ORION ELECTRIC M4C9H Video Cassette Recorder User Manual Manual
ORION ELECTRIC CO., LTD. Video Cassette Recorder Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 101544 |
| Application ID | T0CjiIhCxZP77JaoQRrw2A== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 66.67kB (833339 bits) |
| Date Submitted | 2000-05-23 00:00:00 |
| Date Available | 2000-06-07 00:00:00 |
| Creation Date | 1999-10-04 13:03:33 |
| Producing Software | Acrobat Distiller 3.0 for Macintosh |
| Document Lastmod | 2000-04-14 08:25:36 |
| Document Title | Manual |
ENGLISH
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALI-
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage within the
product's enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
FIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try correcting the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC
Rules could void the user's authority to operate this equipment.
4C93401A-E(C-09)
04.10.99, 12:17
1.
READ INSTRUCTIONS
All the safety and operating instructions should be read before the unit is operated.
2.
RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
HEED WARNINGS
All warnings on the unit and in the operating instructions should be adhered to.
3.
4.
5.
6.
7.
8.
ENGLISH
IMPORTANT SAFEGUARDS
FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
CLEANING
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
ATTACHMENTS
Do not use attachments not recommended by the unit's manufacturer as they may cause hazards.
WATER AND MOISTURE
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool.
PORTABLE CART WARNING
ACCESSORIES
(symbol provided by RETAC)
Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may
fall, causing serious injury, and serious damage to the unit. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive
force, and uneven surfaces may cause the appliance and cart combination to overturn.
S3125A
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The
openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit
should never be placed near or over a radiator or heat source. This unit should not be placed in built-in installations such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have
been adhered to.
10. POWER SOURCES
This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For units
intended to operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug If your unit is equipped with a
3-wire grounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type
power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.
4C93401A-E(C-09)
04.10.99, 12:17
IMPORTANT SAFEGUARDS
(CONTINUED)
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.
13. LIGHTNING
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit
due to lightning and power line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be
fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Do not push objects through any openings in this unit as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded
so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National
Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
18. SERVICING
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. DAMAGE REQUIRING SERVICE
Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those
controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the
unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.
20. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock or other hazards.
4C93401A-E(C-09)
04.10.99, 12:17
determine that the unit is in proper operating condition.
22. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
23. HEAT
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER THE
NATIONAL ELECTRICAL CODE
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
NEC-NATIONAL ELECTRICAL CODE
S2898A
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
4C93401A-E(C-09)
04.10.99, 12:17
ENGLISH
21. SAFETY CHECK
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
FEATURES
High Quality Picture Technology - This video cassette recorder marked "HQ" incorporates VHS high quality
technology. A built-in detail enhancer is used to boost the recorded signal and provide maximum picture
quality in playback. It is compatible with other VHS video cassette recorders.
Frequency Synthesized Tuning - Quartz locked direct access tuner automatically locks in each channel for
perfect reception.
4 Video Heads - Provides optimal picture quality for special effects playback.
Hi-Fi Stereo Sound - With a frequency response of 20 to 20,000 Hz and a dynamic range of better than 90dB,
this VCR provides a level of excellence that rivals compact discs.
Full Load Tape Transport - Permits rapid access between modes.
8-Program/1-Month Programmable Timer with Everyday/Every Week Capability - The built-in timer allows
automatic absentee recording of up to 8 TV programs within 1month. It is also possible to record a program
which is broadcast at the same time everyday or every week.
On-Screen Display and Programming - When you select a channel or make other changes, the TV will show
an indicator on the screen for a few seconds. Clock settings, timer setting and other set-up operations can be
carried out using the on-screen display menu system.
Digital Auto Tracking - Automatically adjusts tracking during playback for the best possible picture.
181 Channel Tuner - Receives standard VHF and UHF broadcast channels and up to 113 cable channels.
One-Touch Timer Recording (OTR) - Simply by pressing the REC/OTR button, the VCR can be programmed
for up to 5 hours of recording with an immediate start.
Automatic Power On - When loading a cassette tape, this VCR will automatically turn on.
Automatic Playback - When loading a cassette tape without the erase prevention tab, this VCR will
automatically turn on and play back the cassette tape at the correct speed.
Automatic Rewind-Stop-Eject-Power Off - When a tape reaches its end during playback and recording, it will
automatically stop, rewind, stop, eject the tape and the VCR will turn off.
Automatic Repeat Play System - When the AUTO REPEAT option is turned on, this VCR will automatically
play back the same cassette tape repeatedly.
On-Screen 3 Language Display - You can select one of 3 languages; English, Spanish or French, for onscreen programming.
Variable Speed Slow Motion - This VCR provides Variable speed slow motion which offers steady, noise free
playback at 1/5-1/30 normal speed.
Frame by Frame Advance - Press the SLOW button during still playback to advance the tape one frame at a
time.
Skip Search - When the SKIP SEARCH button is pressed during playback, the TV/VCR will automatically
search forward in 30 second increments to amaximum of 3 minutes with each press of the SKIP SEARCH
button, and then return to normal playback.
Real Time Tape Counter with Zero Return - The counter displays real tape time and the zero return function
can be used to return the tape to a preselected position (00:00:00) while the counter can be used to locate
programs.
TV Monitor - When the TV MONI. (Monitor) button on the remote control is pressed during playback, the TV
channel selected on the VCR can be viewed.
Channel Skip - An unwanted channel can be deleted when using the CHANNEL ▲ or ▼ button.
Fluorescent Multi-Function Display - Selected functions are immediately indicated on the display.
2 Speed Picture Search - 3 or 5 times normal speed in SP mode (7X or 9X in LP and 9X or 15X in SLP).
3 Speed Record/Playback - Records and plays three tape speeds (SP, LP, SLP).
Stereo/SAP Reception - This VCR is designed to receive stereo and separate audio program (SAP)
broadcasts where available.
Auto Head Cleaning System - Cleans the video heads automatically when a cassette tape is loaded and
ejected.
4C93401A-E(C-09)
04.10.99, 12:17
TABLE OF CONTENTS
ENGLISH
We recommend that you carefully read the descriptions and operating procedures contained in this Owner's
Manual prior to operating your new VCR.
PRECAUTIONS
PRECAUTIONS ....................................................................................................................................................... 8
LOCATION OF CONTROLS .................................................................................................................................. 10
REMOTE CONTROL ............................................................................................................................................. 12
BASIC CONNECTIONS ......................................................................................................................................... 14
CATV (CABLE TV) CONNECTIONS ..................................................................................................................... 18
AUDIO/VIDEO CONNECTIONS ............................................................................................................................ 22
SETTING THE VIDEO CHANNEL ......................................................................................................................... 23
ON-SCREEN LANGUAGE SELECTION ............................................................................................................... 24
SETTING THE CLOCK .......................................................................................................................................... 25
SETTING THE CHANNELS ................................................................................................................................... 26
NOISE ELIMINATION (BLUE SCREEN) ............................................................................................................... 29
PLAYBACK
LOADING AND UNLOADING VIDEO CASSETTE TAPES ......................................................................................30
PLAYBACK ............................................................................................................................................................ 31
SPECIAL PLAYBACK ............................................................................................................................................ 33
RECORDING
RECORDING A TV PROGRAM ............................................................................................................................. 36
ONE TOUCH TIMER RECORDING (OTR) ........................................................................................................... 39
SETTING THE TIMER RECORDING .................................................................................................................... 40
ADDITIONAL INFORMATION
ON-SCREEN FUNCTION DISPLAY ......................................................................................................................
USING ZERO RETURN .........................................................................................................................................
VIDEO INDEX SEARCH SYSTEM (INDEX) ..........................................................................................................
STEREO RECORDING AND PLAYBACK .............................................................................................................
SEPARATE AUDIO PROGRAM (SAP) .................................................................................................................
DUPLICATING A VIDEO TAPE .............................................................................................................................
VIDEO HEAD CLEANING ......................................................................................................................................
BEFORE REQUESTING SERVICE .......................................................................................................................
SPECIFICATIONS .................................................................................................................................................
43
44
45
46
47
48
49
50
52
4C93401A-E(C-09)
04.10.99, 12:17
PRECAUTIONS
MOISTURE CONDENSATION
DO NOT OPERATE THIS VCR FOR AT LEAST TWO OR THREE HOURS WHEN MOISTURE IN THE AIR
CONDENSES ON THE VCR.
WHAT IS MOISTURE CONDENSATION?
When a cold liquid is poured into a glass, for example, water vapor in the air will condense on the surface of the
glass. This is called moisture condensation.
MOISTURE WILL CONDENSE ON THE UNIT IN THE FOLLOWING CASES;
• When you move this VCR from a cold to a warm place.
• After heating a cold room or under extremely humid conditions.
WHEN YOU EXPERIENCE THE ABOVE CONDITIONS,
Plug the power cord into an AC outlet, set the power switch to ON and leave the unit at room temperature until
moisture condensation disappears.
Depending on the surrounding conditions, this may take two or three hours.
Head Drum
Video Tape
If you cause a static discharge when touching the
VCR, and the VCR fails to function, simply unplug the
unit from the wall outlet, wait a few minutes and plug
it back in. The VCR should return to normal operation.
Avoid extreme heat.
Do not place the VCR on or near appliances which
may cause electromagnetic interference, e.g. TV,
speakers, etc. Doing so may cause erratic operation
of the VCR including picture and/or sound distortion
or noise.
