ORION ELECTRIC M4F9A TV Interface Device User Manual Users manual

ORION ELECTRIC CO., LTD. TV Interface Device Users manual

Users manual

Download: ORION ELECTRIC M4F9A TV Interface Device User Manual Users manual
Mirror Download [FCC.gov]ORION ELECTRIC M4F9A TV Interface Device User Manual Users manual
Document ID277214
Application IDyezJzfK5vJNt8CzyBiSE7w==
Document DescriptionUsers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize18.02kB (225256 bits)
Date Submitted2002-10-16 00:00:00
Date Available2002-10-16 00:00:00
Creation Date2001-12-22 12:32:52
Producing SoftwareAcrobat Distiller 3.0 for Power Macintosh
Document Lastmod2002-10-03 18:12:37
Document TitleUsers manual

VIDEO CASSETTE RECORDER
HR-A592U
INSTRUCTIONS
Printed in Thailand
4F21601B K
02/01
LPT0661-001B
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
CAUTION:
Changes or modifications not approved by JVC could void user’s
authority to operate the equipment.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1 DO NOT place the VCR . . .
...in an environment prone to extreme temperatures or humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are generated.
...on a surface that is unstable or subject to vibration.
2. DO NOT block the VCR’s ventilation openings.
3. DO NOT place heavy objects on the VCR or on the Remote.
4. DO NOT place anything which might spill on the top of the VCR
or on the Remote.
5. AVOID violent shocks to the VCR during transport.
For Customer Use:
Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V~,
60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
• Cassettes marked “VHS” (or “S-VHS”) can be used with this video
cassette recorder. However, S-VHS recording is not possible with
this model.
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
• HQ VHS is compatible with existing VHS equipment.
• As an Energy Star® Partner, JVC has determined that this
product or product model meets the Energy Star® guidelines for
energy efficiency.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
4F21601B Cov-07
22/12/2001, 12:25
IMPORTANT PRODUCT SAFETY
INSTRUCTIONS
Electrical energy can perform many useful functions. But improper
use can result in potential electrical shock or fire hazards. This
product has been engineered and manufactured to assure your
personal safety. In order not to defeat the built-in safeguards,
observe the following basic rules for its installation, use and
servicing.
ATTENTION:
Follow and obey all warnings and instructions marked on your
product and its operating instructions. For your safety, please read
all the safety and operating instructions before you operate this
product and keep this booklet for future reference.
INSTALLATION
1. Grounding or Polarization
(A) Your product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a
safety feature.
If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
(B) Your product may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit
into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
2. Power Sources
Operate your product only from the type of power source indicated
on the marking label. If you are not sure of the type of power supply
to your home, consult your product dealer or local power company.
If your product is intended to operate from battery power, or other
sources, refer to the operating instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric
shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered.
• Do not block the openings by placing the product on a bed, sofa,
rug or other similar surface.
• Do not place the product in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
6. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
ANTENNA INSTALLATION INSTRUCTIONS
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the product,
be sure the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding connectors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
2. Lightning
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and
power-line surges.
4F21601B Cov-07
3. Power Lines
An outside antenna
system should not be
located in the vicinity of
overhead power lines
or other electric light or
power circuits, or where
it can fall into such
power lines or circuits.
When installing an
outside antenna system,
extreme care should be
taken to keep from
touching such power
lines or circuits as
contact with them might
be fatal.
USE
1. Accessories
To avoid personal injury:
• Do not place this product on an unstable cart, stand, tripod,
bracket, or table. It may fall, causing serious injury to a child or
adult, and serious damage to the product.
• Use only with a cart, stand, tripod, bracket, or table recommended
by the manufacturer or sold with the product.
• Use a mounting accessory recommended by the manufacturer
and follow the manufacturer’s instructions for any mounting of
the product.
• Do not try to roll a cart with small casters across thresholds or
deep-pile carpets.
2. Product and Cart Combination
A product and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
product and cart combination to overturn.
3. Water and Moisture
Do not use this product near water—for
example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet
basement, or near a swimming pool and
the like.
4. Object and Liquid Entry
Never push objects of any kind into this product through openings
as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid of any kind
on the product.
5. Attachments
Do not use attachments not recommended by the manufacturer of
this product as they may cause hazards.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
SERVICING
1. Servicing
If your product is not operating correctly or exhibits a marked
change in performance and you are unable to restore normal
operation by following the detailed procedure in its operating
instructions, do not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
2. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
22/12/2001, 12:25
d.
e.
f.
If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore
the product to its normal operation.
If the product has been dropped or damaged in any way.
When the product exhibits a distinct change in performance—
this indicates a need for service.
