Ohsung Electronics URCMRX4SEN2 Sensor Extender User Manual H User s Manual

Download:
Mirror Download [FCC.gov]
Document ID	2995454
Application ID	blnHCmUoPGb+Z6BSjhToYA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	186.94kB (2336720 bits)
Date Submitted	2016-05-18 00:00:00
Date Available	2016-07-02 00:00:00
Creation Date	2016-05-12 23:32:10
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-05-12 23:35:32
Document Title	Microsoft Word - H_User_s Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	C1A4BCF8C8C6

Order Number
: GETEC-C1-16-182
FCC Part 15 subpart C
Test Report Number
: GETEC-E3-16-021
Page 1 / 1
APPENDIX H
: USER’S MANUAL
EUT Type: Sensor Extender
FCC ID.: OZ5URCMRX4SEN2
●
●
●
●
Thank you for purchasing the MRX-4SEN2 Sensor Extender. Expand your
MRX-Advanced Network System Controller sensor coverage by adding
additional MRX-4SEN2 units throughout the home or office. Take
advantage of the networking capabilities and control your MRX-4SEN2 via
Wi-Fi or wired connection.
●
The MRX-4SEN2 utilizes the network (wired or wireless) for a more
stable communication to the Total Control System that is less
susceptible to interference and more reliable. This grants you the
flexibility to install it virtually anywhere in the project.
●
Add one or more MRX-4SEN2 throughout you system to add more
triggers to your connected home. This may be used to initiate system
events in Total Control.
●
The small size of the MRX-4SEN2 allows it to easily fit behind
equipment or into places where a traditional base station would not.
The MRX-4SEN 2 Includes:
1 - MRX-4SEN2 Sensor Extender
1 -Mounting Plate
1 - AC Power Adapter
1 - Owner’s Manual
4- Mounting Screws
Page 1
Front Panel
The front panel consist of three indicator lights:
Illuminates red when connected to power.
The LED color varies depending on the device’s
Wi-Fi connection:
●
Illuminates green
●
Illuminates orange
●
Not illuminated
This LED flashes as the MRX-4SEN2 transmits data to the
MRX Advanced System Controller.
Page 2
Rear Panel
The rear panel consist of:
Plug in the included 5V DC 1A power supply.
Connect the sensor’s 3.5mm plug to an available port.
The following URC sensors, with their respective model numbers, are
compatible with the MRX-4SEN2:
● Voltage Sensor SEN-VOLT
● Video Sensor SEN-VID
● Contact Closure Sensor SEN-CCLS
● Light Sensor SEN-LITE
● Current Sensor (Magnetic Field) SEN-CMF
● Audio Sensor SEN-AUD
If a wired connection is needed, this port uses a
standard Ethernet (RJ-45) plug to communicate via the local area
network (LAN).
Page 3
Bottom Panel
The bottom panel consists of:
The serial number, located at the bottom of
the unit, uniquely identifies the product.
The MAC Address (12 numbers) identifies this
device when connected to the network.
Functions with other wireless devices
(routers, wireless access points, etc.) to provide a simplified method
of connection to the network. Press this button in conjunction with
the WPS button found on your other wireless devices to establish
a connection.
Turns the unit OFF then ON again and reconnects to
the network.
Page 4
Before proceeding, a Custom Professional is required to install
and configure you MRX-4SEN2.
Connect the 3.5mm sensor plug to the rear of the MRX-4SEN2. When a
change in the sensor’s state is detected, the MRX-4SEN2 sends a signal
to the MRX Advanced System Controller and triggers a series
of
commands.
The example below showcases a voltage sensor connected to the home’s
doorbell and the MRX-4SEN2. Whenever the doorbell is pressed, a signal
is sent over the network (wired or wireless) to the MRX Advanced System
Controller. The MRX unit, previously programmed by the Custom
Professional, triggers a series of commands or an event to gain your
attention. A programmed event, such as Watch Movie/TV, may pause the
movie, mute the audio, and display the front door’s video camera.
Page 5
Wireless Setup
The key feature added to the MRX-4SEN2 is adding Wi-Fi
connectivity to an already brilliant sensor expander. Wi-Fi connection
makes it simple to install the device in difficult to reach locations of
the home.
Steps:
Go to
and select
Page 6
2. Fill out the wireless network information in the
window, when finished select
3. Press
4. Select
located below
from the sub menu in Step 6
5. Discover the MRX-4SEN2 (if you have not already) using the
method for all other URC network devices
Page 6
6. Highlight the MRX-4SEN2 and double-click on the area that
reads
7. Select
via Network
Page 7
8. Unplug the Ethernet cable from the back of the MRX-4SEN2
unit.
Page 8
Universal Remote Control, Inc. (“URC”) warrants that URC equipment
purchased directly from URC or from an authorized URC dealer or
distributor shall be free from defects in material and workmanship under
normal usage for a period of one (1) year from the date of purchase of
the product by the end-user, but no longer than thirty-six (36) months
from the date of shipment of the URC equipment by URC to an authorized
URC dealer or distributor, except that with respect to Total Control®
whole-house products, the warranty extends for two (2) years from the
date of purchase by the end-user, but no longer than forty-eight (48)
months from the date of shipment of the URC equipment by URC to an
authorized URC dealer or distributor.
URC warrants that the software will substantially conform in any material
respect to its functional specifications at the time of delivery. URC SHALL
NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS
AND/OR OMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOT
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE OR
THAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE.
URC warrants that at the time of purchase the URC equipment and the
URC software complied with all applicable regulations and policies of the
Federal Communications Commission ("FCC") regarding electromagnetic
interference caused by electronic/computing devices and to the extent
that the URC equipment and/or the URC software fails to so comply, URC
shall, at its own expense, take all reasonable measures to promptly cause
such to comply.
THIS LIMITED WARRANTY DOES NOT COVER TECHNICAL ASSISTANCE FOR
HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLY PROVIDED FOR
HEREIN.
Page 9
CERTAIN IMPLIED WARRANTIES, INCLUDING AN IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, MAY BE
AVAILABLE WITH RESPECT TO URC EQUIPMENT. IMPLIED WARRANTIES