Avoid extreme cold.
104°F
(40°C)
(5°C)
41°F
4C93401A-E(C-09)
04.10.99, 12:18
The ventilation holes prevent overheating. Do not
block or cover these holes. Especially avoid covering
the holes with soft materials such as cloth or paper.
Do not insert fingers or any other objects into the
cassette loading slot. Do not spray cleaner or wax
directly on the VCR or use forced air to remove dust.
Avoid places subject to strong vibration. Use in a
horizontal (flat) position only.
Keep the VCR away from flower vases, sinks, etc.
If liquids should be spilled into the VCR, serious
damage will result. If you spill any liquids into the
VCR, unplug the AC power cord immediately and
consult qualified service personnel before attempting
to use the VCR again.
When you finish operating the VCR, always unload
the cassette and turn off the power.
When you leave your home for a long time, unplug
the AC power cord.
To protect the VCR from a lightning storm, unplug
the AC power cord from the wall outlet and
disconnect the antenna.
POWER SOURCE
AC Outlet
Wider Hole
and Blade
Polarized AC Cord Plug
(One blade is wider than the other.)
4C93401A-E(C-09)
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the
AC cord plug into a standard 120V 60Hz polarized AC outlet.
NOTES:
1. Never connect the AC line cord plug to other than the specified
voltage (120V 60Hz). Use the attached power cord only.
2. If the polarized AC cord does not fit into a non-polarized AC
outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
3. If you cause a static discharge when touching the unit, and the
unit fails to function, simply unplug the unit, from the AC outlet,
wait a few minutes, and plug it back in. The unit should return to
normal operation.
04.10.99, 12:18
ENGLISH
Avoid extreme moisture and dust.
LOCATION OF CONTROLS
FRONT
POWER
PLAY
F.FWD
REW
STOP/EJECT
VIDEO IN
MONO
AUDIO IN
CHANNEL
REC/OTR
10
DESCRIPTION OF CONTROLS
1. Cassette Loading Slot - To insert or remove a
video tape.
2. REW button - In the STOP mode, this button rapidly
winds the tape backwards. In the PLAY mode, this
button activates Reverse Search.
3. PLAY button - Press to play a prerecorded tape.
4. F. FWD button - In the STOP mode, this button
rapidly winds the tape forward. In the PLAY mode,
this button activates Forward Search.
7. STOP/EJECT button - Press once to stop the tape
in any mode. Press again (on the VCR) to eject
the tape.
8. CHANNEL ▲ / ▼ buttons - Used to select a
channel for viewing or recording.
9. Remote Sensor - Signals from the Remote Control
are received here.
10. AUDIO (L/R)/VIDEO IN Jacks - Audio (L/R) and
video signal cables from an external source can be
connected here.
5. POWER button - Turns the VCR power on and off.
6. REC/OTR button - Press once to start normal
recording. Additional presses activate One Touch
Recording.
10
4C93401A-E(P10-19)
10
04.10.99, 12:16
One Touch Timer
Recording
POWER indicator
VCR
OTR
Timer Record
ENGLISH
FLUORESCENT DISPLAY
VCR
ATR
APM
SLP
ATR (Auto Tracking)
AM/PM
Tape Speed
Multi-Function Display
LOCATION OF CONNECTORS
REAR
UHF/VHF
OUT
IN(ANT)
VIDEO
AUDIO
CH
3 4
OUT(TV)
DESCRIPTION OF CONTROLS
1. AUDIO (L/R)/VIDEO OUT Jacks - Used to output
audio (L/R) and video signals to a TV, amplifier or
VCR.
4. 3/4 Channel Selector Switch - Selects the channel
through which the VCR outputs its signal to a TV.
5. AC Power Cord - Connect to a 120V 60Hz outlet.
2. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
3. VHF/UHF OUT (TV) Jack - Used to output VHF/
UHF or CATV signals to a TV.
11
4C93401A-E(P10-19)
11
04.10.99, 12:16
REMOTE CONTROL
9. INDEX button - Used to search for the INDEX mark.
10. INPUT SELECT button - Switches the program for
viewing between the VCR and external input
POWER TIMER REC TV MONI. EJECT
17
sources.
11. SLOW button - Press to play back a tape in slow
CHANNEL
motion or to advance the tape one frame at a time
18
during still playback.
12. SLOW – button - Press to speed down slow motion
19
playback until it is 1/30 of normal speed playback.
13. SLOW + button - Press to speed up slow motion
CALL
TV/VCR
20
playback until it is 1/5 of normal speed playback.
21
14. PAUSE/STILL button - During recording, this
MENU
button temporarily stops the tape. During playback, it
22
AUTO
TRACKING
stops the tape and displays a still image on the TV
CLOCK/ COUNT ZERO
23
SET
COUNTER RESET RETURN
screen.
24
SELECT
15. REW button - In the STOP mode, this button
INDEX INPUT AUDIO ENTER CANCEL
25
rapidly winds the tape backwards. In the PLAY
SKIP
SLOW
SLOW
SPEED SEARCH
10
mode, this button activates Reverse Search.
26
11
PAUSE/STILL
STOP
REC/OTR
16. TV MONI. (Monitor) button - Used to temporarily
27
12
view a TV channel selected on the VCR while in the
PLAY
F.FWD
REW
13
playback mode.
28
14
17. EJECT button - Press to eject the tape.
29
18. CHANNEL ▲ / ▼ buttons - Used to select a
15
channel for viewing or recording.
30
19. TV/VCR selector button - Switches between TV
and VCR.
20. MENU button - Press to display the on-screen menu
function.
21. ZERO RETURN button - Used to stop the tape
when the counter reaches "00:00:00".
22. SET +/– buttons - Used to set or adjust in the menu
mode.
23. ENTER button - Used to enter information in the
DESCRIPTION OF BUTTONS
menu mode.
1. TIMER REC button - Used to set the VCR to start
24. CANCEL button - Used to clear the selected timer
recording at a preset time.
recording program and to move the cursor backward
2. POWER button - Turns the VCR power on and off.
for correction.
3. Direct Channel Selection buttons (0-9) - Allow
25. SPEED (SP/LP/SLP) selector button - Sets
direct access to any channel.
the tape speed for recording.
4. CALL button - Displays the status of the unit on the
26. SKIP SEARCH button - Press in the playback mode
TV screen.
to search forward through approximately 30 seconds
5. DIGITAL AUTO/MANUAL TRACKING buttons of tape.
Allow automatic or manual adjustment of tracking to
27. REC/OTR button - Press once to start normal
minimize picture noise during playback.
recording. Additional presses activate One-touch
6. COUNT RESET button - Resets the Real Time
Timer Recording.
Counter to "00:00:00".
28. STOP button - Press once to stop the tape.
7. CLOCK/COUNTER selector button - Switches
29. F. FWD button - In the STOP mode, this button
between the clock and the real time tape counter.
rapidly winds the tape forward. In the PLAY mode,
8. AUDIO SELECT button - Switches sound between
this button activates Forward Search.
mono and stereo, and SAP when receiveing
30. PLAY button - Press to play a prerecorded tape.
broadcasts in stereo or SAP.
16
12
4C93401A-E(P10-19)
12
04.10.99, 12:16
1
Open the battery compartment cover.
Install two "AAA" (penlight
size) batteries.
ENGLISH
BATTERY INSTALLATION
Replace the cover.
BATTERY CAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh
ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer's directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
30˚ 30˚
NOTE:
•
•
15 FEET
When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
Remote Sensor, the remote operation may be unstable.
When there is an obstacle between the VCR and the transmitter, the remote control transmitter may not
operate.
13
4C93401A-E(P10-19)
13
04.10.99, 12:16
BASIC CONNECTIONS
If you are using an antenna system, follow the instructions on pages 14-17. If you are a cable (CATV) subscriber,
skip ahead to page 18 for the proper connections.
ANTENNA TO VCR CONNECTION
The VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect
it to the VCR. Then connect the VCR to the TV. Below are 3 common methods of connecting an antenna system to a
VCR. Find the type of antenna system you are using and follow the connection diagram. After you have connected the
antenna to the VCR, follow the instructions on pages 16-17 to connect the VCR to the TV.
COMBINATION VHF/UHF ANTENNA WITH 75 OHM COAXIAL CABLE
75 OHM COAXIAL CABLE
COMBINATION VHF/UHF ANTENNA WITH 300 OHM TWIN LEAD (FLAT) WIRE
300 OHM TWIN LEAD (FLAT) WIRE
SEPARATE VHF AND UHF ANTENNAS
UHF
VHF
300 OHM TWIN LEAD (FLAT) WIRE
75 OHM COAXIAL CABLE
NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm
inputs and one 75 ohm output.
NOTE:
•
•
14
•
A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to
the VCR properly.
For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an
outdoor type antenna is required.
If you are not sure about the connection, please refer to qualified service personnel.
4C93401A-E(P10-19)
14
04.10.99, 12:16
ENGLISH
This VCR has a single 75 ohm antenna input for connection to an antenna (VHF/UHF) or cable (CATV) system.
If you have separate VHF and UHF antennas (number 3 below), use a combiner to connect the antennas to
the VCR.
VCR
NOTE: IF A VHF OR UHF
ANTENNA IS USED, SET THE TV/
IN
CATV MENU OPTION TO THE
"TV" MODE.
