Ohsung Electronics URC9000LRF RF Remote Controller User Manual EMISSION TEST REPORT

Download:
Mirror Download [FCC.gov]
Document ID	1447192
Application ID	lbnzQh8nYZ02FMBtNNOHtw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	59.93kB (749093 bits)
Date Submitted	2011-04-12 00:00:00
Date Available	2011-05-27 00:00:00
Creation Date	2011-04-11 19:47:15
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2011-04-11 19:48:33
Document Title	EMISSION TEST REPORT
Document Creator	Microsoft® Office Word 2007
Document Author:	최선미

Order Number
: GETEC-C1-11-075
FCC Part 15 subpart C
Test Report Number
: GETEC-E3-11-025
Page 1 / 1
APPENDIX I
: USER’S MANUAL
EUT Type: RF REMOTE CONTROLLER
FCC ID.: OZ5URC9000LRF
Operating Instructions For
PHAZR-5
Cable Remote Control
UR5L-9000LRF & UR5L-9020LRF
1 Introduction
4 Button Functions
The PHAZR-5 UR5L-9000LRF & UR5L9020LRF is designed to operate the CISCO
/ SA, Pioneer, Pace Micro, Samsung and
Motorola digital set tops, Plus the majority
of TV, AUD, DVD and AUX equipment on
the market as shown below.
CBL : Cable Set-top Box
TV : Televisions
AUD : Audio Receivers
DVD : DVD Players
AUX : Media PC, Gaming System, etc.
2 Replacing Batteries
A. Quick Set-Up Method
STEP1 Turn on the equipment you want to program. To program your TV, turn on the TV.
STEP2 Point the remote at the component and press
and hold the [DEVICE] key for 3 seconds until the
Device LED blinks off and turns back on.
Continue holding the [DEVICE] key and press the
number keys, one at a time, starting with 1, then
2, 3...0. Stop pressing the number keys when the
device turns off.
STEP3 Release the [DEVICE] key to save the code. The
Device LED will blink twice to confirm the code is
stored.
Repeat the steps above for all components (TV, AUD,
DVD, AUX).
B. Pre-Programmed 3-Dight Code Method
STEP1 Turn on the equipment that you want the remote
control to operate (Cable Box, TV, DVD, etc.).
STEP2 Press the [DEVICE] button and the [OK/SEL] button
simultaneously for three seconds. The corresponding device LED will turn on indicating that it
is ready to be programmed. The LED will remain
on for 30 seconds. The next step must be entered
while the LED is on.
STEP3 Point the remote control toward the equipment
and enter the three-digit code number assigned
to your brand from the code tables. If there are
more than one three-digit number listed for your
brand, try one code number at a time until your
equipment turns off.
*Note : You can verify that you have selected the correct
code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.)
to ensure you have the correct code. If any of the
functions do not operate as they should, repeat the
instructions from STEP 3 above using the next
three digit code number from the brand list.
Before you program or operate the remote control,
you must install two new AA alkaline batteries.
STEP1 Remove the battery compartment cover
on the back of your remote control.
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3 Replace the battery compartment cover.
STEP4 Store the three-digit code by pressing the same
[DEVICE] button once again. The device LED will
blink twice to confirm that the code has been
stored.
5 Programming the Remote Control
3 Operations
Universal Remote Control, Inc.
www.universalremote.com
OCE-0087C Rev 01 (04/01/11)
DEFAULT STATE:
Device Default: Cable Set-Top Box (STB)
Channel Default: CABLE channel and numbers
through the CABLE STB. You have the option of
controlling your CABLE channel and numbers
through the TV or AUD. Refer to section K for
programming steps.
Volume Default: Volume and Mute control are
automatically transferred to the respective
Component based on the Device selected:
CBL:Cable Set-Top Box ; TV:TV ; AUD:AUD.
DVD:TV ; AUX:AUX. You have the option of
controlling CABLE Volume and Mute through
the TV, DVD or AUD. Refer to section J for
programming steps.
IMPORTANT SETUP NOTE!
In this section when you are instructed to press a [DEVICE] button, that means to press either the CBL, TV, AUD,
DVD or AUX button, depending on what device you are programming the remote to operate.
There are five ways you can program your remote:
* Quick Set-Up Method
* The Pre-Programmed 3-Digit Code Method
* The Auto-Search Method
* The Learning Method
* RF Setting Method
The Quick Set-Up Method is a unique feature that enables the fastest and easiest setup by using a 1 digit
code. This is the quickest way to set up devices made by popular manufacturers.
The Pre-Programmed Code Method allows you to setup all of the buttons at once by entering 3-digit
code numbers that correspond with the components manufacture/brand. Code tables for this method
are on the backside of the operating instructions.
The Auto-Search Method scans through all of the codes in the remote control, one at a time allowing you
to identify the correct code.
The Learning Method allows you to transfer functions from other remotes to the PHAZR-5one button at a time.
IMPORTANT SETUP NOTE!
This pertains to all programming steps. When you are in setup mode the device LED will light for 30 seconds. If you do
not press a button within 30 seconds, the LED light will turn off and exit setup mode, and you will need to start over.
C. Auto-Search Method
If none of the three digit code numbers assigned to your
brand of equipment works, or the code table does not list
your brand, you can use the Auto Search Method to find the
correct three-digit code number for your equipment by following steps:
STEP1 Turn on the equipment that you want the remote
control to operate (Cable Box, TV, DVD, etc.).