Buttons, Connectors and Indicators
Front Panel
3. Replacement Parts
REC
POWER
When replacement parts are required, be sure the service technician
has used replacement parts specified by the manufacturer or which
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
PLAY
STOP/EJECT
Cassette loading slot
4. Safety Check
PLAY
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in safe operating condition.
POWER
CH
REW
STOP/EJECT
FF
VIDEO (MONO) L – AUDIO – R
REC
How to use the Remote
Before use, insert two AAA size batteries into the Remote with the
polarity ( and ) matched correctly as indicated on the battery
compartment or on the lid.
• Point the Remote toward the remote sensor on the target
component.
• The maximum operating distance of the remote control is about 5
m.
NOTE:
CH–/+
VIDEO/AUDIO
input connectors
Remote
sensor
FF
REW
Display Panel
If the Remote does not work properly, remove its batteries, wait for a
few seconds, replace the batteries and then try again.
Video heads cleaning
Use a dry cleaning cassette — TCL-2— when:
• Rough, poor picture appears while a tape is played back.
• The picture is unclear or no picture appears.
One-touch Timer Recording
VCR
Timer
Record
ATR (Auto
Tracking)
Tape In
Multi-Function Display
AM/PM
Rear Panel
AC power cord
UHF/VHF IN (ANT)
UHF/VHF
OUT
IN(ANT)
VIDEO
OUT(TV)
AUDIO
AUDIO/VIDEO OUT
UHF/VHF OUT (TV)
4F21601B Cov-07
22/12/2001, 12:25
– Buttons, Connectors and Indicators –
Connections and VCR channel
Setting
Remote
POWER
POWER
Number keys
AUX
REC
–
0 (AUX)
CH–/+
Check contents
CH
REC
Make sure the package contains all of the accessories listed
in “Specifications”.
PAUSE
PAUSE
Situate VCR
Place the VCR on a stable, horizontal surface.
3 Connect VCR to TV
PLAY
REW
STOP
PLAY
REW
FF
Antenna or cable
Coaxial cable
FF
ENTER
MENU
MENU
ENTER
STOP
– SET +
SET–/+
TV/VCR
TIMER
CANCEL
C.RESET
TV/VCR
A.MONITOR
SP/EP
DISPLAY
A.MONITOR
TV POWER
–
TV POWER
INPUT
–
TV CH
TV VOL
Flat feeder
TIMER
CANCEL
C.RESET
SP/EP
Matching transformer
(not supplied)
UHF/VHF
OUT
IN(ANT)
DISPLAY
VIDEO
INPUT
TV CH–/+
OUT(TV)
TV VOL–/+
UHF/VHF
AUDIO
OUT
IN(ANT)
VIDEO
OUT(TV)
AUDIO
This Remote transmit A code
signals only; it is not applicable
to B code signals.
Back of VCR
AC outlet
On-screen display
If you press DISPLAY on the Remote, you can see the current VCR
status on the TV screen. Press DISPLAY again to exit on-screen
display.
The indications are not recorded even if the VCR is in the recording
mode.
WHILE WATCHING TV
DAY AND CLOCK TIME
8 : 30 AM THU
STEREO SAP
CH 125
CHANNEL
TAPE
SPEED
REAL TIME COUNTER
00 : 00 : 00 SP
STEREO
WHILE OPERATING A TAPE
OPERATING MODE
HI-FI STEREO
8 : 30 AM THU
HI-FI
CH 125
AUTO REPEAT
AUTO TRACKING
OUTPUT
SELECTION
4F21601B Cov-07
AUTO TR.
STEREO
Audio/video cable
(not supplied)
TV
STEREO AND
SEPARATE AUDIO
PROGRAM (SAP)
OUTPUT
SELECTION
To audio/video input connectors
TAPE IN
00 : 00 : 00 SP
To 75 Ω terminal
RF cable
(supplied)
RF Connection
1 Disconnect the TV antenna from the TV.
2 Connect the TV antenna cable to the UHF/VHF IN
terminal on the rear of the VCR.
3 Connect the supplied RF cable between the UHF/VHF
OUT terminal on the rear of the VCR and the TV’s
antenna input terminal.
AV Connection
(improves picture quality during tape playback.)
If your TV is equipped with audio/video input connectors
1 Connect the antenna, VCR and TV as shown in the
illustration.
2 Connect an audio/video cable between the AUDIO/
VIDEO OUT connectors on the rear of the VCR and the
audio/video input connectors on the TV.
• Even if you are using audio/video cables to connect your
VCR to your TV, you must also connect it using the RF
cable. This will ensure that you can record one show while
watching another.
22/12/2001, 12:25
– Connections and VCR channel Setting –
Initial Settings
Set VCR channel
To view playback of a recorded tape, or to watch a program
selected by the VCR's channel selector, the TV must be set to
channel 3 or 4 (video channel) when a TV is connected with
the 75 ohm coaxial cable only.
