEX search, the tape may stop and begin
to play at a slightly different location.
•INDEX may not function properly with old or worn
out video tapes.
•INDEX marks may not be found if it is extremely
close to the point where the search began.
•In recording, if you stop recording temporarily, the
INDEX mark is not recorded on the tape.
Recording an INDEX MARK
The Index search function automatically records an
INDEX mark on the tape whenever a recording is
initiated.
CH 001
INDEX
Index search
Press INDEX or during stop or play mode.
For Succeeding programs: Press INDEX .
For Preceding programs: Press INDEX .
(Additional press increases the INDEX NO. up to 9.)
When the INDEX INDEX or is pressed, the unit
starts searching the INDEX NO. selected and finds the
portion, then playback starts automatically.
To stop the Index Search, press STOP.
4or ¢is
displayed
INDEX NO.
(up to 9)
2J40801A_En_48_52 15/5/06, 2:52 PM52
Recording 06
53
En
Read this before recording on disc
This section explains what you must know to record
onto a disc. Read it before attempting to record.
Types of disc
You can use DVD-RAM, DVD-RW and DVD-R discs to
record video.
DVD-RAM
• This mode involves mutiple editing functions.
•Various editing options using a created Playlist.
DVD-RW discs
•Ver 1.1/1.2 discs can be formatted for recording in
either of the two modes: the VR mode or the Video
mode. Ver.1.0 discs can only be formatted for
recording in the VR mode.
•High quality images and sound can be repeatedly
recorded about 1,000 times.
•A disc formatted in the VR mode can have as many
as 99 original titles and playlist titles each. Discs
formatted in the Video mode can have up to 99
original titles.
DVD-R discs
•Discs can only be recorded in the Video mode.
•Discs can be recorded only once.
• Up to 99 titles can be created.
For more information on recording format, see
“Recording format” (page 10).
Notes on recording in the Video mode
•The Video mode cannot be selected for Ver. 1.0
DVD-RW discs.
•The remaining available area on the disc decreases
as recording progresses. Additional contents can
be recorded in the remaining time area, but it
cannot be overwritten into the recorded area.
•To format a new DVD-RW in the Video mode, set
the automatic format feature to the Video mode.
(See page 27.)
Note
•Should a power failure occur or should the AC cord
plug be disconnected while recording, editing,
initializing, finalizing or any other function, the
Chapter 6
Recording
Recording
mode
XP
SP
LP
EP
Recording time
Approx. 60 min
Approx. 120 min
Approx. 240 min
Approx. 360 min
Quality
Can record high quality
images.
Can record normal
quality images.
Quality deteriorates
slightly, but recording
time is longer.
Recording time is
prioritized over quality.
program being recorded will be lost or the disc may
not be playable. Manufacturer cannot guarantee
against loss of program or disc should this occur.
Recording modes
There are 4 modes for recording on disc. Recording
time and quality vary according to mode.
•Recording time above is based on a 4.7GB disc.
Please note that there is a trade-off between recording
time and quality. The longer the possible recording time,
the lower the recorded picture quality. You may wish to
try recording different kinds of program in different
modes to determine the combination of picture quality
and recording time that suits your needs.
We recommend that the XP mode be used for recording
fast moving or action programs.
Since DVD recording is performed using VBR (Variable
Bit Rate), recording time varies according to the
recorded content.
To know the correct recording time, stop recording and
check the media information. (See page 35.)
Note
•Recording time can change for the following
reasons.
- When image quality is poor as during poor TV
reception.
- When recording on a disc that has been edited
before.
- When the video is followed with recordings of still
images or just audio.
2J40801A_En_53_58 15/5/06, 2:52 PM53
Recording
06
54
En
Disc remaining time
VR mode
•Recording is possible as long as there is available
space on the disc. (Finalized discs can be recorded
by cancelling the finalization, see “UNDO FINAL-
IZE” on page 28.)
•Erasing unnecessary title frees up available space
on the disc. (Titles can be erased from finalized
discs by first undoing the finalization. See “UNDO
FINALIZE” on page 28.)
Video mode
•Up until the disc is finalized, recording is possible
as long as there is available space on the disc.
(Once the disc has been finalized, additional
recording and erasing are not possible.)
•The remaining time cannot be increased, nor can
recorded title be overwritten.
•Titles cannot be erased nor can recorded titles be
overwritten.
Images that cannot be recorded
Some DVD-Video and broadcasts contain copy-restric-
tion signals to protect copyrights. There are 3 types of
copy-restriction signals: “Copy Free”, “Copy Never” and
“Copy Once”.
“Copy Free” (unrestricted recording)
Land-based TV broadcasts and images you record
yourself with a video camera allow unrestricted record-
ing. There are no restrictions on recording.
“Copy Never” (recording prohibited)
•Images that contain the recording prohibited signal
cannot be recorded.
•If the recording prohibited signal appears halfway
through an image you are recording, recording is
paused at that instant. When the recording
prohibited signal ends, recording resumes.
•This unit incorporates a built-in copy guard. It
cannot record software or broadcasted programs
that contain copy restriction signals designed to
protect copyright, etc.
“Copy Once” (one-time recordable)
Programs (images) that contain the one-time recordable
signal can be recorded only in the VR mode using a
DVD-RW disc that supports CPRM Ver. 1.1 and Ver. 1.2.
Note
•When using one touch timer recording to record on
a DVD disc, it takes some time from when you
press REC until recording actually starts.
Press REC a little before your preferred starting
point.
•Even if STOP is pressed during recording, record-
ing does not stop instantly. It takes a maximum of 1
minute for the information needed for the disc to be
compiled after pressing STOP.
•Because of characteristics peculiar to digital video
compression technology, scenes with fast motion
may appear as a matrix of larger blocks.
CPRM
CPRM is a copy protection/scrambling system devel-
oped for the recording of ‘copy once’ broadcast
programs. CPRM stands forContent Protection for
Recordable Media.
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
recordings can only be made on CPRMcompatible DVD-
RW (ver. 1.1 or higher) discs formatted in VR mode or
DVD-RAM discs.
DVD CPRM recordings can only be played on players
that are specifically compatible with CPRM.
2J40801A_En_53_58 15/5/06, 2:52 PM54
Recording 06
55
En
Recording a TV program
RAM
VR mode
Video mode
DVD-R
VCR
You can record programs you watch on TV onto video
tapes or DVDs.
Preparation:
•Turn ON the TV and set it to the video input mode.
•Load a recordable DVD or video tape into the unit.
•Press DVD/VCR to select the appropriate mode.
1Press REC MODE/SPEED to select the recording
mode.
The recording mode will appear on the TV monitor and
change every time REC MODE/SPEED is pressed.
VCR recording modes: SP/EP
DVD recording modes: XP/SP/LP/EP
SP is the normal recording mode for video tapes. EP
offers 3 times the recording time as SP. For more
information on DVD recording modes, see page 53.
2Set the TV/CABLE option to the appropriate
position (page 32).
3Press the numeric keys or CH +/– to select the
channel to be recorded.
1-9 Press 0 twice and then 1-9 as required.
Example: To select 2, Press “002”.
10-12 Press 0 first and then the remaining 2
digits in order from left to right.
Example: Press 012 for “12”.
13-99 Press 2 digits in order.
Example: Press 22 for “22”.
100-125 Press the 3 digits in order.
Example: Press 110 for “110”.
TV - VHF/UHF channels
CABLE - CABLE TV channels
CABLE
VHF
2-13
STD/HRC/IRC
14-36 (A) (W)
37-59 (AA) (WW)
60-85 (AAA) (ZZZ)
86-94 (86) (94)
95-99 (A-5) (A-1)
100-125 (100) (125)
01 (5A)
VHF/UHF/CABLE CHANNELS
TV
VHF
2-13
UHF
14-69
2J40801A_En_53_58 15/5/06, 2:52 PM55
Recording
06
56
En
Auto Rewind feature
This VCR will automatically rewind the tape when the
tape has ended (except during OTR and TIMER REC). It
will also eject the tape.
Note
• If the disc space become full, the recording is
stopped and “NO SPACE ON THE DISC.” will
appear on the screen.
To stop recording
Press STOP to stop recording.
“ ” will appear on the screen for about 4 seconds.
Note
•When recording onto a DVD, even if STOP is
pressed during recording, recording does not stop
instantly. It takes a maximum of 1 minute for the
information needed for the disc to be compiled
after pressing STOP.
To stop recording temporarily
Press PAUSE/STILL to avoid recording unwanted
material.
“” will appear on screen for about 4 seconds.
Press again to resume recording.
Note
•In video recording, the pause function will be
released after 5 minutes to prevent damage the
video tape. The unit will change to the STOP mode.
• When recording onto a video tape, you can select a
recording channel in the recording pause mode
(You cannot change a recording channel in the
DVD recording pause mode.).
•Chapter marks are made when recording to a DVD
in the VR Mode.
4Press REC.
When recording starts, “ ì ” appears on the screen for
about 4 seconds.
Note
•When recording onto a DVD, it takes some time
from when you press REC until recording actually
starts.
Press REC slightly earlier before the preferred
starting point.