STEP2 Press the [DEVICE] button and the
[OK/SEL] button simultaneously for three
seconds. The device LED will turn on indicating that it is ready to be
programmed. The LED will remain on for
30 seconds. The next step must be entered
while the LED is on.
STEP3 Press the [CH ] or [CH ] button one at a time or
keep it pressed. The remote will emit a series of
Power ON/OFF code signals. Release the [CH ] or
[CH ] button as soon as the equipment turns off.
*Note : You can verify that you have selected the correct
code by pressing the [POWER] button. The equipment should turn back on. Then try all of the functions on the remote control (i.e. volume, mute, etc.) to
ensure you have the correct code. If any of the functions do not operate as they should, repeat the
instructions from STEP 3 above to continue the Auto
Search Method.
STEP4 Press the same [DEVICE] button to store the code.
The Device LED will blink twice to confirm that the
code has been stored.
D. The Learning Method
STEP1 Press the [DEVICE] button (TV,AUD, DVD, or AUX) to
be programmed and the [ASPECT] buttons simultaneously for 3 seconds until the Device LED light turns
on.
STEP2 Line up the PHAZR-5 to the remote control you
want to "learn" from, head-to-head, 1 or 2 inches
apart.
STEP3 Press the button on the PHAZR-5 that you want
to teach a command to. For example, press the
[MUTE] button to learn a command to the
[MUTE] button.
STEP4 Press and hold the button on the other remote that
corresponds to the command you want to teach
until the PHAZR-5Device LED light blinks twice.
*Note : The LED will blink 5 times if there was an error
in the learning process. Repeat STEPS 3 and 4
if this occurs. Continue learning other buttons
by repeating STEPS 3 and 4.
STEP5 Once you have completed teaching the PHAZR5 all desired commands for the component, save
the learned commands by pressing the [DEVICE]
and [ASPECT] buttons simultaneously until the
Device LED blinks 3 times. Now test all of the
buttons to make sure they operate correctly.
E. Erasing a Single Learned Command
STEP1 Press the [DEVICE] and [ASPECT] buttons simultaneously for 3 seconds until the Device LED light
turns on.
STEP2 Press and hold the button you want to erase for
3 seconds. The Device LED will blink twice to
confirm the erasure.
STEP3 To exit, press and hold both the [DEVICE] and
[ASPECT] buttons simultaneously until the
Device LED blinks 3 times.
F. Erasing All Learned Commands from One Device
STEP1 Press the [DEVICE] and [ASPECT] buttons simultaneously for 3 seconds until the Device LED light
turns on.
STEP2 Press and hold both the [DEVICE] button you want
to erase and the [PAUSE] button for 5 seconds.
The Device LED will blink twice to confirm the erasure.
STEP3 To exit, press and hold both the [DEVICE] and
[ASPECT] buttons simultaneously
G.To Identify the 3-Digit Code Programmed for a
Device
STEP1 Press the appropriate [DEVICE] button and the
[OK/SEL] button simultaneously for three seconds. The device LED will turn on for 30 seconds.
The next step must be performed while the LED
is on.
STEP2 Press the [INFO] button. The device LED will blink
a number of times indicating the number of each
digit for the code. Each digit is separated by a one
second interval of the LED being off.
Example :One blink, (pause) three blinks, (pause) eight
blinks indicates the code number 138.
*Note : Ten blinks indicates the number 0.
H. Programming the AUX Device
You can take advantage of the AUX function to program a
devices such as a media PC, gaming console or satellite
radio receiver. Follow the instruction in section B to program an AUX device. You can also program the AUX button for a second TV, DVD or Audio Device. To do this follow the instructions below.
STEP1 Turn on the 5th device you want to program (TV,
AUD, DVD, etc.).
STEP2 Press the [AUX] button and the [OK/SEL] button
simultaneously for 3 seconds. The [AUX] device
LED will turn on for 30 seconds.
STEP3 Press the [Device] button For the type of device you
want to setup. Point the remote control toward the
device and enter the 3-digit code number assigned to
your brand.
*Note : To program a second TV press TV, etc.
STEP4 When the equipment turns off verify that you
have selected the correct code by pressing the
[POWER] button. The equipment should turn
back on. Then try all of the functions on the
remote control (i.e. volume, mute, etc.) to ensure
you have the correct code. If any of the functions
do not operate as they should, enter the next 3digit code number from the brand list.
STEP5 Once you have found the correct 3-digit code, save it
by pressing the [AUX] button one more time. The
[AUX] LED light will blink twice to confirm the code
was stored.
I. Programming the System On/Off Button
This allows you to program the System On/Off button so it
can send up to five power On/Off commands with one button press.
STEP1 Press the [CBL] button.
STEP2 Press the [SYSTEM ON/OFF] button and the
[OK/SEL] button simultaneously for 3 seconds.
The [CBL] button will turn on for 30 seconds.
STEP3 Press the first [DEVICE] button you want to store in
the [SYSTEM ON/OFF] button and then the [POWER]
button. Repeat this for other Components until you
have stored all the desired power commands into the
[SYSTEM ON/OFF] button.
STEP4 Press the [CH ] button to save the power commands you stored. The [CBL] button will blink
twice to confirm the commands have been
saved.