1 Press and hold POWER on the unit for 3 seconds in
standby mode. The video channel will start to flash in the
display.
Press CH –/+ to set the video
channel 3 or 4.
2 Press ENTER to set the
selected video channel in step 1 into the memory.
3 Turn ON the TV and set to CH 3
or 4 to correspond with the
channel selected in step 1.
CH 125
4 Turn on the VCR and select any
channel to receive a TV station
in your area. The channel
number will appear on the screen and display for about
4 seconds.
Language Setting
The default setting is “ENGLISH”.
Access Menu screen
Press MENU on the Remote. Press
SET –/+ to select “LANGUAGE”, then
press ENTER.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
2 Select language
LANGUAGE/IDIOMA/LANGUE
ENGLISH
This VCR offers you the language
ESPAÑOL
choice to view menus and some
FRANCAIS
messages — in English, Spanish or
〈+/–/ENTER/MENU〉
French. Press SET –/+ to select your
desired language, then press ENTER.
Press MENU twice to return to normal screen.
Clock Setting
Preparations
You must set the date and time for timer recording.
Access Menu screen
Press MENU on the Remote. Press
SET –/+ to select “CLOCK SET”, then
press ENTER.
2 Set month, day, year and time
Press SET –/+ until the desired month
appears, then press ENTER. Set the
day, year and time in the same way.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/—/ENTER/MENU〉
MONTH
DAY
YEAR
TIME
10
1 (SUN)
2000
12 : 00 AM
+/—/ENTER/CANCEL/MENU
3 Start clock
Press MENU twice and normal screen
appears.
MONTH
DAY
YEAR
TIME
10
26 (FRI)
2001
8 : 30 AM
〈+/—/ENTER/CANCEL/MENU〉
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to change
blinks, then press SET –/+.
NOTE:
After a power failure or disconnection of the power, the
timer settings will be lost. In this case, reset the present time.
4F21601B Cov-07
22/12/2001, 12:26
– Initial Settings –
Tuner Setting
This VCR is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels. Before
selecting channels, they must be programmed into the VCR’s
memory. In addition to normal VHF and UHF channels, this
VCR can receive up to 113 Cable TV channels. To use this
VCR with an antenna, set the TV/CATV menu option to the
TV mode. When shipped from the factory, this menu option
is in the CATV mode.
– TV/CATV Selection
You can add the channels you want or delete the channels
you do not want manually.
Access Menu screen, then CH Set
Up screen
Perform TV/CATV Selection
Press SET –/+ to select “TV/CATV”,
then press ENTER to select the TV
or CATV mode. The arrow indicates
the selected mode.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
Perform Auto Channel Memory
Press SET –/+ to select “AUTO CH
MEMORY”, then press ENTER.
Add or Delete desired
channels
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈+/–/ENTER/MENU〉
Press SET –/+ on the Remote to
select a channel number you
want to add or delete.
4F21601B Cov-07
TV CATV
AUTO CH MEMORY
ADD/DELETE
ADD
CH 012
〈+/–/ENTER/MENU〉
To add channels
Press ENTER until “ADD” appears on the screen to set to
add the unmemorized channel.
To delete channels
Press ENTER until “DELETE” appears on the screen to set
to delete the channel from memory.
Repeat 1 to 2 to add or delete other channel.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
Press MENU three times to return to normal screen.
NOTE: You can’t select “CH SET UP” if you set the channel
to “L”.
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈+/–/ENTER/MENU〉
Complete Auto Channel Memory
The auto tuning will start. The
channel display will count up and
when finished, the screen returns to
normal.
CH SET UP
CH SET UP
Setting channels automatically
– Auto Channel Memory
Access Menu screen, then CH
Set Up screen
Press MENU on the Remote. Press
SET –/+ to select “CH SET UP”, then
press ENTER.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
〈+/–/ENTER/MENU〉
Press MENU twice to return to normal screen.
Access ADD/DELETE Mode
Press SET –/+ to select “ADD/
DELETE”, then press ENTER.
TV
- VHF/UHF channels
CATV - CABLE TV channels
The VCR can receive a maximum of
181 channels by presetting the
channels into memory.
Access Menu screen, then CH
Set Up screen
Press MENU on the Remote. Press
SET –/+ to select “CH SET UP”, then
press ENTER.
Press MENU on the Remote. Press
SET –/+ to select “CH SET UP”, then
press ENTER.
Setting channels manually
– Manual Channel Set
CH 001
22/12/2001, 12:26
Playback
Slow-motion
Press PLAY ( ) on the
OR Press Play (
Remote.
VCR.
• Playback will proceed at
1/10 th of the normal speed.
• Press PLAY ( ) to resume
normal playback.