OUT
VCR
MATCHING TRANSFORMER
300 OHM INPUT
75 OHM OUTPUT
(NOT SUPPLIED)
IN
NOTE: IF A VHF OR UHF
ANTENNA IS USED, SET THE TV/
CATV MENU OPTION TO THE
"TV" MODE.
OUT
VCR
COMBINER
75/300 OHM INPUTS
75 OHM OUTPUT
(NOT SUPPLIED)
IN
NOTE: IF A VHF OR UHF
ANTENNA IS USED, SET THE TV/
CATV MENU OPTION TO THE
"TV" MODE.
OUT
15
4C93401A-E(P10-19)
15
04.10.99, 12:16
BASIC CONNECTIONS
(CONTINUED)
VCR TO TV CONNECTION
After you have connected the antenna to the VCR (see pages 14 & 15), you must connect the VCR to the TV.
Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow
the connection diagram.
IN
OUT
75 OHM COAXIAL CABLE (SUPPLIED)
VCR
IN
OUT
75 OHM COAXIAL CABLE (SUPPLIED)
VCR
IN
OUT
75 OHM COAXIAL CABLE (SUPPLIED)
VCR
16
4C93401A-E(P10-19)
16
04.10.99, 12:16
ENGLISH
This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna
inputs (numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception.
TV
VHF/UHF IN
NOTE: IF A VHF OR UHF
ANTENNA IS USED, SET
THE TV/CATV MENU
OPTION TO THE "TV"
MODE.
TV with single 75 ohm
VHF/UHF antenna input
SPLITTER
75 OHM INPUT
75/300 OHM OUTPUTS
(NOT SUPPLIED)
UHF
NOTE: IF A VHF OR UHF
ANTENNA IS USED, SET
THE TV/CATV MENU
VHF
OPTION TO THE "TV"
MODE.
TV
TV with 300 ohm UHF
and 75 ohm VHF
antenna inputs
TV
SPLITTER
75 OHM INPUT
300 OHM OUTPUTS
(NOT SUPPLIED)
UHF
NOTE: IF A VHF OR UHF
ANTENNA IS USED, SET
THE TV/CATV MENU
OPTION TO THE "TV"
MODE.
VHF
TV with 300 ohm UHF
and 300 ohm VHF
antenna inputs
17
4C93401A-E(P10-19)
17
04.10.99, 12:16
CATV (CABLE TV) CONNECTIONS
Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This VCR has
an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except
for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a
descrambler box for proper reception.
IMPORTANT: MAKE SURE THE TV/CATV MENU OPTION IS SET TO THE "CATV" MODE.
VCR
INCOMING CABLE
VHF/UHF
IN
OUT
IMPORTANT: MAKE SURE THE TV/CATV MENU OPTION IS SET TO THE "CATV" MODE.
VCR
CONVERTER/DESCRAMBLER
VHF/UHF
IN
INCOMING CABLE
OUT
IMPORTANT: MAKE SURE THE TV/CATV MENU OPTION IS SET TO THE "CATV" MODE.
VCR
VHF/UHF
IN
INCOMING CABLE
CONVERTER/DESCRAMBLER
OUT
NOTE: WHENEVER A CONVERTER/DESCRAMBLER BOX IS PLACED BEFORE THE VCR, YOU MUST TUNE
THE VCR TO THE OUTPUT OF THE CONVERTER/DESCRAMBLER BOX, USUALLY CHANNEL 3 OR 4.
18
4C93401A-E(P10-19)
18
04.10.99, 12:17
TV
For basic cable service, no premium (scrambled) channels.
ALLOWS:
* Recording of nonscrambled channels.
* Use of the programmable timer.
* Recording of one channel while watching another.
VHF/UHF IN
TV
VHF/UHF IN
ALLOWS:
* Recording of channels through the converter box (scrambled and
unscrambled).
* Using the programmable timer to record only the channel selected
at the converter box.
PREVENTS:
* Recording one channel while watching another.
* Using the VCR tuner to select channels.
NOTE:
To record from converter/descrambler, VCR tuner must be tuned to the
converter output channel, usually channel 3 or 4.
TV
VHF/UHF IN
ALLOWS:
* Recording of unscrambled channels
* Using the programmable timer.
* Recording an unscrambled channel while watching any channel
selected at the converter box.
PREVENTS:
* Recording scrambled channels.
NOTE:
If you are playing a tape or using the tuner built into the VCR, the
converter must be set to the video channel output of the VCR (either 3
or 4).
19
4C93401A-E(P10-19)
19
04.10.99, 12:17
ENGLISH
This VCR cannot receive scrambled programs since it does not contain a descrambler. In order to receive scrambled programs,
your existing descrambler must be used. Descrambler boxes are available from cable companies. Consult your local cable
company for more information concerning connection to their descrambler equipment. There are many ways to connect your VCR
to a cable system. Below are six common methods of connection.
CATV (CABLE TV) CONNECTIONS
(CONTINUED)
IMPORTANT: MAKE SURE THE TV/CATV MENU OPTION IS SET TO THE "CATV" MODE.
VCR
SPLITTER
VHF/UHF
IN
INCOMING CABLE
OUT
CONVERTER/DESCRAMBLER
IMPORTANT: MAKE SURE THE TV/CATV MENU OPTION IS SET TO THE "CATV" MODE.
VCR
SPLITTER
VHF/UHF
IN
INCOMING CABLE
OUT
CONVERTER/DESCRAMBLER
IMPORTANT: MAKE SURE THE TV/CATV MENU OPTION IS SET TO THE "CATV" MODE.
VCR
SPLITTER
CONVERTER/
DESCRAMBLER
VHF/UHF
IN
OUT
INCOMING CABLE
CONVERTER/DESCRAMBLER
NOTE: WHENEVER A CONVERTER/DESCRAMBLER BOX IS PLACED BEFORE THE VCR, YOU MUST TUNE
THE VCR TO THE OUTPUT OF THE CONVERTER/DESCRAMBLER BOX, USUALLY CHANNEL 3 OR 4.
20
4C93401A-E(P20-29)
20
04.10.99, 12:15
A/B SWITCH
VHF/UHF IN
ALLOWS:
* Recording of nonscrambled channels.
* Recording of one channel while watching another.
* Watching premium channels through the converter while recording
nonscrambled channels.
* Using the programmable timer.
PREVENTS:
* Recording scrambled channels.
TV
A/B SWITCH
ENGLISH
ALLOWS:
* Recording of all channels through the converter box.
* Recording of one channel while watching another.
* Using the programmable timer to record only the channel
selected at the converter box.
PREVENTS:
* Watching scrambled channels while recording another channel.
* Using the VCR tuner to select channels.
NOTE:
To record from converter/descrambler, VCR tuner must be tuned to
the converter output channel, usually channel 3 or 4.
TV
VHF/UHF IN
ALLOWS:
* Recording of all channels through the converter box.
* Recording a scrambled or unscrambled channel while watching
another (scrambled or unscrambled) channel.
* Using the programmable timer to record only the channel selected
at the converter box.
PREVENTS:
* Using the VCR tuner to select channels.
NOTE:
To record from converter/descrambler, VCR tuner must be tuned to
the converter output channel, usually channel 3 or 4.
TV
A/B SWITCH
VHF/UHF IN
YOU MUST TUNE
CHANNEL 3 OR 4.
21
4C93401A-E(P20-29)
21
04.10.99, 12:15
AUDIO/VIDEO CONNECTIONS
If your TV has AUDIO IN and VIDEO IN jacks, you can connect your VCR to them to receive a higher quality
picture and sound. If you have a stereo, you can connect a stereo amplifier to enjoy powerful sound.
AUDIO/VIDEO CONNECTION
TO VHF/UHF IN
VCR
TV
IN
TO VIDEO OUT
OUT
TO AUDIO (L) OUT
TO AUDIO (R) OUT
TO VHF/UHF
OUT
TO ANT IN
TO AUDIO (R) IN
TO VIDEO IN
TO AUDIO (L) IN
AUDIO/VIDEO Cord (Not supplied)
1. Connect the VIDEO OUT jack on the VCR to the VIDEO IN jack on the TV.
2. Connect the AUDIO (L/R) OUT jacks on the VCR to the AUDIO (L/R) IN jacks on the TV.
3. Set the VIDEO/TV selector of your TV to "VIDEO".
STEREO AMPLIFIER CONNECTIONS
When you connect your VCR to a Stereo Component System, you can view the picture from the VCR while
enjoying powerful sound from your audio system.
TO VHF/UHF IN
VIDEO Cord
(Not supplied)
VCR
TO VIDEO IN
TV
TO ANT IN
TO VIDEO OUT
IN
TO AUDIO (L) OUT
OUT
TO AUDIO (R) OUT
TO VHF/UHF
OUT
TO AUX (L) IN
TO AUX (R) IN
AUDIO Cord (Not supplied)
Connect the AUDIO (L/R) OUT jacks on the VCR to the AUX (L/R) jacks on the stereo amplifier.
22
4C93401A-E(P20-29)
22
04.10.99, 12:15
SETTING THE VIDEO CHANNEL
When a TV is connected with an antenna cable only.
Turn ON the VCR POWER
button.
Set the 3/4 Channel
selector switch (Rear of the
VCR) to CH 3 or 4.
Turn ON the TV and set to
CH 3 or 4 to correspond
with the channel selected
in 2 .
CH
3 4
POWER
3 4
OR
ER
PO
TIM
ER
RE
NI.