J. Programming Volume Control
Volume and Mute control are factory programmed to automatically transfer to the respective Device mode You
select, as follows:
CBL : CBL
T V : TV
AUD : AUD
DVD : TV
AUX : AUX
If you wish to store the TV volume control in CBL mode,
use the following steps.
STEP1 Press the [OK/SEL] button and [CBL] button
simultaneously for three seconds. The device
LED will turn on for 30 seconds. The next step
must be performed while the LED is on.
STEP2 Press the [VOL ] button. The device LED will
blink.
STEP3 Press [TV] button. The device LED will blink twice
to confirm the programming.
*Note : To return CBL device to CBL volume repeat steps
above replacing [TV] with [CBL] in
Step 3 .
K. Programming Channel Control
You can program the channel controls (Channel
Up, Channel Down, Last and Numbers) from one Device
to operate in another Device mode. Default channel control settings on the remote control are as follows:
CBL : CBL
T V : CBL
AUD : AUD
DVD : DVD
AUX : AUX
If you wish to store the TV channel controls in TV mode,
use the following steps.
STEP1 Press the [OK/SEL] button and [TV] button simultaneously for three seconds. The device LED will turn
on for 30 seconds. The next step must be performed
while the LED is on.
STEP2 Press the [VOL ] button. The device LED will
blink.
STEP3 Press [TV] button. The device LED will blink twice to
confirm the programming.
*Note : To return TV device to CBL channel repeat steps
above replacing [TV] with [CBL] in Step 3.
L. Programming a ‘Macro’ button.
If your remote model has custom-programmable Macro buttons available(See Section 4), they can be programmed to act
as a 'Macro' or Favorite Channel button in CABLE mode. This
allows you to program up to five 2-digit channels, four 3-digit
channels or three 4-digit channels that can be accessed with
one button press.
STEP1 Press the [CBL] button to select the CBL mode.
STEP2 Press the [MACRO] button and [OK/SEL] button
simultaneously for 3 seconds. The [CBL] button
will turn on for 30 seconds.
STEP3 Enter the the 2, 3 or 4-digit code for the
channel you want programmed first (for example,
007) using the Number Pad, then press the
[STOP] button. Then enter the code for the next
channel (for example, 050), then press the [STOP]
button. Repeat this process for the third channel.
The [CBL] button will blink once for each channel
entered.
STEP4 Press the [CH ] button to store the channels
that were selected. The [CBL] button will blink
twice to confirm the storage of commands.
To access the programmed channels, press the [MACRO]
button once. This will bring up the first channel. Press
once again and it will bring up the second channel. Press
again and it will bring up the third channel.
M. RF Setting Method.(RF Frequency: 418Mhz)
STEP1 After installing the MRF-250C, press the [CBL]
and [LIST] button simultaneously for 3 seconds. The [CBL] device LED will turn on indicating that it is ready to be programmed. The
LED will remain on for 30 seconds.
STEP2 Enter the 2-digit ID number assigned to your
MRF-250C ID #. (00~09, A : 10, B : 11, C : 12, D : 13,
E : 14, F : 15)
STEP3 Once you have completed RF ID setting, Store the
2-digit number by pressing the [CBL] button once
again. The [CBL] device LED will blink twice to
confirm that the RF ID number has been stored.
*Note : Install and select the ID # on the MRF-250C. (For
further details, refer to the MRF-250C manual.) You
can operate up to 15 different equipment locations,
each with an MRF-250C unique Receiver ID #.
N. Low Battery Warning
When the batteries are low and need to be replaced with
fresh batteries, the Device LED lights will blink 2 times in
6 Quick Set-up Code Tables
sequence whenever a [POWER] button is pressed to turn
on equipment.
O. Memory Lock System
TV
This remote control is designed to retain programmed
memory for 10 years even after batteries are removed
from the remote control.
Quick Number
TV
Set-up Code Number:
AUD
Set-up Code Number:
DVD
Set-up Code Number:
AUX
Set-up Code Number:
For additional information about your remote control, go to
www.universalremote.com
Q. Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply
with the limits for aClass B digital device, pursuant to
part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference
in aresidential installation. This equipment generates,
uses and can radiate radiofrequency energy and, if not
installed and used in accordance with the instruc-tions,
may cause harmful interference to radio communications.
Quick Number
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit
different fromthat to which the receiver is connected.
Manufacturer/Brand
ROTEL
DENON
YAMAHA
MARANTZ
SONY
INTEGRA
HARMAN KARDON
PIONEER
ONKYO
LEXICON
Changes or modifications not expressly approved by the
manufacturer couldvoid the user's authority to operate
the equipment.
*Note :The manufacturer is not responsible for any
Radio or TV interferencecaused by unauthorized modifications to this equipment. Such
modificationscould void the user's authority to
operate the equipment.
Manufacturer/Brand
CISCO/SA
PIONEER
PACE
SAMSUNG
MOTOROLA
CE-LABS
DIGEO
EVOLUTION FTA
GENERAL INSTRUMENT
HAMLIN
HITACHI
JERROLD
MAGNAVOX
MEMOREX
MOXI
NFUSION
PANASONIC
PHILIPS
PULSAR
RCA
REGAL
REGENCY
SKY
SONY
SPRUCER
TELNET
TOCOM
TOSHIBA
VIEWSTAR
ZENITH
Set-Up Code Number
001 003 041 042 045 046
001 103 034 051 063 076 105
001 005 002
001 030
002 111 148
164
153
158
005 103 104
049 050 055
103 055
005 004 103 005 003 008 009 010 069
010 012
052
111 252 153
192
044 047
006 012 013 020 085
052
047
049 050
057
230 204
108
047
354
039 040 056
052
012 015
052 060 093 100
TV
Quick Number
Warning!