With a video tape, recording starts almost at the
same time as you press REC.
•If the erase prevention tab of video tapes is
removed, the tape will eject when REC is pressed
for recording.
Recording one program while watching another
While the unit is recording, press TV/VIDEO to select
the TV position.
The “TV” will go on and recording will continue.
Select the TV channel you want to watch by using the TV
channel selector.
Note
•Some CATV hookups do not permit viewing one
channel while recording another. See pages 18, 19.
2J40801A_En_53_58 15/5/06, 2:52 PM56
Recording 06
57
En
One-touch Timer Recording (OTR)
RAM
VR mode
Video mode
DVD-R
VCR
The One-touch Timer Recording feature provides a
simple and convenient way to make a timed recording.
Note
•If you wish to watch the DVD playback during the
VCR OTR, press DVD/VCR to change to DVD mode
and perform the DVD playback. You can also
playback the VCR during DVD OTR.
Preparation:
•Turn ON the TV and set to the video input mode.
•Load a recordable DVD or video tape into the unit.
•Press DVD/VCR to select the appropriate mode.
Example:
One-touch Timer Recording for 30 minutes.
1Press REC MODE/SPEED to select the recording
mode.
For the recording mode, see step 1 on page 55.
2Set the TV/CABLE option to the appropriate
position (See page 32).
3Press numeric keys or CH +/– to select the
channel to be recorded.
4Press REC. Each additional press of REC will
increase recording time as shown in the chart
below, up to a maximum of 6 hours. The OTR and
recording time will appear on the screen for about
4 seconds.
TV - VHF/UHF channels
CABLE - CABLE TV channels
Press
once
twice
3 times
4 times
5 times
6 times
Recording time
NORMAL REC
OTR - : - -
OTR 0:30
OTR 1:00
OTR 1:30
OTR 2:00
Press
7 times
8 times
9 times
10 times
11 times
Recording time
OTR 3:00
OTR 4:00
OTR 5:00
OTR 6:00
NORMAL REC
To cancel OTR
Press STOP or turn off the power.
“ ” will appear on screen for about 4 seconds.
2J40801A_En_53_58 15/5/06, 2:52 PM57
Recording
06
58
En
VCR Plus+® programming system
RAM
VR mode
Video mode
DVD-R
VCR
What is the VCR Plus+ programming system?
VCR Plus+ system is a timer programming system
which simplifies timer recording programming. Instead
of entering the date, channel and recording time, you
simply enter a PlusCode® programming number that
you can find in your TV listings.
Checking the channel setup to use the VCR Plus+
system
Before you can use the VCR Plus+ system you need to
set up the channel mapping. This ensures that the VCR
Plus+ system uses the correct channels for recording by
matching up the preset channels in the recorder with
‘guide channels’. You can find these guide channel
numbers in your local TV guide or newspaper TV listings.
1Press SETUP and press or to select “CH
SETUP” and press ENTER.
The Channel Setup menu will appear.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
CH SETUP
TV/CABLE SELECT
AUTO CH MEMORY
ADD/DELETE
GUIDE CH SET
CABLE
PROCEED
PROCEED
PROCEED
SETUP MENU
ENTER
RETURNENTER BACK END
SELECT
SETUP
2Press or to select “GUIDE CH SET” and press
ENTER.
A window appears to set a guide channel number and
the corresponding tuner channel number.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
CH SETUP
TV/CABLE SELECT
AUTO CH MEMORY
ADD/DELETE
GUIDE CH SET
CABLE
PROCEED
PROCEED
PROCEED
SETUP MENU
ENTER RETURNENTER BACK END
SELECT
SETUP
INPUT NO.
0
-
9
GUIDE CH NO.
TUNER CH NO.
OK
---
001
3 Enter a GUIDE CH NO. (guide channel number).
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
CH SETUP
TV/CABLE SELECT
AUTO CH MEMORY
ADD/DELETE
GUIDE CH SET
CABLE
PROCEED
PROCEED
PROCEED
SETUP MENU
GUIDE CH NO.
TUNER CH NO.
OK
---
001
There are two ways to do this:
•To select numbers you can either use the number
buttons and then ENTER, or you can press ENTER
first then use the / buttons to select a number,
followed by ENTER.
•When using the number buttons, enter using three
digits—use leading zeros for numbers less than
100.
4Press to highlight TUNER CH. NO., then enter
the corresponding tuner channel number.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
CH SETUP
TV/CABLE SELECT
AUTO CH MEMORY
ADD/DELETE
GUIDE CH SET
CABLE
PROCEED
PROCEED
PROCEED
SETUP MENU
ENTER
RETURNENTER
CANCEL
DELETE
BACK END
SELECT
SETUP
INPUT NO.
