OSIM OS-868 OS-868 User Manual iBT 11 Rev0 8 01
OSIM INTERNATIONAL LTD OS-868 iBT 11 Rev0 8 01
OSIM >
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3095578 |
| Application ID | VYd8Xh+jXqQGw/VEN1qQrQ== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 15.72kB (196538 bits) |
| Date Submitted | 2016-08-12 00:00:00 |
| Date Available | 2016-08-15 00:00:00 |
| Creation Date | 2013-11-04 18:19:36 |
| Producing Software | GPL Ghostscript 9.06 |
| Document Lastmod | 2013-11-04 18:19:36 |
| Document Title | iBT-11-Rev0.8.01 |
| Document Creator | PDFCreator Version 1.6.1 |
| Document Author: | hw.poon |
Bluetooth 4.0 Low Energy Module Bluetooth 4.0 Low Energy Module 0.8.01 1/8 Bluetooth 4.0 Low Energy Module 2. Features A single chip radio and baseband IC for Bluetooth applications Fully Qualified Bluetooth Smart (V4.0 Low Energy single mode) specification Enhanced 8051 MCU core with 256k flash memory Support 3 simultaneous live connections in central role Coin battery friendly 2.0V – 3.6V operation Hardware I2C master / slave interface Low power consumption, < 30uA on the average of once-a-second communication 10mS data transfer latency Programmable transmitter power Support BLE stack including GAP, GATT, SM and L2CAP 3. Applications Proximity and Lost-prevention key fob Wireless Keyboard and Mouse RC and Interactive Toy Medical and Healthcare monitoring Sports and Fitness equipment Bluetooth 4.0 Low Energy Module 7. Electrical Specification 7.1. Absolute Maximum Rating Item Power Supply Voltage Peak Current Storage Temperature Symbol VDD Ipk TSTG Rating -0.4 to 3.7 0 - 70 -40 to 85 Unit mA °C 7.2. Recommended Operating Condition Item Power Supply Voltage RF Operating Temperature Operating Temperature Symbol VDD Miin 2.0 -20 Typ 3.0 25 25 Max 3.6 80 70 Unit °C °C 7.3. Digital Input / Output Port Characteristics VDD=3.0V, operating temperature = 25 °C unless specified otherwise Symbol Parameter Condition Min. Input Voltage Levels VIL Input low voltage VIH Input high voltage 2.5 Output Voltage Levels VOL Output low voltage IOL = -4mA VOH Output high voltage IOH = 4mA 2.4 Input and Tri-state Current with I/O Pad leakage current -1 Input Capacitance Current Consumption Operating Current, RX active Operating Current, TX active 0 dBm TX Power Standby Current, TX & RX inactive Typ. 18 18 50 Max. Unit 0.5 0.5 uA pF mA mA uA Bluetooth 4.0 Low Energy Module VDD=3.3V, operating temperature = 25 °C unless specified otherwise Receiver Sensitivity at 0.1% BER Units Miin dBm Typ Max Bluetooth Spec ≦ -70 -75 VDD=3.3V, operating temperature = 25 °C unless specified otherwise Transmitter Units RF Output Power dBm In Band Emission (+/- 2MHz) dBm In Band Emission (+/- 3MHz) dBm Carrier Frequency Offset kHz Condition Value 2402MHz 2440MHz 2480MHz 2406MHz 2440MHz 2476MHz 2406MHz 2440MHz 2476MHz 2402MHz 2440MHz 2480MHz -5.17 -4.90 -4.41 -29,5 -31.5 -35.1 -36.3 -37.9 -39.1 30 30 30 Bluetooth Spec -20 to +10 ≦ -20 ≦ -30 -150 to +150 Bluetooth 4.0 Low Energy Module This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device is intended for OEM integrators only. Please see the full grant of equipment document for restrictions. If the FCC ID of this module is not visible when it is installed inside another device, then the outside of the device into which the module is installed must be label with "Contains FCC ID:ARG-OS-868 and IC:10142A-OS868".
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 5 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:20b584d3-4796-11e3-0000-c73295624ddf Producer : GPL Ghostscript 9.06 Keywords : () Modify Date : 2013:11:04 18:19:36+08:00 Create Date : 2013:11:04 18:19:36+08:00 Creator Tool : PDFCreator Version 1.6.1 Document ID : uuid:20b584d3-4796-11e3-0000-c73295624ddf Format : application/pdf Title : iBT-11-Rev0.8.01 Creator : hw.poon Description : () Author : hw.poon Subject :EXIF Metadata provided by EXIF.tools