Basic Playback
1 Load a cassette
) on the
PLAY
POWER
CH
REW
STOP/EJECT
FF
VIDEO (MONO) L – AUDIO – R
REC
Make sure the window side is up, the rear
label side is facing you and the arrow on
the front of the cassette is pointing
towards the VCR.
• Do not apply too much pressure when
inserting.
• The VCR turns on, and the counter on
the on-screen display is reset, automatically.
• If the cassette’s record safety tab has been removed, playback
begins automatically.
Start playback
Press PLAY (
).
NOTE:
During slow motion picture, some noise might appear on
the TV screen. Use the SET–/+ on the Remote to eliminate
the noise.
Speed search
Press REW (
) or FF
) or
OR Press REW (
) on the Remote.
) on the VCR.
FF (
• Press PLAY ( ) to resume
normal playback.
Variable speed search
) or FF
OR Press REW (
) or FF
Press REW (
) repeatedly on the
) repeatedly on
Remote.
the VCR.
• Press PLAY ( ) to resume
normal playback.
• Each time you press REW
) or FF (
) the
playback speed changes.
During playback
TAPE SPEED
Stop playback
Press STOP (
Remote.
) on the
OR Press STOP/EJECT (■/
) on the VCR.
PICTURE SEARCH SPEED
PRESS ONCE
PRESS TWICE
SP
3X
5X
EP
9X
15X
When the tape is not running
Rewind/fast-forward
Press REW (
) or FF
) on the Remote.
OR Press REW (
) or FF
) on the VCR.
Pause playback and view still picture
Press PAUSE.
• Press PLAY ( ) to resume
normal playback.
Eject the tape
Pause and Frame-by-Frame playback
Press PAUSE to pause, then
press PAUSE repeatedly.
Press PLAY ( ) to resume
normal playback.
Press STOP/EJECT (■/ ) on
the VCR.
• You can also eject the
cassette when the VCR is
turned off.
Turn off the VCR
Press POWER on the
Remote.
4F21601B Cov-07
22/12/2001, 12:26
OR Press POWER (
the VCR.
/l) on
– Playback –
Playback Features
Recording
Adjusting tracking condition
– Tracking Adjustment
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab.
To record on it later, cover the hole
with adhesive tape.
Automatic tracking adjustment
Whenever you insert a tape and start playback, automatic
tracking starts working and continuously analyzes the signal
to enable optimum picture quality during playback.
Manual tracking adjustment
If automatic tracking cannot eliminate noises well during
playback, press SET –/+ on the Remote to eliminate the
noises. Press it briefly for a fine adjustment, or press and
hold for a coarse adjustment.
• Press SP/EP on the Remote again to reactivate automatic
tracking.
Playing back tape repeatedly
– Auto Repeat Play
Access Menu screen
Press MENU on the Remote.
Press SET –/+ to select “AUTO
REPEAT”.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
Select ON/OFF
Press ENTER to select “ON” or
“OFF”.
Press MENU to return to normal
screen.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
Start Auto Repeat Play
Press PLAY. The tape will play
over and over until the repeat
mode is canceled.
Record safety tab
Basic Recording
1 Load a cassette
Make sure the record safety tab is
intact. If not, cover the hole with
adhesive tape before inserting the
cassette.
• The VCR turns on, and the counter
is reset, automatically.
2 Select recording channel
CH 001
Press CH–/+ or the Number keys on
the Remote [CH–/+ on the VCR].
• If you connect the TV and the VCR
only using the RF connection, press
TV/VCR on the Remote so that the
VCR mode indicator lights on the display panel, to view the
program to be recorded.
Set tape speed
Press SP/EP.
00 : 00 : 00 SP
4 Start recording
On the VCR, press REC. Or on the
Remote, while holding REC, press
PLAY ( ).
During recording
Pause recording
Press PAUSE.
• Press PAUSE to resume recording.
• You can select channel in the
recording pause mode.
Stop recording
Press STOP (
Remote.
4F21601B 08-Back
) on the
22/12/2001, 12:22
OR Press STOP/EJECT
(■/ ) on the VCR.
CH 110
– Recording –
Recording Features
Timer Recording
Specifying recording length
- One Touch Timer Recording (OTR)
Timer recording can be programmed on-screen with
the remote control. The built-in timer allows automatic
unattended recording of up to 8 programs within 1
month.
The One-touch Timer Recording feature provides a
simple and convenient way to make a timed
recording.
EXAMPLE: One-touch Timer Recording for 30 minutes.
When a TV is connected with an audio/video cable, turn the
TV on and select the video input mode on the TV.
Load a cassette tape with the
erase prevention tab intact. The
clock display will change in the
counter display.
Press SP/EP to select the desired
tape speed SP or EP.
The counter and SP or EP will
appear on the screen for about 4
seconds.
