OUNI TECHNOLOGY T3 Bluetooth Earbuds User Manual

SHENZHEN OUNI TECHNOLOGY CO.,LTD. Bluetooth Earbuds

User Manual

*Please read the manual carefully and keep it for future use.ENGISH5.1.Music mode 5.2. Call mode* Manual update time:2019.2.211. IntroductionThank you for choosing DIOWING TWS-T3, and we hope you will be satisfied! Enjoy it!Before the first use, please fully charge the battery by placing the headphones inside the box.2. Components of the Product:3. Instructions3.1. Charge of the batterya.When charging the box, a blue flashing light will turn on, and when it has finished charging, it will switch off.When charging the headphones, please place them inside the box, the charging status will be activated automatically; during charging there will be a warning light that will flash slowly, when the charging has finished, the light will turn off.3.2. Connection of the two headphones:a.First time to connection: take out the two headphones from the box, keep a distance of 10 cm between the two headphones, within 10 seconds the two headphones will connect, the headphone lights will flash quickly after which they will flash slowly.b.Turn on the Bluetooth in your smartphone or other devices with bluetooth connection, search T3 and click on link. The light will flash quickly then slowly, the connection is successful, you can start using them.6.FAQ6.1. The smartphone’s bluetooth  can not find the headphonesPlease see point 3.2. and check if the headset is turn on or not. If the phone can not find the headset, restart the headset and the phone and repeat the actions above.6.2.The headphones do not connect to each othera.Pull them out of the box and press the mode button for 8 seconds. Once the button is off, release the button.b.Press the headphones down for a period of 10 seconds, the indicator light will flash twice quickly and then switch off.c.Press the headphones for a long time for 3 seconds to switch them on and restore the connection with the bluetooth device.d.After the headphones have been reset to factory settings, they can not be automatically reconnected to the last connected device. The functions must be reset.6.3. The connection between the headset and the smartphone is not stablea.The headphone’s battery is low, please charge it as soon as possible.b.There is interference between the device and the headset or other electrical signals. Please keep the earphones and the device unobstructed and try not to use them in a complicated environment.c.The effective operating range of the headphones and equipment is generally 10 meters. In general, if there is no obstacle in the middle, better functioning can be achieved. Once the established distance has been exceeded, there may be interference and / or disconnection. 6.4.While playing music because it is not able to pause, change song.This function requires that the device supports the AVRCP protocol (remote audio / video control profile). Devices that do not support the protocol are not available. The Android smatphone must click on the multimedia audio switch in the currently connected device option.6.5.Only the right ear is connected to the Bluetooth and it works.a. The left earphone’s battery is low, recharged and used after chargingb.The coupling between left and right ear is untidy. Refer to 6.2 for coupling the left and right earphones.6.6.During the recharge, the indicator light is off.a. Make sure the earphones are connected to the charging compartment. b. If the headset is not used for a long period of time, the headset will enter the sleep state. At this time, the indicator lights up for about 30 minutes.7. Caratteristiche8. Keeping and MaintenanceDuring the use, please read the following suggestions to help you meet the warranty terms and correct use.1. Store and use the product in a normal temperature environment.2. Keep the product dry. Do not expose this product to rain or moisture.Avoid using this product during intense training or sweating to prevent sweat from entering the product and damaging the product.3. Do not drop, shake or hit the product with the hardware.4. Do not disassemble this product yourself. Non-professionals could damage the product.5. Do not place the product in a place exposed to sunlight or high temperatures. High temperatureReduce the life of electronic components and damage the battery.9. Terms of serviceThe after-sales service of the product is made directly from the purchase shop, contact directly the store of purchase for after-sales service.If the headset is damaged due to the following reasons, the warranty service is not provided:1. Abnormal use: rupture of the auricle, compartment of charge, etc.2. Improper Storage: If the headset is exposed to moisture for a long period of time, put the speaker and the microphone to enterthe water.3. Maintenance without the company's authorization.10. The product consists of: Headphone (auxiliary) leftHeadphone(Main) RightMicrophone charging portIndicator lightof the charge boxCharge boxTouch button Micro USBcharging portLed indicatorInsert the headphones inside, the charging will be activated automatically, and the charge status will be signaled by the indicator light; when the charge is completed the indicator light will turn off.c.Continually next, activate the bluetooth on the smartphone or other devices, pull out the headphones and automatically connect to the bluetooth of the device.3.3. Connection of a single headseta.Single use of the right earphone: pull out only the right earphone and connect it following the instructions of the two headphones connection.b.Single use of the left earphone: pull out only the left earphone. Once turn off manually, long press to turn them turn on and enter connection mode and T3 search to connect via bluetooth.4. Methods of use4.1. Proper use method:Where there is the inscription "L" is the left headphone, the writing "R" is the right headphone.The upper part of the earphones goes inside the ear, fits comfortably in your ear.If you want to have a greater audio experience, you can try to change them with gel pads. If worn properly they will be comfortable and firm.4.2. Outdoor UseThe human body contains a lot of water, which could create problems with the Bluetooth connection. The right earphone is set to receive the cell phone's Bluetooth signal. We recommend putting the cell phone in the right pocket, which can effectively avoid the blocking signal of the human body and improve anti-interference ability during use. 5. Key functionPause / PlayVolume +Volume -Next songPrevious songClick on any headphonesDouble click on the right headsetDouble click on the left headsetLong press the left headsetLong press the right headsetUse FunctionAnswer the callHang up the callReject the callSingle click on any headphonesSingle click on any headphonesLong press on any keyUse FunctionBluetooth version:  5.0   Frequency range:  2.402-2.480GHZAudio Format:  Playback Time  Playback Time:  4-6HTransmission power:  Class II  ≥10M  Stanbdby time:  120HFrequency ranges:  20-20KHZ  Charging Time:  1.5HHeadphone battery capacity:    50mAh  Box charging time:  2.5HBattery capacity box:  1000mAh  Voltage and charging current:   MICRO USB 5V/500MASemsibility:  98dB±3db@1KHZ Weight:  5g±1gDiameter / impedance of the horn:10mm/16Ω  Waterproof:  IPX5Supported Format:  HFP1.7 HSP1.2 A2DP1.3 AVRCP1.6 SPP1.2 PBAP1.0Charge box Headphones T3Instruction manualInstruction manualUSB charging cable Medium, large(small ear cushions are pre-installed directly on the headphones)85mm75mm*Please read the manual carefully and keep it for future use.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu