Ohsung Electronics URCCP2 CENTRAL PROCESSOR User Manual G User s manual

Ohsung Electronics Co., Ltd. CENTRAL PROCESSOR G User s manual

User Manual

Order Number : GETEC-C1-14-179 FCC Part 15 subpart B Test Report Number : GETEC-E3-14-039 Page 1 / 1 EUT Type: CENTRAL PROCESSOR FCC ID.: OZ5URCCP2 APPENDIX G : USER’S MANUAL
Owner’s ManualCP-2 Central Processor
ccGEN2 CP-2 Owner’s Manual ©2013 Universal Remote Control, Inc.The information in this owner’s manual is copyright protected. No part of thismanual may be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc.UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this owner’s manual may be subject to change without priornotice.ccGEN2 is a registered trademark of Universal Remote Control, Inc.URC - Control the Experience is a registered trademark of Universal RemoteControl, Inc.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.Universal Remote Control,Inc.500 Mamaroneck Avenue, Harrison, NY 8528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSIntroduction 1Features and Benefits 1Parts Guide 1Front Panel Descriptions 2Rear Panel Descriptions 3Installing the CP-2 4Specifications 8Limited Warranty Statement 9End User Agreement 11Federal Communication CommissionInterference Statement 12Declaration of Conformity 13
Page 1CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERIntroductionCongratulations on purchasing the ccGEN2 CP-2 Central Processorfor automation and control. Using the ccGEN2 line of interfacesprovides you full access and control for every compatible deviceusing IR, IP, RS-232, and Relays. This network based control is alsocompatible with URC sensors, like audio sensor and video sensor,which detects the status of a device and provides automation triggers. The CP-2 makes it easy to turn on multiple devices at once such asa TV and Blu-Ray, even lights with one button press. Enjoy controlling your space!Features and BenefitslStores and issues commands and macros for all IP, IR, RS-232, Relay to compatible devices and other ccGEN2series base stations in the system.lProvides two-way communication with ccGEN2 interfaces.(RM-1 remote requires optional AZ-1 to be compatible with CP-2)lControl URC Lighting with an optional RFTX-1 RF Transmitter.lCan be programmed offsite via the internet.Parts GuideThe CP-2 Advanced Network System Controller includes:1 - Central Processor1 - Sleeved Emitter for RFTX-1 port1 - Wall Mount and 4 Screws1 - AC Power Adapter5 - Standard Emitters/Flashers1 - Adjustment Tool1 - Installation Manual
Page 2CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERFront Panel DescriptionsThe front panel consists of two indicator lights which illuminatewhen in use.Power LED: Indicates that the CP-2 is powered on when lit. Ethernet LED: Indicates the network connectivity status:● On = Connected●Off = Not connected●Blinking = Attempting to connect.Power LED Ethernet LED
Page 3CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERRear Panel DescriptionsThe rear panel ports are:DC 12V Power: Attach the included 12V power supply here. LAN Connection: RJ45 standard Ethernet connection to thelocal network. Relays (NO, NC, COM): Programmable relay to be normallyopened (NO), normally closed (NC) or momentary contact. Anapplication shall require less than 30V/.5A. RS-232: Two RS-232 ports support Tx(Transmit), Rx(Receive) and GND(Ground) connections for two-way communication.Compatible with URC cables RS232F and RS232M.Sensors: Two sensor ports allow programming of state dependentand triggered automation macros. Compatible with URC Video(SEN-VID), Voltage (SEN-VOLT), Audio (SEN-AUD), Current (SEN-CMF), Light (SEN-LITE), and Contact Closure (SEN-CCLS) sensors. IR Outputs: Six standard 3.5mm IR emitter ports with individualoutput level adjustment screws. Always use the supplied sleevedemitter with pink connector, in port #6. Plugging a regular emitterto this port may cause it to damage the unit and prevent it fromoperating correctly. RFTX-1 Port: Connect the included 3.5mm stereo to 3.5mm stereoto the optional RFTX-1 transmitter and control URC Lighting products via 418MHz or 433.92MHz wireless RF.Reset: Press and release to reboot. Pressing and holding for 15 seconds factory defaults the unit. DC 12VPowerRelay: NO,NC, COMRFTX-1ResetRS-232 PortsSensorsIR Outputs: #1-6LAN
Installing the CP-2Physical Installation of the CP-2 and AccessoriesThe CP-2 Central Processor can be installed anywhere in the homeor office network. Once installed, program it to operate all localequipment using IP/Network, IR, RS-232, or Relays. As well as querythe status of a device using Sensors. All cables are plugged into theirrespective ports in the rear of the unit. Network Installation1. Connect an Ethernet cable (RJ45) to the rear of the CP-2 and ontothe network.2. Plug flashers into any of the six IR outputs on the rear of the CP-2.(Make sure the 3.5mm pink connector cable is reserved for port#6.)Page 4CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLER
Page 5Optimizing IR Flasher LevelsTest a few commands for each device before fixing the flasher inplace on the front panel of a device. Since Satellite Receivers andCable Boxes are extremely sensitive to IR overload or saturation, youshould test them thoroughly. Put up the cable or satellite on-screen guide and test the navigation arrows. Compare operationvia RF to the original remote control. Operation should be identical.If operation is inconsistent or sluggish, lower the IR line outputand/or reposition the flasher.If you still have sluggish operation, check that the remote control isset to a particular LINE OUT, rather than ALL. When IR commandsare sent to all the flashers in a cabinet, you can have difficultyadjusting the IR Output. Reprogram the remote control to send IRcommands only via a specific (1-6) Line Output, then readjust the IRLine Output level.1. Connect an IR emitter to each IR output and run the emitter wireto the front panel of each component. DO NOT STICK the emitterin place. Adjust the level first.2. Adjust each of the IR Output levels with the included adjustmenttool for best operation. If the component operates best at minimumlevel, but is still operating sluggishly or intermittently, move theemitter farther away from the component’s IR sensor.RS-232 ConnectionThe CP-2 can operate equipment via RS-232 communication. Thisallows discrete serial commands to be triggered from a ccGEN2remote to a CP-2. The signal is then sent to the device overproprietary URC RS-232 cables. These use either male or female DB-9 connections with standard pin-outs. CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLER
Page 6Using Sensors with the CP-2The CP-2 uses sensors to detect audio, light, video, voltage, currentand contact closures to determine the equipment status, query the stateof a device or other automation triggers for the equipment it controls.For example, using a video sensor cable with the CP-2 can detect avideo signal from a composite or component video output. CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLER
Page 7Wiring to the Relay on the CP-2The CP-2 has a Relay with three contacts, NO, NC, and COM. Thesecan be used as dry contacts or to an electrical switch or motor for usewith screens, blinds, curtains, etc. The Relay can be programmed aseither a latching or a momentary contact. Using an RFTX-1 for URC One-Way Lighting productsThe CP-2 can use an RFTX-1, via the available RFTX-1 port. Itcontrols URC One-Way Lighting products at 418 or 433.92 MHz. Use the included 3.5mm to 3.5mm to connect to the RFTX-1 andplug the other end into the RFTX-1 port (#6).CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERRFTX-1
Page 8CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERSpecificationsNetwork: One 10/100 Ethernet portRelay: One relay configurable to be NO, NC or MomentarySensor: Two Sensors support Video (SEN-VID), Voltage (SEN-VOLT),Audio (SEN-AUD), Current (SEN-CMF), Light (SEN-LITE), andContact Closure (SEN-CCLS) sensors. RS-232: Two RS-232 ports support TX, RX and GND two-waycommunication via URC cables.IR: Six adjustable IR ports enable the included URC emitters tocontrol IR devices Note: 6th IR Output requires the includedsleeved emitter (identified by a pink connector), since it canoptionally be used to connect an RFTX-1.Weight: 10.5 oz. Size: 9.76” X 4.72” X 1.10”Power: 12V External Power Supply
Page 9CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERLimited Warranty Statement1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipmentshall be free from defects in material and workmanship under normal usagefor one (1) year from purchase when such is purchased from URC. Thislimited warranty is valid only in the United States of America. URC warrantsthat the software will substantially conform in any material respect to itsfunctional specifications at the time of delivery. URC SHALL NOT BE LIABLEFOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OROMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOTWARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREEOR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE. URC warrants that at the time of purchase the URC equipment and the URCsoftware complied with all applicable regulations and policies of the FederalCommunications Commissions (“FCC”) regarding electromagneticinterference caused by electronic/computing devices and to the extent that theURC equipment and/or the URC software fails to so comply, URC shall, at itsown expense, take all reasonable measures to promptly cause such tocomply.URC equipment purchases from other than an authorized URC dealer ordistributor are without warranty. THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCEFOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLYPROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE ANDDOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANYWARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URCEXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URCDOES NOT WARRANT, GUARANTEE, OR MAKE ANYREPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THEUSE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION INTERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICESARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENTPERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALLWARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUTNOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE
Page 10CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERSKILL AND CARE, OR OUTCOME OR RESULTS.WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHERPROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGEFROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS,(III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THEWARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTYCLAIM PROCEDURE. The warranty limitations and warranty disclaimers may not apply to end userin whole or in part, where such are restricted or excluded by applicable lawand such shall apply to the maximum extent permitted by applicable law.In the event of any warranty claim, URC will, at its sole option, repair the URCequipment using new or comparable rebuilt parts, or exchange the URCequipment for new or rebuilt equipment. In the event of a defect, these arethe end user’s exclusive remedies.All the URC equipment returned for service, exchange or repair require anRGA number. To obtain an RGA number, you must complete a ReturnRequest Form which you may obtain by calling (914) 835-4484 or contactingURC at returnrequest@universalremote.com. To obtain warranty service, enduser must deliver the URC equipment, freight prepaid, in its original packagingor packaging affording adequate protection to URC at 420 Columbus Avenue,Valhalla, NY 10595. It is end user’s responsibility to backup any macroprogramming, artwork, software or other materials that may have beenprogrammed into the unit. It is likely that such data, software, or othermaterials will be lost during service and URC will not be responsible for anysuch damage or loss. A dated purchase receipt, bill of sale, installation contractor other verifiable proof of purchase is required. For the URC equipmentsupport and other important information, please visit URC's website availableat www.universalremote.com or call the Customer Service Center at (914) 835-4484.This limited warranty only covers the URC equipment issues caused bydefects in material or workmanship during ordinary consumer use. It does notcover product issues caused by any other reason, including but not limited toproduct issues due to commercial use, acts of God, third-party installation,misuse, limitations of technology, or modification of or to any part of the URCequipment. This limited warranty does not cover the URC equipment sold asused, as is, refurbished, so called "B stock" or consumables (such as batteries).This limited warranty is invalid if the factory applied serial number has beenaltered or removed from the URC equipment. This limited warrantyspecifically excludes the URC equipment sold by unauthorized resellers. With the exception of URC’s IR-only, broad-based consumer remotes, none of
Page 11CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERURC’s PC programmable remotes or any of our Total Control® whole-houseequipment are authorized for online internet sales. Buying URC’s PCprogrammable remotes or any of our Total Control® whole-house equipmentonline means buying equipment that does not have a URC’s limited warranty.Such equipment is not eligible for URC tech support or software support,either.2. URC’S Limitations of Liability IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGESOF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TODATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALLBE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTSPAID BY END USER FOR THE URC EQUIPMENT.IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITSCONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OFEND USER OR ANY THIRD PARTY. THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER INWHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OREXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THEMAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADEBY OTHERS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, ORALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTYLASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLYTO END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFICLEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICHVARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.End User AgreementThe terms and conditions of the End User Agreement is available atwww.universalremote.com/eua.php shall apply.
Page 12CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLERFederal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a res-idential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one more of thefollowing measures:uReorient or relocate the receiving antenna.uIncrease the separation between the equipment and receiver.uConnect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.uConsult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.The antenna(s) used for this transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
Page 13Declaration of ConformityCompany Name : OH SUNG ELECTRONICS CO., LTD.Company Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK, REPUBLIC OF KOREA Contact Information : Phone: +82-54-468-7281, Fax: +82-54-461-8368Brand Name : UNIVERSAL remote controlProduct Name : CENTRAL PROCESSORModel Name : CP-2This product herewith complies with the requirements of EMC Directive(2004/108/EC)issued by the Commission of the European CommunityCompliance with these directives implies conformity to the following European Communityn EMC Directivel EN 55022l EN 55024l EN 61000-3-2l EN 61000-3-3List of test reports and/or certificate verified compliance with the standards aboveDate of issue :Name and signature of authorized person :n EMC Directivel Report No.l Testing Laboratory : Gumi College EMC CenterQuality Assurance TeamOH SUNG ELECTRONICS CO., LTD.CCGEN2 CP-2 ADVANCED NETWORK SYSTEM CONTROLLER
Page 14NOTE
Page 15NOTE
OCE-0073k Rev 01500 Mamaroneck Avenue, Harrison, NY 8528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com

Navigation menu