Press the Number keys or CH –/+
to select the channel to be
recorded.
The channel number will appear
on the screen and display for
about 4 seconds.
Press REC on the VCR or while
holding REC, press PLAY ( ) on
the Remote to begin recording.
Press REC on the VCR again to
stop recording after 30 minutes.
Each additional press of REC will
increase recording time as shown
in the chart below, up to a
maximum of 5 hours. The OTR
and recording time will appear on
screen for about 4 seconds.
NOTES: • Press REC to increase
the time needed for
recording (See the
chart ).
• To cancel OTR, press
STOP ( ) or turn off
the power.
CH 125
OTR 0 : 30
CH 125
Press
Recording time
NORMAL REC
once
0:30
twice
1:00
3 times
1:30
4 times
5 times
2:00
3:00
6 times
4:00
7 times
5:00
8 times
9 times NORMAL REC
Watching one program while recording another
During recording…
• If you connect the TV and the VCR only using the RF
connection to view pictures from the VCR, press TV/VCR
on the Remote so that VCR mode indicator goes off from
the display panel. (The TV broadcast being recorded
disappears.)
• If you are using the AV connection to view pictures from
the VCR, change the TV’s input mode from AV to TV.
Then, select the channel you want to watch, on the TV.
4F21601B 08-Back
• After timer recording is completed, the VCR turns off
automatically.
• You can program the timer recording while a regular
recording is in progress; the menu screens will not be
recorded.
• The timer recording will start at 20 seconds before the time
you predetermined.
EXAMPLE: Program a timer recording for the 26th day,
channel 125 (CATV), 11:00 - 11:30 PM on timer program
number 1 (Tape speed: EP).
00 : 00 : 00 SP
NOTES:
When a TV is connected with an audio/video cable, turn the
TV and this VCR on and select the video input mode on the
TV.
Press MENU on the Remote.
Check the “TIMER REC SET”
option is selected, then press
ENTER.
Press SET –/+ to select one of
the program lines, then press
ENTER.
Press SET –/+ to select the
date, then press ENTER.
Set the start time, end time,
channel and tape speed as in
step 3.
NOTE: To record from external
source, press SET –/+
and set the channel to
"L". "L" will appear next
to CH 125 (or 69).
To enter other programs,
repeat step 2 through 4. Or,
press MENU twice to return
to the normal screen.
Press TIMER on the Remote.
The power will go off, the
TIMER REC indicator ( ) will
light and the VCR stands by
for recording.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
DATE
START
END
CH
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
––
––
––
––
––
––
––
––
DATE
START
〈+/–/ENTER/CANCEL/MENU〉
26(SU)
------------------------------------
-:--:--:--:--:--:--:--:--
END
-:--:--:--:--:--:--:--:--
CH
-----------------
〈+/–/ENTER/CANCEL/MENU〉
To use the VCR while it is in timer recording standby mode
Press TIMER. After you use the VCR, press TIMER again
to put the VCR into timer recording standby mode.
22/12/2001, 12:23
–
–
–
–
–
–
–
–
– Timer Recordings –
TO CORRECT THE SETTINGS
IF THE PROGRAM OVERLAPS ANOTHER
When setting the Timer Recording, press ENTER until the
desired setting blinks, then re-enter the setting using SET –/+.
When finished, press ENTER.
NOTE: Do not overlap programs as portions of the
conflicting programs will be lost. The first
recording time has priority over the next recording
time as shown in the diagram.
NOTES: • The VCR cannot be used while the TIMER REC
indicator ( ) is lit.
• After a power failure or disconnection of the
power plug, all programmed recording settings
must be reset upon resumption of power. In this
case, reset the clock and reprogram any timer
recordings.
• Press CANCEL to move cursor backward for
correction.
TO SET DAILY/WEEKLY TIMER
When setting the date in step 3 in the Setting the Timer
Recording section on the previous page, press SET –
repeatedly.
The setting changes as follows:
8 : 00
9 : 00
One month later
minus one day
WKL-WE
(Weekly Wednesday)
Deleted Parts
Program 3
Non Recorded Portion Parts
Recording
Control Settings
Prog.1
MO-SA (Monday to Saturday)
MO-FR (Monday to Friday)
WKL-TH (Weekly Thursday)
TO CONFIRM THE SETTINGS
DATE START END CH
26 (WE) 11:00PM 11:30PM 125 EP
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
––
––
––
––
––
––
––
DATE
START
END
CH
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–––––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
–:––
––
––
––
––
––
––
––
––
〈+/–/ENTER/CANCEL/MENU〉
–
–
–
–
–
–
–
TO CANCEL A PROGRAM
Press the SET –/+ to select the
“TIMER REC SET” option in the
MENU. Then press SET –/+ to
select the unnecessary program,
and press CANCEL to cancel the
program.
