Obihai Technology 1-GFPB100 GFPB VoIP Adapter User Manual

Obihai Technology, Inc. GFPB VoIP Adapter

User manual

GFPB100 USERGUIDEVERSION 1.0
IntroductionGFPB100 built with a high-performance system-on-a-chip platform to ensure highquality voice conversations, it is a dedicated systems targeted at applications for voiceover IP service. With GFPB100, user does not require a computer to make and receivecall through internet. To get started, all you need is a phone, power and a connectionto internet.This User Guide is providing simple information on the GFPB features and basicoperating instruction.Telephony Features:•Message Waiting Indication – Visual and Tone Based•Speed Dialing•Three Way Conference Calling with Local Mixing•Hook Flash Event Signaling•Caller ID – Name and Number•Call Waiting•Call Forward – Unconditional•Call Forward on Busy•Call Forward on No Answer•Call Transfer•Anonymous Call•Block Anonymous Call•Do Not Disturb•Call Return•Repeat DialingCall Routing & Voice Service Features:•SIP Support for Voice and Fax Over IP from Internet Telephony Service Providers•High Quality Voice Encoding Using G.711, G.726, G.729 and iLBC Algorithms
•Recursive Digit Maps & Associated Call Routing(Outbound, Inbound)Connecting Power to the DeviceConnect the supplied 12-volt power adapter to the device and the wall outlet orworking power strip. Only use the power adapter supplied with the original packagingto power the GFPB. Use of any power adaptor other than what was provided with theGFPB100will void the warranty and may cause the unit to not function at all or causeundesired operation.Internet Connection Set-up and ConfigurationConnect one end of an Ethernet cable to the INTERNET port and the other end of theEthernet cable to an Ethernet port on your Internet router or Ethernet switch. By default,the GFPB will request an IP, DNS and Internet (WAN) Gateway IP address via DHCP.PHONE port Set-up and ConfigurationA phone has a very basic UI (User Interface) for I/O (Input/Output) of signaling orcontrol messages.The GFPB PHONE port supports input signaling and control messages comprised of: OnHook, Off Hook, Hook Flash, DTMF tones.The GFPB PHONE port supports signaling and control messages comprised of: CallerID/CWCID, MWI, DTMF/Tone, Ring, Pol-Rev, CPC, and Power Denial.The GFPB100 PHONE port has a Maximum Sessions capacity of two (2). This is notconfigurable.The GFPB PHONE port will reply BUSY to a new incoming call when:•The PHONE port already has 2 calls in session.•The PHONE port is ringing the phone
•The PHONE port is in a dialing or fast busy “Invalid” state•The PHONE port is already in a FAX callThe GFPB100 PHONE port supports Call Waiting when a 2nd call is an inbound call:•A Hook-Flash (or depressing the Flash button) invokes switching between two (2)calls•When the GFPB100 PHONE port goes On-Hook this will end current call andinvoke a ring for the holding callWhen the GFPB100 PHONE port goes On-Hook this will end current call and invoke aring for the holding call.The GFPB100 PHONE port supports 3-way Calling when the second call is an outboundcall.On the first Hook-Flash during an active call the GFPB100 can make a secondoutbound call.On the second Hook-Flash, the first call and the second outbound call are placed in aconference.To remove the second conferenced party, invoke a third Hook-Flash.When the GFPB100 goes On-Hook during a 3-way Call, this will become a transferwhen 2nd (outbound) call is ringing or connected. If the 2nd (outbound) call does notsucceed, e.g. no answer or busy, then the GFPB100 PHONE port can go to an On Hookstate and will ring as the holding call is still on the line, or simply Hook-Flash toresume the first call.The GFPB100 PHONE port can select from the following services to which it cancomplete a call: SP1 Service (SP1), SP2 Service (SP2), SP3 Service (SP3), SP4 Service (SP4).End User Features Available on the GFPB100
Call ForwardingCall Forwarding allows you to send incoming calls to another number of your choosing.Calls can be forwarded to a number reachable by the service. The following types ofcall forwarding are possible with the GFPB100:Call Forward ALL: When you use Call Forward ALL, all calls are immediately forwardedto the number you indicate when you turn on the feature. To enable Call Forward ALL,from a phone attached to the GFPB100, dial *72. You will be prompted to enter thenumber to which the calls will be forwarded. Dial the number plus the # key and aconfirmation tone will be heard. To disable Call Forward ALL, dial *73. A confirmationtone will be heard.Call Forward on Busy: When you use Call Forward on Busy, all calls are forwarded to thenumber you indicate only when you are already engaged in a call with your phoneattached to the GFPB100. To enable Call Forward on Busy, from a phone attached tothe GFPB100, dial *60. You will be prompted to enter the number to which the calls willbe forwarded. Dial the number plus the # key and a confirmation tone will be heard.To disable Call Forward on Busy, dial *61. A confirmation tone will be heard Call forward on No Answer: When you use Call Forward on No Answer, all calls areforwarded to the number you indicate only when you do not answer the call with yourphone attached to the GFPB100. To enable Call Forward on No Answer, from a phoneattached to the GFPB100, dial *62. You will be prompted to enter the number to whichthe calls will be forwarded. Dial the number plus the # key and a confirmation tonewill be heard. To disable Call Forward on No Answer, dial *63. A confirmation tonewill be heard.Caller ID – Name & NumberCaller ID allows you to see the number and (if available) the name of the person callingyou. You can use this information to decide whether or not to answer the call. Youmust have a phone (or device) that supports caller ID to use this feature.
