Ohsung Electronics URCML600L RF Remote Controller User Manual I
Ohsung Electronics Co., Ltd. RF Remote Controller I
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1014493 |
| Application ID | PPf2pzSYFpPiXvszIN0MUA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 160.43kB (2005387 bits) |
| Date Submitted | 2008-10-14 00:00:00 |
| Date Available | 2008-11-28 00:00:00 |
| Creation Date | 2008-10-13 20:06:56 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2008-10-14 11:01:50 |
| Document Title | Microsoft Word - I_User manual.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | EMC CENTER |
Test Report Number: GETEC-E3-08-044 FCC Part 15 Subpart C APPENDIX I : USER’S MANUAL EUT Type: RF Remote Controller FCC ID.: OZ5URCML600L Crestron ML-600 Mini LCD RF Wireless Handheld Remote Operations Guide This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc Crestron ML-600 Mini LCD RF Wireless Handheld Remote Contents Mini LCD RF Handheld Remote: ML-600 Introduction .............................................................................................1 Features and Functions ...................................................................1 Specifications................................................................................. 2 Physical Description ...................................................................... 2 Miscellaneous ........................................................................................ 8 Using the Backlight ....................................................................... 8 Installing/Changing the Batteries .................................................. 8 Adjusting the Display Contrast...................................................... 9 Cleaning the Screen ....................................................................... 9 Problem Solving................................................................................... 10 Troubleshooting........................................................................... 10 Further Inquiries .......................................................................... 10 Industry Compliance.................................................................... 11 Operations Guide - DOC. 6446 Contents • Crestron ML-600 Mini LCD RF Wireless Handheld Remote Mini LCD RF Handheld Remote: ML-600 Introduction Features and Functions The Crestron® Mini LCD RF Handheld Remote (ML-600) is a universal remote control that can be used to control a Crestron system. A liquid-crystal display (LCD) with switchable backlighting provides the user with a listing of available functions and system commands. With a wireless range of up to 200 feet, the ML-600 can be used almost anywhere in a home or facility. The remote is powered by four AAA batteries (included). Functional Summary • Easy-to-use preprogrammed functions for your Crestron system • 2.1” x 1.4” backlit, LCD screen for function selection • Ten preprogrammed soft keys which can be used to access custom command sequences, system functions, and preferences • Storage for 50 preprogrammed “favorite” functions and/or settings • Up to 200-foot RF wireless range allows system control from almost anywhere in a building • Intuitive interface for easy operation • Five directional buttons for navigating on-screen menus found on A/V devices • Transport controls for controlling a variety of audio and video sources • Volume and channel controls • Numeric keypad for entry of numeric data • Switchable backlighting for viewing display and buttons in a variety of lighting conditions Operations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Mini LCD RF Wireless Handheld Remote Crestron ML-600 Specifications The following table lists specifications for the ML-600. Specifications for the ML-600 SPECIFICATION DETAILS Battery Power 6.0 VDC (Four AAA Alkaline batteries supplied) RF Output 418 MHz RF Range Up to 200 feet (depending on physical structures and electronic interference) Buttons (1) “ON” button (1) “OFF” button (10) “Soft” buttons (3) Menu navigation buttons (32) “Hard” buttons including a numeric keypad, transport controls, and directional controls LCD Screen 2.10” x 1.40” (5.33 cm x 3.56 cm) Backlighting Switchable backlighting for buttons and LCD screen. Automatic shutoff after 15 seconds. Enclosure High impact, rubberized plastic enclosure Operating Temperature and Humidity 50º to 113º F (10º to 45º C), 10 to 90% Relative Humidity (non-condensing) Dimensions and Weight (with batteries) Height: 9.05 in (22.99 cm) Width: 3.07 in (7.80 cm) Depth: 1.40 in (3.56 cm) Weight: 0.5 lbs (0.23 kg) Physical Description The ML-600 (refer to the following illustrations) has a 2.10” x 1.40” (5.33 cm x 3.56 cm) LCD screen. The LCD screen lists the options associated with the 10 preprogrammed soft keys that flank the LCD screen. Three navigation keys are used to switch between control screens on the remote control. There are 34 buttons that are used for device-specific functions. A button on the right side of the remote switches the display/keypad backlighting on and off. For information on the operation of the ML-600, refer to “Menu System” on page 5. 