4F21601B 08-Back
10
〈+/–/ENTER/CANCEL/MENU〉
Prog.2
Prog.3
NOTES: • The everyday/every week recording can be made
continuously until the recording is canceled or
the tape reaches the end.
• During timer recording, the automatic rewinding
mechanism does not function.
SU-SA (Sunday to Saturday)
Press SET –/+ to select the
“TIMER REC SET” option in the
MENU. Then press ENTER to
display the timer program list.
Press MENU twice to return to
the normal screen.
11 : 00
Program 2
Example
The current day (Friday)
10 : 00
Program 1
–
–
–
–
–
–
–
–
22/12/2001, 12:23
Other Functions
SEPARATE AUDIO PROGRAM (SAP)
Changing display information
Each time you press DISPLAY, the display
panel shows the time counter and the clock
time alternatively.
• When DISPLAY on the Remote is pressed,
time counter will appear on the TV screen.
To reset the time counter, press C. RESET on the Remote.
BLUE BACK — ON/OFF
When this function is set to “ON”, the TV screen becomes all
blue in the following case:
When receiving a channel not in use.
Press MENU on the remote. Press SET –/+ to select
“NO NOISE BACKGROUND”.
Press ENTER to select “ON”.
Press MENU to return to normal screen.
STEREO RECORDING AND PLAYBACK
RECORDING STEREO BROADCASTS
The VHS Hi-Fi audio system permits high fidelity recording
of MTS STEREO TV broadcasts.
When a MTS STEREO broadcast is
STEREO
received, the STEREO will appear on
the screen and the program can be
viewed or recorded in stereo.
The Hi-Fi STEREO recording procedure is the same as for normal
recordings.
NOTE: When using a CATV system, stereo TV programs may
be transmitted over a mono cable channel. In this case
the word "STEREO" will not appear and the sound will
be in mono.
OUTPUT SELECTION
When viewing an MTS STEREO TV program, or playing a
prerecorded VHS Hi-Fi STEREO videotape, press A.MONITOR
to select how the audio will be heard through the speakers.
Normally set to the Hi-Fi STEREO position, this button can be
set to the MONO position if the stereo broadcast or videotape
audio is of poor quality. The "R" and "L" positions allow the
audio from the Right or Left Hi-Fi channel to be heard over
both TV speakers. This button has no effect when viewing a
MONO videotape or TV program. Each time when you press
the button, OUTPUT SELECTION display appears on the screen
for several seconds. Refer to the chart below.
OUTPUT
SELECTION
SOUND HEARD ON BOTH
SPEAKERS
STEREO
L ch
R ch
MONO
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
Your VCR is fitted with an SAP broadcast system which
enables you to switch to a SEPARATE AUDIO PROGRAM
when viewing a selected channel.
This function applies only when the program is
broadcast in multi-languages through the SAP broadcast
system.
When a TV is connected with an audio/video cable, turn the
TV and this VCR on, and select the video input mode the TV.
Press MENU.
Press on the Remote SET –/+
to select “SAP” option.
Press ENTER to select “ON”
position.
11
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
Press MENU to return to
normal screen.
LISTENING TO SAP
When the VCR is turned on or a channel selection is made,
make certain "SAP" appears on the screen.
This means that the "Separate Audio Program" broadcasting is available.
STEREO SAP
SAP
OR
JVC TV Remote Control
This Remote can control some functions (TV POWER,
INPUT, TV CH –/+ and TV VOL –/+) of a remote
controllable JVC TV without setting.
NOTE:
• It’s not possible to operate a unit not equipped with a
remote sensor.
• This Remote can control a JVC TV only.
NOTES: • When playing back a tape that is not recorded in
Hi-Fi stereo mode, the audio will automatically be
monaural.
• When listening to a VHS Hi-Fi video tape or MTS
broadcast through the VHF/UHF jack (Audio/
Video cord not connected), the sound will be
monaural.
4F21601B 08-Back
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT ON OFF
CH SET UP
ON OFF
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
ON OFF
〈+/–/ENTER/MENU〉
22/12/2001, 12:23
Editing
You can use your VCR as the playback or recording VCR.
You can use a camcorder as the playback VCR and your VCR
as the recording VCR. Refer also to the other components’
instruction manuals for connection and its operations.
1 Make connections
Example: When using this VCR as the playback VCR
This VCR (for playback)
To audio/video out
Audio/video cable (not
supplied)
To audio/video input
Another VCR (for recording)
• When using this VCR as the recording VCR, connect this
VCR’s audio/video input connectors to the audio/video
output connectors on the other VCR. If the playback VCR
is monaural, connect the audio output connector on the
playback VCR to the left audio input connector on this
VCR.