EJ
EC
CH
AN
NE
AU
TO
TV
/VC
RO N
ZE TU
T RE
UN ET
T IO
CO ES
C UD
/ R
LE A
CK R
S T
O TE
CL N
IN
CO
IN
TR
AC
MO
LL
CA
TV
KI
SL
OW
PA
US
E/
RE
ST
ILL
SL
OW
NG
TE
ST
NU
CA
PL
RE
C/
/F.
OT
IP CH
SKAR
SE
AY
NC
OP
ME
SE
EN
EL
FW
Press the TV/VCR selector button to select the
VCR position.
Select any channel to receive a TV station in
your area.
125
CHCH125
CHANNEL
TV/VCR
The VCR indicator will light in the display.
The channel number will appear on the screen and
display about 4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4
channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color
picture from the video cassette recorder. Refer to your TV owner's manual for details.
23
4C93401A-E(P20-29)
23
04.10.99, 12:15
ENGLISH
To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV
must be set to channel 3 or 4 (video channel).
ON-SCREEN LANGUAGE SELECTION
This VCR can display on the TV screen in the English, Spanish or French languages.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
Press the MENU button.
Press the SET + or – button to select the
LANGUAGE option, then press the ENTER
button.
MENU
– SET +
ENTER
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
PO
WE
TI
ER
RE
TV
NI
EJ
EC
LL
CA
AN
NE
CR
/V
TV
IN
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
IN
ET ERO
PU
UR
AU
DIO
SL
SE
OW
EN
TE
ST
CA
SP
OP
NC
EE
EL
DS S
EA KIP
RC
RE
C/
OT
/F.
FW
CH
AU
ST
ILL
PL
AY
LE
E/
RE
OW
US
1 3
SL
PA
Press the SET + or – button to select the desired
language: English, Spanish or French.
– SET +
ME
NU
Press the MENU button 2 times.
MENU
LANGUAGE/IDIOMA/LANGUE
ENGLISH
ESPAÑOL
FRANCAIS
〈+/–/ENTER/MENU〉
24
4C93401A-E(P20-29)
24
04.10.99, 12:15
EXAMPLE: Setting the clock to "8:30 AM" March, 23 (THU), 2000.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR mode.
Press the MENU button. Press the SET + or –
button to select the CLOCK SET option, then
press the ENTER button.
– SET +
MENU
ENTER
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video input
mode on the TV.
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
PO
WE
AU
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
IN
ET ERO
PU
UR
IN
OW
ILL
T IO
C UD
LE A
SL
ST
EC
ST
NE
ME
EE
CA
NC
RE
C/
/F.
OT
IP CH
SKAR
SE
AY
NU
SP
PL
EL
1 2 3
FW
Press the SET + or – button to set the month,
then press the ENTER button.
– SET +
AN
SE
EN
TE
OP
EJ
CH
/VC
E/
NI.
TV
US
MO
OW
PA
RE
TV
LL
SL
RE
CA
TIM
ER
ENTER
Set the day, year and time as in Step 2.
• The day of the week will automatically appear
when you set the year.
• Press and hold down the button to increase/
decrease the minute by 10.
• Auto date and time start functioning when
you finish setting.
– SET +
ENTER
MONTH
MONTH
DAY
1 (WED)
DAY
YEAR
TIME
2000
YEAR
12 : 00 AM
TIME
〈+/–/ENTER/CANCEL/MENU〉
23 (THU)
2000
8 : 30 AM
〈+/–/ENTER/CANCEL/MENU〉
NOTE: • After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the
present time.
• Press the CANCEL button to move cursor backward for correction.
• If you want to corret time or date while the clock is functioning, press the MENU button, then press
SET + or – button to select the CLOCK SET option, then press the ENTER button.
To make any adjustments perform steps 2 through 3.
4C93401A-E(P20-29)
25
04.10.99, 12:15
25
ENGLISH
SETTING THE CLOCK
SETTING THE CHANNELS
This VCR is equipped with a channel memory feature which allows channels to skip up or down to the next
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed
into the VCR’s memory. In addition to normal VHF and UHF channels, this VCR can receive up to 113 Cable TV
channels. To use this VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the
factory, this menu option is in the CATV mode.
TV/CATV SELECTION
Press the MENU button.
Press the SET + or – button to select the
CH SET UP option, then press the ENTER button.
– SET +
ENTER
MENU
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
PO
WE
TIM
ER
RE
NI.
EJ
EC
AN
NE
TV
/VC
E/
US
ST
ILL
PL
AY
LE
PA
RE
OW
SL
IN
AU
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
ER
IN
PU
UR O
AU
DIO
SL
SE
OW
EN
TE
ST
CA
OP
PE
NC
ED
EL
SE SK
AR IP
RE
CH
C/
OT
/F.
FW
MO
CH
LL
CA
TV
Press the SET + or – button
to select the TV/CATV mode.
– SET +
ME
1 5
NU
Press the ENTER button to
select the TV or CATV mode.
The arrow indicates the
selected mode.
Press the MENU button
twice to return to normal TV
viewing.
MENU
ENTER
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
TV - VHF/UHF channels
CATV - CABLE TV channels
〈+/–/ENTER/MENU〉
26
4C93401A-E(P20-29)
26
04.10.99, 12:15
AUTOMATIC MEMORY TUNING
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR
mode.
Press the MENU button.
Press the SET + or – button to select the CH
SET UP option, then press the ENTER button.
MENU
– SET +
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video
input mode on the TV.
ENTER
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
PO
WE
TI
ER
RE
TV
NI
EJ
EC
AN
LL
CA
NE
CR
/V
TV
TO
ST
ILL
PL
AY
LE
E/
OW
US
SL
PA
RE
IN
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
IN
ET ERO
PU
UR
AU
DIO
SL
SE
OW
EN
TE
ST
CA
OP
PE
NC
ED
EL
SE SK
AR IP
RE
CH
C/
OT
/F.
FW
CH
AU
Press the SET + or – button to select the AUTO
CH MEMORY mode, then press the ENTER
button.
– SET +
ME
NU
1 2
The auto tuning will start. The channel display
will count up and when finished, the screen
returns to normal.
ENTER
CH SET UP
001
CHCH001
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈+/–/ENTER/MENU〉
27
4C93401A-E(P20-29)
27
04.10.99, 12:15
ENGLISH
The VCR can receive a maximum of 181 channels by presetting the channels into memory.
SETTING THE CHANNELS
(CONTINUED)
TO ADD/DELETE CHANNELS
Press the MENU button.
Press the SET + or – button to
select the CH SET UP option,
then press the ENTER button.
MENU
– SET +
Press the SET + or – button
to select the ADD/DELETE
mode, then press the
ENTER button.
– SET +
ENTER
Select the desired channels
to be memorized or deleted
using the SET + or – button.
ENTER
– SET +
CH SET UP
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈+/–/ENTER/MENU〉
PO
WE
AU
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
ER
IN
TU O
PU
RN
T IO
C UD
LE A
E/
SL
ST
OW
ILL
EJ
EC
NE
1 5
ME
ST
SP
EE
CA
NC
AY
RE
C/
/F.
OT
IP CH
SKAR
SE
PL
NU
SE
EN
TE
OP
EL
1 2
FW
Press the ENTER button if you wish to DELETE
the channel from memory.
Press the ENTER button if you wish to ADD the
unmemorized channel.
Repeat Steps 3 and 4 for each channel to be added or
deleted.
Press the MENU button three times after adding
or deleting all of the desired channels, to return
to normal TV viewing.
MENU
ENTER
ADD
CH 002
〈+/–/ENTER/MENU〉
28
4C93401A-E(P20-29)
28
AN
/VC
US
NI.
CH
TV
OW
PA
RE
MO
IN
SL
TV
LL
RE
CA
TIM
ER
04.10.99, 12:15
NOISE ELIMINATION (BLUE SCREEN)
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the
VCR mode.
Press the MENU button, then press the SET + or
– button to select the NO NOISE BACKGROUND
option.
MENU
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
– SET +
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
ER
PO
TIM
ER
RE
NI.
EJ
EC
AN
CH
NE
AU
TO
TV
/VC
RO N
ZE TU
T RE
UN ET
T IO
CO ES
C UD
/ R
LE A
CK R
S T
O TE
CL N
IN
CO
IN
TR
AC
MO
LL
CA
TV
KI
SL
OW
PA
US
E/
RE
ST
ILL
SL
OW
NG
ME
NU
SE
EN
TE
ST
CA
NC
OP
PL
RE
C/
/F.
IP CH
SKAR
SE
AY
OT
EL
FW
Press the ENTER button to select the ON position.
ENTER
1 3
Press the MENU button again.
MENU
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
29
4C93401A-E(P20-29)
29
04.10.99, 12:15
ENGLISH
When you don't want to receive a weak signal broadcast, the Blue back screen can be obtained by selecting
the NO NOISE BACKGROUND "ON". When the unit is shipped from the factory, the NO NOISE
BACKGROUND is set to the "ON".
LOADING AND UNLOADING VIDEO CASSETTE TAPES
Use only video cassette tapes marked
LOADING
Push the center of the tape until it is automatically retracted.
AUTOMATIC POWER ON
The VCR will turn on automatically and the POWER indicator will light.
AUTOMATIC PLAY
When loading a cassette tape without the erase prevention tab, playback will start immediately.
Insert the cassette with its labeled side facing you.
An inverted cassette cannot be inserted.
The clock display will change to the counter display.