FCC Caution
AUX
This device complies with Part 15 of the FCC Rules.
Operation is subject to thefollowing two conditions: (1)
this device may not cause harmful interference,and (2)
this device must accept any interference received,
including interferencethat may cause undesired operation.
Quick Number
The antenna(s) used for this transmitter must not be colocated or operating inconjunction with any other antenna or transmitter.
SANYO
SONY
SAMSUNG
LG
TOSHIBA
PANASONIC
PHILIPS
HITACHI
SHARP
VIZIO
DVD
Consult the dealer or an experienced radio/TV
technician for help.
Any changes or modifications not expressly approved by
the party responsiblefor compliance could void the
authority to operate equipment.
Manufacturer/Brand
AUDIO
However, there is no guarantee that interference will not
occur in a particularinstallation. If this equipment does
cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment
off andon, the user is encouraged to try to correct the
interference by one more of thefollowing measures:
Increase the separation between the equipment
and receiver.
CBL-CABLE Converters
P. Record Your Component Set-up Codes
7 Set-up Code Tables
Manufacturer/Brand
HITACHI
SONY
PHILIPS
SAMSUNG
PHILIPS MAGNAVOX
PANASONIC
LG
JVC
DENON
PIONEER
Manufacturer/Brand
BOSE
HP
APPLE / iPod
APPLE / iPod
MICROSOFT / XBOX
SONY / PS2
LUTRON
X-10
X-10
MICROSOFT / XBOX
Manufacturer/Brand
A MARK
ABEX
ACCURIAN
ADMIRAL
ADVENT
ADVENTURA
AIKO
AKAI
Set-Up Code Number
112 143
025
036
072 251 333
247 388
002
103
116 146 248 404 405 473 475 323 387
391 615
ALBATRON
017
ALERON
028
AMERICA ACTION 043
AMPRO
073
AMSTRAD
052
ANAM
043 054 056 080 112
AOC
116 363 112 058 616
APEX
572
APEX DIGITAL
006
AQUAVISION
573 574
ASTAR
477
AUDIOVOX
076 454 388
AVENTURA
052
AVION
441
AXION
039
BELCOR
116
BELL&HOWELL
333 072
BENQ
423 600
BOXLIGHT
266
BRADFORD
043
TV
Manufacturer/Brand
BROCKWOOD
BROKSONIC
BYDESIGN
CANDLE
CAPEHART
CARY AUDIO DESIGN
CELEBRITY
CENTURION
CETRONIC
CHANGHONG
CITIZEN
CLARION
CLASSIC
CLP CLASSIC
COLORTYME
CONCERTO
CONCIERGE
CONTEC
CORNEA
CORONADO
CRAIG
CROSLEY
CROWN
CURTIS MATHES
CXC
CYBERHOME
DAEWOO
Set-Up Code Number
116
238
031 032
116 002 003 363
058
266
001
116
043
247
116 002 003 363 043 258 103 143
043
043
333
116
363
073
043 050 051
116
143
043 054
164
043 143
116 258 363 143
043
015
363 016 043 044 076 103 114 125 127
143
DAYTRON
363 143
DELL
320 164 363 618
DIGITAL PROJECTION 570
DIMENSIA
333
DREAMVISION
235
DUKANE
011 025
DUMONT
116 073
DURABRAND
096 052
DWIN
257
DYNASTY
043
DYNEX
400
EIKI
187
ELECTROBAND
001
ELECTROGRAPH 466
ELECTROHOME
143 024 076 196
ELEKTRA
072
ELEMENT
363 494 526 622
EMERSON
028 048 043 155 005 116 363 047 050
051 076 096 143 153 154 052 514
ENVISION
116
EPSON
324 590
ESA
323
FISHER
007 057
FUJITSU
246 198 410
FUNAI
028 043 052
FUTURETECH
043
GATEWAY
242 268
GE
073 116 008 009 034 056 074 155 333
363
GEM
391
GIBRALTER
116 073
GO VIDEO
026
GOLDSTAR
113 116 102 363 106 112 127 143
GRUNPY
028 043
HAIER
363 501 623
HALL MARK
363
HANNSPREE
349 381
TV
Manufacturer/Brand
HARLEY DAVIDSON
HARVARD
HAVERMY
HELLO KITTY
HIMITSU
HISENSE
HITACHI
TV
Set-Up Code Number
028
043
081
076
043
419 442 619
011 166 009 010 012 023 075 143 158
072 363 250 587 613
HP
378 316 327 421
HUMAX
518
HYPERION
609
HYUNDAI
337 338
ILO
472 399
INFINITY
164
INFOCUS
333 230 547 548 470 532 564 595
INITIAL
035 282
INSIGNIA
