Ohsung Electronics URC-100 RF REMOTE CONTROLLER User Manual EMISSION TEST REPORT

Download:
Mirror Download [FCC.gov]
Document ID	651698
Application ID	+uacdjXIOJ04rqvaJxxRbQ==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.32kB (866488 bits)
Date Submitted	2006-04-27 00:00:00
Date Available	2006-04-26 00:00:00
Creation Date	2006-04-25 20:04:00
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-04-25 20:04:21
Document Title	EMISSION TEST REPORT
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	최선미

Test Report No.: GETEC-E3-06-017
FCC Part 15 Subpart C
APPENDIX I
: USER’S MANUAL
EUT Type: RF Remote Controller
FCC ID.: OZ5URC-100
1
The RF10 Remote
WELCOME
Note: The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment.
Warnig: Changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate the equipment.
MASTERCONTROL™ RF10 Owner’s Manual
© 2006 Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
The Quick Setup DVD Program Guide supplied with the RF10
will assist you in programming your remote by guiding you
through an easy step-by-step process. This Owner’s Manual is
designed as a companion reference source to the DVD Guide,
should you need to refer back to a particular section, or review
certain instruction detail not covered in the DVD. However,
if you are unable to watch the DVD Guide for some reason,
everything you need to know about programming the RF10
is contained in this Manual.
Congratulations on purchasing Universal Remote Control’s
MASTERCONTROLTM RF10 Pre-programmed and Learning
Remote Control! You now have the power to control your entire
home entertainment system with one easy-to-use remote. The
RF10 can be used with thousands of audio/video Components
because of the extensive code library pre-programmed into the
remote. And, the RF10’s impressive lineup of special advanced
features can automate and customize the operation of your
system in many ways. So... get ready to sit back, relax and
simplify your home entertainment experience.
Congratulations!
19
21
23
25
MacroPower Setup
SimpleSound Setup &
Other ‘Punch Throughs’
AUX Function: Programming
an 8th Component
Recalling Pre-programmed
Setup Code Numbers
Pre-Programmed Code Notes
PRE-PROGRAMMED
CODE NOTES
Frequently Asked Questions
Specifications/Warranty
OTHER
INFO
AUDIO
SAT
CD
AUX
Location of commands
39
42
44
47
COMMAND
LOCATIONS
TV
CABLE
DVD
VCR
Pre-Programmed Code Tables
35
PowerBlasterTM
THE OPTIONAL
POWERBLASTERTM
PREPROGRAMMED
CODE TABLES
33
67
68
58
49
52
54
56
38
37
27
Re-setting RF10 to Original
Factory Default Settings
TM
Erasing Learned Button, Macro
or Favorite Channel Commands
ERASING
COMMANDS
17
TM
Customizing Component Names
on the LCD Screen
ADVANCED
SETUP
11
13
16
16
Overview
Pre-Programmed Code Method
Pre-Programmed Auto-Search Method
Learning Method
Transmitting (Busy Signal) Icon
Child Lock Feature
BASIC
SETUP
Overview
Battery Installation
Activating Component Commands
The SHIFT Button
The LIGHT Button
Keypad Layout
GETTING
STARTED
LOCATION OF
CONTROLS
The RF10 Remote
CONTNETS
CONTROL LOCATIONS
Keypad Layout
The very first step is to insert
the four AAA batteries that
are included in the package
into the battery compartment
located in the back of the
remote. Just press the tab
and lift off the cover. Please
be sure to insert the batteries
correctly as you see in the
diagram. Remember, there
is a positive and negative
end to each battery and you
can tell by the + (positive) and
– (negative) symbols. Once
the batteries are correctly
installed, replace the cover.
Now you’re ready to start!
Battery Installation
+ - +
The RF10 is designed to operate up to 8 different
Audio/Video Components and is pre-programmed to
operate virtually all brands of TV, VCR, DVD and CD
Players, Cable Set Top Boxes, Satellite Receivers, TiVo
and other DVRs, Audio Components, Tape Decks,
Multimedia PCs, XM Radio, Ipod, X-Box, Lighting Controls
and other custom installation products. It also offers an
impressive lineup of special features designed to provide
you with many time-saving conveniences and enhance
your overall entertainment experience. However, we
strongly recommend that you fully complete all of the
Basic Setup steps before proceeding to customize your
RF10 with any of the special advanced features.
This is what MASTERCONTROL™ RF10 is all about!
Getting Started-Overview
Overview & Battery Installation
GETTING STARTED
5
Activating Component Commands
GETTING STARTED
LIGHT
BUTTON
SHIFT
BUTTON
TV
COMPONENT
Once you’ve programmed RF10 for your Components, all
you have to do to operate a specific Component is press
the desired COMPONENT button. For example, press the
TV COMPONENT Button. The top of the screen changes
to TV. Now all of the buttons on the RF10 will work your
TV. To operate another Component, simply press one of
the other eight COMPONENT buttons.
Activating Component Commands –
Simple, Easy, Intuitive
Try it out!
The fully backlit keypad makes the RF10 easy to use in
the dark or dim lighting conditions. Simply press the
LIGHT button to backlight all the keypad buttons and
LCD screen. To turn off the backlight, press the LIGHT
button again, or just wait ten seconds (the backlight
automatically shuts itself off). Lights out!
The LIGHT Button
NOTE: The AUDIO COMPONENT has a unique SHIFT functionality. It can
send input commands to you’re A/V Surround Sound receiver by pressing
the COMPONENT buttons after SHIFT is selected.
Note: If you don’t press a button within 10 seconds, the RF10 will exit SHIFT
mode and return to normal operation.
Press SHIFT to access a second command for each
COMPONENT button. While RF10 is in SHIFT mode, the
display on the LCD screen will blink. The buttons labeled
with white text on the case, indicate just some of the secondary commands available when you are in SHIFT mode.
The SHIFT Button
SHIFT Button/LIGHT Button
GETTING STARTED
7
Pre-Programmed Code Method
BASIC SETUP
Once you have located the
3-digit code (or in some cases,
several code numbers) for the
Component that you want to
operate with your RF10, write
them ALL down on a piece of
note paper. It’s important that
you write down all the codes
because only one code is going
to work for you.
Now, turn on the Component you
want to program… let’s say your
TV to start. Look up your TV’s
manufacturer setup code from
your reference list.
The pre-programmed 3-digit
codes are found in the back of
this Manual on page 38. The
codes are listed by Component
category (i.e., TV, VCR, DVD,
etc.), then by brand name. For
instance, if you want to locate
a code for a Sony TV, first
locate the TV category, and
then look for the Sony brand.
IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SET will disappear
from the screen, signaling that you have
exited setup mode and you will need to
start over.
Press and hold the
COMPONENT button (in this
case TV) and SELECT button at
the same time for approximately
3 seconds. The LCD screen will
display “SET” signaling that you
are now in Setup mode and
ready to program your TV.
STEP 3:
STEP 2:
STEP 1:
Pre-Programmed Code Method
There are three ways to program the RF10:
> The Pre-Programmed Code Method
> The Pre-Programmed Auto-Search Method
> The Learning Method
The Pre-Programmed Code Method allows you to setup all
the buttons at once, so it’s the fastest and easiest of the
three methods. The Auto-Search Method scans through all
the codes in the RF10, one at a time. The Learning Method
allows you to transfer functions from other remotes (old or
new), one button at a time.
Basic Setup - Overview
SELECT
BUTTON
COMPONENT
BUTTON
Pre-Programmed Code Method
BASIC SETUP
9
Pre-Programmed Code Method
BASIC SETUP
PLAY
BUTTON
STOP
BUTTON
VOLUME
BUTTON
ON
BUTTON
CODE
DISPLAY
Point the RF10 toward the
Component you want to program,
(in this example, TV), and punch in
the 3-digit code that you wrote
down for that specific Component.
Use the Number buttons 0-9 on the
remote to punch in the code. If the
3-digit code number that you just
punched in is correct, the
Component will turn off. If the
Component does not turn off,
continue entering code numbers
from your list until the Component
turns off. Some brands have
several possible code numbers.
STEP 4:
YOUR OLD REMOTES AWAY.
JUST A FEW MINUTES AND PUT ALL
YOU CAN FINISH BASIC SETUP IN
2 THROUGH 6. IN MOST SYSTEMS,
COMPONENTS BY REPEATING STEPS
NOW, PROGRAM THE REST OF YOUR
Once you have found the right
code, save the code number by
pressing the Component button
you just programmed (in this case
TV) one more time. The LCD
screen will blink “SAVED” two
times, signaling that the code
number has been successfully
saved, and then return to normal
operating mode (in this case TV).
When the Component turns off,
press the ON button to turn the
Component back on. Now you
can test the Volume and Channel
buttons (for TV), or PLAY and
STOP (for VCR and DVD) to make
sure they all work. If any of the
buttons do not work properly, you
need to find a new correct code.
For example, maybe your Sony TV
turned off with code number 147,
but the volume controls did not
work properly. If this is the case,
try the next code number listed for
that Component until you find a
perfect match.
NOTE: If the Component fails to turn off
after you have entered all the code
numbers listed for your brand, you can
use either the Auto-Search Method on
Page 11 or the Learning Method on
Page 13.