VARY FROM STATE TO STATE. URC EXPRESSLY LIMITS THESE IMPLIED
WARRANTIES, TO THE EXTENT ALLOWABLE BY LAW, TO THE TIME PERIODS
COVERED BY THE EXPRESS WRITTEN WARRANTIES PROVIDED HEREIN.
OTHERWISE AND EXCEPT AS PROVIDED FOR HEREIN, URC EXPRESSLY
DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY OR IMPLIED, AND
MAKES NO REPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS
OF THE USE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION IN
TERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE.
EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICES ARE
SUPPLIED "AS IS", WITHOUT ANY WARRANTY, EXPRESS, STATUTORY OR
IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALL WARRANTIES RELATING
TO TECHNICAL SERVICES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING
BUT NOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLE
SKILL AND CARE, OR OUTCOME OR RESULTS.
WITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHER
PROVISIONS HEREIN, THIS LIMITED WARRANTY DOES NOT COVER: (I)
DAMAGE FROM MISUSE, NEGLECT OR ACTS OF NATURE, (II)
MODIFICATIONS, (III) INTEGRATION WITH THIRD PARTY CONTENT, OR (IV)
BEYOND THE WARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC
WARRANTY CLAIM PROCEDURE.
The warranty limitations and warranty disclaimers may not apply to end
user in whole or in part, where such are restricted or excluded by
applicable law, and such shall apply to the maximum extent permitted by
applicable law.
In the event of any warranty claim, URC will, at its sole option, repair the
URC equipment using new or comparable rebuilt parts, or exchange the
URC equipment for new or rebuilt equipment.
All the URC equipment returned for service, exchange or repair require an
RGA number. To obtain an RGA number, you must complete a Return
Page 10
Request Form which you may obtain by calling (914) 835-4484 or
contacting URC at returnrequest@universalremote.com
. To obtain warranty service, end user must deliver the URC equipment,
freight prepaid, in its original packaging or packaging affording adequate
protection to URC at 420 Columbus Avenue, Valhalla, NY 10595. It is end
user's responsibility to backup any macro programming, artwork,
software or other materials that may have been programmed into the
unit. It is likely that such data, software, or other materials will be lost
during service and URC will not be responsible for any such damage or
loss. A dated purchase receipt, bill of sale, installation contract or other
verifiable proof of purchase is required. For the URC equipment support
and other important information, please visit URC's website available at
www.universalremote.com or call the Customer Service Center at (914)
835-4484.
This limited warranty only covers the URC equipment issues caused by
defects in material or workmanship during ordinary consumer use. It
does not cover product issues caused by any other reason, including but
not limited to product issues due to commercial use, acts of God, thirdparty installation, misuse, limitations of technology, or modification of or
to any part of the URC equipment. This limited warranty does not cover
the URC equipment sold as used, as is, refurbished, so called "B stock" or
consumables (such as batteries). This limited warranty is invalid if the
factory applied serial number has been altered or removed from the URC
equipment. This limited warranty specifically excludes the URC
equipment sold by unauthorized resellers.
With the exception of URC's IR-only, broad-based consumer remotes,
none of URC's PC programmable remotes or any of our Total Control®
whole-house equipment are authorized for online Internet sales. Buying
URC's PC programmable remotes or any of our Total Control® wholehouse equipment online means buying equipment that does not have
URC's limited warranty. Such equipment is not eligible for URC tech
support or software support, either.
Page 11
IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL, INCIDENTAL,
EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND OR
LOSS OF PROFITS OR BUSINESS OPPORTUNITY, EVEN IF URC IS ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TO DATA,
COMPUTER SYSTEMS OR COMPUTER PROGRAMS.
URC'S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALL BE
LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTS PAID BY
END USER FOR THE URC EQUIPMENT.
IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITS
CONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.
IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OF END
USER OR ANY THIRD PARTY.
THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER IN WHOLE
OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OR EXCLUDED BY
APPLICABLE LAW AND SUCH SHALL APPLY TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW.
URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADE BY
OTHERS.
SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO END USER. THIS
LIMITED WARRANTY GIVES END USER SPECIFIC LEGAL RIGHTS AND END
USER MAY HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR
JURISDICTION TO JURISDICTION.
The terms and conditions of the End User Agreement available at
www.universalremote.com/eua.php shall apply.
Page 12
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one more of the following measures:
❑ Reorient or locate the receiving antenna.
❑ Increase the separation between the equipment and receiver.
❑ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
❑ Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Note: The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Page 13
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate
equipment.
The device and the antenna for this device must be installed to ensure a
minimum separation distance of 20 cm more from a person's body. Other
operating configurations should be avoided.
Page 14
Page 15

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : 
Create Date                     : 2016:05:12 23:32:10+09:00
Modify Date                     : 2016:05:12 23:35:32+09:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Title                           : Microsoft Word - H_User_s Manual
Creator                         : 
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2016:05:12 23:35:32+09:00
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:eebe06fd-10e6-4220-95a6-bfdf2e2704a0
Instance ID                     : uuid:121b581f-7d63-424e-a7ba-afa8da2042e7
Page Count                      : 20

EXIF Metadata provided by EXIF.tools