UNLOADING
To unload a cassette, press the EJECT button on
the remote control, or press the STOP/EJECT
button on the VCR twice. The first press will stop
the tape in any mode. The second press will eject
the tape. The " " will appear on the screen.
The EJECT indicator will light in the display.
Pull the cassette out.
EJECT
Stop/Eject
OR
AUTOMATIC EJECT
If the VCR automatically rewinds the tape to the
beginning (AUTO REWIND FEATURE), the tape will
be ejected automatically (See the NOTE on page 37).
NOTE:
The counter display will change to the clock display.
• Always eject the tape when not in use.
• The cassette can be ejected even if the POWER switch is "OFF".
30
4C93401A-E(P30-37)
30
04.10.99, 12:13
PLAYBACK
To play a prerecorded cassette tape.
TO START PLAYBACK
CHECK BEFORE YOU BEGIN
Turn ON the TV and set to the video channel 3 or 4.
Load a prerecorded tape. (When loading a
cassette tape without the erase prevention tab,
playback will start automatically.)
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
The clock display will change in the counter display.
ER
PO
TIM
ER
RE
NI.
EJ
EC
CH
AN
NE
AU
TO
TV
/VC
RO N
ZE TU
T RE
UN ET
T IO
CO ES
C UD
/ R
LE A
CK R
S T
O TE
CL N
IN
CO
IN
TR
AC
MO
LL
CA
TV
KI
SL
OW
PA
US
E/
RE
ST
ILL
SL
OW
NG
ME
NU
SE
EN
TE
ST
CA
NC
OP
PL
RE
C/
/F.
OT
IP CH
SKAR
SE
AY
EL
FW
TO STOP PLAYBACK
Press the PLAY button. Playback will start.
PLAY
Press the STOP button once. The tape will stop but
remain fully loaded and ready to play.
STOP
The " " will appear on the screen about 4 seconds.
The PLAY indicator will light in the display about 4 second.
The " " will appear on the screen about 4 seconds.
The STOP indicator will light in the display about 4 second.
31
4C93401A-E(P30-37)
31
04.10.99, 12:13
ENGLISH
TAPES
PLAYBACK
(CONTINUED)
TO REWIND OR FORWARD THE TAPE RAPIDLY
Press the REW button in the STOP mode.
Press the F.FWD button in the STOP mode.
REW/
/F.FWD
The "
" will appear on the screen and display about
4 seconds.
The REW indicator will light in the display about 4 second.
The "
" will appear on the screen and display about
4 seconds.
The F.FWD indicator will light in the display about 4 second.
ER
PO
TI
ER
RE
TV
NI
EJ
EC
LL
CA
CR
/V
TV
IN
RO RN
TE
ZE TU
TR
T RE
UN ET
TO
CO ES
/ R
LE
CK R
S T
O TE
CL UN
IN
CO
LO
IN
LL
TI
/S
DI
LO
AU
TO
TR
/O
LA
SE SK
AR IP
CH
.F
/F
DIGITAL TRACKING CONTROL
TO MONITOR A TV PROGRAM
When a tape is played, the Digital Auto Tracking System automatically
adjusts the tracking to obtain the best possible picture. If noise bars
appear during playback, adjust the tracking manually:
• Press the Manual TRACKING ▲ or ▼ button to obtain the best
possible picture. To resume automatic tracking, press the AUTO
Tracking button.
AUTO
TRACKING
AUTO
TRACKING
Press the TV MONI.(Monitor) button
while in the playback mode. The
video tape will continue to play while
the picture switches to the TV
channel selected on the TV channel
selected on the VCR. Press the
button to return to the playback
picture.
TV MONI.
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape program during REW (F.FWD) mode, press and hold the REW (F.FWD) button again.
The backward (forward) visual search picture will be seen on the screen. Release to return to the REW (F.FWD)
mode.
32
4C93401A-E(P30-37)
32
04.10.99, 12:13
SPECIAL PLAYBACK
When either the F.FWD or REW button is pressed in the PLAYBACK mode, the speed search picture will appear.
When pressed twice, the search picture will increase speed. Speed search time depends upon the speed used
(SP, LP or SLP) during recording. To rewind or fast forward a tape, press the STOP button, and then press the REW
or F.FWD button.
To visually search forward, press the F.FWD button
once or twice in the PLAYBACK mode.
To visually search backward, press the REW button
once or twice in the PLAYBACK mode.
REW/
/F.FWD
The REVEW indicator will light in the display about
The CUE indicator will light in the display about
4 seconds.
4 seconds.
Press the PLAY button to resume normal viewing speed. Press the PLAY button to resume normal viewing speed.
PO
WE
TIM
ER
RE
MO
NI.
EJ
EC
LL
CA
TV
TV
TO
/VC
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
TR Z
ET ERO
UR
AU
DI
TE
LL
TI
LO
/S
LE
S T
LO
IN
TR
/O
LA
TO
SE SK
AR IP
CH
.F
/F
SKIP SEARCH
Press the SKIP SEARCH button in the PLAY mode. The VCR will search forward through approximately 30
seconds of the tape (e.g. unwanted commercial time) for each press of the SKIP SEARCH button (maximum
six presses) and then resume normal playback. The number of presses will appear on the display in place of
the channel number.
For example: 1 press: 30 seconds of tape
SKIP
2 presses: 60 seconds of tape
SEARCH
3 presses: 90 seconds of tape
The CUE 1 indicator will light in the
display. (For example : 1 press.)
NOTE:
• Best results during speed search playback can be obtained with cassette tapes recorded in the "SLP" mode.
• A few noise bars will appear on the picture during SPEED SEARCH and STILL.
• The audio output is muted during special playback.
• To prevent damage to the tape, special playback is automatically changed to the PLAYBACK mode after 5 minutes.
33
33
4C93401A-E(P30-37)
33
04.10.99, 12:13
ENGLISH
TO VISUALLY SEARCH FOR DESIRED POINTS
SPECIAL PLAYBACK
(CONTINUED)
TO WATCH A STILL PICTURE
FRAME BY FRAME ADVANCE
Press the PAUSE/STILL button in the PLAYBACK
mode.
Press the SLOW button during STILL playback.
SLOW
PAUSE/STILL
The still picture will advance by one frame each time
you press the button. Hold the button for continuous
frame by frame viewing.
Press the PAUSE/STILL button or PLAY button to
resume normal playback.
The STILL indicator will light in the display about
4 seconds.
Press the PAUSE/STILL button or PLAY button to
resume normal playback.
PO
WE
TIM
ER
RE
MO
NI.
EJ
EC
LL
CA
TV
TV
TO
/VC
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
TR Z
IN
ET ERO
PU
UR
AU
DIO
TE
LL
TI
LO
/S
LE
LO
TR
/O
LA
DS S
EA KIP
RC
EE
TO
SP
.F
/F
SLOW MOTION PLAYBACK
Press the SLOW button in the PLAYBACK mode. Playback will proceed at 1/10th of the normal speed.
Slow motion speed can be changed by using SLOW + or – button.
+ ... Press to speed up slow motion playback up to 1/5 normal playback speed.
– ... Press to speed down slow motion playback down to 1/30 normal playback speed.
SLOW
– SLOW +
The SLOW indicator will light in the display about 4 seconds.
Press the PLAY button again to resume normal playback.
NOTE: SLOW TRACKING AND VERTICAL LOCK ADJUSTMENT
If noise bars appear in the picture during slow motion, press the Manual TRACKING ▲ or ▼ button to reduce
the noise bars.
If the still picture jitters excessively, press the Manual TRACKING ▲ or ▼ button to stabilize the still picture.
34
4C93401A-E(P30-37)
34
04.10.99, 12:13
1
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the VCR mode.
Press the MENU button.
Then press the SET + or – button to select the
AUTO REPEAT option.
– SET +
MENU
When a TV is connected with an audio/video cable,
turn the TV and this VCR on, and select the video
input mode on the TV.
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
ER
PO
MO
NI.
EJ
EC
TV
LL
RE
CA
TIM
ER
TV
TO
/VC
1 3
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
TR Z
ET ERO
UR
AU
DIO
TE
LL
TI
LO
/S
LE
S T
LO
IN
TR
/O
LA
TO
SE SK
AR IP
CH
.F
/F
Press the ENTER button to select the ON
position.
ENTER
Press the MENU button.
If you press the PLAY button, the tape will play
over and over until the repeat mode is canceled.
MENU
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
" will appear when you press the CALL button.
NOTE: To cancel repeat mode, follow the above steps 1 and 2, then press the ENTER button to select the OFF
position. Press the MENU button to return to the TV.
35
4C93401A-E(P30-37)
35
04.10.99, 12:13
ENGLISH
TO WATCH A TAPE REPEATEDLY
RECORDING A TV PROGRAM
RECORDING AND VIEWING THE SAME TV PROGRAM
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the video channel 3 or 4.
• Turn ON the VCR POWER button.
• Press the TV/VCR selector button to select the
VCR mode.
Load a cassette tape with the erase
prevention tab intact.
The VCR will automatically turn on.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
The clock display will change in the counter display.
