ORVIBO Electronics SN11 Motion Sensor User Manual

Shenzhen ORVIBO Electronics Co., Ltd. Motion Sensor

User Manual

Motion SensorSN11/SN11ZWManufacturer's Name: Shenzhen ORVIBO Electronics Co.,Ltd.Motion SensorTrade Mark:Model number:SN11Operating Temperature: -10° C to 40° CThis device was tested for typical body-worn operations. To comply with RFexposurerequirements, a minimum separation distance of 20cm must be maintained betweenthe user’sbody and the handset, including the antenna. Third-party belt-clips, holsters, andsimilaraccessories used by this device should not contain any metallic components. Body-wornaccessories that do not meet these requirements may not comply with RF exposurerequirements and should be avoided. Use only the supplied or an approvedantenna.This device in compliance with the essential requirements and other relevantprovisions ofDirective 2014/53/EU. All essential radio test suites have been carried out.1. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OFUSED BATTERIES ACCORDING TO THE INSTRUCTIONS2. The device complies with RF specifications when the device used at 20cm formyour bodyThis device complies with part 15 of the FCC Rules. Operation is subject to the following twoconditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates, usesand can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed andoperated with minimum distance between 20cm the radiator your body: Use only the suppliedantenna.FCC ID: 2ACLPSN117F, Block A7, Nanshan i Park, No.1001 Xueyuan Road, Nanshan District, Shenzhen, China

Navigation menu