Oblong IRWP001 VIO Tracking System WAP User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3342129
Application ID	UehgSskRlVWJcWunyjdBAw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	4.82kB (60310 bits)
Date Submitted	2017-03-31 00:00:00
Date Available	2017-05-15 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Skia/PDF m58
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual

Version 2.0 - Created/updated for release 2/13/2017
VIO Tracking System
Safety and Regulatory Guide
TABLE OF CONTENTS
Introduction
Covered Oblong products
Safety Information
AC Power Adapter
Battery
Temperature
Regulatory information
Location of regulatory labels
FCC compliance
IC compliance
CE certification
EU disposal information
International certifications
International safety standards
Version 2.0 - Created/updated for release 2/13/2017
INTRODUCTION
This guide contains important safety and regulatory information to prevent personal injury
while using Oblong VIO System. It also includes cautions and best practices to prevent
damage to the VIO Wand product. Please ensure that you understand and follow all safety
guidelines, instructions, and warnings before using your Oblong VIO System.
Covered Oblong products
Oblong Wand Model No. IRW1.0
Oblong WAP Model No. BLEAP1.0
Contact your local sales representative for the correct regional variant necessary in your
environment. Always check for the latest version of the manual on
www.oblong.com/viosystem​ Click on the product page and select Downloads. For additional
compliance information, please visit: ​www.oblong.com/compliance
SAFETY INFORMATION
AC Power Adapter
●
●
●
●
●
●
Risk of electric shock, fire, or burn if using an AC adapter other than the one provided
with this device.
Do not use a damaged power supply or attempt to repair one that is damaged.
Do not immerse the power supply in water or subject it to physical abuse.
Inspect the power supply regularly for damage to its cable, plug, and casing.
Connect only to a properly wired, isolated, and grounded outlet.
Failure to use the included power adapter may violate regulatory compliance
requirements and may expose user to safety hazards.
Battery
●
●
●
●
●
Wand device is powered by a lithium ion battery.
There is a risk of explosion, fire, or chemical burns if a battery is replaced incorrectly or
by an incorrect battery type.
Do not use if battery has been mutilated, or exposed to conducting materials, liquid, fire,
or heat (above 54° C or 130° F).
When a battery is misused, it may explode or leak, causing burns and personal injury.
If a battery leaks, use normal precaution and discard immediately.
Version 2.0 - Created/updated for release 2/13/2017
●
●
Batteries should be recycled where possible. Disposal of used or damaged batteries
must be in accordance with local environmental regulations.
Battery replacement must comply with with the guidelines in the Oblong VIO Wand User
Guide ​www.oblong.com/viowand.pdf​.
Temperature
●
●
●
●
System is intended to be used in office and indoor environments only.
For use in ambient temperatures between ​0° C and 35° C (32° F and 95° F).
These devices radiate heat on external surfaces during normal operation, which is both
normal and safe.
Avoid using or storing next to heat sources, in direct sunlight, or outside the intended
temperature ranges.
REGULATORY INFORMATION
Location of Regulatory Labels
Wand: internal battery compartment
WAP: external bottom surface
FCC Compliance
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
●
●
●
●
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
Version 2.0 - Created/updated for release 2/13/2017
The user is cautioned that changes and modifications made to the equipment without the
approval of manufacturer could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received including interference that may cause undesired operation.
Changes or modifications to this product not authorized by Oblong, Inc could void your right
to use or operate this product. Where shielded interface cables or accessories have been
provided with the product, they must be used in order to ensure with FCC regulations.
IC Compliance
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including interference that may cause undesired
operation of device.
CE Certification
Oblong Wand Model No. IRW1.0 and Oblong WAP Model No. BLEAP1.0 are fit for use in all
European Union countries, Norway and Switzerland.
The CE certificate can be found on:
Oblong Wand Model No. IRW1.0: ​www.oblong.com/CE_0000422.pdf
Oblong WAP Model No. BLEAP1.0:​ ​www.oblong.com/CE_0000422.pdf
EU Disposal Information
In the European Union, this symbol indicates that this product including battery should not be
disposed with other household waste. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, it is your responsibility to hand it over to a designated
collection point for the recycling of waste electrical and electronic equipment. For more
information, please contact your local waste collection center or visit w
​ ww.oblong.com/​recycle​.
Version 2.0 - Created/updated for release 2/13/2017
International Certifications
International Safety Standards
This equipment is built in accordance with the requirements of the international safety
standards IEC60950-1, EN60950-1, UL60950-1 and CAN/CSA C22.2 No.60950-1, which are
the safety standards of information technology equipment including electrical business
equipment. These safety standards impose important requirements on the use of safety
critical components, materials and insulation, in order to protect the user or operator against
risk of electric shock and energy hazard having access to live parts. Safety standards also
impose limits to the internal and external temperature rises, radiation levels, mechanical
stability and strength, enclosure construction and protection against the risk of fire. Simulated
single fault condition testing ensures the safety of the equipment to the user even when the
equipment’s normal operation fails.
Copyright
© 2017 Oblong Inc. All rights reserved.
The Oblong logo is a trademark of Oblong Inc., registered in the U.S.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Producer                        : Skia/PDF m58
Page Count                      : 5

EXIF Metadata provided by EXIF.tools