Call WaitingCall waiting lets you take a second call that comes in when you are already on thephone with another party and not have to disconnect to take the new call. When youare on the line with the first party, you will hear a tone signaling you there is a secondcall coming in. To answer this call, press the “flash” button on your phone or depressand release the switch hook on the telephone. The first party will be placed on holdand you will be connected to the second party until you press the “flash” button ordepress and release the switch hook again.Since Call Waiting can interfere with fax calls already in progress, it is advised that youconfigure your fax machine to dial the Cancel Call Waiting code before it dials thedestination fax machine.3-Way Calling3-Way Calling allows you to talk to two parties at the same time with everyone on atelephone at a different location. To use 3-Way Calling, when you are in a call withanother party and want to add a second to the conversation, press the “flash” button ordepress and release the switch hook on your phone. You will be presented with asecond dial tone and the first party will be placed on hold. Dial the second party.When they answer, you will be able to inform them that you intend to connect themwith the first party (now on hold) and have a conference. At this point press the“flash” button or depress and release the switch hook on your phone. This willconnect the first party, the second party and yourself. You can all continue to talktogether.Call Transfer (Attended)You can transfer a call to a third party using the attended transfer capabilities of theGFPB100. To use Attended Call Transfer, while in a call with the party who will betransferred, press the “flash” button or depress and release the switch hook on yourphone. You will be presented with a second dial tone. The party who will betransferred will be placed on hold. Dial the transfer target. When the transfer targetanswers, you will be able to inform them that you intend to connect them with the
party on hold. At this point press the “flash” button or depress and release the switchhook on your phone. This will connect the party to be transferred, the transfer targetand yourself. You can continue to talk together, as this is now a 3-way call, or youcan hang up the phone and the other two parties will remain connected.Caller ID Block (Anonymous Calling)Caller ID Block allows you to mask your name and number information from appearingon the phone you are calling. To use Caller ID Block for one call only, dial *67 andthen the destination number. To use Caller ID Block on a persistent basis, dial *81from the handset attached to the GFPB100. All calls will use the Caller ID Blockfeature until you cancel the Caller ID Block. To cancel Caller ID Block, dial *82 fromthe handset attached to the GFPB100.Note: This service feature requires ITSP support. While most ITSP services support thisservice feature, at present, Caller ID Blocking is NOT available with Google Voiceservice.Automatic Call Back (Call Return)Automatic Call Back, also called Call Return can be used to call back the last caller whocalled you without actually dialing their number. To use Automatic Call Back, from thephone attached to the GFPB100, dial *69. The GFPB100 will then attempt to use theprevious callers Caller ID information to make the call.Repeat DialingRepeat Dialing is useful when you call a number that is busy and you want to keeptrying so that your call gets through when the far end is available. Repeat dialing willcontinue to try the last number until the GFPB100 device can complete the call orRepeat dialing is cancelled. To enable repeat dialing, from the phone attached to theGFPB100, dial *05 and hang up. To cancel repeat dialing, from the phone attached tothe GFPB100, dial *06.Anonymous Call Block
Anonymous Call Block allows you to block calls from incoming callers when there is noidentifying caller ID name or number. Incoming calls will be presented with a busysignal. To use Anonymous Call Block, from the phone attached to the GFPB100, dial*77. To cancel Anonymous Call Block, from the phone attached to the GFPB100, dial*87.Do Not DisturbDo Not Disturb (DND) allows you to set the phone to immediately forward calls madeto your GFPB100 to the number set-up as your voicemail number / account. If novoicemail account is set-up, the GFPB100 will return a busy signal to the caller untilyou turn off DND. To turn on DND, from a phone attached to the GFPB100, dial *78. Toturn off DND, from a phone attached to your GFPB100, dial *79.Message Waiting Indication – Visual and Tone BasedMessage Waiting Indication allows you to be notified when there is a new voicemessage for you. The GFPB100 supports both Visual and Tone based MessageWaiting Indication. With Tone-based Message Waiting Indication, you will know thereis a message for you when you hear a “stutter” dial tone right when you first pick upthe phone to make a call. Typically, this stutter tone will be removed once you listento your message(s). Visual-based Message Waiting Indication will turn on a light orscreen icon on your phone (or phone base station) when there is a message waiting foryou. Typically, this light or icon will go dark when you have listened to your newmessage(s).Basic Operating InstructionAfter the GFPB100 is configured with the ITSP service, user should be able to make andreceive call with the telephone that’s connected to the GFPB100 phone port.GFPB100 phone port is acting no difference in comparing with any traditional PSTN line.
When user goes Off-hook the phone handset, user should hear dial tone and dial thecalling party number.User should hear ring back tone or busy tone before the calling party is answer.After the call is answer, there will be a two way audio with high quality.Simply On-hook the phone handset to end the call.FCC Warning StatementChanges or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to Part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference toradio or television reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.

Navigation menu