Ocean HKSPK18 PBT HELLO KITTY BLUETOOTH SPEAKER User Manual F 3088
Ocean International Company PBT HELLO KITTY BLUETOOTH SPEAKER F 3088
Ocean >
User manual
POTTERY BARN TEEN
1
User Manual
PBT HELLO KITTY BLUETOOTH SPEAKER
Model: PBT-HK2018HO
Manufacture:Shen Zhen Hao Jie Xin Plastic Hardware Co Ltd
POTTERY BARN TEEN
2
Feature
3W single channel Bluetooth speaker with call function
AUX in
LED indicator
Button: Play / Pause
Switcher: Power ON/OFF
Status sound
Button function
button
Short press
Double Click
P/P button (Play/Pause)
1. music play & pause
2. Call mode : Answer &
hang up
Redial last number
Switcher (ON/OFF)
Power ON /OFF
INSTRUCTIONS
1. Turn the switcher to “on”, the speaker will play the open tone and the blue light will flash.
2. After power on, the speaker will automatically connect to last paired device, the connect time is 10 sec.,
the blue light will flash.
3. If the speaker cannot connect back to last pair device, after playing the open tone, the speaker will
automatically enter to pairing mode
4. After successfully connecting the device, speaker will play the tone and the blue light will flash slow.
5. Can use the device to play the music directly or press the button shortly to play the music, when music is
playing, press the button shortly can pause the music
6. When the call coming, the speaker will enter to call mode, press the button shortly can answer the call,
during the call, press the button again can hang up the call.
7. Double click the button can redial the last number you call out
8. Insert the audio cable to line-in hole will enter to AUX IN mode, the blue light will always on
9. Insert the USB cable into DC IN hole to charge the battery, the red light will turn on, when the battery is
full the light will turn off.
POTTERY BARN TEEN
3
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.