VHF/UHF/CATV CHANNELS
CATV
TV
VHF
VHF
2-13
2-13
STD/HRC/IRC
UHF
14-36
14-69
(A) (W)
37-59
(AA) (WW)
60-85
(AAA) (ZZZ)
86-94
(86) (94)
95-99
(A-5) (A-1)
100-125
(100)(125)
01
(5A)
ER
PO
ER
TI
RE
TV
NI
EC
EJ
LL
CA
CH
AN
NE
AU
TV
TO
CR
AC
/V
RO N
ZE TU
T RE
UN ET
T IO
CO ES
C UD
/ R
LE A
CK R
S T
O TE
CL N
IN
CO
IN
TR
KI
SL
OW
PA
US
E/
RE
ST
ILL
SL
OW
NG
ME
NU
SE
EN
TE
ST
CA
NC
OP
PL
RE
C/
/F.
OT
IP CH
SKAR
SE
AY
EL
FW
Press the SPEED selector button to select the
desired tape speed SP, LP or SLP.
SPEED
Press the direct channel selection buttons to
select the channel to be recorded.
1-9
Press 0 twice and then 1-9 as required.
(Example; to select 2, press 002.)
10-19
Press 0 first and then the remaining 2
digits in order from left to right.
(Example; press 018 for 18.)
20-99
Press 2 digits in order. (Example; press
22 for 22.)
100-125 Press the 3 digits in order. (Example;
press 110 for 110.)
CH 110
00 : 00 : 00 SP
The counter and SP, LP or SLP will appear on the
screen about 4 seconds.
Or press the CHANNEL ▲ or ▼ button to select the
channel to be recorded.
NOTE: Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make
a recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.
36
4C93401A-E(P30-37)
36
04.10.99, 12:14
4
Press the REC/OTR button.
" " will appear on the screen about 4
seconds.
Press the STOP button to stop recording. "
appear on screen about 4 seconds.
" will
STOP
REC/OTR
CH 110
The STOP indicator will light in the display about
4 seconds.
PO
WE
TIM
ER
RE
MO
NI.
EJ
EC
LL
CA
TV
TV
TO
/VC
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
TR Z
ET ERO
UR
AU
DIO
TE
LL
TI
LO
/S
LE
S T
LO
IN
TR
/O
LA
TO
SE SK
AR IP
CH
.F
/F
TO STOP RECORDING TEMPORARILY
Press the PAUSE/STILL button to avoid recording unwanted material. Press again to continue the recording.
" will appear on screen about 4 seconds and the REC indicator will light in the display to continue
pause mode.
PAUSE/STILL
NOTE: The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The
VCR will change to the STOP mode.
NOTE: AUTO REWIND FEATURE
This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also
eject the tape and turn the VCR’s power OFF.
37
4C93401A-E(P30-37)
37
04.10.99, 12:14
ENGLISH
TO STOP RECORDING
RECORDING A TV PROGRAM
(CONTINUED)
RECORDING ONE PROGRAM WHILE WATCHING ANOTHER
While the VCR is recording, press the TV/VCR
selector button to select the TV position.
The TV/VCR indicator will go off and recording
will continue.
Select the TV channel you want to watch by
using the TV channel selector.
TV/VCR
NOTE: Some CATV hookups do not permit viewing one channel while recording another. See pages 18-21.
TO PREVENT AN ACCIDENTAL RECORDING
After recording, break off the erase prevention
tab if you do not wish to record over the tape.
TO RECORD AGAIN
Cover the hole with adhesive tape.
Be careful the tape does not extend past the edges
of the cassette housing.
Erase prevention tab
Adhesive tape
TAPE SPEED AND MAXIMUM RECORDING/PLAYBACK TIME
VIDEO CASSETTE TAPE
TAPE SPEED
T-210
SP
(Standard Play)
LP
(Long Play)
T-160
3-1/2 hours
7 hours
SLP
(Super Long Play) 10-1/2 hours
T-120
T-90
T-60
T-30
2-2/3 hours
2 hours
1-1/2 hours
1 hour
30 minutes
5-1/3 hours
4 hours
3 hours
2 hours
1 hour
8 hours
6 hours
4-1/2 hours
3 hours
1-1/2 hours
38
4C93401A-E(P30-37)
38
04.10.99, 12:14
ONE-TOUCH TIMER RECORDING (OTR)
EXAMPLE: One-touch timer recording for 30 minutes.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the
video channel 3 or 4.
• Turn on the VCR power button.
Load a cassette tape with the
erase prevention tab intact.
Press the SPEED selector
button to select the desired
tape speed SP, LP or SLP.
The counter and SP, LP or SLP
will appear on the screen about 4
seconds.
When a TV is connected with an
audio/video cable, turn the TV on
and select the video input mode on
the TV.
SPEED
The clock display will change in the
counter display.
00 : 00 : 00 SP
PO
WE
TIM
ER
RE
NI.
EJ
EC
LL
MO
CA
TV
TV
TO
/VC
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
TR Z
ET ERO
UR
AU
DIO
TE
LL
TI
LO
/S
LE
S T
LO
IN
TR
/O
LA
TO
SE SK
AR IP
CH
.F
/F
Press the CHANNEL ▲ or ▼ button to select
the channel to be recorded.
CHANNEL
CH 125
Press the REC/OTR button to begin recording.
Press the button again to stop recording after
30 minutes. Each additional press of the REC/
OTR button will increase recording time as shown in
the chart below, up to a maximum of 5 hours. The
OTR and recording time will appear on screen about
4 seconds.
REC/OTR
OTR 0 : 30
CH 125
The channel number will appear on the screen and
display about 4 seconds.
NOTE:
• Press the REC/OTR button to increase the time needed for recording. (See the chart below.)
Press
once
Recording time NORMAL REC
twice
0:30
3 times
1:00
4 times
1:30
5 times
2:00
6 times
3:00
7 times
4:00
• To cancel OTR, press the STOP button or turn off the power.
4C93401A-E(P38-43)
39
8 times
5:00
9 times
NORMAL REC
39
04.10.99, 12:12
ENGLISH
The one-touch timer recording feature provides a simple and convenient way to make a timed recording.
SETTING THE TIMER RECORDING
Timer recording can be programmed on-screen with the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1 month.
EXAMPLE: Program a timer recording for the 26th day, channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1. (Tape speed: SLP)
CHECK BEFORE YOU BEGIN
• Turn on the TV and set to the video channel 3 or 4.
• Press the TV/VCR selector button to select the VCR
Press the MENU button. Check the TIMER REC
SET option is selected, then press the ENTER
button.
MENU
mode.
• Load a video cassette with the erase prevention tab
intact. The VCR will automatically turn on.
• Check that the clock and date are correct (see page
25).
ENTER
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video
input mode on the TV.
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
PO
WE
TIM
ER
RE
MO
NI.
EJ
EC
LL
CA
TV
TV
TO
/VC
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
TR Z
ET ERO
UR
AU
DI
TE
LL
TI
LO
/S
LE
S T
LO
IN
TR
/O
LA
TO
SE SK
AR IP
CH
.F
/F
2 3
Press the SET + or – button to select the
PROGRAM, then press the ENTER button.
– SET +
-----------------------------------------
Press the SET + or – button to select the date,
then press the ENTER button.
– SET +
ENTER
DATE
START
END
-:--:--:--:--:--:--:--:--
-:--:--:--:--:--:--:--:--
ENTER
CH
-----------------
〈+/–/ENTER/CANCEL/MENU〉
DATE START END
26(SU) 12:34AM -:--
------------------------------------
40
-:--:--:--:--:--:--:--
CH
-----------------
〈+/-/ENTER/CANCEL/MENU〉
40
4C93401A-E(P38-43)
-:--:--:--:--:--:--:--
04.10.99, 12:12
5
Set the start time, end time, channel and tape
speed as in step 3.
– SET +
To enter other programmes, repeat step 2
through 4. Or, press the MENU button twice to
return to the normal screen.
ENTER
DATE START END CH
26(SU) 11:00PM 11:30PM 125 SLP
------------------------------------
-:--:--:--:--:--:--:--
-:--:--:--:--:--:--:--
MENU
DATE START END CH
26(SU) 11:00PM 11:30PM 125 SLP
------------------------------------
---------------
-:--:--:--:--:--:--:--
-:--:--:--:--:--:--:--
---------------
〈+/-/ENTER/CANCEL/MENU〉
〈+/-/ENTER/CANCEL/MENU〉
ER
PO
ER
TI
NI
EC
EJ
LL
CA
TV
RE
CH
AN
NE
AU
TV
TO
CR
AC
/V
RO N
ZE TU
T RE
UN ET
CO ES
/ R
LE
CK R
S T
O TE
CL N
IN
CO
IN
TR
KI
SL
OW
PA
US
E/
RE
NU
SE
EN
TE
ST
CA
OP
PL
AY
RE
C/
/F.
FW
OT
SE SK
AR IP
CH
ME
DI
OW
ILL
AU
SL
ST
NG
NC
EL
TO CORRECT THE SETTINGS
Press the TIMER REC button. The power will
go off, the Timer Record indicator will light and
the VCR stands by for recording.
While setting, press the CANCEL button repeatedly until
the item to be corrected will flash then re-enter the
setting with the SET + or – button.
When finished, press the ENTER button.
TIMER REC
To cancel timer recoreding, press TIMER REC button
again and the Timer Record indicator will go out.
NOTE:
•
•
•
The VCR cannot be used while the Timer Record indicator is lit.
After a power failure or disconnection of the power plug, all programmed recording settings must be reset
upon resumption of power. In this case, reset the clock (see page 25) and reprogram any timer recordings.
To record from external source set the channel to "L". "L" will appear next to ch 125 (or 69).
