Ohsung Electronics URCDMS1200N Multi Zone Amplifier User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. Multi Zone Amplifier EMISSION TEST REPORT

User Manual

  Order Number : GETEC-C1-17-268 FCC Part 15 Certification  Test Report Number : GETEC-E3-17-034  Page 1 / 1   EUT Type: Multi Zone Amplifier FCC ID.: OZ5URCDMS1200N   APPENDIX G : USER’S MANUAL
DMS-1200 Owner’s ManualMulti-Zone Amplifier
DMS-1200 Owner’s Manual ©2010 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manualmay be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc.UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPER-ATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this manual may be subject to change without priornotice.URC - Control the Experience is a registered trademark of Universal RemoteControl, Inc.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.Universal Remote Control,Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
Introduction 1System Features 2Front Panel Features 3Rear Panel Features 4Important Safety Instructions 6Federal Communication CommissionInterference Statement 8USA Limited Warranty Statement 9Specifications 11System Configuration for Internal LAN Network 12Europe Certificate Of Conformity 13THE DIGITAL MULTI-ZONE AMPLIFIER
Page 1THE DIGITAL MULTI-ZONE AMPLIFIERCongratulations!You’ve purchased the finest music distribution system avail-able today. The DMS-1200 is a native to the network, CDquality digital music distribution system with a range of key-pads and remote controls that not only fully control yourmusic but control of all your other audio video components. The DMS-1200 in many ways is the heart of your system,both distributing music to your speakers and distributingstreams of music from your analog sources to other DMSamplifiers in the system. This makes your system scalable, andeasy to add additional rooms at any time in the future. All youneed is a DMS amplifier connected to the network to makeany room a new DMS music room.Along with the DMS-1200, your system will include a MasterSystem Controller like the MRX-10 (the brain of the system)and as many digital music gateways as you have users via theunique URC SNP-1 Streaming network Player.Each player provides one user with access to all of their musicand all of their preferences and favorites. Each SNP-1 access-es what’s stored on the network and what is available throughthe internet via Pandora, Rhapsody, XM, Sirius and InternetRadio. SNP-1s don’t have to be installed in the room wherethe DMS resides. That way you can take advantage of the TVdisplay of cover art, album name, artist names and song titlein rooms with TVs by having your installer connect to one ofyour TVs in the system.The DMS-1200 is designed for professional installation only.He or she will help you select the right user interface forevery room of your installation. You’ll have a choice of TotalControl in-wall keypads and remote controls. If you havequestions, call our customer service center at:Company:Installer Name:Contact #:Email Address:
Page 2DMS-1200 FEATURES AND BENEFITSSystem FeaturesPristine Audio QualityUnlike other digital music systems, the DMS systemstreams all music uncompressed at pure CD qualitylevels. You enjoy all the detail of your original source.Room LinkingAny room can be linked with any other room to listento the same source. This makes it easy for you toentertain by simply linking all the rooms your guestswill be in and controlling the music from any remoteor keypad. ReliabilityThe DMS-1200 is engineered first and foremost forreliability. It offers extensive internal protection againstfailure and is manufactured in our ISO 9000 certifiedfactory with the utmost attention to quality control atevery stage of manufacturing, from parts procurementto final assembly.
Page 3DMS-1200 FEATURES AND BENEFITSFront Panel FeaturesPower and LAN LEDsLEDs indicate that the DMS-1200 is connected topower and connected to the local area network. Automatic Power OffThe DMS-1200 is powered off and in an automaticstandby state when no zones are active. Reset ButtonThe front panel reset button offers the end user aquick way to reconnect the DMS-1200 to the localarea network.
Page 4DMS-1200 FEATURES AND BENEFITSRear Panel Features110V-220V Power ConnectionThe IEC power socket enables either UL/CSA approved110V power cords or CE approved 220V power cables tobe used with the DMS-1200. The internal power supplyautomatically switches from 110V to 240V.Automatic Fan for CoolingA whisper quiet fan automatically engages to keep theinternal temperature optimum for long life and reliableoperation.Network ConnectionA 10/100 LAN connection ensures that the DMS-1200will receive all network streams from other DMS or SNP sources.Six Powered ZonesThe DMS-1200s internal amplifiers will power sixpairs of 8 ohm speakers with 50 watts per speaker.Each pair of speakers can listen to any DMS source.
Page 5DMS-1200 FEATURES AND BENEFITSTwo Preamp ZonesThe two preamp zones enable external power ampli-fiers to be used for rooms with a need for more or lesspower than 50 watts per channel. External amplifiersequipped with 12V triggers are ideal, since they willautomatically switched on when the zone is in use,and switched off when the zone is off.4 Audio Inputs Create DMS StreamsUp to four analog audio sources can be connected tothe DMS-1200. Each is simultaneously available as aDMS stream on the network, not just to the DMS theyare connected to, but all other DMS amplifiers on thesame network.IR In for 1-Way RF Remotes and Base StationsWhen connected to a URC RF base station, a one-wayURC remote control can be programmed to controlany or all zones.