STEP 6:
STEP 5:
10
Pre-Programmed Code Method
BASIC SETUP
11
Pre-Programmed Auto-Search Method
BASIC SETUP
ON
BUTTON
UP ARROW
BUTTON
SELECT
BUTTON
TV
COMPONENT
IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don't press a button
within 30 seconds, SET will disappear from
the screen, signaling that you have exited
setup mode and you will need to start over.
Press and hold both the
COMPONENT (in this case TV) and
SELECT buttons for approximately
three seconds. The LCD screen
will display "SET" signaling that
you are now in Setup mode and
ready to program your TV.
When the Component turns off,
press the ON button to turn the
Component back on. Now you
can test the Volume and Channel
buttons (for TV), or PLAY and
STOP (for VCR and DVD) to make
STEP 4:
Press the UP ARROW Cursor
button once. Each time the UP
ARROW button is pressed, the
code will count up one code
number and send a POWER OFF
signal. When the correct code
is sent out, the component will
turn off.
Turn on the Component you want
to program... let’s say your TV to
start.
STEP 2:
STEP 3:
STEP 1:
The Auto-Search Method is a way you can scan through
other codes in the table to find the right code for your
component.
Pre-Programmed Auto-Search Method
NOTE: If you can’t find the right code after
trying the UP ARROW button for 5 minutes,
please try the Learning Method on Page 13.
Once you have found the right
code, save the code number by
pressing the Component button
you just programmed (in this
case TV) one more time. The
LCD screen will blink “SAVED”
two times, signaling that the code
number has been successfully
saved, and then return to normal
operating mode.
STEP 5:
sure they all work. If any of the
buttons do not work properly,
you need to find a new correct
code. So, continue pressing the
UP ARROW button until you find
a code that makes the VOLUME
and PLAY buttons work properly.
12
Pre-Programmed Auto-Search Method
BASIC SETUP
13
Learning Method
BASIC SETUP
ENTER
BUTTON
COMPONENT
BUTTON
IMPORTANT:You now have 30 seconds to
perform the next step while you are in
SETUP mode. If you don’t press a button
within 30 seconds, SETUP will disappear
from the screen, signaling that you have
exited LEARN mode and you will need to
start over.
Press and hold both the desired
Component button (in this case
TV) and the ENT (Enter) button
for approximately 3 seconds.
The display on the LCD screen
will show LEARN, signaling that
you are now in LEARN mode and
ready to ‘teach’ your RF10.
NOTE REGARDING SHIFT
FUNCTIONS: You can teach a
second additional command to a
button by pressing the SHIFT button,
then pressing the button you want
to teach. Additionally, using the
SHIFT button, you may teach
commands to the COMPONENT
buttons themselves at the AUDIO
mode. Simply select the AUDIO
component in STEP 2, press SHIFT,
and then the component buttons
you want to teach.
Press any button on the RF10
that you want to teach a command to. Once you press a button, the top of the screen display
will change from “LEARN” to
“READY”.
Line-up the RF10 with the other
remote control, head-to-head,
one or two inches apart.
STEP 2:
STEP 3:
STEP 1:
The RF10 can actually ‘learn’ commands from other remote
controls (old or new), one-button-at-a-time, so it will never
become obsolete. RF10 is the last remote you’ll ever need!
Just follow these simple steps:
Learning Method
If the “FAIL” label appears on top
of the display, try ‘teaching’ the
same button to the RF10 once
again by repeating STEPS 3 and 4.
Now, continue to teach the RF10
any other commands from your
other remotes by repeating STEPS
3 and 4 until the RF10 has learned
all the buttons you want.
Press and hold the button on the
other remote control that you
want to ‘teach’ to the RF10 until
the LCD display on the RF10
changes to either “GOOD” or
“FAIL”. It will then change to
“READY”. If the “GOOD” label
appears on top of the display, you
were successful.
STEP 4:
14
Learning Method
BASIC SETUP
15
Learning Method
BASIC SETUP
• Gradually vary the distance
between the remote controls.
Try 1”, 2” and so on, up to 4 feet.
•
• Even though the old remote
seems to be working fine, put in
fresh alkaline batteries.
To return to an original
pre-programmed function,
a learned function must be erased.
• Learned functions are retained
even after a different Setup Code
Number is programmed into the
remote.
• Learned functions are
automatically erased when a
new function is learned on the
same button.
• All buttons can be learned except
for the PAGE, MAIN and LIGHT
buttons.
• Learned functions override any
existing pre-programmed
functions on the remote control.
Some additional Information
regarding the Learning Process:
• Try tapping the button on your old
remote instead of pressing and
holding it during the learning
process.
• Move to another room. Plasma
TVs, sunlight, halogen or quartz
lighting can interfere with the
learning process.
NOTE: Test all your new commands.
If any of them don’t work, try the
Learning Method again, following
these suggestions:
Once you have completed
teaching all the button
commands to the RF10, save
your work and return to normal
operation by pressing both the
COMPONENT button you
pressed in STEP 2 and the
ENT (Enter) button at the same
time. The remote will respond
by flashing SAVED on the display
twice, then return to normal
operating mode.
STEP 5:
To Return to Normal Operation:
Press the +10 and ENT (Enter) buttons simultaneously again
for 3 seconds. The LCD will display the last use mode.
To Activate:
Press the +10 and ENT (Enter) buttons simultaneously for
3 seconds. The LCD will blink “LOCK” three times and then
display “LOCK”.
This ‘child-lock’ feature prevents the unauthorized use of
the remote control by children. It blocks all operations of
the remote control.
CHILD LOCK FEATURE
When a command is being transmitted, an icon will appear
in the far right side of the LCD screen. This indicates that a
signal is being sent.This is particularly useful when setting
up Macros, since it flashes with every step of a sequence
of commands.
Transmitting (Busy Signal) Icon
16
Transmitting (Busy Signal) Icon
BASIC SETUP
17
Customizing Y our RF10 with
Special Advanced Features
ADVANCED SETUP
The current COMPONENT name
will then appear on the screen,
with the first space/character
blinking on and off. Change the
character by using any of the
NUMBER buttons. Each press
of the same NUMBER button
selects the next character of
that number’s group, as shown
in the diagram below:
Press and hold both the
COMPONENT button you want
to rename and the MENU
button at the same time for
approximately 3 seconds, until
the word “EDIT” is displayed on
the LCD screen. This signals
that you are now in EDIT mode.
IMPORTANT:You now have 30 seconds
to perform the next step while you are
in EDIT mode. If you don’t press a
button within 30 seconds, EDIT will
disappear from the screen, signaling
that you have exited EDIT mode and
you will need to start over.
STEP 2:
STEP 1:
You can easily edit or change the name of any of the eight
COMPONENT buttons on the LCD screen. For example, you
can rename AUX to “LIGHTS” or SAT to “DISH”, etc.
Here’s how:
Customizing Component Names on the LCD Screen
After you’ve finished all your basic setup, you can choose
to make operation easier by customizing the RF10 just the
way you want, using the Special Advanced Setup Features
described in this section.
Customizing Your RF10 with
Special Advanced Features
STEP 4:
When you are finished editing
the COMPONENT name, press
the COMPONENT button you
pressed in STEP 1 to save the
changes. The RF10 will respond
by flashing “SAVED” twice, then
automatically return to normal
operating mode.
STEP 3:
Once the character you want
appears, move to the next space
by pressing the Right ( ) cursor
button. Use the Left ( ) cursor
button to move the blinking
character to the left. Use the
Down ( ) cursor button to
delete the currently blinking
character.
18
Customizing Your RF10 with
Special Advanced Features
ADVANCED SETUP
19
MacroPowerTM Setup
ADVANCED SETUP
You can also program delays in between commands by pressing the (II) PAUSE button. Each
press adds half a second to the delay.
NOTE: Don’t worry about the number of steps.
Each macro button can store up to 50 steps, so
you are not likely to run out of steps!
(NOTE: Whenever a button is pressed, another
Macro step is counted and displayed on the
screen.)
Press the first COMPONENT
button you want to turn on
(in this example, TV) and then
confirm the command by
pressing the ON button. Repeat
this step for all the other
components in the order you
want them to turn on (in this
example, VCR followed by
CABLE). The LCD screen
changes to the MACRO step
display for each command.
Press and hold both the ON
button and the MUTE buttons at
the same time for approximately
3 seconds, until the word
“MACRO” is displayed on the
LCD screen. This signals that
you are now in MACRO Setup
mode.
IMPORTANT:You now have 30 seconds
to perform the next step while you are
in MACRO mode. If you don’t press a
button within 30 seconds, MACRO will
disappear from the screen, signaling
that you have exited MACRO Setup
mode and you will need to start over.
STEP 2:
STEP 1:
To setup a Power ON macro button that will turn ON several
components at the same time (for example, TV, VCR and
CABLE), follow these easy steps:
MacroPower™ is a unique feature that enables you to turn
all of your Components ON or OFF, at the same time, simply
with the press of one button. We call that a “Macro”.
What would normally take multiple remotes and button
pushes, the RF10 can accomplish with the press of one
button. In addition to the Power ON or OFF buttons, any of
the Component buttons can be set to be Macro buttons as
well. Feel the power!
MacroPower™ Setup
SETTING UP A POWER OFF OR
A COMPONENT BUTTON AS
MACRO:
If you want to program macro
commands for the OFF or one of
the 8 component buttons, in
STEP 1, simply press the button
you want to be a macro instead
of the ON button. For example,
you can setup an AUDIO button
to be a macro by pressing AUD
(Audio) and MUTE for 3 seconds.
Once the screen displays
“MACRO”, press the button with
the command you want. Then
complete and save the Macro
by following STEP 3 as outlined
above.
Once you have entered all the
desired Power On commands,
press the CHANNEL ( ) UP
button to save your MacroPower
commands. The RF10 will
respond by flashing “SAVED”
twice, then automatically return
to normal operating mode.
STEP 3:
PROGRAMMING A
“PRESS & HOLD” MACRO:
Another option for macro buttons
is to only send the macro
commands if the button is
pressed and held. This is setup
by entering a delay as the first
step of the macro. The amount of
delay determines how long the
user must press the button
before the macro is sent. The
advantage of this option is that a
normal press of the COMPONENT
button will simply switch
Components without sending the
macro command.
20
MacroPowerTM Setup
ADVANCED SETUP
21
SimpleSoundTM Setup & Other
‘Punch Throughs’
ADVANCED SETUP
IMPORTANT: You now have 30 seconds to perform the next step while you are in Setup mode.
If you don’t press a button within 30 seconds,
“SET” will disappear from the screen, signaling
that you have exited Setup mode and you will
need to start over.
Press and hold both the
COMPONENT button you want to
add volume control to, such as
DVD or VCR, and the SEL
(Select) button for approximately
3 seconds, until the word “SET”
is displayed on the LCD screen.
This signals that you are now in
SimpleSound Setup mode.
STEP 2:
In a basic home entertainment
system, the sound may come
from your TV. In a more
advanced system, the sound may
come from your audio
Component such as a Surround
Sound Receiver or Home Theatre
system. So, first, you need to
identify which Component you
want to use in your system for
sound.
STEP 1:
Press the VOL+ button. The
screen will alternately blink
PUNCH and FROM in the display.
STEP 3:
Now, let’s setup SimpleSoundTM. Here’s how:
SimpleSoundTM is a dynamic feature that gives you total
volume control over all the Components in your system,
even those without their own built-in volume control,
such as TiVo, DVD and VCR... saving you the hassle and
inconvenience of constantly needing to switch between
Component modes on the remote. With SimpleSoundTM,
you can set the RF10’s volume control buttons to always
control the sound in your system, even when you’re in
VCR or DVD mode, without switching back to AUDIO or
TV. Even more exciting, SimpleSound¢‚ is what is called
a ‘Punch Through’ feature and is not limited strictly to
volume control. Click and enjoy!
SimpleSoundTM Setup & Other ‘Punch Throughs’
Repeat STEPS 2-4 until all your
other components (VCR, CABLE,
CD, etc.) operate the volume
perfectly.
STEP 5:
Now, press the COMPONENT
button for the component that
has the Volume control you
want (i.e., TV for systems using
the TV speakers, AUDIO for
systems using Surround Sound
receivers). The screen display
will flash “SAVED” twice to
confirm the command is saved,
and the RF10 will automatically
return to normal operating
mode. This sets up a group of
three buttons (Volume Up,
Volume Down, and MUTE) in
one action!
STEP 4:
Simply perform the steps above and
for step 3, press the first button listed in
the group and all buttons will be
programmed.
• VOL - Volume Up, Volume Down and
Mute
• CH - Channel Up, Channel Down,
Previous Ch and Channel (0-9)
buttons.
• PLAY - Play, Stop, Pause, Rewind
and Fast Forward
• VOD - Menu, Guide, Info, Exit, Up,
Down,Left, Right, Select
NOTE: The Punch Through feature is not limited
to volume and can also be applied to other
groups of buttons and functions. If you find
yourself switching to a particular component
frequently to use a group of controls, consider
using Punch Through for another group, as
listed here:
22
SimpleSoundTM Setup & Other
‘Punch Throughs’
ADVANCED SETUP
IMPORTANT: You now have 30 seconds to
perform the next step while you are in Setup
mode. If you don’t press a button within
30 seconds, ”SET” will disappear from the
screen, signaling that you have exited Setup
mode and you will need to start over.
Press and hold both the AUX
and SEL (Select) buttons at the
same time for approximately 3
seconds, until the word “SET”
displays on the LCD screen.
AUX
BUTTON
NUMBER
BUTTONS
When the Component turns off,
press the ON button to turn the
Component back on. Now you
can test the Volume and
STEP 5:
Point the RF10 toward the
Component you want to
program, (in this example, TV),
and punch in the 3-digit code
that you wrote down for that
specific Component. Use the
Number buttons 0-9 on the
remote to punch in the code.
If the 3-digit code number that
you just punched in is correct,
the Component will turn off.
If the Component does not turn
off, continue entering code
numbers from your list until
the Component turns off.
Some brands have several
possible code numbers.
STEP 4:
Press the component button you
want to setup (in this case TV).
Turn on the component you
wish to setup (a second TV for
example).
STEP 2:
STEP 3:
STEP 1:
After you’ve finished customizing the RF10’s programming for
seven primary components, and you did not use AUX, you
can take advantage of the AUX function to program an 8th
component, such as a second TV, VCR, or any other
audio/video component that you may have in your system.
AUX Function: Programming
an 8th Component
NOTE: Any component button can be setup
to operate any type of component by
following these same steps. Simply
substitute the desired component button
in place of AUX in STEP 2.
Once you have found the right
code, save the code number by
pressing the Component button
you pressed in STEP 2 (in this case
AUX) one more time. The LCD
screen will blink "SAVED" two
times, signaling that the code
number has been successfully
saved, and then return to normal
operating mode.
STEP 6:
Channel buttons (for TV), or PLAY
and STOP (for VCR and DVD) to
make sure they all work. If any of
the buttons do not work properly,
you need to find a new correct
code. For example, maybe your
Sony TV turned off with code
number 147, but the volume controls did not work properly. If this
is the case, try the next code
number listed for that Component
until you find a perfect match.
24
23
AUX Function:Programming
an 8th Component
ADVANCED SETUP
AUX Function: Programming
an 8th Component
ADVANCED SETUP
ADVANCED SETUP
Recalling Pre-Programmed
Setup Code Numbers
25
The RF10 will then automatically
return to normal operating
mode.
Press and hold both the
COMPONENT you want to identify and the SEL (Select) buttons
at the same time for
approximately 3 seconds, until
the word “SET” is displayed on
the LCD screen. This signals
that you are now in setup
mode.
IMPORTANT:You now have 30 seconds
to perform the next step while you are
in SETUP mode. If you don’t press a
button within 30 seconds, SETUP will
disappear from the screen, signaling
that you have exited setup mode and
you will need to start over.
STEP 2:
Press the INFO button. The
name of the selected
component will blink twice on
the LCD screen, followed by the
3-digit code. Write down the
code numbers as they appear
for future reference. Pages 37 of
this manual provides a
convenient space for you to
record your code numbers.
STEP 1:
In case you didn’t write down the Pre-Programmed Code
Numbers that you used to setup your RF10, you can easily
recall them using this simple process:
Recalling Pre-Programmed
Setup Code Numbers
26
ADVANCED SETUP
27
Erasing Commands - Overview
ERASING COMMANDS
COMPONENT
COMPONENT
BUTTONS
BUTTON
ENT
ENT
BUTTON
BUTTONS
To save, press and hold the
COMPONENT button and the
ENT button until the word
“SAVED” flashes twice on the
LCD screen. The RF10 will then
automatically return to normal
operating mode.
STEP 3:
Repeat this step to erase any
other buttons in the same mode.
Press and hold the button you
want to erase for 2 seconds.
The display will flash ERASE
twice, then display LEARN.
IMPORTANT:You now have 30 seconds to
perform the next step while you are in
LEARN mode. If you don’t press a button
within 30 seconds, LEARN will disappear
from the screen, signaling that you have
exited erase mode and you will need to
start over.
STEP 2:
STEP 1:
Press and hold both the
COMPONENT button where the
command is stored and the ENT
(Enter) button at the same time
for approximately 3 seconds,
until the word “LEARN” is
displayed on the LCD screen.
Erasing One Learned Command
If you really want a fresh start, it is possible to reset the
RF10 to its original factory default settings.
You can erase a single command, all learned commands in
each component mode, SimpleSound™ commands or
MacroPower™ commands.
Erasing Commands – Overview
28
Erasing Commands
ERASING COMMANDS
29
Erasing Commands
ERASING COMMANDS
Press and hold both the
COMPONENT button you want
to erase and the PAUSE button
until the display flashes ERASE
eight times, followed by SAVED.
Release the buttons and the
RF10 will then automatically
return to normal operating
mode.
COMPONENT
BUTTONS
PAUSE
BUTTON
COMPONENT
BUTTONS
ENT
BUTTON
IMPORTANT:You now have 30 seconds to
perform the next step while you are in
LEARN mode. If you don’t press a button
within 30 seconds, LEARN will disappear
from the screen, signaling that you have
exited erase mode and you will need to
start over.
STEP 2:
STEP 1:
Press and hold both the
COMPONENT button where the
command is stored and the ENT
(Enter) button at the same time
for approximately 3 seconds,
until the word “LEARN” is
displayed on the LCD screen.
Erasing All Learned Commands in One Component
30
Erasing Commands
ERASING COMMANDS
31
Erasing Commands
ERASING COMMANDS
STOP
BUTTON
POWER ON
BUTTON
Release the buttons and the
display will flash SAVED twice
and the RF10 will automatically
return to normal operating mode
MACRO
BUTTONS
Press the CHANNEL ( ) UP
button to save. The display will
flash CLEAR and then SAVED
two times.
STEP 2:
IMPORTANT: You now have 30 seconds to
perform the next step while you are in
MACRO mode. If you don’t press a button
within 30 seconds, MACRO will disappear
from the screen, signaling that you have
exited erase mode and you will need to
start over.
Press and hold one of the
MACRO buttons (ON, OFF or one
of the 8 COMPONENT buttons)
and the MUTE button, until the
word “MACRO” is displayed on
the LCD screen.
STEP 2:
STEP 1:
STEP 1:
Erasing Macro Commands
Press and hold both the
POWER ON and the STOP
buttons for 10 seconds, until the
display flashes ERASE ten times
Erasing All Learned Commands in ALL Components
32
Erasing Commands
ERASING COMMANDS
ERASING COMMANDS
Re-setting RF10 to Original
Factory Default Settings
33
STOP
BUTTON
POWER OFF
BUTTON
The RF10 will then display a
self-testing routine for a few
seconds, then automatically
return to normal operating
mode.
Press and hold both the
POWER OFF button and the
STOP button for 10 seconds.
Continue to hold both buttons
as the display flashes ERASE
ten times, then RESET.
STEP 1:
NOTE: This process will essentially erase EVERYTHING
you have programmed into the RF10.
If you want to start with a clean slate, you can re-set the
RF10 its original factory default settings by performing the
following steps.
Re-setting RF10 to Original Factory
Default Settings
34
ERASING COMMANDS
35
The Optional PowerBlasterTM
POWERBLASTERTM
The RF10 sends radio signal to the PowerBlaster™, which is a
radio receiver.
NOTE:The RF10's radio signals will not control Components
directly.You must have a PowerBlaster™ to receive the RF10's
radio signals. Components that came with "no pointing"
radio remote controls cannot be operated by the RF10 unless
the Component can be switched to standard IR (Infrared
Control) via its internal menus. Some remote control ceiling
fans are radio only and cannot be operated by the RF10.
One of the best things about this is — nothing has to be
done to the RF10 for this feature to work. Every time you
press a button on the RF10, it sends both a standard IR
(Infrared Command) AND an RF (Radio Frequency) signal.
If you install the PowerBlaster™ kit, it will automatically
receive RF10’s radio signals and translate them into the
infrared commands that control your Components.
This changes everything! It enables you to control
Components that are completely out-of-sight, up to 100’
away. The PowerBlaster™ picks up RF10’s radio frequency
signals from any direction, regardless of distance, so RF10
doesn’t need to be pointed directly at any Component. Just
imagine – no more pointing! Now you can close your
entertainment center doors, hide your Components, and still
control them with ease. Control outdoor speakers on your
patio. Control your Components anywhere!
Of all the fabulous RF10 features, this is probably the most
exciting. When used in combination with the optional
PowerBlaster™, the RF10 becomes an amazing remote
control powerhouse that sends multi-directional RF (Radio
Frequency) signals that pass through walls, doors and
floors – both indoors and outdoors.
(for ‘barrier-free’ RF control) [Sold separately]
The Optional PowerBlaster™
Self-adhesive “flashers” (included in the PowerBlaster™
kit) affix to the front panels of your Components. The flashers relay infrared commands to Components out-of-sight of
the PowerBlaster’s front blaster. The flashers plug into
PowerBlaster’s rear flasher line output jacks. Each flasher
has a 10’ cable to easily reach Components on nearby
shelves.
The PowerBlaster™ converts radio signals to standard
infrared commands and sends them out via a built-in front
blaster to Components in the same cabinet space.
36
The Optional PowerBlasterTM
POWERBLASTERTM
37
Pre-Programmed Code Notes
PRE-PROGRAMMED CODE NOTES
X-BOX
IPOD
XM RADIO
LDP
DVR
VCR2
TV2
PHONO
TAPE
LIGHT
AUX
CABLE
VCR
TV
SAT
CD
DVD
AUDIO
Record the three digit codes for your system here:
Pre-Programmed Code Notes
Tape Decks, Lighting Controls, Multimedia PCs,
Xbox, iPod and Custom Installation Products
AUX
NOTE: Following the Code Tables are Command Locators.
Use the Command Locators to locate the additional
commands that are accessed via the SHIFT button.
CD Players and CD Changers
Satellite Receivers, TiVo, Replay and other DVR’s
Amps, Preamps, A/V Receivers and XM Radios
CD
SAT
AUDIO
VCRs and TV/VCR Combos
DVD Players and TV/DVD Combos
DVD
VCR
Cable TVs and Web TVs
TVs, Plasmas, Projectors and Monitors
CABLE
TV
Within each category, the code numbers are listed in rows by brand
(Sony, Panasonic, B & K, etc.). Some brands have more than
one three digit code for you to try. Just circle the correct row and
refer to it while you setup (step by step instructions for using
Pre-Programmed codes are found on page 7).
The RF10's Pre-Programmed code library is divided into categories
(TV, VCR, AUX, etc.). Each category actually includes many types of
Components. For example, the VCR category includes
TV/VCR combo units.
Pre-Programmed Code Tables
38
Pre-Programmed Code Tables
PRE-PROGRAMMED CODE TABLES
39
TV
CODE TABLES
GOLDSTAR
HALL MARK
HANNSPREE
HITACHI
HP
HYUNDAI
INFINITY
INFOCUS
INSIGNIA
JBL
JCPENNEY
JENSEN
JVC
KEC
EPSON
ESA
FISHER
FUJITSU
FUNAI
FUTURETECH
GATEWAY
GE
ADMIRAL
ADVENT
AKAI
A MARK
AMPRO
AMSTRAD
ANAM
AOC
APEX DIGITAL
AUDIOVOX
BARCO
BLAUPUNKT
BROKSONIC
CAIRN
CANDLE
CAPEHART
CETRONIC
CITIZEN
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
CROWN
CURTIS MATHES
CXC
DAEWOO
DAYTRON
DELL
DREAMVISION
DWIN
DYNASTY
DYNATECH
EIKI
ELECTROHOME
EMERSON
BRAND
072 081 161 160
247
197 146 248
112 143
167 073 157 183
052
043 054 056 080 112 131
197 004 112 058
006 310
076 273
233
088
238
201
197 002 003 004
058
043
197 002 003 004 043 101 103 143
043
004
043 050 051
143
043 054
043 143
197 101 004 143
043
004 016 043 044 076 103 114 125 127 143
004 143
319 320 321
235 345
177 257
043
062
187
143 024 076 196
028 048 043 155 005 197 004 047 050 051 076 096 143 151
153 154
324
323
007 057
198 246 346
028 043
043
242 268
160 144 165 073 197 008 009 034 056 074 130 155 161 004
091 157 183
113 116 102 004 106 112 119 127 143
004
381
011 163 166 004 009 010 012 023 075 143 158 072
316 327 378
337 338
164
230 330 333
350
164
004 024 197 008 009 030 065 101 143 156 160
013
038 034 070 083 145 199 210 240 241
043
CODE NUMBERS
MARANTZ
MATSUI
MAXENT
MEMOREX
METZ
MGA
MINERVA
MITSUBISHI
MTC
NAD
NEC
NIKEI
NUVISION
ONKING
ONWA
OPTOMA
OPTONICA
ORION
PANASONIC
PHILCO
PHILIPS
PIONEER
POLAROID
PORTLAND
PROSCAN
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROCTEC
RUNCO
SAMPO
SAMSUNG
SANYO
SCEPTRE
SCOTT
SEARS
SELECO
SHARP
SIEMENS
SIM2
SIGNATURE
SOLE
SONY
SOUNDESIGN
SPECTRICON
SSS
KENWOOD
KLOSS
KMC
KTV
LG
LODGENET
LOEWE
LOGIK
LUXMAN
LXI
MAGNAVOX
BRAND
197 070
002 059
143
043 197 143 154
113 116 102 004 106 112 119 127 143 243 284 363 365
072
164
072
004
166 007 015 052 081 160 164
164 059 197 003 060 061 004 063 064 127 022 160 094 239
226 273
197 164 184
164
242
007 072 004
088
197 004 024 028 042
088
109 124 024 004 028 040 042 146 191
197 004 062 101
015 025
132 130 134 197 040 016 024 056 019 236 237 262 272
043
351
043
043
265 270
019 081
096
034 056 080 092 164 208
197 003 059 060 064 164 004 024 056 063
164 005 093 038 197 003 004 059 127 184 206 239 259
135 025 197 018 023 116 190 234 335
138 268 328 353 354 356 388
004 143
144 160 161 165 167
004 131 058 143 171 173 193
034 056 092
019 004 143 043 127
160 165 065 156 144 161 197 004 024 056 152 023 074 333
007 019 043 047
186
168 169 178 179 180 181 182 183 073 157 340
197 058 004 202
050 089 101 105 004 127 143 160 228 229 258
166 007 020 053 057 082 187
276
028 043 004 048 143
015 030 004 007 028 057 143 094 160 082 165 166
189 200 205 227
081 019 014 170 028 029 004 022 143 175 251
088
189 200 205 227
072
231 232
070 139 147 126 185 194 085 213 277 279
028 004 003 043
112
004 043
CODE NUMBERS
40
TV
CODE TABLES
41
TV
CODE TABLES
SUPRE MACY
SVA
SYLVANIA
SYNTAX OLEVIA
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
TELEFUNKEN
TELERENT
TERA
TMK
TOSHIBA
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
VIZIO
VIEWSONIC
WARDS
WESTING HOUSE
WINBOOK
YAMAHA
YORK
YUPITERU
ZENITH
ZONDA
BRAND
002
328
197 003 059 060 063 064 164 044 160 127
376
081
056 062
034 080
004
002 003 004 024 028 043 072 101 143
037 046 086 087
072
172
004
015 138 030 007 040 062 101 325
143
008 009
146
174 184 188 192 340
004
386 387
242
004 008 009 019 028 060 061 063 064 072 074 143 164 034
076 280
339
197 004
004
043
073 072 095 103 157 183 243 284
112
CODE NUMBERS
ABC
ADELPHIA
ADVANCED NEWHOUSE
ALTRIO
AMERICAST
ARCHER
ARMSTONG
AT&T BROADBAND
ATLANTIC BROADBAND
BELL SOUTH
BLUE RIDGE
BRESNAN
BRIGHT HOUSE
BUCKEYE COMM
CABLEVISION
CENTURION
CENTURY
CHARTER
CITIZEN
COGECO
COMBANO
COMCAST
COMSAT
COX DIGITAL
DIGICABLE
EAGLE
EASTERN
ECHOSTAR
ELECTRICORD
GEMINI
GENERAL ELECTRIC
GENERAL INSTRUMENT
GNC
GOLDEN CHANNEL
HAMLIN
HITACHI
INSIGHT
JERROLD
MAGNAVOX
MASSILLON
MEDIA ONE
MEDICOM
MEMOREX
MITSUBISHI
MOTOROLA
MOVIE TIME
MOXI
NCTC
NSC
OAK
PACE
PANASONIC
PARAGON
PHILIPS
PIONEER
PRUCER
PULSAR
RCA
RCN
RECOTON
BRAND
004 103 003 039 042 046 053
043 074
043
043
099
005 007 014
074
074
043 074
099
043 074
074
043 110
074
043 074 108
092
007
043 074
007
074
080 081
043 074 110
074
043 074
101
020 030 040
057 066
106
032
008 054
072
074 103 104
099
030
049 050 055
103 055
074
074 004 103 002 003 008 009 010 069
010 012 064 079 095 094
074
107
074
052
102
074 110 109 111
028 032
111
074
015 028 038 071
031 037 053
043 074
044 047
052
006 012 013 020 085 095
043 103 034 051 063 076 105
059
052
047
074
098
CODE NUMBERS
42
CABLE/WEBTV
CODE TABLES
43
CABLE/WEBTV
CODE TABLES
REGAL
REGENCY
RODGERS
SAMSUNG
SCIENTIFIC ATLANTA
SEREN
SERVICE ELECTRIC
SHAW
SIGECOM
SONY
SPRUCER
STARCOM
STARGATE
SUSQUEHANNA
TIME WARNER
TOCOM
TOSHIBA
UNITED CABLE
UNIVERSAL
VIDEOTRON
VIEWSTAR
WIDE OPEN WEST
ZENITH
BRAND
049 050
057
043
030
043 011 003 041 042 045 046
043
074
074
043
096 108
047 078
002 004 008 009
008 030 097 104
043 074
043 074
039 040 056
052
004 053
005 007 014 032 035
043
012 015 018 086 087 088 089
043 099
052 060 093 100
CODE NUMBERS
AIWA
ALPINE
APEX DIGITAL
ARCAM
CAMBRIDGE AUDIO
CARY AUDIO DESIGN
CLASSE
COBY
DENON
FUNAI
GATEWAT
GE
GOVIDEO
HARMAN KARDON
HITACHI
ILO
INTEGRA
JVC
KENWOOD
KLH
KISS
KRELL
LEXICON
LG
LITEON
MAGNAVOX
MALATA
MARANTZ
MERIDIAN
MITSUBISHI
MYRYAD
NAD
NAKAMICHI
ONKYO
OPPO
PANASONIC
PHILIPS
PIONEER
POLAROID
PRIMARE
PROCEED
PROSCAN
RCA
RJTECH
ROTEL
SAMSUNG
SANSUI
SANYO
SENSORY SCIENCE
SHARP
SONY
SYLVANIA
SYMPHONIC
TAG MCLAREN
TATUNG
TEAC
THOMPSON
THULE
TOSHIBA
VENTURER
BRAND
146
098
087 111 115 112 116
122
215
174
167
258
007 080 173
143
175
026 027
137 218 220 221 222
084 140
101
268
142 180
012
151
135
179 279
104
148
091 057 074
264 265
066 096
267
083 095
153
017
102 134
088 155
103
076 035 180
266
021 042 138 139 144 150
066 083 095 105 166
023 092 099 107 108 131
233 234 237
193 194
086
026 027
026 027
269
204
056 070 119 165 170 137 159
154
147
222 223
094
033 118 145 126 191
143
143
156
102
270
026 027
177
035 034 130 141 164 188
149
CODE NUMBERS
44
DVD
CODE TABLES
45
DVD
CODE TABLES
161
042 089 166 195 197
057 074 091
146
143
165
143
143
130
143
144
143
164
137 218
150
105 (VCR Functions for VCR 067)
234
137 159
154
145 191
141
091 (VCR Functions for VCR171)
175
220 221 222
268
279
265
139
222
191
188
206 207
120
152 013
032 121
211
121
121
049 013
113
032
106 117 121
120
002
049
127
075
152 013
053 110
113
DVD-TV/DVD Combos
AIWA
FUNAI
SAMSUNG
SYLVANIA
SYMPHONIC
TOSHIBA
DVD-TV/DVD/VCR Combos
MAGNAVOX
PANASONIC
SYLVANIA
TOSHIBA
DVD-DVD/VCR Combos
GO VIDEO
PANASONIC
PHILIPS
POLAROID
SAMSUNG
SANSUI
SONY
TOSHIBA
ZENITH
DVD-DVD Recorder
GATEWAY
GO VIDEO
ILO
KISS
LITEON
PANASONIC
SENSORY SCIENCE
SONY
TOSHIBA
DVD-LD
DENON
FUNAI
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
OPTIMUS
PANASONIC
PHILIPS
PIONEER
RADIO SHACK
RCA
REALISTIC
RUNCO
SANYO
SHARP
SONY
TECHNICS
CODE NUMBERS
VINC
YAMAHA
ZENITH
BRAND
THETA DIGITAL
TOSHIBA
YAMAHA
BRAND
032
152 106
043 129
CODE NUMBERS
46
DVD
CODE TABLES
47
VCR
CODE TABLES
FISHER
FUNAI
GE
GO VIDEO
GOLDSTAR
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNEY
JENSEN
JVC
KENWOOD
LG
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
MTC
MULTITECH
NEC
NORDMENDE
OPTONICA
ORION
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RADIO SHACK
AIWA
AKAI
AMPRO
ANAM
AUDIO DYNAMICS
BROOKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
BRAND
034 161
016 146 043 046 124 125 142
072
031
012 023 039 043
035 037 129
028 031
108
003 040 135
031 041
111 116 117 119 005 007 010 065 108 110 112
108
012 023 039 043
034 053
059
006 029 035 017 025 027 031 034 036 037 046 101 129 131
138 153 162 116
003 010 008 009
034
031 072 147 063 107 109 144
132 136 155 040 115
101 106 114 013 020 012 123
012 045
004 026 150 018 034 043 063 137 160 013
031
031
012 013 015 040 066 101
043
048 043 130 150 055 060 012 031 050 152 166
014 048 034 047
101 106 114 013 020 012 123
034
034 003 009 017 106
040
067 031 034 068 041 156 164
067 069 012 031 156
101
027 030
031
101 003 010 014 031 034 053 072 102 134 139
045 046 059
013 020
059 061 151 013 020 045 046 051 142 049 168
034 040
024 034
012 023 039 043 048
043
053 054
025
066 070 145 083 133 140 157 163 074 167
013 020 031 063
031 034 067
031 067 034 101 054 071 156
101
021 013 048
108
072
002 014
066 145 075
123
CODE NUMBERS
107 109 144 147 158 041 145 013 020 140 034 040
003 008 010 014 031 034 040 053 054 101
058
148
014
102 104 113 115 112 120 032 040 066 107 109 122 125
022 043 048 135
003 010 007 014 134 102
017 037 112 129 131
003 008 010 014 081 013 101 009 017 073 112
149 054 031 159 165
024
034
056 057 058 077 052 003 078 076 031 149 154
034
013
031 034 059 067
034
010 034
039 043
034 039 043
031 070
031 019 034 101
034
006
112 131 079 008 059 047 082 013 042 081
040 101
040
012
048
012 034 046 141
040
003 013 017 024 031 034 040 053 054 131
012 034 039 043
072 080 056 048 101 034 058
005 117
153
034
101 123
034
101
101 123
034
034 067
101
070 167
034 067
123
034
101
057 154
067
034
034
034
VCR-TV/VCR Combos
DAEWOO
EMERSON
FUNAI
GOLDSTAR
HITACHI
JCPENNEY
LG
LLOYD
MAGNAVOX
MEMOREX
PANASONIC
PHILIPS
RADIO SHACK
RCA
SEARS
SONY
SYLVANIA
SYMPHONIC
THOMAS
ZENITH
CODE NUMBERS
RCA
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SIGNATURE
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
BRAND
48
VCR
CODE TABLES
49
AUDIO
CODE TABLES
EAD
EIGER
ELAN
ENLIGHTENED AUDIO
ESCIENT
FANFARE
FISHER
FLEXTRONICS
FOSGATE
FOSGATE AUDIONICS
GE
GOLDSTAR
HAFLER
HARMAN KARDON
HITACHI
IMERGE
INKEL
INTEGRA
JAMO
JBL
JCPENNEY
JEFF ROWLAND
JENSEN
JVC
ADC
ADCOM
AIWA
AKAI
AMC
AMEND
AMX
ANGSTROM
ANTHEM
ARCAM
ATLANTIC TECHNOLOGY
AUDIO ACCESS
AUDIO ALCHEMY
AUDIO DESIGN
AUDIO EASE
AUDIO FILE
AUDIO MATRIX
AUDIO SOURCE
AUDIO TECHNICA
B&K
BOSE
BOSTON ACOUSTICS
BRYSTON
CAMBRIDGE AUDIO
CARVER
CASIO
CHIRO
CINEMA SOUND
CITATION
CLARION
CLASSE
COMPAQ
CURTIS MATHES
DELPHI
DENON
BRAND
007
082 092 225 161 269 355 356 366
170 018 104 202 203 213 211 188
138 189
125 126 127 128 258 281 282 038
054
196
142
335 336 337 338 339
141 418 419
342
147
135
194 221 011
021 196 207
071
167
273
134
096 097
070 170 224 347 409 459 460 532
447
023
522
006 028 061 071 201 214 226 180 185 022 029 077 284
076
140
034 134
148 272
026
537
382
076
415 515
002 034 109 215 229 230 027 037 234 259 330 340 341 349
350 400 401 402 444 564
466
149
057 290
099 098
368 381 451 452 453 454
352
047 214 180 182 297
378
062 231
342
056 260
008
174
231 233 254 153 154 118 121 227 277 317 318 365
020
371
197
354 438
398
263
076 216
206
058
240 163 191 114 266 279 291
CODE NUMBERS
SOUNDESIGN
SOUNDMATTERS
SOUNDSTREAM
SSI
SUMO
SUNFIRE
TAEKWANG
TEAC
TECHNICS
THETA DIGITAL
KINERGETICS
KLH
KOSS
KRELL
KYOCERA
LEXICON
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MERIDIAN
MITSUBISHI
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NILES
NIRO
ONKYO
OPTIMUS
OUTLAW
PANASONIC
PARASOUND
PHAST
PHILIPS
PIONEER
POLKAUDIO
PRIMARE
PROCEED
RCA
REALISTIC
REQUEST
REVOX
ROTEL
RUSSOUND
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHERWOOD
SONY
KENWOOD
BRAND
026 066 145 146 181 190 197 192 182 199 151 222 180 005
280 374 550
220 140
331
216 573
150 072 376 384
007
120 235 236 237 357 358 359 360 361 362 363 364
124 377
137 139 052 165 115 004 009
076 056
086 164 152 208
006 028 031 040 063 185 186 251 265 119 289 296 492
238 286
076
100 012 013
242 243 204
157 158 042 043 081 112
276 293
186 113 283 478 479
111 244 245 172 183 287
176
403
343
017 046 064 107 108 187 079 080 090 179 209 270 275 438
026 041 138
342
032 195 219 177 292 383 516
129 130 132 261 294 295 333 334
196
249 250 251 063 119
014 033 039 044 045 050 069 159 168 116 035 078 198 480
029 515
464
144 268
010 048 117 156 067 288
019 056 073 075 095
351
162
074 083 085
379 391 392
016 571
040 048 110 119 065 228
047 059
019 091
076
026 094 131 175 181
024 038 055 102 103 105 106 051 030 447
018 093 223 247 248 160 166 015 101 184 218 271 353 369
372 380 417 421
036
375
084 088
068
171
344 345 346 494
138
005 019 049 111 212 217
122 176 193 219 178 177 200 257 262
136
CODE NUMBERS
50
AUDIO
CODE TABLES
51
AUDIO
CODE TABLES
AUDIO-XM Radios & Tuners
BOSE
DELPHI
FANFARE
KENWOOD
POLKAUDIO
SONY
ZENITH
TOSHIBA
WARDS
YAMAHA
BRAND
170 532
415 515
352
550
515
380
060 087 198 278
180
026 253 169 067 173 205 264 232 089 264 274 285 332 373
432 433
143 210
CODE NUMBERS
ELECTROHOME
EUROSAT
EXPRESSVU
FUJITSU
GENERAL ELECTRIC
GENERAL INSTRUMENT
GOI
HITACHI
HOME CABLE
HOUSTON TRACKER
HTS
HUGHES
HYTEK
HYUNDAI
ICR
JANIEL
JVC
KATHREIN
LEGEND
LG
LUTRON
LUXOR
MACOM
MAGNAVOX
MARANTZ
MEMOREX
MITSUBISHI
MOTOROLA
NEXT LEVEL
NEXTWAVE
NORSAT
PACE
PANASONIC
PANSAT
PAYSAT
PERSONAL CABLE
PHILIPS
PL
PRESIDENT
PRIMESTAR
PROSAT
PROSCAN
RADIOSHACK
RCA
REALISTIC
ALPHASTAR
AMPLICA
BIRDVIEW
BSR
CABLEVISION / VOOM
CAPETRONICS
CHANNEL MASTER
CHAPARRAL
CITOH
CURTIS MATHES
DIRECTV
DRAKE
DX ANTENNA
ECHOSTAR / DISH
BRAND
123
050
129 113 051 126
053
148
053
013 014 015 018 036 055
008 009 012 077
054
050
173
005 006 007 010 011 112 116 141 052
056 024 046 076
122 038 040 057 058 093 094 095 096 097 098 099 100 167
168
089
114
122
017 021 022 027 133 134
151 106 150
003 004 016 029 031 059 101 148
122
139 140
080 044 029
033 037 039 104 057 051
122
161 162 068 154 165 166
053
149
023
147
122
108
057
170
132
144 062
059 010 063 064 065
136
152 153
057 136
068 154
148
148
028 124 125
069 070
143
142 160
121 172
136
117
152 153 156 068 154 136
023 026
019 102
110 030
072
151 106 150
148
151 106 150
043 074
CODE NUMBERS
52
SAT
CODE TABLES
53
SAT
CODE TABLES
SAT-DVR, TIVO
DISH
ECHOSTAR
HUGHES
JVC
PHILIPS
RCA
REPLAY NETWORKS
SONY
TIVO
TOSHIBA
VIEWSTAR
WINEGARD
ZENITH
SAMSUNG
SATELLITE SERVICE
SKY
SONY
STARCAST
STAR CHOICE
SUPERGUIDE
TEECOM
TOSHIBA
TOWN & COUNTRY
UNIDEN
BRAND
122
122
205 207
122
205 202 207
206
201
203 204
202 207
207
123 155 163 169 175
028 035 047 085
164
103
041
148
020 124 125
023 026 075 087 088 090 107 130 137
127 068 154 157 158
023 026
016 025 042 043 044 045 048 049 078 079 080 086 101 135
136
115
128 146
159
CODE NUMBERS
ADCOM
AIWA
AKAI
AMC
AMEND
ARCAM
AUDIO ACCESS
AUDIO EASE
AUDIO TECHNICA
BSR
CALIFORNIA AUDIO
CAPETRONIC
CARRERA
CARVER
CASIO
CLARINETTE
CREEK
CROWN
DENON
EMERSON
FISHER
FRABA
GENEXXA
GOLDSTAR
HAITAI
HARMAN KARDON
HITACHI
INKEL
JCPENNEY
JENSEN
JVC
KENWOOD
KOSS
KRELL
KYOCERA
LOTTE
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
MISSION
MITSUBISHI
MITSUMI
MODULAIRE
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NIKKO
NSM
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHILIPS
PIONEER
BRAND
062 042
059 065 088 089 105 122 170 187
085 195 202
231 232
118
238
119 147
165
046
037 057
103 008
063
057 080
185 041 044 050 086 107 130 134 135 138 139 203 204 167
111 182
182
159
035
002 123
042 069 102
050 185 134 008
111
010 069 102
080
093
018 033 047 208
042 175
130 143 144
014 061 092 141
158
004 022 136 163 213 214 242 243
185 007 023 055 071 072 142 137 254
061
241
005
102
011 028 070 076 249 252
059
044 107
027 041 044 051 077 107 209 246
212 247
014 073 092
010
044 107
179
153
182
147
244 155
006 005 067 178
217 218 219 095
014 062
046
044 107
030 038 039 168 169
010 050 057 058 081 082 083 085 093 195
103 201 172 008 068 248
233 240
041 044 107 246 253
010 020 025 056 174 175 176
CODE NUMBERS
54
CD
CODE TABLES
55
CD
CODE TABLES
PROCEED
PROTON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROTEL
SAE
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SIGNATURE
SONY
SOUNDESIGN
SUMO
SYLVANIA
SYMPHONIC
TAEKWANG
TANDY
TEAC
TECHNICS
TECHWOOD
THETA DIGITAL
TOSHIBA
VECTOR RESEARCH
VICTOR
WARDS
YAMAHA
YORX
BRAND
239
044 107 228
103 008
182
017 042 150
042 050 051 102 181 182 187
044 107 161 178 250
044 107
044 069 107 128 171 190 125
050
069 102
026 031 051 066
003 019 051 096 112 115 119 166
033
048 081 097 126 133 177 225 226 164
251
155
044 107
052 181
195 085
010
015 034 036 051 052 101 131 140 079
060 103 200 172 184 008 068
076
234 235
006 067 091 160 148
080
004 022 114 124
185 033
024 046 054 186 183 245
182
CODE NUMBERS
152
164
401
155
220
191
409
221
213 214 215 216 217 218
261 262
156
204
097
080 253
206
151
184
209
261 262
294 295
261 262
219
153
185
185
406
297
208 257
158 159 077
186 201
408 107
205
160 187
161
085
162
081
163 156
082
207
078 079
164 165 166 261 262
153
167
203
183 093
168 169 170 171 172 188 189
015 071 100 114
006 008 027 024 036
105 227 229
064
011
233
106 116 239 240
005 013 023 026 064 145 146 181 190
124
035 137 139
027
AUX-TAPE
AIWA
CARVER
DENON
FISHER
GOLDSTAR
HARMAN KARDON
JVC
KENWOOD
LINN
LUXMAN
MAGNAVOX
CODE NUMBERS
3M
AIWA
APPLE/iPod
ARCHER
AURORA MULTIMEDIA
AUTON
BOSE
CELADON
CRESTRON
DELL
DMX
DRAPER SCREEN
DREAMVISION
DWIN
EVERQUEST
EXTRON
FAROUDJA
FUJI
GATEWAY
HAUPPAUGE
HP
HUNTERDOUGLAS
JERROLD
JVC
KENWOOD
KENSINGTON
KEYSPAN
LITE-TOUCH
LUTRON
MAKITA
MICROSOFT/XBOX
MINDPATH
NILES
NSM
PIANO DISC PLUS
POLKAUDIO
RUSSOUND
SCIENTIFIC ATLANTA
SIMA
SOLO ELECTRONICS
SOMFY
SONY
STARCOM
TURBOSCAN
VELODYNE
X-10
XANTECH
BRAND
56
AUX
CODE TABLES
57
AUX
CODE TABLES
014 027 056 065 087
238
242 243
029 048
244 245 025
002 012 016 017 018 019 115
026 054 055
007 010 032 088 195
027 087
003 039 047 050 066 098 222
007 088
027 113 119 224
026 057 131 175 181
038 004 028 030 033 034
020 022 052 084 089
009 059 212
007 010 076 088 109 122 193
112
106
021 026 031 067 040
261 262
261 262
294 295
261 262
297
261 262
261 262
261 262
408 107
401
409
406
AUX-Media PC Controls
DELL
GATEWAY
HAUPPAUGE
HP
KEYSPAN
SONY
TOSHIBA
WINBOOK
AUX - XBox Controls
MICROSOFT/XBOX
AUX-iPod Controls
APPLE/iPod
BOSE
KENSINGTON
CODE NUMBERS
MARANTZ
MCINTOSH
MITSUBISHI
NAD
NAKAMICHI
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
QUASAR
SANSUI
SHARP
SHERWOOD
SONY
TEAC
TECHNICS
TOSHIBA
VICTOR
YAMAHA
BRAND
POWER/OFF
POWER/ON
VOL+
VOLMUTE
CH+
CHPREV CH
TV/VCR
MENU
CH GUIDE
DISPLAY
CANCEL
UP
DOWN
SELECT
LEFT
RIGHT
10
ENTER
PIP ON/OFF
PIP SWAP
PIP POSITION
PIP CH+
PIP OFF
PIP SIZE
PIP FREEZE
PIP CHINPUT/ANT
CAPTION
AUTO CH
SOUND
RESET
ADD
DELETE
SLEEP
RATIO
RGB INPUT
COMPONENT
MODE
WIDE
S-VIDEO INPUT
VIDEO1 INPUT
VIDEO2 INPUT
COMMAND
OFF
ON
VOL+
VOLMUTE
CH+
CHPREV CH
TV/VCR
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press TV/VCR button.
Press SHIFT first, then press MENU button.
Press SHIFT first, then press GUIDE button.
Press SHIFT first, then press INFO button.
Press SHIFT first, then press EXIT button.
Press SHIFT first, then press UP button.
Press SHIFT first, then press DOWN button.
Press SHIFT first, then press 1/SLEEP button.
Press SHIFT first, then press 2/6.7CH button.
Press SHIFT first, then press 3/TEST button.
Press SHIFT first, then press 4/THX button.
Press SHIFT first, then press 5/DD button.
Press SHIFT first, then press 6/DTS button.
Press SHIFT first, then press 7/LOGIC button.
Press SHIFT first, then press 8/ST button.
Press SHIFT first, then press 9/SURR button.
BUTTON LOCATION
58
TV Locations
COMMAND
59
CABLE Locations
COMMAND
POWER/OFF
POWER/ON
VOL+
VOLMUTE
CH+
CHLAST
BYPASS
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP
PLAY
PAUSE
10
ENTER/MUSIC
FAV
DAY+
PAGE+
HELP
LOCK/PPV
DAYPAGESETTINGS
RECORD
COMMAND
OFF
ON
VOL+
VOLMUTE
CH+
CHPREV CH
TV/VCR
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press STOP/REC button.
Press SHIFT first, then press 1/SLEEP button.
Press SHIFT first, then press 2/6.7CH button.
Press SHIFT first, then press 3/TEST button.
BUTTON LOCATION
POWER/OFF
POWER/ON
SKIP+
SKIPEJECT
MENU
PROGRAM
DISPLAY
CLEAR
UP
DOWN
SELECT
LEFT
RIGHT
SCAN- / REW
SCAN+ / FF
STOP
PLAY
PAUSE
10
ENTER
REPEAT
A/B REPEAT
RANDOM
RETURN
TITLE
TIME
MEMO
AUDIO
STEP+
STEPTOP MENU
SETUP
SEARCH
SLOWSLOW+
REC
ANGLE
SUB ON/OFF
SUBTITLE
PICTURE
SURR
ZOOM
COMMAND
OFF
ON
CH+
CHPREV CH
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press CH+ button.
Press SHIFT first, then press CH- button.
Press SHIFT first, then press MENU button.
Press SHIFT first, then press GUIDE button.
Press SHIFT first, then press INFO button.
Press SHIFT first, then press REW button.
Press SHIFT first, then press FF button.
Press SHIFT first, then press STOP/REC button.
Press SHIFT first, then press 1/SLEEP button.
Press SHIFT first, then press 2/6.7CH button.
Press SHIFT first, then press 3/TEST button.
Press SHIFT first, then press 4/THX button.
Press SHIFT first, then press 5/DD button.
Press SHIFT first, then press 6/DTS button.
BUTTON LOCATION
60
DVD Locations
COMMAND
61
VCR Locations
COMMAND
POWER/OFF
POWER/ON
VOL+
VOLMUTE
CH+
CHPREV CH
VCR/TV
MENU
GUIDE
DISPLAY
CANCEL
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP
PLAY
PAUSE
10
SLOW
SLOW+
TRK+
PROGRAM
AUTO TRK
SLOWTRKRESET
INPUT
RECORD
X2 PLAY
EJECT
SLEEP/TIMER
CLOCK/COUNT
COUNT RESET
AUTO CH
F.ADV
VCR PLUS
INDEX
ADD
DELETE
TAPE SPEED
COMMAND
OFF
ON
VOL+
VOLMUTE
CH+
CHPREV CH
TV/VCR
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press TV/VCR button.
Press SHIFT first, then press STOP/REC button.
Press SHIFT first, then press PLAY button.
Press SHIFT first, then press PAUSE button.
Press SHIFT first, then press 1/SLEEP button.
Press SHIFT first, then press 2/6.7CH button.
Press SHIFT first, then press 3/TEST button.
Press SHIFT first, then press 4/THX button.
Press SHIFT first, then press 5/DD button.
Press SHIFT first, then press 6/DTS button.
Press SHIFT first, then press 7/LOGIC button.
Press SHIFT first, then press 8/ST button.
Press SHIFT first, then press 9/SURR button.
Press SHIFT first, then press 0/TAPE2 button.
BUTTON LOCATION
POWER/OFF
POWER/ON
VOL+
VOLMUTE
PRESET+
PRESETSCAN
BAND,FM/AM
MODE
DISPLAY
OSD
CLEAR
UP
DOWN
SELECT
LEFT
RIGHT
SCAN- / REW
SCAN+ / FF
STOP
PLAY
PAUSE
10
ENTER
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARTUNER Input
CD Input
DVD Input
AUX Input
Video 3 Input
Video 2 Input
Video 1 Input
TAPE Input
HALL
THEATER
CATHEDRAL
PARTY
NIGHT CLUB
CHURCH
JAZZ
DISCO
OPERA/ARENA
COMMAND
OFF
ON
VOL+
VOLMUTE
CH+
CHPREV CH
TV/VCR
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press AUD button.
Press SHIFT first, then press CD button.
Press SHIFT first, then press DVD button.
Press SHIFT first, then press AUX button.
Press SHIFT first, then press SAT button.
Press SHIFT first, then press TV button.
Press SHIFT first, then press VCR button.
Press SHIFT first, then press CBL button.
Press SHIFT first, then press MENU button.
Press SHIFT first, then press GUIDE button.
Press SHIFT first, then press INFO button.
Press SHIFT first, then press EXIT button.
Press SHIFT first, then press UP button.
Press SHIFT first, then press DOWN button.
Press SHIFT first, then press SELECT button.
Press SHIFT first, then press LEFT button.
Press SHIFT first, then press RIGHT button.
BUTTON LOCATION
62
AUDIO Locations
COMMAND
63
AUDIO Locations
COMMAND
REC
SLEEP
5/6/7 CH
TEST
THX
DOLBY DIGITAL
DTS
LOGIC 7
STEREO
SURR
TAPE2 Input
Video 4 Input
PHONO Input
BASS+
TREBLE+
SURR+
DELAY+
BASSTREBLESURRDELAY-
COMMAND
Press SHIFT first, then press STOP/REC button.
Press SHIFT first, then press 1/SLEEP button.
Press SHIFT first, then press 2/6.7CH button.
Press SHIFT first, then press 3/TEST button.
Press SHIFT first, then press 4/THX button.
Press SHIFT first, then press 5/DD button.
Press SHIFT first, then press 6/DTS button.
Press SHIFT first, then press 7/LOGIC button.
Press SHIFT first, then press 8/ST button.
Press SHIFT first, then press 9/SURR button.
Press SHIFT first, then press 0/TAPE2 button.
Press SHIFT first, then press +10/VCR4 button.
Press SHIFT first, then press ENT/PH button.
Press SHIFT first, then press MODE+ button.
Press SHIFT first, then press SUB+ button.
Press SHIFT first, then press CENTER+ button.
Press SHIFT first, then press REAR+ button.
Press SHIFT first, then press MODE- button.
Press SHIFT first, then press SUB- button.
Press SHIFT first, then press CENTER- button.
Press SHIFT first, then press REAR- button.
BUTTON LOCATION
POWER/OFF
POWER/ON
VOL+
VOLMUTE
CH+
CHPREV CH
INPUT/ANT
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP
PLAY
PAUSE
10
ENTER
FAV
SEARCH
FETCH
VIDEO
ALT AUDIO
PROGRAM
HELP
INTERACTIVE
RECORD
COMMAND
OFF
ON
VOL+
VOLMUTE
CH+
CHPREV CH
TV/VCR
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press STOP/REC button.
BUTTON LOCATION
64
SAT Locations
COMMAND
65
CD Locations
COMMAND
POWER/OFF
POWER/ON
TRACK+
TRACKEJECT
RANDOM
EDIT
PROGRAM
DISPLAY
CLEAR
UP
DOWN
SELECT
LEFT
RIGHT
SCAN- / REW
SCAN+/ FF
STOP
PLAY
PAUSE
10
ENTER
DISC1
DISC2
DISC3
DISC SKIP+
DISC4
DISC5
DISC6
DISC SKIPREPEAT
INTRO
DISC
TIME
COMMAND
OFF
ON
CH+
CHPREV CH
TV/VCR
MENU
GUIDE
INFO
EXIT
UP
DOWN
SELECT
LEFT
RIGHT
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press 1/SLEEP button.
Press SHIFT first, then press 2/6.7CH button.
Press SHIFT first, then press 3/TEST button.
Press SHIFT first, then press 4/THX button.
BUTTON LOCATION
POWER/OFF
POWER/ON
VOL+
VOLMUTE
(A)REW
(A)FF
(A)STOP
(A)PLAY
(A)PAUSE
10
ENTER
(B)FF
(B)PLAY
(B)PLAY BACK
DECK A
(B)REW
(B)STOP
(B)REC
DECK B
(A)REC
(A)PLAY BACK
DIRECTION A
DIRECTION B
COMMAND
OFF
ON
VOL+
VOLMUTE
REW
FF
STOP/REC
PLAY
PAUSE
1 / SLEEP
2 / 6.7 CH
3 / TEST
4/ THX
5 / DD
6 / DTS
7 / LOGIC
8 / ST
9 / SURR
0 / TAPE 2
+10 / VCR 4
ENT / PH
MODE+
SUB+
CENTER+
REAR+
MODESUBCENTERREARPress SHIFT first, then press STOP/REC button.
Press SHIFT first, then press PLAY button.
Press SHIFT first, then press REAR+ button.
Press SHIFT first, then press REAR- button.
BUTTON LOCATION
66
AUX Locations
COMMAND
67
Frequently Asked Questions
FAQ’s
LCD Size: 1.25” x 0.5”
Call us at 1-914-835-4484
Monday - Friday, 9AM to 6PM (EST)
The Universal Remote Control Technical Support and Customer
Service staff are ready to answer any questions you might have.
Who can I call for more answers?
Batteries: Four AAA Alkaline batteries included
No. The RF10 stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your
convenience, and the RF10 would still remember your settings.
Size: 8.5” x 2.5” x 1”
Weight: 7.1 oz. (with batteries)
RF Frequency: 418MHz
RF Range (radio frequency): 50 to 100 feet, depending upon
the environment
IR Range (Line of Sight via Infrared): 30-50 feet, depending on
the environment
Macro Capability - 10 Macros of up to 50 steps each
Learning Capability - 704 IR commands at standard frequencies
(15kHz to 100kHz)
Specifications
If the batteries run out, will I lose my settings?
Instead of pressing all of those buttons one at a time, the RF10
enables you to setup one button that does all those steps
automatically with one press. For more information on how and why
you should setup macro buttons, watch the Quick Setup DVD
Program Guide or refer to pages 19 - 20 in this Manual.
A “macro” is a button on the RF10 that you setup to make a lot of
things happen when you press it. For example, to watch a DVD in
most home theaters requires several remote controls and many button
presses (power up the TV, power up the surround sound, power
up the DVD player, set the TV to the correct video input, set the surround
sound to the correct audio input and finally; press play on the
DVD player remote control).
What is a “macro” button?
No, the RF10 is only programmed by the methods explained in this
manual and the Quick Setup DVD Guide.
Can I program the RF10 on a computer?
The RF10 has an extra “hidden” command (usually a power user or
hobbyist feature) on some of your buttons. This command is issued
instead of the normal command if you press the SHIFT button first.
Once you have pressed the SHIFT button, the display will flash for
ten seconds. If you press it by accident, you can stop the SHIFT
flashing by pressing the SHIFT button or the LIGHT button.
Why does the display flash at me sometimes?
- Damage from misuse, neglect, or acts of nature
- Products that have been modified or incorporated into
other products
- Products purchased more than 12 months ago
- Units purchased from unauthorized dealers or
companies
Universal Remote Control’s MastercontrolTM RF10 is covered against any manufacturers defects or workmanship
for a period of one year from the date of purchase if purchased from an authorized Universal Remote Control dealer. Units purchased from online auction sites or other
unauthorized resellers have no warranty. This warranty
does not cover the following items:
Why does the display change whenever you press the
buttons at the top of the remote?
The RF10 is actually eight remote controls in one. The LCD display
shows you which of your components it is currently set to control.
When you press one of the eight COMPONENT buttons (those
labeled AUDIO, CD, DVD, etc.), the RF10 changes the functions of all
of other buttons to control that component.
Warranty
Frequently Asked Questions
68
Warranty/Specifications
WARRANTY/SPECIFICATIONS
OCE-0046A_rev01
www.universalremote.com
500 Mamaroneck Avenue
Harrison, NY 10528
Phone: 1-914-835-4484
FAX: 1-914-835-4532

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 37
Language                        : EN-US
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6dd83a95-0f93-4d90-a15a-a38a9cb849e5
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : emc센터
Source Modified                 : D:20060425110357
Headline                        : 
Create Date                     : 2006:04:25 20:04:00+09:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2006:04:25 20:04:21+09:00
Metadata Date                   : 2006:04:25 20:04:21+09:00
Document ID                     : uuid:f18cdfc3-267a-41f3-ae39-fe3bb0cd61a1
Version ID                      : 14
Format                          : application/pdf
Title                           : EMISSION TEST REPORT
Creator                         : 최선미
Subject                         : 
Tagged PDF                      : No
Author                          : 최선미

EXIF Metadata provided by EXIF.tools