350 400 052 164 403 454 457 604 617
INTEQ
073
JANEIL
002
JBL
164
JCB
001
JCPENNEY
024 116 008 009 030 065 258 143 333
363
JENSEN
013
JVC
038 034 001 083 199 210 533 581
KAWASHO
116 001
KEC
043
KENWOOD
116 001
KLEGG
466
KLOSS
002 059
KMC
143
KNOLL SYSTEMS 230
KONKA
457
KREISEN
530
KTV
043 116 143 154
KURAZAI
072
LG
363 113 116 102 106 112 127 143 569
284
LITEON
268
LODGENET
072
LOEWE
164
LOGIK
072
LUXMAN
363
LXI
166 007 138 052 251 333 164
MAGNAVOX
164 059 116 003 060 061 363 127 022
333 094 226 390 467 431
MAJESTIC
333 072
MARANTZ
116 164 281 562 584
MATSUI
164
MATSUSHITA
080
MAXENT
242
MEGATRON
116 011
MEMOREX
007 072 363
MGA
116 363 024 028 042
MIDLAND
333 073
MINTEK
362
MINUTZ
008
MISAKAI
052
MITSUBISHI
124 109 024 028 040 042 146 363 348
450
MONIVISION
017
MONTGOMERY WARD 333 072
MOTOROLA
081
MTC
116 363 258
MULTITECH
043
Manufacturer/Brand
NAD
NEC
TV
Set-Up Code Number
138 025
272 197134 116 040 016 024 056 019
262 236 281 575
NET TV
242
NEXUS
620
NIKEI
043
NIKKO
116
NIKO
527
NORCENT
390
NORWOOD MICRO 027
NTC
103
NUVISION
351 567
OLEVIA
432 363 333
ONKING
043
ONWA
043
OPTIMUS
025
OPTOMA
265 249
OPTONICA
019 251
ORION
096
PANASONIC
080 034 056 164 208 359 552 524 607
PHILCO
116 003 059 060 164 363 024 056
PHILIPS
164 005 093 038 116 003 363 059 127
206 431 333 161 594
PILOT
116
PIONEER
234 135 025 018 023 116 393 272 520
582
POLAROID
388 323 328 353 354 355 356 494 387
391 505 506 508
PORTLAND
363 143
PRINCETON
004
PRISM
034
PROSCAN
333
PROTON
363 112 058 143 171 172 033 528
PROTRON
392 398 498 499 500
PROVIEW
494
PROX
572
PULSAR
116 073
QUASAR
034 056 606
RADIO SHACK
019 363 143 043 127
RCA
333 065 116 363 024 056 152 023 074
161 588
REALISTIC
007 019 043 047
REVOLUTION HD 466
RUNCO
182 073 395 416 072 342
SAMPO
116 058 363 242
SAMSUNG
258 050 089 105 363 127 143 333 228
229
SAMSUX
116
SANSEI
076
SANSUI
096 400 615
SANYO
166 007 020 053 057 082 187 511 266
SCEPTRE
276
SCOTCH
116
SCOTT
028 043 048 143 363 497
SEARS
030 363 007 028 057 143 094 333 082
166 138
SELECO
205 011
SHARP
251 019 014 028 029 363 022 143 175
308
SHENG CHIA
081
SHERWOOD
349
SHOGUN
116
SIGNATURE
072
SIMPSON
003
SONY
001 608
SOUNDESIGN
028 363 003 043
Manufacturer/Brand
Set-Up Code Number
SOVA
SOYO
SPECTRICON
SPECTRONIQ
SQUAREVIEW
SSS
STARLITE
SUNBRITE TV
SUPERSCAN
SUPRA
SUPRE MACY
SUPREME
SVA
SYLVANIA
041
528 033
112
499 500
052
363 043
043
605
052 081
116
002
001
328
116 003 052 059 060 164 044 333 127
514 593
SYMPHONIC
052
SYNTAX OLEVIA 432 363 333
TANDY
251
TATUNG
056
TECHNICS
034 080
TECHNOL ACE
028
TECHVIEW
045 557
TECHWOOD
363
TEKNIKA
002 003 363 024 028 043 072 258 143
TELEFUNKEN
037 046 615
TELERENT
072
TERA
172
THOMSON
049 055
TMK
363
TNCI
073
TOSHIBA
138 030 007 040 258 325 230
TOTEVISION
143
TRUTECH
529
TVS
096
UNIVERSAL
008 009
VICTOR
038
VIDEO CONCEPTS 146
VIDIKRON
174 164 188 192 342
VIDTECH
363
VIEWSONIC
242 389
VIKING
002
VIORE
472 592
VISCO
526
VITO
363
VIZIO
386 387 624 625
WARDS
363 008 009 019 028 060 061 072 074
143 164 034
WAYCON
015
WESTINGHOUSE 076 276 435 001 280
WINBOOK
339
YAMAHA
116 363 370
YORK
363
YUPITERU
043
ZENITH
363 073 072 095 103
ZONDA
112
TV-LCD & Plasma TVs
Manufacturer/Brand
ACCURIAN
ADVENT
AKAI
AOC
APEX
APEX DIGITAL
Set-Up Code Number
036
247 388
404 405 473 475 323 387 391 615
116 363 616
572
006
TV-LCD & Plasma TVs
TV-LCD & Plasma TVs
TV-Projectors
Manufacturer/Brand
Manufacturer/Brand