4C93401A-E(P38-43)
41
41
04.10.99, 12:12
ENGLISH
SETTING THE TIMER RECORDING
TO SET DAILY/WEEKLY TIMER
TO CONFIRM THE SETTINGS
When setting the date in step 3, press the SET –
button repeatedly when the current day is displayed.
The setting changes as follows:
Example
The current day (Friday)
(CONTINUED)
Press the SET + or – button to select the TIMER REC
SET option in the MENU.
Then press the ENTER button to display the timer
program list.
Press the MENU button twice to return to the normal
screen.
SU-SA (Sunday to Saturday)
MO-SA (Monday to Saturday)
One month later
minus one day
WKL-WE
(Weekly Wednesday)
MO-FR (Monday to Friday)
DATE START END CH
26(SU) 11:00PM 11:30PM 125 SLP
------------------------------------
WKL-TH (Weekly Thursday)
-:--:--:--:--:--:--:--
-:--:--:--:--:--:--:--
---------------
〈+/-/ENTER/CANCEL/MENU〉
ER
PO
LL
MO
NI.
EJ
EC
CH
AN
NE
TV
/VC
LE
US
OW
PA
E/
RE
SL
IN
AU
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
IN
ET ERO
PU
UR
AU
DIO
SL
SE
OW
EN
TE
ST
CA
SP
OP
NC
EE
EL
DS S
EA KIP
RC
RE
C/
OT
/F.
FW
TV
RE
CA
TIM
ER
ST
ILL
PL
AY
ME
NU
IF THE PROGRAM OVERLAPS ANOTHER
TO CANCEL A PROGRAM
Press the SET + or – button to select the TIMER
REC SET option in the MENU.
Then press the SET + or – button to select the
unnecessary program, and press the CANCEL button
to cancel the program.
NOTE: Do not overlap programs as portions of the
conflicting programs will be lost. The first
recording time has priority over the next
recording time as shown in the diagram.
8 : 00
CANCEL
9 : 00
10 : 00
11 : 00
Program 1
DATE
-----------------------------------------
START
END
-:--:--:--:--:--:--:--:--
-:--:--:--:--:--:--:--:--
CH
-----------------
〈+/–/ENTER/CANCEL/MENU〉
NOTE:
Program 2
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Control Settings
Prog.1
Prog.2
Prog.3
• The everyday/every week recording can be made continuously until the recording is canceled or the tape
reaches the end.
• During timer recording, the automatic rewinding mechanism does not function.
42
4C93401A-E(P38-43)
42
04.10.99, 12:12
ON–SCREEN FUNCTION DISPLAY
Press the CALL button.
ENGLISH
WHILE WATCHING TV
DAY OF THE WEEK
CALL
CLOCK
8 : 30 AM THU
STEREO SAP
CH 125
CHANNEL
STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)
00 : 00 : 00 SP
Press the CALL button again to make the display disappear.
TAPE SPEED
REAL TIME COUNTER
WHILE OPERATING A TAPE
Press the CALL button.
OPERATING MODE
CALL
8 : 30 AM THU
STEREO SAP
CH 125
TAPE IN
00 : 00 : 00 SP
Press the CALL button again to make the display disappear.
TO SET THE COUNTER TO '00:00:00'
Press the COUNT RESET button. The counter will appear on the screen.
COUNT
RESET
00 : 00 : 00 SP
NOTE:
•
•
•
If you rewind the tape from "00:00:00", a minus sign ("–") will be displayed in front of the time.
When you load a tape, the counter will change to "00:00:00".
The counter does not function on nonrecorded (blank) sections of the tape. When you rewind, fast forward
or play tapes through blank sections, the counter stops.
43
4C93401A-E(P44-47)
43
04.10.99, 12:11
USING ZERO RETURN
The zero return function provides a convenient method of rapidly returning to the starting point of recording
or playback. The starting point can be indexed for any location on the tape by pressing the COUNT RESET
button and ZERO RETURN button.
Press the CALL button to display the counter on
the screen. (When loading a cassette tape, the
clock will change to the counter automatically in the
display.)
Before playback or recording, press the
COUNT RESET button to set the counter to
"00:00:00".
COUNT
RESET
CALL
CH125
8:30 AM THU
8:30 AM THU
00 : 00 : 00 SP
00 : 30 : 50 SP
PO
WE
T IO
C UD
LE A
SL
ST
OW
ILL
ST
ME
EE
CA
NC
RE
C/
/F.
OT
IP CH
SKAR
SE
AY
NU
SP
PL
EL
Begin playback or recording.
PLAY
REC/OTR
NE
FW
EC
AN
SE
EN
TE
OP
EJ
CH
/VC
NI.
TV
RE
MO
OW
E/
TV
AU
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
IN
ET RO
PU
UR
IN
SL
US
RE
LL
TIM
ER
CA
PA
CH125
Press the STOP button when
playback or recording is
finished.
STOP
Press the ZERO RETURN
button.
The tape will rewind and
automatically stop at the
"00:00:00" position.
OR
ZERO
RETURN
8:30 AM THU
CH125
00 : 00 : 00 SP
8:30 AM THU
CH125
00 : 00 : 00 SP
9:00 AM THU
CH125
9:00 AM THU
00 : 30 : 00 SP
00 : 30 : 00 SP
44
4C93401A-E(P44-47)
44
CH125
04.10.99, 12:11
VIDEO INDEX SEARCH SYSTEM (INDEX)
The VIDEO INDEX SEARCH SYSTEM (INDEX) enables you to locate the beginning of any recording made on the
VCR. The Index Search function automatically records an INDEX mark on the tape whenever a recording is
initiated. This mark can easily be located by using the F.FWD and REW buttons.
Press the INDEX button during playback or
stop mode.
ENGLISH
SEARCHING FOR AN INDEX MARK
Select the number of INDEX marks to be
skipped (up to 9) with the Channel Number
keys.
INDEX
EXAMPLE: When the tape has four separate recorded
Programmes, select 4 to go to the beginning of the 4th
programme (4th index mark).
INDEX 1
〈1-9/
/INDEX〉
ER
PO
TV
MO
NI.
EJ
EC
LL
RE
CA
TIM
ER
TV
TO
/VC
IN
IN
TR
CO CLO
UN CK
TE /
R CO
RE UN
SE T
RE ZER
TU O
RN
AU
DI
TE
LL
TI
LO
/S
LE
S T
LO
IN
TR
/O
LA
TO
SE SK
AR IP
CH
.F
/F
Press the F.FWD or REW button. The VCR will
skip over the selected number of INDEX marks,
the VCR will resume normal playback at the
selected mark.
REW/
/F.FWD
OR
NOTE: • When you recorded an INDEX mark at the very beginning of the tape, the mark may not be found.
• During INDEX search, the tape may stop and begin to play at a slightly different location.
• INDEX may not function properly with old or worn out video tapes.
45
4C93401A-E(P44-47)
45
04.10.99, 12:11
STEREO RECORDING AND PLAYBACK
RECORDING STEREO BROADCASTS
The VHS Hi-Fi audio system permits high fidelity recording of MTS STEREO TV broadcasts.
When a MTS STEREO broadcast is received, the STEREO will appear on the screen and the program can be
viewed or recorded in stereo (refer to pages 36 and 37 for recording procedures). The Hi-Fi STEREO recording
procedure is the same as for normal recordings.
STEREO
NOTE: When using a CATV system, stereo TV programs may be transmitted over a mono cable channel.
In this case the STEREO will not appear and the sound will be in mono.
PO
WE
SL
ST
OW
ILL
T IO
C UD
LE A
EJ
EC
CH
AN
NE
/VC
ME
RE
NI.
TV
OW
E/
MO
IN
SL
US
AU
TO
CO CLO
TR
UN CK
AC
TE /
KI
R CO
NG
RE UN
SE T
TR Z
IN
ET RO
PU
UR
TV
LL
PA
RE
CA
TIM
ER
TE
ST
SP
OP
EE
CA
AY
RE
C/
/F.
OT
IP CH
SKAR
SE
PL
NU
SE
EN
NC
EL
FW
OUTPUT SELECTION
When viewing an MTS STEREO TV program, or playing a prerecorded VHS Hi-Fi STEREO videotape, press
this button to select that the audio be heard through both speakers. Normally set to the Hi-Fi STEREO position,
this button can be set to the MONO position if the stereo broadcast or videotape audio is of poor quality. The “R”
and “L” positions allow the audio from the Right or Left Hi-Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONO videotape or TV program. Each time when you press the button,
OUTPUT SELECTION display appears on the screen for several seconds. Refer to the chart below.
SELECT
AUDIO
OUTPUT
SELECTION
STEREO
L CH
R CH
MONO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
NOTE: • When playing back a tape that is not recorded in Hi-Fi stereo mode, the audio will automatically be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast through the VHF/UHF jack (Audio/Video cord
not connected), the sound will be monaural.
46
4C93401A-E(P44-47)
46
04.10.99, 12:11
Your VCR is fitted with an SAP broadcast system which enables you to switch to a SEPARATE AUDIO
PROGRAM when viewing a selected channel.
This function applies only when the program is broadcast in multi languages through the SAP broadcast
system.
CHECK BEFORE YOU BEGIN
• Turn ON the TV and set to the
video channel 3 or 4.
• Turn ON the VCR POWER
button.
• Press the TV/VCR selector button
to select the VCR mode.
Press the MENU button.
Press the SET + or – button
to select the SAP option.