Page 6Important Safety InstructionsThis unit shall be connected to a mains socket outlet with a protectivegrounded connection.CAUTION: To completely disconnect this product from the mains, disconnect theplug from the wall socket outlet. The mains plug is used to completelyinterrupt the power supply to the unit and must be within easy accessby the user. CAUTION:These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other thanthat contained in the operating instructions unless you are qualified to do so.IMPORTANT SAFETY INSTRUCTIONS
Page 7IMPORTANT SAFETY INSTRUCTIONSImportant Safety Instructions1.    Read these instructions.2.    Keep these instructions.3.    Heed all warnings.4.    Follow all instructions.5.    In the event of malfunction, un plug lmmediately.6.    Do not use this apparatus near water.7.    Clean only with dry cloth.8.    Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions.9.    Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus(including amplifiers) that produce heat.10.  Do not defeat the safety purpose of the polarized or grounding-type plug.      A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.11.  Protect the power cord from being walked on or pinched particularly atplugs, convenience receptacles, and the point where they exit from theapparatus.12.  Only use attachments/accessories specified by the manufacturer.13.  Use only with the cart, stand, tripod, bracket, or tablespecified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.14.  Unplug this apparatus during lightning storms or whenunused for long periods of time.15.  Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any way,such as power-supply cord or plug is damaged, liquid has been spilled orobjects have fallen into the apparatus, the apparatus has been exposed torain or moisture, does not operate normally,or has been dropped.CAUTION: The ventilation should not be impeded by covering the ventilationopenings with items, such as newspapers, tablecloths, curtains,etc.No naked flame sources, such as lighted candles, should beplaced on the unit.Minimum distances around the apparatus for sufficientventilation : 20centimeterThis product is use in moderate climates.Do not expose the unit to dripping or splashing fluids, do notplace objects filled with liquids, such as vases, on the unit.
Page 8Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a res-idential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.DMS-1200 FEATURES AND BENEFITS
Page 9USA WARRANTYUSA Limited Warranty StatementYour Universal Remote Control, when delivered to you in new con-dition, is warranted against defects in materials or workmanship asfollows: UNIVERSAL REMOTE CONTROL, INC. warrants this prod-uct against defects in material or workmanship for a period of one(1) year and as set forth below. Universal Remote Control will, at itssole option, repair the product using new or comparable rebuiltparts, or exchange the product for a comparable new or rebuiltproduct. In the event of a defect, these are your exclusive remeies.This Limited Warranty covers only the hardware components pack-aged with the Product. It does not cover technical assistance forhardware or software usage and it does not cover any softwareproducts whether or not contained in the Product; any such soft-ware is provided "AS IS" unless expressly provided for in anyenclosed software Limited Warranty. To obtain warranty service, you must deliver the product, freightprepaid, in its original packaging or packaging affording adequateprotection to Universal Remote Control at the address provided inthe Owner's Manual. It is your responsibility to backup any macroprogramming, artwork, software or other materials that may havebeen programmed into your unit. It is likely that such data, soft-ware, or other materials will be lost during service and UniversalRemote Control will not be responsible for any such damage orloss. A dated purchase receipt, Bill of Sale, Installation Contract orother verifiable Proof of Purchase  is required. For product supportand other important information visit Universal Remote Control'swebsite: http://www.UniversalRemote.com or call the CustomerService Center (914) 835-4484. This Limited Warranty only covers product issues caused by defectsin material or workmanship during ordinary consumer use. It doesnot cover product issues caused by any other reason, including butnot limited to product issues due to commercial use, acts of God,third-party installation, misuse, limitations of technology, or modifi-cation of or to any part of the Universal Remote Control product.This Limited Warranty does not cover Universal Remote Controlproducts sold as USED, AS IS, REFURBISHED, so-called “B STOCK”or consumables (such as batteries). This Limited Warranty is invalidif the factory-applied serial number has been altered or removedfrom the product. This Limited Warranty is valid only in the UnitedStates of America. This Limited Warranty specifically excludesproducts sold by unauthorized resellers.