Manufacturer/Brand
AQUAVISION
ASTAR
AUDIOVOX
AVION
AXION
BENQ
CHANGHONG
CYBERHOME
DAEWOO
DELL
DURABRAND
DWIN
DYNEX
ELECTROGRAPH
ELEMENT
EMERSON
ESA
FUJITSU
FUNAI
GATEWAY
GO VIDEO
HAIER
HANNSPREE
HISENSE
HITACHI
HP
HUMAX
HYPERION
HYUNDAI
ILO
INFOCUS
INITIAL
INSIGNIA
JVC
KLEGG
KONKA
KREISEN
LG
LITEON
LOEWE
MAGNAVOX
MARANTZ
MAXENT
MINTEK
MITSUBISHI
NEC
NEXUS
NIKO
NORCENT
NORWOOD MICRO
NUVISION
OLEVIA
PANASONIC
PHILIPS
PIONEER
POLAROID
Set-Up Code Number
573 574
477
454 388 076
441
039
600
247
015
076 363
320 164 363
052
257
400
466
363 494 526 622
514 363 076 052
323
246 198
052
242 268
026
363 501 623
349 381
419 442 619
011 363 613
378 316 327 421
518
609
337 338
472
547 470
035 282
350 400 052 164 403 454 457 604 617
038 210 581
466
457
530
363 569 113 116 284
268
164
164 363 226 390 467 431
116 164 281
242
362
124 363
272 262 575
620
527
390
027
351 567
432 363 333
080 164 208 552 524
164 363 431 161 594
234 135 393 272 520 582
388 323 328 353 356 494 387 391 505
506
PRINCETON
004
PROTON
033 528
PROTRON
392 398 498 499 500
PROVIEW
494
PROX
572
RCA
333 363 161 588
REVOLUTION HD 466
RUNCO
395 416
SAMPO
SAMSUNG
SANSUI
SANYO
SCEPTRE
SHARP
SHERWOOD
SONY
SOVA
SOYO
SPECTRONIQ
SUNBRITE TV
SVA
SYLVANIA
SYMPHONIC
SYNTAX OLEVIA
TATUNG
TECHVIEW
TELEFUNKEN
TOSHIBA
TRUTECH
VIEWSONIC
VIORE
VISCO
VITO
VIZIO
WESTINGHOUSE
WINBOOK
YAMAHA
ZENITH
Set-Up Code Number
363 242
258 228 229
096 400 615
166 007
276
251 363
349
001
041
528 033
499 500
605
328
052 164 333 514
052
432 363 333
056
045 557
615
138 258 325
529
242 389
472 592
526
363
386 387 624 625
076 276 435 001
339
116 363
363 073 072
TV-Projection TVs
Manufacturer/Brand
AKAI
DAEWOO
EPSON
HITACHI
HP
INFOCUS
JVC
LG
LOEWE
MAGNAVOX
MITSUBISHI
OPTOMA
PANASONIC
PHILIPS
RCA
SAMSUNG
SANYO
SHARP
SONY
TOSHIBA
ZENITH
Set-Up Code Number
404 405 473 475
076
324
011
378
333 548
038
363
164
164 333
109
265
080 524
164 431
333
258
166 007 187
251
001
138
363 073 072
TV-Projectors
Manufacturer/Brand
BENQ
BOXLIGHT
DELL
DIGITAL PROJECTION
DREAMVISION
EPSON
Set-Up Code Number
423
266
618
570
235
590
FUJITSU
HITACHI
INFOCUS
JVC
KNOLL SYSTEMS
MARANTZ
MITSUBISHI
NEC
OPTOMA
PANASONIC
RUNCO
SANYO
SELECO
SHARP
SIM2
TOSHIBA
VIDIKRON
YAMAHA
AUDIO
Set-Up Code Number
410
250
230 532 564 595
199 533
230
281 562 584
348
236 281
249
359 607
342 182
511 266
205
308
205
230
342 174 188 192
370
AUDIO
Manufacturer/Brand
ADCOM
AIWA
AKAI
ANTHEM
ARAGON
ARCAM
ATLANTIC TECHNOLOGY
AUDIO FILE
B&K
BOSE
BOSTON ACOUSTICS
CAMBRIGE AUDIO
CARVER
CARY AUDIO DESIGN
CITATION
CLARION
DENON
DIGITAL PROJECTION
DVICO
ELAN
ENLIGHTENED AUDIO
ESCIENT
FISHER
FLEXTRONICS
FOSGATE AUDIONICS
GOLDSTAR
HARMAN KARDON
HITACHI
INTEGRA
JAMO
JCPENNEY
JVC
KENWOOD
KLEGG
KLH
KLIPSCH
KOSS
KRELL
LEXICON
LINN
LUXMAN
MAGNAVOX
Set-Up Code Number
082 092 225 161 269 356
018 104 202 203 213 211 188
189
335 337
687
141 077
342
071
096 097
070 224
447
684
006 028 061 071 201 214 226 185 013
077 284
378
148
026
109 215 230 234 330 340 679 569 774
660
570
057 290
099 098
451
214 182
378
148 342
008
148 233 077 028 118 318
020
275 017 046 108 080 209 381
399
216
163 191 114 279 291
026 066 145 192 182 005 280 374
686
331
687
216
072 384 672
120 235 236 237 357 360
124 377
009 139 052 165 115 004
086 164 152 077
Manufacturer/Brand
MARANTZ
MCINTOSH
MERIDIAN
MITSUBISHI
MONDIAL
MYRYAD
NAD
NAKAMICHI
NEC
NILES
ONKYO
OPTIMUS
OUTLAW