0
-
9
GUIDE CH NO.
TUNER CH NO.
OK
001
---
•Select a tuner channel number in the same way as
you selected the guide channel number.
•You can also select one of the LINE inputs (LINE 1
or LINE 2) instead of a channel number if some
channels are received via an external receiver.
5Repeat steps 3 – 4 to input the rest of the
channel list.
6Press to highlight OK and press ENTER.
7When you’re done, press SETUP to exit.
2J40801A_En_53_58 5/15/06, 8:23 PM58
Recording 06
59
En
Setting the timer program using the VCR Plus+
system
The VCR Plus+ system simplifies timer recording so
that you just enter a PlusCode number (which you can
find in your TV listings guide) for the program you want
to record, tell the recorder whether you want to record it
just once or regularly, and then select the DVD or the
VCR for recording.
Note that for the VCR Plus+ system to work correctly,
the clock must be set to the right time and the guide
channels must be setup (see Checking the channel
setup to use the VCR Plus+ system above).
1Press VCR Plus+.
If a PROGRAM FULL message appears then you’ll need
to delete one of the existing timer programs before
continuing. Select a timer program from the list and
press CANCEL.
2Use the number buttons to enter the PlusCode
number.
RETURN
CANCEL
VCR
Plus+
DELETE
BACK END
SELECT INPUT NO.
0
-
9
VCR Plus+
PlusCode#
TYPE
OK
ONCE
1 - - - - - - - -
3Press to select “TYPE”.
ENTER
RETURN BACK
SELECT
ENTER
VCR Plus+
PlusCode#
TYPE
OK
ONCE
1 2 3 4 5 6 7 8 9
VCR
Plus+
END
OK
ONCE
DAILY
WEEKLY
Here you can set whether you want to record the
program ONCE, DAILY or WEEKLY. If you want to change
it, press ENTER then use the / buttons to select,
then press ENTER again.
4Press to highlight OK, then press ENTER.
ENTER
RETURN BACK
SELECT
ENTER
VCR Plus+
PlusCode#
TYPE
OK
ONCE
1 2 3 4 5 6 7 8 9
VCR
Plus+
END
If you’ve entered a valid PlusCode number, a summary
of the timer recording appears. You can edit any of this
information as necessary. Use the / buttons to
select the item you want to edit, press ENTER, then use
the / or / buttons as appropriate to select, then
press ENTER again.
ENTER
RETURN BACK END
SELECT
ENTER
TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
07
DVD
XP
OK
09/27(SA)
01:54AM
02:54AM
VCR Plus+
VCR
Plus+
•TYPE – select the frequency of the recording (more
options available here than in the previous screen,
such as every weekday)
•DATE (MM/DD) – the recording date
•START – recording start time
•END – recording end time
•CH – the channel to be recorded, or one of the
external inputs (L1 or L2)
•REC TO – record to the DVD or the VCR
•REC MODE – recording quality
•Note that If you haven’t set a guide channel for the
selected TV channel, the CH field will be blank (—).
In this case, set the channel number manually.
5Highlight OK and press ENTER.
The TIMER REC SET screen appears and you should see
the new timer recording in the list.
TIMER REC SET
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
DVD
MON-SAT
09/27(SA) 01:35 02:35 80 DVD EP
15:00 16:00 08 VCR SP
SUN 17:00 18:00 12 XP
09/27(SA) 01:54 02:54 07 DVD XP
6Press SETUP to exit.
2J40801A_En_59_64 15/5/06, 2:52 PM59
Recording
06
60
En
8 : 00 11 : 00
9 : 00 10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
•If a recordable tape is not inserted or no disc space
is available, the timer record indicator “ ” flashes,
and “TIMER RECORDING ERROR. PLEASE CHECK
THE DISC OR TAPE.” appears on the screen.
Replace the tape or disc to allow recording.
•If you perform any operation during timer record-
ing, the power will not go OFF when timer record-
ing finishes. To turn the power OFF, press
STANDBY/ON.
•From about 6 minutes before timer recording
starts, some operations cannot be done.
•If you set recording to start less than 6 minutes
ahead of time, the power will not turn OFF after
recording finishes.
•
If the recording media fills up during timer recording,
“ ” will flash and the power will not turn OFF.
Also, any timer recording scheduled for later is
cancelled.
•When the PROGRESSIVE indicator “ ” appears in
the display window (progressive scanning mode)
and the VCR mode is selected, you cannot display
the PlusCode input screen.
Switch to the DVD mode when entering PlusCode.