Page 10USA WARRANTYLIMITATION OF REMEDIESUNIVERSAL REMOTE CONTROL SHALL NOT BE LIABLE FOR ANYINCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OFANY EXPRESS OR IMPLIED WARRANTY OR CONDITION ONTHIS PRODUCT. IN NO EVENT SHALL UNIVERSAL REMOTECONTROL BE LIABLE, WHETHER IN CONTRACT OR IN TORT(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THEPURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFT-WARE, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CON-SEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUEOR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION ORDATA, SOFTWARE OR APPLICATIONS OR OTHER FINANCIALLOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITYOR INABILITY TO USE THE PRODUCTS, ACCESSORIES OR SOFT-WARE TO THE FULL EXTENT THESE DAMAGES MAY BE DIS-CLAIMED BY LAW. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,THERE IS NO OTHER WARRANTY EXPRESSED OR IMPLIED. UNI-VERSAL REMOTE CONTROL WILL NOT BE HELD RESPONSIBLEFOR STATEMENTS MADE BY OTHERS CONCERNING THE MER-CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT. Some states or jurisdictions do not allow theexclusion or limitation of incidental or consequential damages, orallow limitations on how long an implied warranty lasts, so theabove limitations or exclusions may not apply to you. This LimitedWarranty gives you specific legal rights and you may have otherrights which vary from state to state or jurisdiction to jurisdiction.REV020708
Page 11DMS-1200 MULTI-ZONE MUSIC AMPLIFIERSpecifications Audio section Rated Wattage per Channel 50W+50W(8ohms, 20Hz~20KHz with 0.1% T.H.D)140W+140W(8ohms, 1KHz with 10% T.H.D)Frequency Response 20Hz~20KHz +/-1.0dB at 8ohms 20Hz~20KHz +/-3.0dB at 4ohmsSignal to Noise Ratio 85+/- 5dBTotal Harmonic Distortion <0.06%, 20Hz~20KHzOutput connectors 8ohms, 4ohms stableInput sensitivity 600~2200mVp-p/10KohmNetwork Connectivity 10/100 BaseT Ethernet Tone Controls Bass, Treble, 5-Band parametric EQ. LVLC(low volume level control)Full Matrix Switching for Audio  YesstreamingNumber of Analog Input 4sourcesNumber of Digital Input 1Sources (S/PDIF)Speaker Output Zones 6Line level Output Zones 2 (2.2Vp-p Variable output, 2.0Vp-p fixed output level)Independent Gain Control per  YesZoneAccessories AC cord, RCA cable, User`s manual EnvironmentalOperational Temperature 32°F ~ 104°F (0°~ + 40°)Humidity 5% - 95% (Non Condensing)Storage Temperature -4°F ~ 158°F (-20°C + 60°C)GeneralPower supply AC 100-240V, 50/60HzPower consumption 850Watt maximumMaximum external Dimensions 5.25 1/32” x 17 1/18” x 16 1/1.87”H x W x D 133mm x 432mm x 420mmWeight 27lbs (12.1kg)
Page 12DMS-1200 SYSTEM CONFIGURATIONSystem Configuration for Internal LAN NetworkFollow the steps below to connect a DMS-1200 to a LAN network.1. Connect the Internet to the coaxial CABLE port in the rear of the cable modem. 2. Plug in a RJ-45 ethernet connector cable via the Ethernet port of the cable modem to the WAN port of the Router.3. Connect a second RJ-45 cable to a LAN port of the Router and plug the other end to the LAN 10/100 port on the rear of the MFS-8/MFSPOE-8 network Switch.4. Connect a third RJ-45 cable to connect the DMS-1200 LAN port to one of the eight 10/100 Smart ports. 5. Plug the power supply to the DMS-1200 and then plug it in to anunswitched AC outlet.6. Connect a digital coax cable from the DVD player to the coaxial digital input on the rear of the DMS-1200.7. Connect a PC computer to the same LAN as the DMS-1200 or plugan ethernet cable directly to the LAN port of the DMS-1200. Now thecomputer can control and adjust the manufacturer’s audio controlprogram. Select audio INPUT source and OUTPUT zone, MAC address etc.This function selects input source channel and INPUT gain level and data sent to audio equipment.After selecting the output zone, adjust the zone limit power rate andzone power ON/OFF and source signal INPUT channel.Adjust the amplifier volume level per each zone for proper sound output and maximum limitation volume level.Turn on the ramp up volume level and adjust the equalizer repertoryand low volume loudness control effectiveness and custom Equalizer align. PCInternetCable ModemWiFi RouterMFS-8DMS-1200DVD
Page 13EUROPE CERTIFICATE OFCONFORMITYEurope Certificate Of ConformityUniversal Remote Control, Inc. declares that this product complies withthe requirements CE/LVD (Low Voltage Directive, 2006/95/EC).Certificated Attestation of compliance “E8N 10 10 75224 001”is issuedaccording to the Directive 2004/108/EC relating to electromagneticcompatibility on a voluntary basis and is in compliance with the corre-sponding technical standards such as EN55013, EN55020, EN55022,EN55024/A2, EN61000-3-2, EN61000-3-3 and EN60065 A/V. A copyof the full Certificate of Conformance may be obtained at “http://www.universalremote.com”
Page 14NOTE
OCE-0100A Rev 02

Navigation menu