2 • Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446 Crestron ML-600 Mini LCD RF Wireless Handheld Remote ML-600, Front View Operations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Mini LCD RF Wireless Handheld Remote Crestron ML-600 Physical Views of the ML-600 3.07 in (7.80 cm) 1.40 in (3.56 cm) 9.05 in (22.99 cm) 4 • Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446 Crestron ML-600 Mini LCD RF Wireless Handheld Remote Menu System The ML-600 uses a menu to access all of the functions the remote is capable of performing. The menu has a MAIN section that can contain up to two pages. These main pages can list up to 19 groups of options. Depending on your remote’s configuration, each option can be a selection of a room, device, or system function. Each group can contain up to four pages. Each page lists up to 10 additional options. There is also a “Favorites” section that can contain up to 50 favorite functions or settings that are listed on five pages (up to 10 functions or settings per page). The following diagram illustrates the structure of ML-600’s menus. ML-600 Menu Structure MAIN PAGE MAIN PAGE PAGE FAVORITES PAGE 1 FAV FAVORITES PAGE 2 10 GROUPS OF OPTIONS: EACH GROUP CAN CONTAIN UP TO 40 OPTIONS GROUPS ... 10 9 GROUPS OF OPTIONS: EACH GROUP CAN CONTAIN UP TO 40 OPTIONS GROUPS 11 ... 19 FAV FAVORITES PAGE 3 FAV FAV FOUR PAGES OF OPTIONS (UP TO 10 OPTIONS/PAGE) FAVORITES PAGE 4 FAV FAVORITES PAGE 5 DEPENDING ON YOUR SYSTEM CONFIGURATION, AN OPTION CAN BE A ROOM SELECTION, DEVICE SELECTION, OR COMMAND All of the available options are shown on the LCD screen and are selected with the soft keys that flank the LCD. You can scroll through pages in the menu system by using the navigation keys and operate devices in the system with the hard keys. For instructions on using the navigation keys, refer to “Navigation Keys” on page 6. LCD Display & Soft Keys The LCD screen shows the current location within the menu system as well as the options that are assigned to each soft key. MAIN THTR M BED GREAT MBATH DINE BED 1 STUDY BED 2 DEN The top line of the screen indicates the name of the page or group while the bottom line shows the page number (if applicable). The illustration to the left shows a sample MAIN page, which is indicated by the word “MAIN” on the top and bottom lines of the screen. POOL MAIN SOFT KEYS NOTE: The MAIN section may contain up to two pages. Ten soft keys flank the sides of the LCD. A soft key differs from a hard key, as it does not have a fixed function. The assigned option of each soft key is shown on the LCD adjacent to a corresponding soft key. The options listed on the LCD change from page to page. Pressing a soft key will carry out the assigned option. Operations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Mini LCD RF Wireless Handheld Remote Crestron ML-600 NOTE: The remote control is transmitting to the system when the indicator is displayed. The remote will not respond to a new button push while it is transmitting. Navigation Keys The three navigation keys located under the LCD are used to view the different pages in the menu system. PAGE After pressing a group’s soft key from a MAIN page, press the PAGE button to view pages within the selected group. After reaching the final page in a group (either page 2, 3, or 4), pressing PAGE once more returns the display to the first page in the group. Refer to the following illustration. The PAGE button can also be used to scroll through pages in the MAIN section. Navigating Through a Group Using the PAGE Button MAIN THTR M BED GREAT MBATH DINE BED 1 STUDY BED 2 DEN POOL MAIN SOFT KEY PRESS THTR THTR XM FM PAGE AM/WX HVAC TIVO LIGHT DVD DRAPE THTR TEMP+ HUM+ TEMP- HUM- HOLD RUN P FDIM+ PAGE BACK PAGE 1 THTR FULL FDIM- PRE 1 RDIM+ PRE 2 RDIM- PRE 3 BACK PAGE 2 PAGE OPEN CLOSE OFF PAGE 3 PAGE 4 PAGE MAIN Press MAIN at any time to return the LCD to the main page. If MAIN is pressed while viewing favorites, the display returns to the page that was displayed before pressing FAV. FAV Press FAV to view up to five pages containing up to 50 of your favorite functions and/or settings. Scroll forward through the list by pressing FAV. Pressing PAGE scrolls in reverse as shown in the following diagram. 6 • Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446 Crestron ML-600 Mini LCD RF Wireless Handheld Remote Scrolling Through Favorites Using the FAV and PAGE Buttons FAVORITES PAGE 1 PAGE FAV FAVORITES PAGE 2 PAGE PAGE FAV FAVORITES PAGE 3 PAGE FAV FAV FAVORITES PAGE 4 PAGE FAV FAVORITES PAGE 5 Hard Keys The hard keys are used to switch power to the devices in your system and control device-specific functions within the system. ON/OFF Use these buttons to switch power to the devices in your system. If the remote’s batteries are running low, the bottom of the LCD display will flash “LOW BATTERY”, whenever the ON button is pressed. Refer to “Installing/Changing the Batteries” on page 8 for instructions on changing batteries. Device Control These hard keys consist of buttons for volume and channel control, accessing and using on-screen menus, operating transport functions, a numeric keypad and directional control. The numeric keypad may be used to select a channel when controlling a television, while the transport