PANASONIC
PARASOUND
PHILIPS
PIONEER
PROCEED
RCA
REALISTIC
ROTEL
SAMSUNG
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SONY
SOUNDESIGN
SUNFIRE
TEAC
TECHNICS
THETA DIGITAL
TOSHIBA
YAMAHA
ZENITH
DVD
Set-Up Code Number
006 028 031 040 063 185 186 265 289
492 712 719
238 286 311
100 012 013 628
242 204
157 158 042 043 081 112
077
186 113
040 244 245 172 183 287
176
403
275 017 046 108 080 209 381
026 041
342
032 195 219 177 292 626
129 130 132 261 294 295 333 334
249 250 063
014 039 044 069 168 116 035 063 198
480
144 268
010 048 117 156 067 288
019 073 075 095
074 083 085
016
040 048 110 063 065 228
214
019
026 094 175
024 102 106 447 370
001 018 247 248 166 101 184 218 271
560 612
036
344 345 182
005 019 049 040 212 217
122 176 193 219 178 177 200 257 262
136
060 087 198 278
026 253 169 067 173 205 264 232 089
264 274 715 717 644 695 738 756
143 210
DVD
Manufacturer/Brand
ACCURIAN
ADCOM
ADVENT
AIWA
AKAI
ALLEGRO
ALPINE
AMW
APEX DIGITAL
ARCAM
ASPIRE DIGITAL
AUDIOVOX
BEL CANTO DESIGN
BLAUPUNKT
BROKSONIC
BUFFALO
CALIFORNIA AUDIO LABS
CAMBRIDGE AUDIO
CARY AUDIO DESIGN
CENTRIOS
CINEVISION
Set-Up Code Number
003 268
157
005
146
281
091
098
006 007
087 111 115
122
008 009
003 010 014 015 149
016
111
130
264
021 124
323 333
174 266
019
091
Manufacturer/Brand
CITIZEN
COBY
CYBERHOME
DAEWOO
DENON
DIAMOND VISION
DISNEY
DURABRAND
DVD 2000
EMERSON
ENTERPRISE
ESA
FISHER
FUNAI
GATEWAY
GE
GO VIDEO
GOLDSTAR
GPX
GRADIENTE
GREENHILL
GRUNDIG
HARMAN KARDON
HITACHI
HITEKER
ILO
INITIAL
INSIGNIA
INTEGRA
JATON
JBL
JSI
JVC
JWIN
KAWASAKI
KENWOOD
KISS
KLH
KONKA
KOSS
KREISEN
KRELL
LASONIC
LEXICON
LG
LITEON
LOEWE
MAGNAVOX
MALATA
MARANTZ
MCINTOSH
MEMOREX
MERIDIAN
MICROSOFT
MINTEK
MITSUBISHI
MYRYAD
NAD
NAKAMICHI
NESA
NEUNEO
NEXXTECH
NORCENT
ONKYO
OPPO
DVD
Set-Up Code Number
020
260
271
132
080 173 138 329
037 038 039
040 096
091
017
091 143
074
022 143
147
143
222
027
137 091 220 221 222
091
044 045
021
111
083
084 140
101
087
268
111
143 292 297 091 096 349
142 180 280 273 338
046
084
047
012
048 050
149
151
279
135
051 052 054 055
047 058 059
060
104
061 062
148
091 057 074 350
264 265 268
063
066 096 282
267
066 332
125
040 096 163
153
027 206
111 282
017
102 134
088 353
103
111
067
068
005 006 007 069 071 072 073
076 141 180 273 338
266 341
Manufacturer/Brand
Set-Up Code Number
OPTIMUS
ORION
ORITRON
PANASONIC
PARASOUND
PHILIPS
PHILIPS MAGNAVOX
PIONEER
POLAROID
POLK AUDIO
PRESIDIAN
PRIMA
PRIMARE
PRINCETON
PROSCAN
RCA
RIO
RJTECH
ROTEL
SAMPO
SAMSUNG
SANSUI
SANYO
SEARS
SENSORY SCIENCE
SHARP
SHERWOOD
SHINSONIC
SONIC BLUE
SONY
023
130
058
144 150 285 138 021 346 347
245
066 276 317 344
141 066
023 099 131 304 337 354
233 284 295 297
141 066
003 096
005
193 194
078
027
027 307
091
269
204
081 082 085
070 165 137 159 275
154
147
130
222
094
245 345
033
091
001 033 145 191 286 241 242 243 340
343 351
SPECTRONIQ
310
SUNGALE
090 223
SUPERSCAN
143
SVA
092 093
SYLVANIA
143
SYMPHONIC
143
TAG MCLAREN
156
TATUNG
102
TEAC
023 270
TECHNICS
138
TECHWOOD
088
THETA DIGITAL 023
THOMPSON
027
TOSHIBA
130 141 164 188 273
TRUTECH
293
URBAN CONCEPTS 035
US LOGIC
111 282
VENTURER
149
VINC
161 308
X-BOX
027 206
YAMAHA
089 066 197 138 334
ZENITH
057 074 091
DVD-Blu-ray & HD DVD
Manufacturer/Brand
DENON
INSIGNIA
INTEGRA
LG
MAGNAVOX
MARANTZ
NAD
ONKYO
Set-Up Code Number
329
096 349
273 338
091 350
096
332
353
273 338
DVD-Blu-ray & HD DVD
DVD-DVD/VCR Combos