Press the ENTER button to
select the ON position.
ENTER
MENU
– SET +
When a TV is connected with an
audio/video cable, turn the TV and
this VCR on, and select the video
input mode on the TV.
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
ER
PO
MENU
CLOOK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
SAP
ON OFF
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
TIM
ER
RE
LL
NI.
EJ
EC
CH
AN
NE
AU
TO
TV
/VC
RO RN
ZE U
T RE
UN ET
T IO
CO ES
C UD
/ R
LE A
CK R
S T
O TE
CL UN
IN
CO
IN
TR
AC
MO
CA
TV
KI
SL
OW
PA
US
E/
RE
ST
ILL
SL
OW
NG
TE
ST
NU
CA
RE
C/
/F.
OT
IP CH
SKAR
SE
AY
NC
OP
PL
1 3
ME
SE
EN
EL
FW
LISTENING TO SAP (SEPARATE AUDIO
PROGRAM)
When the VCR is turned on or a channel selection is
made, make certain the SAP is appared on the screen.
This means that the "Separate Audio Program"
broadcasting is available.
Press the MENU button.
MENU
STEREO SAP
SAP
OR
47
4C93401A-E(P44-47)
47
04.10.99, 12:11
ENGLISH
SEPARATE AUDIO PROGRAM (SAP)
DUPLICATING A VIDEO TAPE
If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape. Make all
connections before turning on the power.
Load a blank cassette tape with the erase
prevention tab intact into the recording VCR.
Load a previously recorded tape into the
playback VCR or CAMCORDER.
Press the INPUT SELECT button to select
AUDIO/VIDEO input position. The "LINE" will
appear on the screen. The "L" indicator will
light up on the display on the recording VCR.
SELECT
INPUT
LINE
PLAYBACK CAMCORDER
PLAYBACK VCR
TO AV JACK
RECORDING VCR
TO VIDEO OUT
TO AUDIO (R) OUT
TO AUDIO (L) OUT
AUDIO/VIDEO cord
AUDIO/VIDEO cord (Not supplied)
(Not supplied)
RECORDING VCR
TO AUDIO (R) IN
TO AUDIO (L) IN
TO VIDEO IN
TO VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer’s
instructions. A typical camcorder dubbing hookup is
shown above.
TO AUDIO (R) IN
TO AUDIO (L) IN
Press the REC/OTR button
on the recording VCR, then
press the PAUSE/STILL
Press the PLAY button on the
playback VCR, then press the
PAUSE/STILL button.
button.
REC/OTR
Press the PAUSE/STILL
button on both the VCRs
simultaneously to begin the
duplicating process.
PAUSE/
STILL
PAUSE/STILL
▲
▲
NOTE:
PAUSE/
STILL
PLAY
PAUSE/STILL
• It is recommended that you set the SPEED to the SP mode on the recording VCR for best results.
• Unauthorized recording of copyrighted television programs, films, video tapes and other materials may
infringe on the rights of copyright owners and violate copyright laws.
48
4C93401A-E(P48-49)
48
04.10.99, 12:10
VIDEO HEAD CLEANING
VIDEO HEAD CLOGGING
ENGLISH
The video heads are the means by which the VCR reads pictures from the tape during playback. In the unlikely
event that the heads become dirty enough to be clogged, no picture will be played back. This can easily be
determined if, during playback of a known good tape, there is good sound, but no picture (picture is extremely
snowy). If this is the case, have the video cassette recorder checked by qualified service personnel.
Good Picture
Snowy Picture
AUTO HEAD CLEANING
The AUTO HEAD CLEANING system cleans the video heads automatically when a cassette is inserted or ejected to
prevent dirt from accumulating on the heads. However, manual head cleaning is needed if the picture on playback is
still unclear although the picture on program is normal. This failure signifies that the head is getting dirty and occurs
when playing poor quality or damaged tapes. If the heads require cleaning, use a high quality head cleaning system
or have them cleaned professionally.
DO NOT ATTEMPT TO CLEAN THE VIDEO HEADS OR SERVICE THE UNIT BY REMOVING THE TOP COVER.
NOTE:
• Video heads may eventually wear out and should be replaced when they fail to produce clear pictures.
• To help prevent video head clogging, use only good quality VHS tapes. Discard worn out tapes.
49
4C93401A-E(P48-49)
49
04.10.99, 12:10
BEFORE REQUESTING SERVICE
Make sure by first checking the following points.
SYMPTOMS
POWER
No power.
CAUSE
The AC power cord is not connected.
Cassette is not inserted.
Although the power is on, it
does not operate.
TV BROADCAST RECEPTION
Antenna connection is not correct.
A TV program that is
selected by the VCR does
not appear on the screen.
Connect the AC power cord to the AC
outlet.
Insert a video cassette.
PAGE
30
Connect it correctly.
14
Antenna cable is disconnected.
Reconnect the antenna cable.
14
The video channel is not in the
Set it to CH 3 or 4.
correct position.
The TV is not set to the video
channel 3 or 4.
The TV/VCR selector is set at TV
Set the TV channel selector to the 3
or 4 position.
mode. (The VCR indicator is not
on the display).
INPUT SELECT is set to the LINE
mode.
A TV program selected by
the VCR does not appear in
color.
POSSIBLE SOLUTIONS
Press the TV/VCR selector button.
(The VCR indicator is on the display).
Press the INPUT SELECT button to
select the TV mode.
The TV/CATV menu option setting. Set the TV/CATV menu option to
select TV or CATV mode.
23
23
23
48
26
RECORDING
TV recording does not work.
Timer recording does not
work.
The erase prevention tab of the
video cassette is broken off.
Place a piece of vinyl tape over the
gap.
38
INPUT SELECT is set to the LINE
mode.
Press the INPUT SELECT button to
select the TV mode.
48
The time is not set correctly.
Reset the present time.
25
The recording start/end time is
not set correctly.
Set the start/end time.
41
The TIMER REC button has not
been pressed. (The TIMER REC
Press the TIMER REC button.
(The TIMER REC symbol
is lit on
41
symbol
is not lit on the display). the display).
50
4C93401A-E(P50-54)
50
04.10.99, 12:09
playing back a recorded
tape.
CAUSE
The TV is not set to the video
channel 3 or 4.
Tracking adjustment beyond
Noise bars on screen.
range of automatic tracking
circuit.
Video heads are dirty.
POSSIBLE SOLUTIONS
PAGE
Set to the video channel 3 or 4 or
adjust the fine tuning button on
your TV set.
Adjust tracking manually using
the TRACKING ▲ and ▼ buttons on
remote control.
Have the video heads cleaned.
The tape is worn or damaged.
Try another tape.
It is not aimed at the remote
Aim it at the remote sensor.
sensor.
Distance too far or too much light
in the room.
There is an obstacle in the path
Operate within 15 feet (5 meters)
reduce the light in the room.
Clear the path of the beam.
of the beam.
The batteries are weak.
Replace the batteries.
The +, – polarity of the bat-
Insert correctly.
teries are not inserted correctly.
The TV/VCR function is in the
VCR mode.
Set to TV, or turn off the VCR
power button.
23
32
49
–
REMOTE CONTROL
Remote control does not
work.
TV programs cannot be
seen using the TV selector.
13
13
13
13
13
–
FOR ADDITIONAL SET-UP INFORMATION OR CUSTOMER SERVICE
PLEASE CALL:
1-800-919-3647
51
4C93401A-E(P50-54)
51
04.10.99, 12:09
ENGLISH
SYMPTOMS
PLAYBACK
No picture on screen when
SPECIFICATIONS
Video Head:
4 Rotary Heads
Audio Track:
Hi-Fi Sound - 2 Tracks
MONO Sound - 1 Track
Power Source:
120V, 60Hz
Power Consumption:
Approx. 12 watts
Tuner:
181 Channel Freq. Synthesized
2-13
VHF
14-69
UHF
14-36 (A)-(W)
CATV
37-59 (AA)-(WW)
60-85 (AAA)-(ZZZ)
86-94 (86)-(94)
95-99 (A-5)-(A-1)
100-125 (100)-(125)
01 (5A)
RF Channel Output:
Channel 3 or 4, Switchable
Inputs/Outputs:
Video:
Hi-Fi Frequency Response:
20Hz to 20,000Hz
Hi-Fi Dynamic Range:
More than 90dB
F.FWD/REW Time:
Approx. 1 min. 48 sec. (with T-120 Cassette Tape)
Speed Search:
SP - 3 & 5 X Normal Speed
LP - 7 & 9 X Normal Speed
SLP - 9 & 15 X Normal Speed
Dimensions:
14-3/16"W X 3-3/4"H X 9-7/16"D
Weight:
8.8 Ibs
Supplied accessories
Remote Control (1)
75 ohm Coaxial Cable (1)
In (RCA) 1Vp-p 75 ohm
Out (RCA) 1Vp-p 75 ohm
In (RCA)–8dB/50K ohm
Audio:
Out (RCA)–8dB/1K ohm
Antenna: VHF/UHF IN 75 ohm coaxial
VHF/UHF OUT 75 ohm coaxial
Specifications are subject to change without notice.
52
4C93401A-E(P50-54)
52
04.10.99, 12:09
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 1999:10:04 13:03:33 Producer : Acrobat Distiller 3.0 for Macintosh Modify Date : 2000:04:14 08:25:36+09:00 Page Count : 52EXIF Metadata provided by EXIF.tools