Timer recording
RAM
VR mode
Video mode
DVD-R
VCR
The timer recording system allows you to select the
date, time and channel and record the desired pro-
grams. Up to 12 timer programs within a month can be
stored in this unit.
Setting timer recording
Preparation:
•Turn ON the TV and set to the video input mode.
•Load a recordable DVD or video tape.
•Press DVD/VCR to select the appropriate mode.
•Confirm that the clock is indicating the correct
time.
Example:
Set the recording mode to LP; the TV program is on
channel 12 starting at 8:00 PM and stopping at 9:30 PM
on a date of 20th.
Note
•Recording starts a few seconds before the preset
starting time.
•You cannot use the timer recording for the both
DVD and VCR at the same time.
•The timer recording program is stopped during
timer recording, the stopped program is not erased
from the timer recording list. In this case, please
cancel the program, otherwise the stopped
program will be activated if the unit returns to timer
recording standby mode.
7 Press TIMER REC. In five minutes before your
Timer Recording starts, the CH will change to the
programmed CH automatically and the unit stand
by recording.
To extend the timer recording time
Press TIMER REC for 2 seconds while it is timer
recording. (You may also use normal recording or OTR).
Note
•If you press STANDBY/ON and it goes into the
STANDBY mode, if you then press TIMER REC, the
timer recording will end.
Checking or changing the timer recording
When you want to check the selected timer recording,
follow the steps 1 and 2 of “Setting timer recording” and
display the TIMER REC SET screen.
To change the timer recording, select the program to be
changed and press ENTER. The changing method is the
same as that for the recording a program for the first
time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press
CANCEL, then the selected program will be erased from
the timer recording list.
In case timer programs-overlap
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
In this case, the next recording time is delayed a
maximum of about 1 minute.
2J40801A_En_59_64 15/5/06, 2:52 PM60
Recording 06
61
En
4Press or to select “TYPE” and press ENTER.
Press or to select “ONCE” from the list and
press ENTER.
ENTER
RETURN BACK END
SELECT
SETUP
ENTER
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
01
DVD
SP
OK
11/19(WE)
03:17PM
04:17PM
ONCE
EVERY SUN
EVERY MON
EVERY TUE
EVERY WED
EVERY THU
EVERY FRI
EVERY SAT
MON-FRI
Note
•If you select timer recording on a specified date
only one time, select “ONCE” in the “TYPE” for
recording. You can record same days of every week
or from Monday to Friday using the item “TYPE”.
The items you can select are as follows:
ONCE: Recording on the selected “DATE”
EVERY SUN: Recording every Sun.
EVERY MON: Recording every Mon.
EVERY TUE: Recording every Tue.
EVERY WED: Recording every Wed.
EVERY THU: Recording every Thu.
EVERY FRI: Recording every Fri.
EVERY SAT: Recording every Sat.
MON-FRI: Recording from Mon. to Fri.
MON-SAT: Recording from Mon. to Sat.
EVERYDAY: Recording everyday.
5Press or to select “DATE” and press ENTER.
Press or to select the date to be recorded from
the list and press ENTER.
6Press or to select “START” and press ENTER.
Set the recording start time.
•To switch over the selection item (hour or minute),
press or , then press ENTER.
•Press or to adjust the time.
•After setting the time, press ENTER.
ENTER
RETURN BACK END
SELECT
SETUP
ENTER
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
01
DVD
SP
OK
11/20(TH)
03:17PM
04:17PM
08:17PM
SELECT
•The starting and stopping times for the recording
are displayed on the 12-hour (am/pm) clock. Twelve
o’clock midnight is displayed as “12:00AM ”,
whereas twelve o’clock noon is displayed as
“12:00PM”.
7Press or to select “END” and press ENTER.
Set the recording end time in the same manner as in
step 6.
8Press or to select “CH” and press ENTER.
•Press or to select the channel to be recorded.
•You can select the external input (L1 or L2) by
pressing or .
9Press or to select “REC TO” and press
ENTER.
Select the media (DVD or VCR) to be recorded from the
list and press ENTER.
•The initial setting of “REC TO” and “REC MODE” can be
changed using “Setting the recording”. (See page 31.)
1Press SETUP.
The SETUP MENU screen will appear.
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
SETUP MENU
2Press or to select “TIMER REC SET” and
press ENTER.
The TIMER REC SET screen will appear.
ENTER
RETURN BACK END
SELECT
SETUP
ENTER
TIMER REC SET
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
3Press or to select “NEW” and press ENTER.
The program screen will appear.