2 Load cassettes
Insert the playback cassette into the playback VCR and the
cassette to be recorded on into the recording VCR.
3 Select input mode on recording VCR
Select the correct external input on the recording VCR.
On this VCR (when using this VCR as the recording VCR);
Select “L” — when connecting the other VCR to the audio/video
input connectors on the front panel.
Press O (AUX) or CH–/+ on the Remote [CH–/+ on the VCR].
4 Start playback
Press PLAY (
) on the playback VCR.
5 Start recording
Press REC on the recording VCR.
4F21601B 08-Back
12
22/12/2001, 12:23
Before Requesting Service
Make sure by first checking the following points.
SYMPTOM
CAUSE
POSSIBLE SOLUTION
POWER
No power.
The AC power cord is not connected.
Connect the AC power cord to the AC
outlet.
Although the power is on, it
does not operate.
Cassette is not inserted.
Insert a video cassette.
Antenna connection is not correct.
Connect it correctly.
Antenna cable is disconnected.
The video channel is not in the correct
position.
Reconnect the antenna cable.
The TV is not set to the video channel
3 or 4.
Set the TV channel selector to the 3 or 4
position.
The TV/VCR selector is set at TV mode
(The TV/VCR indicator is not lit).
INPUT is set to the LINE mode.
The TV/CATV menu option setting.
Press the TV/VCR selector button (The TV/
VCR indicator will light).
TV BROADCAST RECEPTION
A TV program that is selected by
the VCR does not appear on the
screen.
A TV program selected by the
VCR does not appear in color.
Set it to CH 3 or 4.
Press the Number key or CH –/+ button to
select your desired TV program.
Set the TV/CATV menu option to select TV
or CATV mode.
RECORDING
The erase prevention tab of the video
cassette is broken off.
Place a piece of vinyl tape over the gap.
INPUT is set to the LINE mode.
Press the Number key or CH –/+ button to
select your desired TV program.
The time is not set correctly.
Reset the present time.
The recording start/end time is not set
correctly.
The TIMER button has not been
pressed (The TIMER REC symbol is
not lit on the display).
Set the start/end time.
No picture on screen when
playing back a recorded tape.
The TV is not set to the video channel 3
or 4.
Noise bars on screen.
Tracking adjustment beyond range of
automatic tracking circuit.
Video heads are dirty.
The tape is worn or damaged.
Set to the video channel 3 or 4 or
adjust the fine tuning button on your
TV set.
Adjust tracking manually using the SET – or
+ buttons on the remote control.
Have the video heads cleaned.
Try another tape.
It is not aimed at the remote sensor.
Aim it at the remote sensor.
Distance too far or too much light in
the room.
There is an obstacle in the path of the
beam.
Operate within 15 feet (5 meters)
reduce the light in the room.
Clear the path of the beam.
The batteries are weak.
Replace the batteries.
The +, – polarity of the batteries are
not inserted correctly.
Insert correctly.
The TV/VCR function is in the VCR
mode.
Set to TV, or turn off the VCR power
button.
TV recording does not work.
Timer recording does not work.
Press the TIMER button (The TIMER REC
symbol is lit on the display).
PLAYBACK
REMOTE CONTROL
Remote control does not work.
TV programs cannot be seen
using the TV selector.
4F21601B 08-Back
13
22/12/2001, 12:23
Specifications
GENERAL
Power requirement
Power consumption
Power on
Power off
Temperature
Operating
Storage
Operating position
Dimensions (W x H x D)
Weight
Format
Maximum recording time
SP
EP
AC 120 V, 60 Hz
9W
1.7 W
5°C to 40°C (41°F to 104°F)
–20°C to 60°C (–4°F to140°F)
Horizontal only
360 mm x 95 mm x 224 mm (14-3/16" x 3-3/4" x 8-13/16")
3.2 kg (7.1 lbs)
VHS NTSC standard
210 min. with ST-210 video cassette
630 min. with ST-210 video cassette
NTSC-type color signal and EIA monochrome signal, 525 lines/60 fields
DA-4 (Double Azimuth) head helical scan system
42 dB
230 lines
100 Hz to 10,000 Hz
20 Hz to 20,000 Hz
RCA connectors (IN x 1, OUT x 1)
Frequency-synthesized tuner
Channels 2–13
Channels 14–69
113 Channels
Channel 3 or 4 (switchable; preset to Channel 3 when shipped) 75 ohms,
unbalanced
VIDEO/AUDIO
Signal system
Recording/Playback
system
Signal-to-noise ratio
Horizontal resolution
Frequency range
Normal audio
Hi-Fi audio
Input/Output
TUNER
Tuning system
Channel coverage
VHF
UHF
CATV
RF output
TIMER
Clock reference
Program capacity
Memory backup for timer :
Quartz
1-month programmable timer/8 programs
Approx. 5 sec.