controls may be used to control a VCR or DVD player. The directional control buttons can be used to navigate on-screen menus found on A/V devices as well as other functions. To select an on-screen option with the directional controls, press the SEL button. LIGHT Located on the right side of the remote, the LIGHT button is used to turn the key/display backlighting on and off. For more information on backlighting, refer to “Using the Backlight” on the following page. Programming Port Located on the left side of the remote, the programming port is used by a Crestron dealer to program the ML-600 for use with a Crestron system. Do not connect any devices to this port. Operations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Mini LCD RF Wireless Handheld Remote Crestron ML-600 Miscellaneous Using the Backlight If it is difficult to see the display or buttons when viewing the remote, the ML-600 backlight can be used to light up the display and buttons. Turn on the backlight by pressing the LIGHT button on the right side of the remote control. The backlighting will stay on, and then automatically turn off after approximately 15 seconds. If you wish to turn off the backlighting without waiting, press the LIGHT button again. NOTE : Battery life is reduced with frequent use of the backlight feature. Installing/Changing the Batteries If the batteries are running low, the bottom of the LCD display will flash “LOW BATTERY” whenever the ON button is pressed. Low batteries may shorten the operating range of the ML-600. To change the batteries, perform the following: 1. While viewing the back of the ML-600, press the latch on the battery cover (shown in the following illustration) and remove it. Battery Cover Removal 2. Remove old batteries (if installed) and insert new batteries with the indicated polarity inside the battery compartment. The remote will run a diagnostic test. NOTE : Replace all of the batteries at the same time. Do not mix old and new batteries. NOTE : The ML-600 will retain its program even when the batteries are removed for an extended period. 3. Replace the battery cover. 8 • Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446 Crestron ML-600 Mini LCD RF Wireless Handheld Remote Adjusting the Display Contrast The LCD display’s contrast can be adjusted for optimal viewing. To make the display darker, press the UP button while holding the MAIN button. Refer to the following diagram. Adjusting Display Contrast To make the display lighter, press the DOWN button while holding the MAIN button. Cleaning the Screen WARNING: Do not use abrasives or liquid cleaning solutions. Doing so can scratch the LCD or damage internal electrical components. Use a dry, soft, lint-free cloth to clean the screen. Be careful not to use excessive force. The screen is made of glass and is easily breakable. Operations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • Mini LCD RF Wireless Handheld Remote Crestron ML-600 Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact the Crestron dealer that programmed your system. ML-600 Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Display is too dark. Contrast is set wrong. Display is too light. Contrast is set wrong. Adjust contrast setting. Batteries are running low. Replace batteries. System does not Devices are not respond to commands powered up. from the ML-600. Adjust contrast setting. Check power to devices. Check that devices are on. Batteries are running low. Replace batteries. RF Gateway not functioning. Check power to RF Gateway. Further Inquiries If after reviewing this Operations Guide for the ML-600, you cannot locate specific information or have questions, please contact your local Crestron dealer. 10 • Mini LCD RF Wireless Handheld Remote Operations Guide – DOC. 6446 Crestron ML-600 Mini LCD RF Wireless Handheld Remote Industry Compliance As of the date of manufacture, this unit has been tested and found to comply with specifications for CE marking. NOTE : This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and transceiver. • Connect the equipment into an outlet on a circuit different from that to which the transceiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Operations Guide – DOC. 6446 Mini LCD RF Wireless Handheld Remote • 11 Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com OCE-0016M REV 01 Operations Guide – DOC. 6446 (2014165) 02.06 Specifications subject to change without notice. Information To The User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note : The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. Universal Remote Control® Universal Remote Control, Inc. 500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf Linearized : No Page Count : 17 PDF Version : 1.6 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e23a370e-3bec-49a3-9214-fe5a575ef5b7 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2008:10:13 20:06:56+09:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2008:10:14 11:01:50+09:00 Metadata Date : 2008:10:14 11:01:50+09:00 Document ID : uuid:a9b6a8b8-b53d-4929-9f5d-cacec42f2111 Format : application/pdf Creator : EMC CENTER Title : Microsoft Word - I_User manual.doc Author : EMC CENTEREXIF Metadata provided by EXIF.tools