Manufacturer/Brand
Manufacturer/Brand
OPPO
PANASONIC
PHILIPS
PIONEER
SAMSUNG
SHERWOOD
SONY
TOSHIBA
YAMAHA
Set-Up Code Number
341
285 346
344
304 354
275
345
286 340 351
273
334
DVD-DVD Recorders
Manufacturer/Brand
GO VIDEO
CYBERHOME
ILO
KISS
LITEON
MAGNAVOX
PANASONIC
PHILIPS
RCA
SAMSUNG
SENSORY SCIENCE
SONY
TOSHIBA
Set-Up Code Number
220 221 222
271
268
279
265 268
096
138
317
027
301
222
191
188 273
DVD-TV/DVD Combos
Manufacturer/Brand
AIWA
AKAI
AUDIOVOX
DURABRAND
ESA
FUNAI
INSIGNIA
MAGNAVOX
MINTEK
POLAROID
SAMSUNG
SV2000
SYLVANIA
SYMPHONIC
TOSHIBA
TRUTECH
Set-Up Code Number
146
281
284
143
143
143
292 297 143
282
282
284 295 297
165
143
143
143
130
293
DVD-TV/DVD/VCR Combos
Manufacturer/Brand
DURABRAND
EMERSON
ESA
INSIGNIA
MAGNAVOX
PANASONIC
SUPERSCAN
SV2000
SYLVANIA
SYMPHONIC
TOSHIBA
Set-Up Code Number
143
143
143
143
143
144
143
143
143
143
164
GO VIDEO
PANASONIC
PHILIPS
RCA
SAMSUNG
SANSUI
SONY
TOSHIBA
ZENITH
Set-Up Code Number
137
150
066
027
137 159
154
145
141
091
AUX-DVR(TIVO)
Manufacturer/Brand
DIRECTV
DSTV
HUGHES
HUMAX
ICREALTIME
MOXI
PHILIPS
RCA
REPLAY NETWORKS
SONY
TIVO
TOSHIBA
Manufacturer/Brand
819
787 788 789 800 786
817
817
784
782
790 817 785
809
775
804 805
790 817
817
Set-Up Code Number
699
347 409 460
564
589
398
530
573
598
343
552
516
690 705
513
685
654
571 653
652
317 319 321 322 324
510
772
AUX-Tuners & Satellite Radios
Manufacturer/Brand
ANTEX ELECTRONICS
BOSE
DELPHI
NEXUS AUDIO
PIONEER
RUSSOUND
SIRIUS
SONY
XM SATELLITE RADIO
ZEEVEE
Manufacturer/Brand
APPLE / iPod
BOSE
DENON
DLO
GRIFFIN
KENSINGTON
MARANTZ
ONKYO
SONANCE
Set-Up Code Number
824 828
827
830 559
418
835
825
834
833
831
AUX-Media PCs
Set-Up Code Number
AUX-Home Theater Systems
AIWA
BOSE
DENON
INSIGNIA
JAMO
KEF
KOSS
NAD
NIRO
ONKYO
PANASONIC
PHILIPS
PIONEER
POLKAUDIO
ROTEL
SAMSUNG
SHARP
SONY
TOSHIBA
VERIS
AUX-iPod Control
Set-Up Code Number
588
532 170
515
751
556
445
555 585 767
380
515 556
611
Manufacturer/Brand
ACER
APPLE TV
DELL
DENON
DLINK
GATEWAY
HAUPPAUGE
HP
KEYSPAN
LINKSYS
NETGEAR
ROKU
SILVERSTONE
SONY
SYABAS
TOSHIBA
WINBOOK
Set-Up Code Number
820
836
820
830
832 838
820
821 822
820
823
566
837
565
666
820
677
820
820
AUX-Gaming Systems
Manufacturer/Brand
AUDIO AUTHORITY
LOGITECH
MICROSOFT / XBOX
MICROSOFT / XBOX 360
SONY / PS2 / PS3
Set-Up Code Number
622
658
851
826
829 498
AUX-Lighting Controls
Manufacturer/Brand
COLORADIO VNET
LEVITON
LIGHTOLIER CONTROLS
LITE TOUCH
LUTRON
RAKO
X-10
Set-Up Code Number
849
850
848
843 844
839 841 341
846 847
840 842 845
AUX-Digital to Analog Converter box
Manufacturer/Brand
CISCO
DIGITAL STREAM
HOMECAST
SCHMARTZ
SKARDIN
SONY
ZENTECH
ZENITH
Set-Up Code Number
577
609
576
648
610
646 647
610
567

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Language                        : ko-KR
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : 최선미
Title                           : EMISSION TEST REPORT
Create Date                     : 2011:04:11 19:47:15Z
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2011:04:11 19:48:33+09:00
Metadata Date                   : 2011:04:11 19:48:33+09:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:cb328f8c-9ea8-45d3-810c-bf5394a3f429
Instance ID                     : uuid:980698dc-f2c3-4807-91c9-9b554cc38605
Page Count                      : 3
Author                          : 최선미

EXIF Metadata provided by EXIF.tools