Ohsung Electronics URCDMSOUT Stream Injector Output Device User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. Stream Injector Output Device EMISSION TEST REPORT

Users Manual

Order Number : GETEC-C1-16-414 FCC Part 15 Certification Test Report Number : GETEC-E3-16-052 Page 1 / 1 EUT Type: Stream Injector Output Device FCC ID.: OZ5URCDMSOUT APPENDIX G : USER’S MANUAL
Universal Remote ControlDMS-OUTOwner’s Manualwww.UniversalRemote.com
Universal Remote ControlDMS-OUT Owner’s ManualOverviewThe DMS-OUT allows 3rd party devices access to the streaming sources inthe DMS Audio Network. For example, this device is the perfect solution foradding any new/existing 3rd party AVR, soundbar, or other audio device tothe DMS Audio Network.Online Help:www.urccontrolroom.comFor software downloads, training materials, and frequently asked questions.Contact Support:Total Control is a URC product sold through Authorized Dealers, forquestions or assistance contact you Custom Installer/Programmer (write inthe company name, email, and contact info):or URC Technical Support at: techsupport@universalremote.comUniversal Remote Control, Inc.500 Mamaroneck AveHarrison, New York 10528Toll Free: (800) 901-0800Main: (914) 835-4484Table of ContentsFeatures and Benefits.........................................1Parts & Pieces......................................................1Requirements......................................................1Rear Panel............................................................2Top Panel & LED States......................................4Bottom Panel.......................................................5Wiring the DMS-OUT..........................................6
Page 1Features and BenefitsThe DMS-OUT is loaded with features to provide the perfect audio experience. Enjoy features such as:●3rd Party Audio Device IntegrationDMS-OUT grants 3rd party devices the ability to use sources that are available in the DMS Audio Stream.●Audio Sensing CapabilityThe DMS-OUT, similar to the URC Audio Sensor (SEN-AUD), can detect an audio signal which can then trigger n activity (macro).●Flexible Power SourceUse the supplied 5V DC power adapter or take advantage of the DMS-OUT’s PoE (Power Over Ethernet) capability using a CAT 5/6 wiring.DMS-OUT Owner’s ManualParts & PiecesContained within the DMS-OUT box:1. DMS-OUT Preamplifier Device2. 5v DC Power Adapter3. Wall Mount and 4x ScrewsRequirementsAs with all Total Control products, the DMS-OUT is not aplug-and-play device. It requires programming by acertified Total Control installer in order to work properly.Be sure the system contains the following:●MFS-8 or MFSPOE-8●MRX-10 or MRX-8 Master System Controller●URC User Interface (TRC-1080, TKP-7000, etc.)
Page 2DMS-OUT Owner’s ManualRear Panel:5V DC Input:Provides power to the DMS-OUT. PoE may be usedas a substitute.Analog Input:Standard RCA (analog) connector.Digital Input - Optical:This input uses standard S/PDIF OPTICAL TOSLINKconnector.Note: The DMS-OUT converts Dolby Digital 5.1/DTS 5.1to a DMS Stream.
Page 3LAN Port:This 10/100 Ethernet port supports PoE and sendsthe URC Audio stream through the local network,this is also how the DMS-OUT receives commandsand sends audio.Note: The DMS-OUT does not support Wi-FiDigital Input - Coax:Standard RCA (analog) connector, this receivesbitstreams of audio data.Note: The DMS-OUT converts Dolby Digital 5.1/DTS 5.1to a DMS Stream.DMS-OUT Owner’s Manual
Page 4DMS-OUT Owner’s ManualTop Panel & LED States:There are three (3) LED lights at the top of the DMS-OUT which can provide users with basic troubleshooting information.Status LED●Off Unit has not been programmed with a Total Control file.●YellowUnit has been programmed with a Total Control file; however, is not creating a DMS Audio Stream.●Blue Unit has been programmed with a Total Control file and is creating a DMS Audio Stream through the network.Power LED●Off Unit is not receiving power.●BlueUnit is receiving power via 5V DC adapter or PoE.