ACCESSORIES
Provided accessories
RF cable (F-type), Infrared remote control unit, “AAA” battery x 2
Specifications shown are for SP mode unless specified otherwise.
E. & O.E. Design and specifications subject to change without notice.
4F21601B 08-Back
14
22/12/2001, 12:23
FOR SERVICING (Only in U.S.A.)
HOW TO LOCATE YOUR JVC SERVICE CENTER
TOLL FREE: 1-800-537-5722
http://www.jvc.com
Dear Customer,
In order to receive the most satisfaction from your purchase, please read the instruction booklet before operating the unit. In
the event that repair is necessary, or for the address nearest your location within the Continental United States, please call 1800-537-5722 for your nearest authorized servicer or visit our website at www.JVC.com. Remember to retain your Bill of Sale
for Warranty Service.
— JVC
JVC SERVICE & ENGINEERING
COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
Sophisticated electronic products may require occasional service. Just as quality is a keyword in the engineering and
production of the wide array of JVC products, service is the key to maintaining the high level performance for which JVC is
world famous. The JVC service and engineering organization stands behind our products.
NATIONAL HEADQUARTERS
JVC SERVICE & ENGINEERING COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
10 New Maple Avenue
Pine Brook, NJ 07058-9641
ACCESSORIES
To purchase accessories for your JVC product, you may
contact your local JVC Dealer.
From the 48 Continental United States call toll free:
1-800-882-2345 or on the web at www.JVC.com
4F21601B 08-Back
15
Don’t service the product yourself.
CAUTION
To prevent electrical shock, do not open the cabinet. There
are no user serviceable parts inside.
Please refer to qualified service personnel for repairs.
22/12/2001, 12:23
WARRANTY (Only in U.S.A.)
LIMITED WARRANTY
CONSUMER VIDEO 1-90
JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL
PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail
purchase for the period as shown below. (“The Warranty Period”)
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN
COMMONWEALTH OF PUERTO RICO.
WHAT WE WILL DO:
If this product is found to be defective, JVC will repair or replace defective parts at no charge to the original owner. Such repair
and replacement services shall be rendered by JVC during normal business hours at JVC authorized service centers. Parts used for
replacement are warranted only for the remainder of the Warranty Period. All products and parts thereof may be brought to a JVC
authorized service center on a carry-in basis except for Television sets having a screen size 25 inches and above which are covered
on an in-home basis.
WHAT YOU MUST DO FOR WARRANTY SERVICE:
Return your product to a JVC authorized service center with a copy of your bill of sale. For your nearest JVC authorized service
center, please call toll free: (800) 537-5722.
If service is not available locally, box the product carefully, preferably in the original carton, and ship, insured, with a copy of your
bill of sale plus a letter of explanation of the problem to the nearest JVC Factory Service Center, the name and location of which
will be given to you by the toll-free number.
If you have any questions concerning your JVC Product, please contact our Customer Relations Department.
WHAT IS NOT COVERED:
This limited warranty provided by JVC does not cover:
1. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation,
lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by JVC to render such
service, or if affixed to any attachment not provided with the products, or if the model or serial number has been altered,
tampered with, defaced or removed;
2. Initial installation and installation and removal for repair;
3. Operational adjustments covered in the Owner’s Manual, normal maintenance, video and audio head cleaning;
4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
5. Signal reception problems and failures due to line power surge;
6. Video Pick-up Tubes/CCD Image Sensor, Cartridge, Stylus (Needle) are covered for 90 days from the date of purchase;
7. Accessories;
8. Batteries (except that Rechargeable Batteries are covered for 90 days from the date of purchase);
There are no other express warranties except as listed above.
THE DURATION OF ANY IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY, IS LIMITED
TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
JVC SHALL NOT BE LIABLE FOR THE LOSS OF USE OF THE PRODUCT, INCONVENIENCE, LOSS OR ANY OTHER DAMAGES,
WHETHER DIRECT, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS
OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF THIS WARRANTY. ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR
PURPOSE, ARE LIMITED TO THE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion of incidental or consequential damages or limitations on how long an implied warranty
lasts, so these limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have
other rights which vary from state to state.
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, New Jersey 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAILS OF
REFURBISHED PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED PRODUCT WARRANTY INFORMATION
PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet. Retain
this information for future reference.
Model No.:
Serial No.:
Purchase date:
4F21601B 08-Back
Name of dealer:
16
22/12/2001, 12:23

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:12:22 12:32:52
Producer                        : Acrobat Distiller 3.0 for Power Macintosh
Modify Date                     : 2002:10:03 18:12:37+09:00
Page Count                      : 16
Has XFA                         : No
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A7RM4F9A

Navigation menu