ENTER
RETURN BACK END
SELECT
SETUP
ENTER
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
01
DVD
SP
OK
11/19(WE)
03:17PM
04:17PM
2J40801A_En_59_64 15/5/06, 2:52 PM61
Recording
06
62
En
8 : 00 11 : 00
9 : 00 10 : 00
Program 1
Prog.1
Deleted Parts
Non Recorded Portion Parts
Prog.2 Prog.3
Program 2
Program 3
Recording
Control Settings
Checking or changing the timer recording
When you want to check the selected timer recording,
follow the steps 1 and 2 of “Setting timer recording” and
display the TIMER REC SET screen.
To change the timer recording, select the program to be
changed and press ENTER. The changing method is the
same as that for the recording a program for the first
time.
Cancelling the timer recording
Display the TIMER REC SET screen.
Select the program you want to cancel and press
CANCEL, then the selected program will be erased from
the timer recording list.
In case timer programs-overlap
Do not overlap timer programs as portions of the
conflicting programs will be lost. The first recording
time has priority over the next recording time as shown
in the diagram below.
In this case, the next recording time is delayed a
maximum of about 1 minute.
10 Press or to select “REC MODE” and press
ENTER.
The recording modes for the media selected in “REC
TO” item are listed.
Select the recording mode and press ENTER.
For the recording modes in VCR, see page 49. For the
recording modes in DVD, see page 53.
ENTER
RETURN BACK END
SELECT
SETUP
ENTER
SETUP MENU
DATE START END CH
REC
TO
REC
MODE
NEW
TYPE
DATE (MM/DD)
START
END
CH
REC TO
REC MODE
ONCE
12
DVD
SP
OK
11/20(TH)
08:00PM
09:30PM
LP
11 Select “OK” and press ENTER.
The timer program is determined and the TIMER REC
SET screen appears again.
12 When you enter the other program for the
timer recording, repeat the steps 3 to 11.
13 Press SETUP.
The TIMER REC SET screen disappears and the display
will return to the normal screen.
14 Press TIMER REC. In five minutes before your
Timer Recording starts, the CH will change to the
programmed CH automatically and the unit stand
by recording.
To extend the timer recording time
Press TIMER REC for 2 seconds while it is timer
recording. (You may also use normal recording or OTR).
Note
•If you press STANDBY/ON and it goes into the
STANDBY mode, if you then press TIMER REC, the
timer recording will end.
Note
•Recording starts a few seconds before the preset
starting time.
•You cannot use the timer recording for the both
DVD and VCR at the same time.
•The timer recording program is stopped during
timer recording, the stopped program is not erased
from the timer recording list. In this case, please
cancel the program, otherwise the stopped
program will be activated if the unit returns to timer
recording standby mode.
•If a recordable tape is not inserted or no disc space
is available, the timer record indicator “ ”
flashes, and “TIMER RECORDING ERROR. PLEASE
CHECK THE DISC OR TAPE.” appears on the
screen. Replace the tape or disc to allow recording.
•
If you perform any operation during timer recording
,
the power will not go OFF when timer recording
finishes. To turn the power OFF, press STANDBY/ON.
•From about 6 minutes before timer recording
starts, some operations cannot be done.
•If you set recording to start less than 6 minutes
ahead of time, the power will not turn OFF after
recording finishes.
•
If the recording media fills up during timer recording
,
“ ” will flash and the power will not turn OFF.
Also, any timer recording scheduled for later is
cancelled.
2J40801A_En_59_64 15/5/06, 2:52 PM62
Recording 06
63
En
Still playback:
Press PAUSE/STILL.
•To resume chase playback, press PLAY.
Fast forward/Review playback:
Press SEARCH /. Every press SEARCH, it
switches the speed of the search.
•To resume chase playback, press PLAY.
•If the playback position catches up to within about
60 seconds, chase playback resumes. It may differ
depending on the recording condition and search
speed.
Locating a chapter:
Press SKIP / to locate a chapter that you want to
watch.
•If you press SKIP () while playing back the
newest chapter, it starts playing back from about 15
seconds before the recording position.
Locating a specific scene:
Press PLAY MODE enables you to do a Time Search or
a Chapter Search. (See page 37.)
You can begin playback from the beginning of a
program currently being recorded. You will find this
function of great advantage on long programs, as
you do not have to wait for the end of recording to
begin playback.
Note
•Chase playback is not available when recording a
DVD-RW/R disc and video tape.
•Chase playback is not available when recording in
XP mode.
•Slow, Commercial skip, One touch replay, A-B
repeat, and Frame advance will not work during
chase playback.
•Chase playback does not work until 30 seconds of
recording have elapsed.
•If you press DISPLAY during chase playback, the
information screen is displayed (see page 35).
•Chase playback will stop when the recording ends.
•Chase playback will only function when a program
is being recorded.