Page 5DMS-OUT Owner’s ManualNetwork LED●OffUnit is not connected to the local area network and cannot send/receive data.●Blinking GreenUnit is connected to the local network, but has not received an IP address.●Green Unit is connected to the local network and has an IP address.Bottom PanelLocated beneath the DMS-OUT is a Reset button. The Reset button is recessed so apaperclip or something similar is required to press. This button allows for:●Rebooting the DMS-OUT A momentary press of the Reset button reboots the DMS-OUT, similar to unplugging it from the power supply.●Factory Default Pressing and holding the Reset button for ten (10) seconds or longer, factory resets the DMS-OUT to its factory state. The DMS-OUT requires re-programming after this has been performed.
Page 6DMS-OUT Owner’s ManualWiring the DMS-OUTIn order for the DMS-OUT to provide the best possible experience, it must be first wired correctly then programmed by a Total Control CertifiedInstaller. Follow these steps to prepare the DMS–IN for programming:1. Power the DMS-OUT with the supplied 5V DC adapter OR PoE using the LAN port (see below)2. Connect and Ethernet cable from the LAN 10/100 port to an MFS-8/MFSPOE-8●The 5V DC adapter is not required when using PoE3. Connect the DMS-OUT to a 3rd party device via Analog or Digital that is to be a part of the DMS Audio StreamAdditional set up is required via the URC Accelerator software. Contact a Certified Total Control Installer to properly configure the DMS-OUT to anew or existing system.OROnly one source can be used at a time, further audioadjustments can be made from within Accelerator.
SpecificationsMicroprocessor: Cortex-A5 600MHzMemory: 128MB NAND, 128MB RAMNetwork: One 10/100 Ethernet port (PoE)Weight: 5.8ozSize: 4.6” x 4.6” x 1.2”Power: Standard PoE Injector or PoE Switch (purchased separately), DC 5V/1APage 7DMS-OUT Owner’s Manual
Page 8Limited Warranty Statement1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipment shall be free from defects in material and workmanship under normal usage for one (1) year from purchase when such is purchased from URC. This limited warranty is valid only in the United States of America. URC warrants that the software will substantially conform in any material respect to its functional specifications at the time of delivery. URC SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OR OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE. URC warrants that at the time of purchase the URC equipment and the URC software complied with all applicable regulations and policies of the Federal Communications Commissions (“FCC”) regarding electromagnetic interference caused by electronic/computing devices and to the extent that the URC equipment and/or the URC software fails to so comply, URC shall, at its own expense, take all reasonable measures to promptly cause such to comply.URC equipment purchases from other than an authorized URC dealer or distributor are without warranty. THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE AND DOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY ANDDMS-OUT Owner’s Manual
Page 9 FITNESS FOR A PARTICULAR PURPOSE. URC DOES NOT WARRANT, GUARANTEE, OR MAKE ANY REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE SKILL AND CARE, OR OUTCOME OR RESULTS. WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER PROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGE FROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTY CLAIM PROCEDURE. The warranty limitations and warranty disclaimers may not apply to end user in whole or in part, where such are restricted or excluded by applicable law and such shall apply to the maximum extent permitted by applicable law. In the event of any warranty claim, URC will, at its sole option, repair the URC equipment using new or comparable rebuilt parts, or exchange the URC equipment for new or rebuilt equipment. In the event of a defect, these are the end user’s exclusive remedies. All the URC equipment returned for service, exchange or repair require an RGA number. To obtain an RGA number, you must complete a Return Request Form which you may obtain by calling (914) 835-4484 or contacting URC at returnrequest@universalremote.com. To obtain warranty service, end user must deliver the URC equipment, freight prepaid, in its original packaging or packagingDMS-OUT Owner’s Manual