1While recording a TV program onto the DVD-
RAM disc, press PLAY to start chase playback.
The TV program as it is being recorded will played back.
2Locate a scene you want through the following
operations if necessary.
3Press STOP to end chase playback. If you press
STOP again, the recording stops.
Chase Playback
RAM
2J40801A_En_59_64 15/5/06, 2:52 PM63
Recording
06
64
En
Stereo recording and playback
The VHS Hi-Fi audio system permits high fidelity
recording of MTS STEREO TV broadcasts.
Note
• When playing back a video tape or disc that is not
recorded in Hi-Fi stereo mode, the audio will
automatically be monaural.
•When listening to a Hi-Fi video tape, disc or MTS
broadcast through the RF OUT (UHF/VHF) jack
(Audio/Video cord not connected), the sound will
be monaural.
When a MTS STEREO broadcast is received, the word
“STEREO” will appear on the screen and the program
can be viewed or recorded in stereo.
The Hi-Fi STEREO recording procedure is the same as
for normal recordings.
Note
•When using a Cable TV system, stereo TV programs
may be transmitted over a mono Cable TV channel.
In this case the word “STEREO” will not appear and
the sound will be in mono.
Output selection for VCR
VCR
When viewing an MTS STEREO TV program, or playing a
prerecorded Hi-Fi STEREO on video tape, press AUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi STEREO position,
this button can be set to the MONO position if the
stereo audio is of poor quality. The “R” and “L” positions
allow the audio from the Right or Left Hi-Fi channel to
be heard over both TV speakers. This button has no
effect when viewing a monaural audio program. Each
time when you press the button, output selection
display appears on the screen for several seconds. Refer
to the chart below.
OUTPUT
SELECTION
STEREO
L ch
R ch
MONO
SOUND HEARD ON
BOTH SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Output selection for DVD
RAM
VR mode
Video mode
DVD-R
You can switch between the left or right channel and
stereo only when playing a disc on which a bilingual
broadcast was recorded in the DVD-RW VR mode. It is
not possible to switch between channels otherwise as
only the channel selected in the setting of SAP (Second
Audio Program; ON or OFF) is recorded in the DVD-RW
Video mode or DVD-R (see page 31).
Note
•When a stereo or monaural broadcast is recorded,
either stereo or monaural, respectively, is played
back and it is not possible to switch between
channels.
2J40801A_En_59_64 15/5/06, 2:52 PM64
Editing 07
65
En
Chapter 7
Editing
Editing the disc
This section explains how to edit the recorded contents
on DVD-RAMs and DVD-RWs. However, the items that
you can edit vary with the recording formats. In VR
mode, you can edit various title menus, whereas in
Video mode, you can edit only a few items.
Title menu
When the content is recorded, a title name that includes
the date, time, channel number and other information is
created automatically.
The title menu can be used when you playback after
confirming the contents (see page 34), or when you
check the contents recorded on the disc.
Original title
The titles explained above are called original titles; these
will be added with every recording. In VR mode you can
do various editing operations – renaming titles, adding
chapter marks, etc. In addition, you can erase the
unnecessary titles to increase the disc space.
Playlist
You can create a playlist based on the original titles.
You can combine or erase undesired scenes.
If you create a playlist, it will become the primary list
used by the disc.
If you create a playlist to customize your viewing
preferences, and choose to delete it, the original titles
will not be affected. It is recommended to create and
edit the playlist to prevent important titles from being
erased accidentally.
If you create a playlist, both the original title and playlist
will be displayed on the title menu.
Editable items
The items that can be edited are different between
original title and playlist. For the disc in Video mode,
only the title name can be edited.
The items can be edited in each are as follows:
If you finalize the disc in Video mode, the title list will be
created and you cannot use the title menu.
Note
•This unit cannot record or edit a disc which was
recorded or edited using another DVD recorder.
•You cannot edit or record the disc on which disc
protection is set. In such a case, be sure to cancel
the disc protection (see page 28) before starting the
operation.
•When a scene has been erased, the selected
position for erasing may vary slightly from the
actual erased position.
Editing items VR mode
Playback
Adding chapter mark
Combining chapters
Erasing scenes
Erasing titles
Renaming titles
Creating playlist
Combining titles
Original Playlist
Y
Y
Y
Y
Y
Y
Y
N
Y
N
N
Y
Y
Y
N
Y
Y
N
N
N
N
Y
N
N
Video mode
Original
2J40801A_En_65_73 15/5/06, 2:52 PM65
Editing
07
66
En
Creating a playlist
RAM
VR mode
1Press TITLE MENU.
The title menu will appear.