Page 10 affording adequate protection to URC at 420 Columbus Avenue, Valhalla, NY 10595. It is end user’s responsibility to backup any macro programming, artwork, software or other materials that may have been programmed into the unit. It is likely that such data, software, or other materials will be lost during service and URC will not be responsible for any such damage or loss. A dated purchase receipt, bill of sale, installation contract or other verifiable proof of purchase is required. For the URC equipment support and other important information, please visit URC's website available at www.universalremote.com or call the Customer Service Center at (914) 835-4484. This limited warranty only covers the URC equipment issues caused by defects in material or workmanship during ordinary consumer use. It does not cover product issues caused by any other reason, including but not limited to product issues due to commercial use, acts of God, third-party installation, misuse, limitations of technology, or modification of or to any part of the URC equipment. This limited warranty does not cover the URC equipment sold as used, as is, refurbished, so called "B stock" or consumables (such as batteries). This limited warranty is invalid if the factory applied serial number has been altered or removed from the URC equipment. This limited warranty specifically excludes the URC equipment sold by unauthorized resellers. With the exception of URC’s IR-only, broad-based consumer remotes, none of Page 36 URC’s PC programmable remotes or any of our Total Control® whole- house equipment are authorized for online internet sales. Buying URC’s PC programmable remotes or any of our Total Control® wholehouse equipment online means buying equipment that does not have a URC’s limited warranty. Such equipment is not eligible for URC tech support or software support, either.DMS-OUT Owner’s Manual
Page 112. URC’s Limitations of Liability IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS. URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL BE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS PAID BY END USER FOR THE URC EQUIPMENT. IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE. IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END USER OR ANY THIRD PARTY. THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR EXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW. URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY OTHERS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR JURISDICTION TO JURISDICTION.DMS-OUT Owner’s Manual
Page 12End User AgreementThe terms and conditions of the End User Agreement available atwww.universalremote.com/eua.php shall apply.Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference by one more of the followingmeasures:●Reorient or relocate the receiving antenna.●Increase the separation between the equipment and receiver.●Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.●Consult the dealer or an experienced radio/TV technician for help.DMS-OUT Owner’s Manual
Page 13Warning!Changes or modifications not expressly approved by the manufacturer could void theuser's authority to operate the equipment.Note: The manufacturer is not responsible for any Radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user’sauthority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to the followingtwo conditions: (1) this device may not cause harmful interference, and (2) this devicemust accept any interference received, including interference that may cause undesiredoperation.Any changes or modifications not expressly approved by the party responsible forcompliance could void the authority to operate equipment.DMS-OUT Owner’s Manual
Page 14Regulatory Information to the user●CE conformity Notice Products with “CE” marking comply EMC Directive 2014/30/EU issued by the commission of the European Community.1. EMC Directive●Emission :EN 55032●Immunity :EN 55024, EN55020●Power :EN-61000-3-2, 3●Declaration of Conformity “Hereby, Universal Remote Control Inc. declares that this DMS-OUT is in compliance with the Essential requirements:DMS-OUT Owner’s ManualCertificationType No.(Model No.) DMS-OUTBatch/Serial No. -Power Rating 48.0V , 0.32A, DC 5V 1A
DMS-OUT Owner’s ManualDeclaration of ConformityCompany Name : Universal Remote Control Inc.Company Address : 500 Mamaroneck Avenue, Harrison, NY 10528, U.S.AContact Information : Phone: (914)835-4484 Fax: (914)835-4532Brand Name : UNIVERSAL remote controlProduct Name : Stream Injector Output DeviceModel Name : DMS-OUTThis product herewith complies with the requirements of EMC Directive (2014/30/EU)issued by the Commission of the European CommunityCompliance with these directives implies conformity to the following European CommunityEMC DirectiveEN 55032EN 55020EN 55024EN 61000-3-2EN 61000-3-3List of test reports and/or certificate verified compliance with the standards aboveEMC DirectiveReport No. GETEC-E2-16-110Testi ng Labora tory : Gumi University EMC Centerwww.universalremote.comDate of issue : December 01, 2016Name and signature of authorized person : James NovakDirector of ProductUniversal Remote Control Inc.

Navigation menu