ENTER
RETURNPLAY BACK
SET
END
SELECT
TITLE
MENU
DISC NAME:————
Title 1
11/25/2006 10:03PM 011 SP
11/29/2006 11:30AM 009 SP
12/01/2006 06:52PM 006 XP
11/23/2006 08:41AM 006 EP
REC DATE :11/23/2006
TIME :08:41AM
LENGTH :00:30:17
CHANNEL :006
REC MODE :EP
TITLE MENU
2Press or to select the original title which
will be used as the base of a playlist.
3Press .
The editing menu of original title will appear.
4Press or to select “NEW PLAYLIST”.
ENTER
RETURNENTER BACK
SET
END
SELECT
TITLE
MENU
DISC NAME:————
Title 1
11/25/2006 10:03PM 011 SP
11/29/2006 11:30AM 009 SP
12/01/2006 06:52PM 006 XP
11/23/2006 08:41AM 006 EP
REC DATE :11/23/2006
TIME : 08:41AM
LENGTH : 00:01:17
TITLE MENU
PLAY
ADD CHAPTER MARK
COMBINE CHAPTERS
EDIT TITLE
DELETE TITLE
RENAME TITLE
NEW PLAYLIST
NEW PLAYLIST
5Press ENTER.
The editing menu closes and the created playlist
appears at the bottom of the list.
ENTER
RETURNPLAY BACK
SET
END
SELECT
TITLE
MENU
DISC NAME:————
Title 1
11/25/2006 10:03PM 011 SP
11/29/2006 11:30AM 009 SP
12/01/2006 06:52PM 006 XP
11/23/2006 08:41AM 006 EP PL
11/23/2006 08:41AM 006 EP
REC DATE :11/23/2006
TIME :08:41AM
LENGTH :00:30:17
CHANNEL :006
REC MODE :EP
TITLE MENU
Created playlist
Editing a playlist
RAM
VR mode
You can create and edit the playlist based on the
original title.
Note
•A playlist can only be created with a DVD-RAM or a
DVD-RW in VR mode. You cannot create a playlist
with a DVD-RW in Video mode, nor with a DVD-R.
•In case the disc includes more than 9 titles, you
can turn to the next or the previous page. (See page
34.)
•You cannot switch to the VCR mode when the title
menu is showing. Press TITLE MENU to clear the
title menu, then press DVD/VCR to switch to the
VCR mode.
Preparation:
•Turn ON the TV and set to the video input mode.
•Load the recorded DVD-RAM/RW (VR).
•Press DVD/VCR to select the DVD mode. (The DVD
indicator will light.)
2J40801A_En_65_73 15/5/06, 2:52 PM66
Editing 07
67
En
Changing a title name
RAM
VR mode
1Press TITLE MENU to display the title menu.
2Select the playlist where you want to change
the title name.
• Press or to select the playlist.
• Press to display the editing menu of the
playlist.
• Press or to select “RENAME TITLE”.
ENTER
RETURNENTER BACK
SET
END
SELECT
TITLE
MENU
DISC NAME:————
11/23/2006 08:41AM 006 EP
11/25/2006 10:03PM 011 SP
11/29/2006 11:30AM 009 SP
12/01/2006 06:52PM 006 XP
11/23/2006 08:41AM 006 EP PL
REC DATE :11/23/2006
TIME :08:41AM
LENGTH :00:30:17
CHANNEL :006
REC MODE :EP
TITLE MENU
PLAY
EDIT TITLE
DELETE TITLE
RENAME TITLE
TITLE COMBINE
RENAME TITLE
3Press ENTER.
The keyboard screen will appear.
4Use the keyboard screen to enter the title name.
Family
1
( .< > #
2
a b c
3
d e f
CANCEL
Back
RETURN
Exit
STOP
Caps
0
Space bar
4
g h i
5
j k l
6
m n o
7
qp r s
8
t u v
9
w x y z
DISPLAY
OK
DISPLAY
OK
Numbers
Signs
Letters
5Press DISPLAY to return to the title menu.
ENTER
RETURNPLAY BACK
SET
END
SELECT
TITLE
MENU
DISC NAME:————
11/23/2006 08:41AM 006 EP
11/25/2006 10:03PM 011 SP
11/29/2006 11:30AM 009 SP
12/01/2006 06:52PM 006 XP
Family
REC DATE :11/23/2006
TIME :08:41AM
LENGTH :00:30:17
CHANNEL :006
REC MODE :EP
TITLE MENU
Note
•The title name can be a maximum of 64 characters.
Long names will be shortened in the title menu.
•For using the keyboard screen, see “Using the
keyboard screen” (page 78).
2J40801A_En_65_73 15/5/06, 2:52 PM67